Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural beams”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Investigation of the ground-state spin inversion in the neutron-rich Cl 47 , 49 isotopes

A first γ -ray study of Cl 47 , 49 spectroscopy was performed at the Radioactive Isotope Beam Factory with Ar 50 projectiles at 217 MeV/nucleon, impinging on the liquid hydrogen target of the MINOS device. Prompt deexcitation γ rays were measured with the NaI(Tl) array DALI2 + . Through the one-proton knockout reaction Ar 50 ( p , 2 p ) , a spin assignment could be determined for the low-lying states of Cl 49 from the momentum distribution obtained with the SAMURAI spectrometer. A spin-parity J π = 3 / 2 + is deduced for the ground state of Cl 49 , similar to the recently studied N = 32 isotope K 51 . The evolution of the energy difference E ( 1 / 2 1 + ) - E ( 3 / 2 1 + ) is compared to state-of-the-art theoretical predictions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Formation and study of p–i–n structures based on two-phase hydrogenated silicon with a germanium layer in the i-type region

Four pairs of p–i–n structures based on polymorphous Si:H (pm-Si:H) are fabricated by the method of plasma-enhanced chemical vapor deposition. The structures in each pair are grown on the same substrate so that one of them does not contain Ge in the i-type layer while the other structure contains Ge deposited by molecular-beam epitaxy as a layer with a thickness of 10 nm. The pair differ from one another in terms of the substrate temperature during Ge deposition; these temperatures are 300, 350, 400, and 450°C. The data of electron microscopy show that the structures formed at 300°C contain Ge nanocrystals (nc-Ge) nucleated at nanocrystalline inclusions at the pm-Si:H surface. The nc-Ge concentration increases as the temperature is raised. The study of the current–voltage characteristics show that the presence of Ge in the i-type layer decreases the density of the short-circuit current in p–i–n structures when they are used as solar cells, whereas these layers give rise to an increase in current at a reverse bias under illumination. The obtained results are consistent with known data for structures with Ge clusters in Si; according to these data, Ge clusters increase the coefficient of light absorption but they also increase the rate of charge-carrier recombination.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Modelling an electro-optical modulator based on a vertical p – n junction in a silicon-on-insulator structure

We report the results of numerical simulation of a Mach – Zehnder electro-optical modulator using beam splitters based on multimode interference in a silicon-on-insulator structure. The control is provided due to the depletion effect in the vertical p – n junction, which can be fabricated using the self-alignment technology. An optimal modulator design is proposed, which impedance is matched with an external 50-Ω load, for which, with a reverse bias of – 5 V and an active length of 1.7 mm, the optical frequency bandwidth of ∼ 50 GHz can be achieved. A special doping profile of the p – n junction of the modulator is presented, which provides an optical frequency bandwidth of 30 GHz with a reverse bias of –3 V and a modulator length of 2.5 mm. Such modulators can be used in integrated optics, optical communications and radio photonics devices. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

An immersed boundary method for fluid–structure interaction with compressible multiphase flows

This paper presents a two-dimensional immersed boundary method for fluid–structure interaction with compressible multiphase flows involving large structure deformations. This method involves three important parts: flow solver, structure solver and fluid–structure interaction coupling. In the flow solver, the compressible multiphase Navier–Stokes equations for ideal gases are solved by a finite difference method based on a staggered Cartesian mesh, where a fifth-order accuracy Weighted Essentially Non-Oscillation (WENO) scheme is used to handle spatial discretization of the convective term, a fourth-order central difference scheme is employed to discretize the viscous term, the third-order TVD Runge–Kutta scheme is used to discretize the temporal term, and the level-set method is adopted to capture the multi-material interface. In this work, the structure considered is a geometrically non-linear beam which is solved by using a finite element method based on the absolute nodal coordinate formulation (ANCF). The fluid dynamics and the structure motion are coupled in a partitioned iterative manner with a feedback penalty immersed boundary method where the flow dynamics is defined on a fixed Lagrangian grid and the structure dynamics is described on a global coordinate. We perform several validation cases (including fluid over a cylinder, structure dynamics, flow induced vibration of a flexible plate, deformation of a flexible panel induced by shock waves in a shock tube, an inclined flexible plate in a hypersonic flow, and shock-induced collapse of a cylindrical helium cavity in the air), and compare the results with experimental and other numerical data. The present results agree well with the published data and the current experiment. Finally, we further demonstrate the versatility of the present method by applying it to a flexible plate interacting with multiphase flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

SHarD: A beam dynamics simulation code for dielectric laser accelerators based on spatial harmonic field expansion

In order to demonstrate acceleration of electrons to relativistic scales by an on chip dielectric laser accelerator (DLA), a ponderomotive focusing scheme capable of capturing and transporting electrons through nanometer-scale apertures over extended interaction lengths has been proposed. Here we present a Matlab-based numerical code (SHarD) utilizing a spatial harmonic expansion of the fields within the dielectric structure to simulate the evolution of the beam phase space distribution in this scheme. The code can be used to optimize key-parameters for the accelerator performance such as the final energy, transverse spot size evolution and total number of electrons accelerated through currently fabricated structures. Eventually, the simulation model will be applied to inform the phase mask profile to be added to a pulse front tilt drive laser pulse using a liquid crystal mask in the experimental setup being assembled at UCLA Pegasus Laboratory.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

In-beam 𝛾-ray spectroscopy toward the proton dripline: The curious case of 32 Ar

High-resolution in-beam 𝛾-ray spectroscopy was used to study excited states of the neutron-deficient nucleus 32 Ar populated in fast-beam induced four- and six-nucleon removal reactions from 36,38 Ca. One new 𝛾-ray transition and indications for an additional two were found, allowing for a glimpse at the level scheme beyond the 2$^{+}_{1}$ state. The nature of the new 1900⁢(4)-keV transition is discussed in the context of the known energy spectrum of the mirror nucleus 32 Si and shell-model calculations using the FSU and SDPF-M cross-shell effective interactions. Its resulting parent state at 3767⁢(5)⁢keV, more than 1.3 MeV above the proton separation energy, is tentatively assigned to have mixed 𝑠⁢𝑑-shell and 2p-2h character. It might either be the mirror of the 𝐽 𝜋 = 2$^{+}_{2}$ state of 32 Si at 4230.8⁢(8)⁢keV, but with a decay branch favoring a transition to the 2$^{+}_{2}$ over the ground state, or the mirror of the 4983.9⁢(11)-keV state with quantum numbers 0 + . Furthermore, the resulting mirror-energy differences of −473⁢(5) and −1218⁢(5)⁢keV are both sizable when compared to systematics; in the latter case the result would, in fact, be among the largest reported to date in the nuclear chart or suggest the potential existence of an additional, hitherto unidentified, low-lying 0 + state of 32 Si.

20 ≤ A ≤ 38↗
DOE OSTI2026

𝑙-forbidden 𝑀⁢1 strengths near 100 Sn from knockout reactions in Cd and Sn

Neutron knockout reactions on beams of 104,102 Cd and 104 Sn are presented. States in the residual 103,101 Cd and 103 Sn nuclei are populated, including low-lying 7/2 + states of 𝜈⁢𝑔 7/2 character. These states have half-lives ≈ 400 ps due to their low energy and hindered 𝐵⁡(𝑀⁢1;7/2 + →5/2 + ) strengths. The excited-state half-lives were measured using their Doppler-shifted line shapes, and the resulting 𝐵⁡(𝑀⁢1) strengths are compared to valence space in medium similarity renormalization group (VS-IMSRG) calculations. Lastly, the VS-IMSRG calculations underpredict the 𝑙-forbidden 𝑀⁢1 strengths in the 100 Sn region, as well as in other regions of the nuclear chart near 40 Ca and 208 Pb.

90 ≤ A ≤ 149↗
NASA NTRS1991

Modeling of the slewing control of a flexible structure

This paper presents a formulation for the modeling of a single-link flexible beam that is undergoing slewing motion at an actively controlled pinned end, where the other end of the beam is free. This pinned end, or slewing axis, is of fixed orientation such that the beam rotates in the horizontal plane. A geared dc electric motor is connected to the beam at the slewing axis. A position and a velocity sensor are placed at this hinged location, and their proportional feedback provides a position control system about the slewing axis. The motor characteristics, gear ratio, and the position feedback constant determine an equivalent rotational spring constant, often called the servo stiffness. This paper generalizes the structure's boundary conditions at the slewing axis to include the effects of the servo system. It is shown that the clamped-free beam assumption for the dynamics of the structure is a valid assumption if the ratio of the servo stiffness to beam flexibility is high. However, for moderate or low values of this ratio, the clamped-free beam leads to erroneous system models so that it becomes necessary to consider the effects of the driving servo on the dynamics of the flexible beam.

Garcia, Ephrahim↗
DOE OSTI2013

Investigation of the effect of low energy ion beam irradiation on mono-layer graphene

In this paper, the effect of low energy irradiation on mono-layer graphene was studied. Mono-layer graphene films were irradiated with B, N and F ions at different energy and fluence. X-ray photoelectron spectroscopy indicates that foreign ions implanted at ion energies below 35 eV could dope into the graphene lattice and form new chemical bonds with carbon atoms. The results of Raman measurement indicate that ion beam irradiation causes defects and disorder to the graphene crystal structure, and the level of defects increases with increasing of ion energy and fluence. Surface morphology images also prove that ion beam irradiation creates damages to graphene film. The experiment results suggest that low-energy irradiation with energies of about 30 eV and fluences up to 5·10{sup 14} cm{sup −2} could realize small amount of doping, while introducing weak damage to graphene. Low energy ion beam irradiation, provides a promising approach for controlled doping of graphene.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Femtosecond laser structuring of silver-containing glass: Silver redistribution, selective etching, and surface topology engineering

Femtosecond direct laser writing in silver-containing phosphate glasses allows for the three-dimensional (3D) implementation of complex photonic structures. Sample translation along or perpendicular to the direction of the beam propagation has been performed, which led to the permanent formation of fluorescent structures, either corresponding to a tubular shape or to two parallel planes at the vicinity of the interaction voxel, respectively. These optical features are related to significant modifications of the local material chemistry. Indeed, silver depletion areas with a diameter below 200 nm were evidenced at the center of the photo-produced structures while photo-produced luminescence properties are attributed to the formation of silver clusters around the multiphoton interaction voxel. The laser-triggered oxidation-reduction processes and the associated photo-induced silver redistribution are proposed to be at the origin of the observed original 3D luminescent structures. Thanks to such material structuring, surface engineering has been also demonstrated. Selective surface chemical etching of the glass has been obtained subsequently to laser writing at the location of the photo-produced structures, revealing features with nanometric depth profiles and radial dimensions strongly related to the spatial distributions of the silver clusters.

36 MATERIALS SCIENCE↗
NASA NTRS1975

An Experimental Study of the Nonlinear Stiffness of a Rotor Blade Undergoing Flap, Lag and Twist Deformations

This is an addendum to an experimental study of the large deformation of a cantilevered beam under a gravity tip load. It adds higher quality and new data on the static twist and bending deflections of the beam. The experimental data are compared with a recently developed nonlinear structural theory. Agreement is good for deflections that are small compared to the beam span and has systematic deviations for larger deflections.

Dowell, E. H.↗
NASA NTRS1979

Ion beam texturing of surfaces

Textured surfaces, typically with conical structures, have been produced previously by simultaneously etching a surface and seeding that surface with another material. A theory based on surface diffusion predicts a variation in cone spacing with surface temperature, as well as a critical temperature below which cones will not form. Substantial agreement with theory has been found for several combinations of seed and surface materials, including one with a high sputter yield seed on a low sputter yield surface (gold on aluminum). Coning with this last combination was predicted by the theory for a sufficiently mobile seed material. The existence of a minimum temperature for the formation of cones should also be important to those interested in ion-beam machining smooth surfaces. Elements contained in the environmental contaminants or in the sputtered alloys or compounds may serve as seed material.

Kaufman, H. R.↗
NASA NTRS1983

System identification of large flexible structures by using simple continuum models

Simple continuum models for the representation of large truss beams and truss platforms are constructed and employed in the solution of system identification problems permitting the significant reduction of the number of structural parameters. Two simple and easily computer-implemented algorithms are presented for the estimation of a simple model's equivalent structural parameters, and analytical and numerical solutions are given for the truss beam and truss platform cases in order to illustrate the basic concepts. It is found that model simplicity, in conjunction with the principle of least square erors, yields a feasible integration of structural and identification problems.

Juang, J. N.↗
DOE OSTI2013

Terahertz free electron superradiation from mimicking surface plasmons-two electron beams interaction within a 3-mirror quasi-optical cavity

Interaction between mimicking surface plasmons and electron beams provides a good opportunity to develop terahertz (THz) radiation sources. In this paper, such an interaction in a special 3-mirror quasi-optical cavity is presented and explored. The 3-mirror quasi-optical cavity acts as a resonant tunable system, the resonance frequency of which can be tuned by adjusting the distance between mirrors. The study demonstrated THz free electron superradiation from the interaction of mimicking surface plasmons and two electron beams that formed a resonance within the structure, with the 3-mirror cavity enhancing the intensity of superradiation. Moreover, this system can work in the high-harmonic superradiation region with relatively high efficiency and low current density. This concept thus shows the application potential for electron-beam-driven terahertz sources.

43 PARTICLE ACCELERATORS↗
NASA NTRS2008

Deflection-Compensating Beam for use inside a Cylinder

A design concept for a beam for a specific application permits variations and options for satisfying competing requirements to minimize certain deflections under load and to minimize the weight of the beam. In the specific application, the beam is required to serve as a motion-controlled structure for supporting a mirror for optical testing in the lower third portion of a horizontal, cylindrical vacuum chamber. The cylindrical shape of the chamber is fortuitous in that it can be (and is) utilized as an essential element of the deflection-minimizing design concept. The beam is, more precisely, a table-like structure comprising a nominally flat, horizontal portion with vertical legs at its ends. The weights of the beam and whatever components it supports are reacted by the contact forces between the lower ends of the legs and the inner cylindrical chamber wall. Whereas the bending moments arising from the weights contribute to a beam deflection that is concave with its lowest point at midlength, the bending moments generated by the contact forces acting on the legs contribute to a beam deflection that is convex with its highest point at midlength. In addition, the bending of the legs in response to the weights causes the lower ends of the legs to slide downward on the cylindrical wall. By taking the standard beam-deflection equations, combining them with the geometric relationships among the legs and the horizontal portion of the beam, and treating the sliding as a component of deflection, it is possible to write an equation for the net vertical deflection as a function of the load and of position along the beam. A summary of major conclusions drawn from the equation characterization is included.

Goodman, Dwight↗
NASA NTRS1989

Optical inspection of space-propulsion components using an injection seeded Nd:YAG laser system

A dual-beam, injection-seeded, Nd:YAG laser has been demonstrated for detecting structural defects. This demonstration was part of an on-going project to use dual-reference-beam holographic interferometry to inspect space propulsion components for cracks, structural failures, structural changes, and gas leaks. Potential subjects for inspection include welds, duct work, casings, turbopumps, blades, composites, and ceramics. The maximum dimension of an inspected area ranges from a few centimeters to a meter. The entire optical inspection system is now ready for a demonstration application.

Decker, Arthur J.↗
DOE OSTI2025

Probing hard/soft factorization via beam-spin asymmetry in exclusive pion electroproduction from the proton

Deep exclusive meson production (DEMP) reactions, such as $p(\vec{e}, e' π^+)n$, provide opportunities to study the three-dimensional structure of the nucleon through differential cross section and beam- and target-spin asymmetry measurements. This work aims to probe the onset of the hard/soft factorization regime through the exclusive $p(\vec{e}, e' π^+)n$ reaction, as measured in the KaonLT experiment at Jefferson Lab Hall C. A 10.6 GeV longitudinally polarized electron beam was incident on an unpolarized liquid hydrogen target, and the scattered electron and produced meson were detected in two magnetic focusing spectrometers, enabling precision cross section measurements. The cross section ratio $σ_{LT'}/σ_0$ was extracted from the beam-spin asymmetry $A_{LU}$. The t -dependence of $σ_{LT'}/σ_0$ was determined at fixed $Q^2$ and $x_B$ over a range of kinematics from 2 < $Q^2$ < 6 GeV$^2$ above the resonance region ($W$ > 2 GeV). Furthermore, these data are combined with recent results from CLAS/CLAS12 to determine the $Q^2$-dependence of at two $(x_B, t)$ settings. This was fairly flat, with $Q^2$ not having a measurable effect on the value of in the range explored. Results are compared to predictions from the generalized parton distribution (GPD) formalism, which relies explicitly on hard/soft factorization, and Regge formalism. The Regge models better predict $σ_{LT'}/σ_0$, which suggests that the factorization regime is not yet reached.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2013

Multi-Step Ka/Ka Dichroic Plate with Rounded Corners for NASA's 34m Beam Waveguide Antenna

A multi-step Ka/Ka dichroic plate Frequency Selective Surface (FSS structure) is designed, manufactured and tested for use in NASA's Deep Space Network (DSN) 34m Beam Waveguide (BWG) antennas. The proposed design allows ease of manufacturing and ability to handle the increased transmit power (reflected off the FSS) of the DSN BWG antennas from 20kW to 100 kW. The dichroic is designed using HFSS and results agree well with measured data considering the manufacturing tolerances that could be achieved on the dichroic.

antenna↗