Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spatial data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Surface temperatures in the polar regions from Nimbus 7 temperature humidity infrared radiometer

Monthly surface temperatures in the Arctic and Antarctic regions have been derived from the 11.5 micrometer thermal infrared channel of the Nimbus 7 temperature humidity infrared radiometer (THIR) for a whole year in 1979 and for a winter and a summer month from 1980 through 1985. The data set shows interannual variability and provides spatial details that allow identification of temperature patterns over sea ice and ice sheet surfaces. For example, the coldest spot in the southern hemisphere is observed to be consistently in the Antarctic plateau in the southern hemisphere, while that in the northern hemisphere is usually located in Greenland, or one of three other general areas: Siberia, the central Arctic, or the Canadian Archipelago. Also, in the southern hemisphere, the amplitude of the seasonal fluctuation of ice sheet temperatures is about 3 times that of sea ice, while in the northern hemisphere, the corresponding fluctuations for the two surfaces are about the same. The main sources of error in the retrieval are cloud and other atmospheric effects. These were minimized by first choosing the highest radiance value from the set of measurements during the day taken within a 30 km by 30 km grid of each daily map. Then the difference of daily maps was taken and where the difference is greater than a certain threshold (which in this case is 12 C), the data element is deleted. Overall, the monthly maps derived from the resulting daily maps are spatially and temporally consistent, are coherent with the topograph y of the Antarctic continent and the location of the sea ice edge, and are in qualitative agreement with climatological data. Quantitatively, THIR data are in good agreement with Antarctic ice sheet surface air temperature station data with a correlation coefficient of 0.997 and a standard deviation of 2.0 C. The absolute values are not as good over the sea ice edges, but a comparison with Russian 2-m drift station temperatures shows very high correlation (with correlation coefficient at 0.998) and a standard deviation of 1.1 C. Overall, the rms error is estimated to be from 1 to 2 C, depending on the surface, while the average bias when compared with in situ data is less than 2 C.

Comiso, Josefino C.↗

Observation of pressure ridges in SAR images of sea ice: Scattering theory and comparison with observations

Ridges and keels (hummocks and bummocks) in sea ice flows are important in sea ice research for both scientific and practical reasons. Sea ice movement and deformation is driven by internal and external stresses on the ice. Ridges and keels play important roles in both cases because they determine the external wind and current stresses via drag coefficients. For example, the drag coefficient over sea ice can vary by a factor of several depending on the fluid mechanical roughness length of the surface. This roughness length is thought to be strongly dependent on the ridge structures present. Thus, variations in ridge and keel structure can cause gradients in external stresses which must be balanced by internal stresses and possibly fracture of the ice. Ridging in sea ice is also a sign of fracture. In a practical sense, large ridges form the biggest impediment to surface travel over the ice or penetration through sea ice by ice-strengthened ships. Ridges also play an important role in the damage caused by sea ice to off-shore structures. Hence, observation and measurement of sea ice ridges is an important component of sea ice remote sensing. The research reported here builds on previous work, estimating the characteristics of ridges and leads in sea ice from SAR images. Our objective is to develop methods for quantitative measurement of sea ice ridges from SAR images. To make further progress, in particular, to estimate ridge height, a scattering model for ridges is needed. Our research approach for a ridge scattering model begins with a survey of the geometrical properties of ridges and a comparison with the characteristics of the surrounding ice. For this purpose we have used airborne optical laser (AOL) data collected during the 1987 Greenland Sea Experiment. These data were used to generate a spatial wavenumber spectrum for height variance for a typical ridge - the typical ridge is the average over 10 large ridges. Our first-order model radar scattering includes both the quasi-specular and Bragg resonant scatter mechanisms. This model is extended to include contributions from volume scatter and scatter from discrete objects. Geometrical characteristics from the AOL survey and model calculations imply that for radar wavelengths and observation geometries that are dominated by the quasi-specular scattering mechanism radar backscatter from a ridge is a measure of peak ridge height. We present scattering model results and compare them with ridges observed during the LEADEX experiment of March-April 1992 when both X, C, and L-band aircraft SAR and the ERS-1 satellite SAR observed a region in the Beaufort Sea near 86 deg N, 10 deg W. Data were also collected documenting ridge characteristics on the surface. The surface data are used to generate a SAR signature via the scattering model described above. The predicted SAR signatures compare well with the SAR observations.

Vesecky, J. F.↗

Comparison of existing digital image analysis systems for the analysis of Thematic Mapper data

Most existing image analysis systems were designed with the Landsat Multi-Spectral Scanner in mind, leaving open the question of whether or not these systems could adequately process Thematic Mapper data. In this report, both hardware and software systems have been evaluated for compatibility with TM data. Lack of spectral analysis capability was not found to be a problem, though techniques for spatial filtering and texture varied. Computer processing speed and data storage of currently existing mini-computer based systems may be less than adequate. Upgrading to more powerful hardware may be required for many TM applications.

Likens, W. C.↗

Electron beam dispersion measurements in nitrogen using two-dimensional imaging of N2(+) fluorescence

Experimental results are presented related to the radial spread of fluorescence excited by 10 and 20 KeV electron beams passing through nonflowing rarefied nitrogen at 293 K. An imaging technique for obtaining species distributions from measured beam-excited fluorescence is described, based on a signal inversion scheme mathematically equivalent to the inversion of the Abel integral equation. From fluorescence image data, measurements of beam radius, integrated signal intensity, and spatially resolved distributions of N2(+) first-negative-band fluorescence-emitting species have been made. Data are compared with earlier measurements and with an heuristic beam spread model.

Clapp, L. H.↗

Sensitivity of Lower Stratospheric Assimilated Ozone on Error Covariance Modeling and Data Selection

Assimilated ozone is produced at the NASA/Goddard Data Assimilation Office by blending ozone retrieved from the Solar Backscatter UltraViolet/2 (SBUV/2) instrument and the Earth Probe Total Ozone Mapping Spectrometer (EP TOMS) measurements into an off-line transport model. The current system tends to overestimate the amount of lower stratospheric ozone. This is a region where ozone plays a key role in the forcing of climate. A biased ozone field in this region will adversely impact calculations of the stratosphere-troposphere exchange and, when used as a first guess in retrievals, the values determined from satellite observations. Since these are all important applications of assimilated ozone products, effort is being directed towards reducing this bias. The SBUV ozone data have a coarse vertical resolution with increased uncertainty below the ozone maximum, and TOMS provides only total ozone columns. Thus, the assimilated ozone in the lower stratosphere, and its vertical distribution in particular, are only weakly constrained by the incoming SBUV and TOMS data. Consequently, the assimilated ozone distribution should be sensitive to changes in inputs to the statistical analysis scheme. Accordingly, the sensitivity of the assimilated lower stratospheric ozone fields to changes in the TOMS error-covariance modeling and the SBUV data selection has been investigated. The use of a spatially correlated TOMS error covariance model led to improvements in the product. However, withholding the SBUV/2 data for the layer between 63 and 126 hPa typically degraded the product, a result which vindicates the use of this layer ozone product, despite its known errors. These efforts to improve the lower stratospheric distribution will be extended to include a more advanced forecast error covariance model, and by assimilating ozone products from new instruments on Envisat and EOS Aura.

Stajner, Ivanka↗

The Hyperspectral Infrared Imager (HyspIRI) Public Health and Air Quality Applications

The neglected tropical diseases (NTDs), a group of chronic, debilitating, and poverty-promoting parasitic, bacterial, and some viral and fungal infections, are among the most common causes of illness of the poorest people living in developing countries. Abiotic environmental factors are important in determining the distribution of disease-causing vectors and their life-cycles. HyspIRI observations can be merged through a Land Data Assimilation System (LDAS) be used to drive spatially-explicit ecological models of NTD vectors distribution & life cycles. Assimilations will be driven by observational data LDAS and satellite-derived meteorological forcing data, parameter datasets, and assimilation observations. HyspIRI hyperspectral measurements would provide global measurements of surface mineralogy and biotic crusts important in accessing the impact of dust in human health. HyspIRI surface thermal measurements would also help identify the variability of dust sources due to surface moisture conditions and map mineralogy.

Luvall, Jeffrey C.↗

The Hyperspectral Infrared Imager (HyspIRI) Public Health and Air Quality Applications

The neglected tropical diseases (NTDs), a group of chronic, debilitating, and poverty-promoting parasitic, bacterial, and some viral and fungal infections, are among the most common causes of illness of the poorest people living in developing countries. Abiotic environmental factors are important in determining the distribution of disease-causing vectors and their life-cycles. HyspIRI observations can be merged through a Land Data Assimilation System (LDAS) be used to drive spatially-explicit ecological models of NTD vectors distribution & life cycles. Assimilations will be driven by observational data LDAS and satellite-derived meteorological forcing data, parameter datasets, and assimilation observations. HyspIRI hyperspectral measurements would provide global measurements of surface mineralogy and biotic crusts important in accessing the impact of dust in human health. HyspIRI surface thermal measurements would also help identify the variability of dust sources due to surface moisture conditions and map mineralogy.

Luvall, Jeffrey C.↗

The Hyperspectral Infrared Imager (HyspIRI) Public Health & Air Quality Applications

The neglected tropical diseases (NTDs), a group of chronic, debilitating, and poverty-promoting parasitic, bacterial, and some viral and fungal infections, are among the most common causes of illness of the poorest people living in developing countries. Abiotic environmental factors are important in determining the distribution of disease-causing vectors and their life-cycles. HyspIRI observations can be merged through a Land Data Assimilation System (LDAS) be used to drive spatially-explicit ecological models of NTD vectors distribution & life cycles. Assimilations will be driven by observational data LDAS and satellite-derived meteorological forcing data, parameter datasets, and assimilation observations. HyspIRI hyperspectral measurements would provide global measurements of surface mineralogy and biotic crusts important in accessing the impact of dust in human health. HyspIRI surface thermal measurements would also help identify the variability of dust sources due to surface moisture conditions and map mineralogy.

Luvall, Jeffrey C.↗

Interpretations of the EOLE experiment. II - Spatial variation of transient and stationary modes

An upper tropospheric and hemispheric scale data set, resulting from the EOLE constant density balloon experiment (conducted between August 1971 and July 1972) is used to study the spatial variation of various measured and derived fields. The quality and density of the data set is shown to be sufficient for such a study during the Southern Hemisphere spring, summer and autumn of the data period but inadequate during winter. The stationary modes of the Southern Hemisphere are shown to be relatively weak compared to their Northern Hemisphere counterparts and possess distinct seasonal phase shifts. The transient fields, on the other hand, show definite longitudinal anomalies in their seasonal mean properties with magnitudes up to thrice the zonal average. The transient fields show little seasonal variability in position. Furthermore, it appears that most of their magnitude results from the contribution of a relatively few but extremely intense disturbances which appear to possess a fairly regular variability in the 18-23 day range.

Webster, P. J.↗

First Assessments of ICESat-2 Performance Using Aircraft Data

The Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) Is a next-generation laser altimeter designed to continue key observations of ice sheet elevation change, sea ice freeboard, vegetation canopy height, earth surface elevation, and sea surface height. Scheduled for launch in early 2016, ICESat-2 will use a high repetition rate (approximately 10 kHz), small footprint (10m diameter) laser, and a single-photon-sensitive detection strategy (photon counting) to measure precise ranges to the earth's surface. Operating in the green (approximately 532nm), the six beams of ICESat-2 will provide improved spatial coverage compared with ICESat while the differences in transmit energy among the beams provide a large dynamic range. In order to evaluate models of predicted ICESat-2 performance, and provide ICESat-2-like data for algorithm development an airborne ICESat-2 simulator was developed and first flown in 2010, this simulator, the Multiple Altimeter Beam Experimental Lidar (MABEL) has now had three deployments in the western US, and will be deployed to the polar regions in spring of 2012. MABEL uses a similar measurement strategy to what will be used on ICESat-2. MABEL collects more spatially-dense data than ICESat-2 (approximately 2-cm along track) with a smaller 2m diameter footprint in 16 green channels and an additional 8 channels in the infrared. The comparison between frequencies allows for analysis of possible penetration of green energy into water or snow. We present MABEL data collected over deserts, forests, ocean water, lakes. snow covered mountains, and saft flats, provide examples of how these data are being used to develop algorithms that derive geophysical products from ICESat 2 and assess expected performances.

Neumann, Tom↗

Spatial and Alignment Analyses for a field of Small Volcanic Vents South of Pavonis Mons Mars

The Tharsis province of Mars displays a variety of small volcanic vent (10s krn in diameter) morphologies. These features were identified in Mariner and Viking images [1-4], and Mars Orbiter Laser Altimeter (MOLA) data show them to be more abundant than originally observed [5,6]. Recent studies are classifying their diverse morphologies [7-9]. Building on this work, we are mapping the location of small volcanic vents (small-vents) in the Tharsis province using MOLA, Thermal Emission Imaging System, and High Resolution Stereo Camera data [10]. Here we report on a preliminary study of the spatial and alignment relationships between small-vents south of Pavonis Mons, as determined by nearest neighbor and two-point azimuth statistical analyses. Terrestrial monogenetic volcanic fields display four fundamental characteristics: 1) recurrence rates of eruptions,2 ) vent abundance, 3) vent distribution, and 4) tectonic relationships [11]. While understanding recurrence rates typically requires field measurements, insight into vent abundance, distribution, and tectonic relationships can be established by mapping of remotely sensed data, and subsequent application of spatial statistical studies [11,12], the goal of which is to link the distribution of vents to causal processes.

Bleacher, J. E.↗

Estimating Spatially-distributed Surface Fluxes in a Semi-arid Great Basin Desert Using Landsat TM Thermal Data

The research described in this chapter demonstrates a method for using Landsat Thematic Mapper data to estimate instantaneous regional-scale energy fluxes over an arid valley in eastern Nevada, U.S.A. Here point-based models of surface energy and water balance fluxes were applied to individual pixels of a Landsat Thematic Mapper scene over the study area. Although the method used to estimate these instantaneous fluxes requires certain assumptions be made about the spatial distribution of several physical parameters, the results from this analysis and modeling suggest that it is possible to scale from point measurements of environmental state variables (i.e., net radiation flux, surface heat flux, sensible heat flux, and latent heat flux) to regional estimates of energy exchange to obtain an understanding of the spatial relationship between these fluxes and landscape variables.

Quattrochi, Dale A.↗

Temporal and spatial variability of aerosol optical depth in the Sahel region in relation to vegetation remote sensing

In order to monitor the aerosol characteristics needed for atmospheric correction of remotely sensed data, a network of sun photometers was established in the Sahel region of Senegal, Mali, and Niger. Data analysis suggests that there is a high spatial variability of the aerosol optical thickness tau(a) in the western Sahel region. At a 67 percent confidence level the instantaneous values of tau(a) can be extrapolated approximately 270-400 km with an error tolerance of 50 percent. Spatial variability in the dry season is found to be of a similar magnitude. The ranges of variations in the NDVI in the Sahel region are shown to be approximately 0.02 and 0.01, respectively, due to commonly observed fluctuations in the aerosol optical thickness and aerosol size distribution.

Holben, B. N.↗

Statistical characteristics of bursty bulk flow events

Using a common methodology to analyze data from the Active Magnetospheric Particle Tracer Explorer/Ion Release Module (AMPTE/IRM) and International Sun-Earth Explorer 2 (ISEE 2) satellites we report on the statistical properties of bursty bulk flow events (BBFs) in the inner plasma sheet (IPS). A positive correlation between BBFs and the AE index suggests that BBFs are predominantly geomagnetically active time phenomena. Earthward BBFs are more frequent close to midnight and away from Earth, up to a distance of approximately 19 R(sub E). Tailward BBFs are very infrequent in the IRM data set and somewhat less infrequent in the ISEE 2 data set in the region of the satellites' spatial overlap, possibly due to the more active conditions prevailing during the ISEE 2 mission in that region. However, in both data sets the ratio of tailward to earthward BBFs increases with distance from Earth; more than 20% of all BBFs are anti-sunward tailward of X = -19 R(sub E) in the ISEE 2 data set. BBFs are responsible for 60-100% of the measured earthward transport of mass, energy and magnetic flux past the satellite in the regions of maximum occurrence rate, even though they last approximately 10-15% of the IPS observation time there. Thus BBFs represent the primary transport mechanism at those regions. The one-to-one correspondence between BBFs and substorm phase, as well as the relative contribution of BBFs to the total transport observed during substorms are questions that await further investigation based on multi instrument studies of individual events.

Angelopoulos, V.↗

Three-dimensional Model of Tissue and Heavy Ions Effects

A three-dimensional tissue model was incorporated into a new Monte Carlo algorithm that simulates passage of heavy ions in a tissue box . The tissue box was given as a realistic model of tissue based on confocal microscopy images. The action of heavy ions on the cellular matrix for 2- or 3-dimensional cases was simulated. Cells were modeled as a cell culture monolayer in one example, where the data were taken directly from microscopy (2-d cell matrix), and as a multi-layer obtained from confocal microscopy (3-d case). Image segmentation was used to identify cells with precise areas/volumes in an irradiated cell culture monolayer, and slices of tissue with many cell layers. The cells were then inserted into the model box of the simulated physical space pixel by pixel. In the case of modeled tissues (3-d), the tissue box had periodic boundary conditions imposed, which extrapolates the technique to macroscopic volumes of tissue. For the real tissue (3-d), specific spatial patterns for cell apoptosis and necrosis are expected. The cell patterns were modeled based on action cross sections for apoptosis and necrosis estimated from current experimental data. A spatial correlation function indicating a higher spatial concentration of damaged cells from heavy ions relative to the low-LET radiation cell damage pattern is presented. The spatial correlation effects among necrotic cells can help studying microlesions in organs, and probable effects of directionality of heavy ion radiation on epithelium and endothelium.

Ponomarev, Artem L.↗

Forest Classification and Inventory System using Landsat, digital terrain, and ground sample data

Accurate timber inventory data for cost-effective forest management is the primary goal of a Forest Classification and Inventory System (FOCIS) designed to provide estimates of timber volume by species aggregated by compartments, townships, or other spatial management units. FOCIS uses Landsat spectral data, including a synthesized texture channel, and Forest Service ground sample data to produce timber volume-homogeneous classes through a two-step unsupervised clustering process. Registered digital terrain data, including derived slope angle and slope aspect channels, are used to predict species proportions through a trend surface model, again using ground sample data for model calibration. In the final stage of FOCIS, volume estimates and predicted species proportions are merged and aggregated to yield timber volumes by species within management areas.

Strahler, A. H.↗

Seismic Imager Space Telescope

A concept has been developed for a geostationary seismic imager (GSI), a space telescope in geostationary orbit above the Pacific coast of the Americas that would provide movies of many large earthquakes occurring in the area from Southern Chile to Southern Alaska. The GSI movies would cover a field of view as long as 300 km, at a spatial resolution of 3 to 15 m and a temporal resolution of 1 to 2 Hz, which is sufficient for accurate measurement of surface displacements and photometric changes induced by seismic waves. Computer processing of the movie images would exploit these dynamic changes to accurately measure the rapidly evolving surface waves and surface ruptures as they happen. These measurements would provide key information to advance the understanding of the mechanisms governing earthquake ruptures, and the propagation and arrest of damaging seismic waves. GSI operational strategy is to react to earthquakes detected by ground seismometers, slewing the satellite to point at the epicenters of earthquakes above a certain magnitude. Some of these earthquakes will be foreshocks of larger earthquakes; these will be observed, as the spacecraft would have been pointed in the right direction. This strategy was tested against the historical record for the Pacific coast of the Americas, from 1973 until the present. Based on the seismicity recorded during this time period, a GSI mission with a lifetime of 10 years could have been in position to observe at least 13 (22 on average) earthquakes of magnitude larger than 6, and at least one (2 on average) earthquake of magnitude larger than 7. A GSI would provide data unprecedented in its extent and temporal and spatial resolution. It would provide this data for some of the world's most seismically active regions, and do so better and at a lower cost than could be done with ground-based instrumentation. A GSI would revolutionize the understanding of earthquake dynamics, perhaps leading ultimately to effective warning capabilities, to improved management of earthquake risk, and to improved public safety policies. The position of the spacecraft, its high optical quality, large field of view, and large field of regard will make it an ideal platform for other scientific studies. The same data could be simply reused for other studies. If different data, such as multi-spectral data, is required, additional instruments could share the telescope.

Sidick, Erkin↗

Application of LANDSAT data to the study of urban development in Brasilia

The urban growth of Brasilia within the last ten years is analyzed with special emphasis on the utilization of remote sensing orbital data and automatic image processing. The urban spatial structure and the monitoring of its temporal changes were examined in a whole and dynamic way by the utilization of MSS-LANDSAT images for June (1973, 1978 and 1983). In order to aid data interpretation, a registration algorithm implemented in the Interactive Multispectral Image Analysis System (IMAGE-100) was utilized aiming at the overlap of multitemporal images. The utilization of suitable digital filters, combined with the images overlap, allowed a rapid identification of areas of possible urban growth and oriented the field work. The results obtained in this work permitted an evaluation of the urban growth of Brasilia, taking as reference the proposal stated for the construction of the city in the Pilot Plan elaborated by Lucio Costa.

Parada, N. D. J.↗