Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation and experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

An Intercomparison and Evaluation of Aircraft-Derived and Simulated CO from Seven Chemical Transport Models During the TRACE-P Experiment

Four global scale and three regional scale chemical transport models are intercompared and evaluated during NASA's TRACE-P experiment. Model simulated and measured CO are statistically analyzed along aircraft flight tracks. Results for the combination of eleven flights show an overall negative bias in simulated CO. Biases are most pronounced during large CO events. Statistical agreements vary greatly among the individual flights. Those flights with the greatest range of CO values tend to be the worst simulated. However, for each given flight, the models generally provide similar relative results. The models exhibit difficulties simulating intense CO plumes. CO error is found to be greatest in the lower troposphere. Convective mass flux is shown to be very important, particularly near emissions source regions. Occasionally meteorological lift associated with excessive model-calculated mass fluxes leads to an overestimation of mid- and upper- tropospheric mixing ratios. Planetary Boundary Layer (PBL) depth is found to play an important role in simulating intense CO plumes. PBL depth is shown to cap plumes, confining heavy pollution to the very lowest levels.

Kiley, C. M.↗

Experimental space weathering of regolith material

Significant advances in the understanding of space weathering processes were recently reported. Submicroscopic iron blebs were produced in lunar simulant glass and natural terrestrial minerals by high-temperature reduction in controlled atmosphere furnaces. These experiments altered the samples' optical properties and microtextures so that they resembled those of extremely mature lunar soil. The results contributed to a revised model for natural reduction in the regolith. Subsequently, supporting results were obtained by reduction of lunar samples. Research to date has focused on reduction of three lunar surface components: basalt, pyroclastic glass, and mare soil. An extensive set of H reduction experiments with simulants has led to a detailed understanding of reaction mechanisms and kinetics. Reduction experiments using lunar basalt were recently conducted by Carbotek. Reduced samples from these test were analyzed. Reduction experiments on lunar glass 74220 were run at temperatures of 900-1100 C. Reduction efficiency of volcanic glass proved to be a function of the sample's FeO abundance and reaction temperature. We also reduced mare soil 75061 at temperatures of 900-1050 C. Partial reduction of FeO in olivine and pyroxene occurred, but was slower and less complete than reduction of ilmenite. Our experiments on simulants and lunar samples have indicated that the most readily reduced phases in the regolith are ilmenite and glass. Based on initial tests with simulants we proposed refinements to the accepted model for space weathering of the regolith. The impact of a micrometeoroid flash heats and melts and ejects from the impact point a small volume of soil that contains trapped solar wind H and C. Reduction occurs rapidly, while the melt volume is still in motion. When a droplet encounters unmelted soil, it envelopes cold mineral grains. The melt is chilled rapidly. Our analyses of experimentally reduced lunar basalt, glass, and mare soil support the proposed model for space weathering.

Mckay, D. S.↗

Lagrangian 3D CFD Simulation of Turbulent Aerosol Experiments

As a continuation of Year 2 of the Department of Energy's Nuclear Safety Research and Development (NSRD) project, high-fidelity computational tools developed at Sandia National Laboratories (SNL) were used to substantiate airborne release fraction and respirable fraction data in DOE-HDBK-3010. For this research, SNL's incompressible Fuego computational fluid dynamics (CFD) code was coupled onto thousands of Lagrangian aerosol particles that were individually tracked. Although Fuego does not currently have a particle interaction model (e.g., agglomeration), aerosol resuspension was implemented this year as a part of this project. The model improvement from exploratory simulations, as described in the previous year, will be discussed in this paper, along with other simulations for other aerosol experiments that use the resuspension model. In addition, key experiment turbulence parameters will be calculated, and various turbulence models will be examined for applicability towards complex geometries and dispersal conditions. (authors)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

R&D Adoption and Progress in Full Simulation of the CMS experiment

In this work we report on evolution of usage of Geant4 within CMSSW and adaptation of the newest Geant4 11.2.1, which is expected to be used for CMS simulation production in 2025. Physics validation results and results on CPU performance are reported. For the Phase-2 simulation several R&D are carried out. A significant update for CMS geometry description is performed. Different aspects of geometry description and physics simulation for the new detectors will be discussed. Progress on R&D efforts for the Phase-2 simulation will be presented, which includes reports on experience of application of G4HepEm external library.

Srimanobhas, Norraphat [Chulalongkorn U.]↗

Comparison between simulated and observed LHC beam backgrounds in the ATLAS experiment at E beam =4 TeV

Results of dedicated Monte Carlo simulations of beam-induced background (BIB) in the ATLAS experiment at the Large Hadron Collider (LHC) are presented and compared with data recorded in 2012. During normal physics operation this background arises mainly from scattering of the 4 TeV protons on residual gas in the beam pipe. Methods of reconstructing the BIB signals in the ATLAS detector, developed and implemented in the simulation chain based on the \textsc{Fluka} Monte Carlo simulation package, are described. The interaction rates are determined from the residual gas pressure distribution in the LHC ring in order to set an absolute scale on the predicted rates of BIB so that they can be compared quantitatively with data. Through these comparisons the origins of the BIB leading to different observables in the ATLAS detectors are analysed. The level of agreement between simulation results and BIB measurements by ATLAS in 2012 demonstrates that a good understanding of the origin of BIB has been reached.

47 OTHER INSTRUMENTATION↗

Laboratory simulations of the Viking Labeled Release experiment - Kinetics following second nutrient injection and the nature of the gaseous end product

Injection of (C-14)-labeled nutrient onto Mars soil produced an evolution of C-14 gas in the Viking Labeled Release (LR) experiment. However, a second injection of nutrient seven days later was followed by an abrupt diminution of the amount of radioactive gas in the test cell. Simulation experiments performed in the LR Test Standards Module (TSM) have yielded a plausible explanation for this diminution. Radioactive carbon gases were injected into the TSM test cell in the presence and absence of two Mars analog soils. After equilibration, water was injected and its effect observed. The results indicate that the flight data following second nutrient injection can be explained on a physico-chemical basis involving a carbon dioxide/water/soil equilibrium in the test cell. The results also suggest that the gaseous end product of the Labeled Release reaction on Mars is more likely carbon dioxide than carbon monoxide.

Levin, G. V.↗

Automation and optimization of stopping and range of ions in matter simulation runtime

Prior to every ion implantation experiment a simulation of the ion range and other relevant parameters is performed using Monte-Carlo based codes. Although increasing computing power has improved the speed of these calculations, the demands on Monte-Carlo codes are also increasing, requiring evaluation of the optimal number of simulations while ensuring accuracy within threshold bounds. We evaluate the “Stopping and Range of Ions in Matter” (SRIM) code due to its widespread usage. We show how dividing simulations into multiple parallel simulations with different random seeds can lead to calculation speedup and find lower bounds for the required number of ion traces simulated based on an exemplar system of a Ga focused ion beam and a high energy C beam as used in high linear energy transfer testing. Here our results indicate simulations can yield results within the underlying data accuracy of SRIM at 10X and 100X shorter simulation time than the SRIM default values.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Differentiating the role of lithium and oxygen in retaining deuterium on lithiated graphite plasma-facing components

Laboratory experiments have been used to investigate the fundamental interactions responsible for deuterium retention in lithiated graphite. Oxygen was found to be present and play a key role in experiments that simulated NSTX lithium conditioning, where the atomic surface concentration can increase to >40% when deuterium retention chemistry is observed. Quantum-classical molecular dynamic simulations elucidated this oxygen-deuterium effect and showed that oxygen retains significantly more deuterium than lithium in a simulated matrix with 20% lithium, 20% oxygen, and 60% carbon. Simulations further show that deuterium retention is even higher when lithium is removed from the matrix. Experiments artificially increased the oxygen content in graphite to ∼16% and then bombarded with deuterium. X-ray photoelectron spectroscopy showed depletion of the oxygen and no enhanced deuterium retention, thus demonstrating that lithium is essential in retaining the oxygen that thereby retains deuterium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Phase-field simulations of GaN growth by selective area epitaxy from complex mask geometries

Three-dimensional phase-field simulations of GaN growth by selective area epitaxy were performed. The model includes a crystallographic-orientation-dependent deposition rate and arbitrarily complex mask geometries. The orientation-dependent deposition rate can be determined from experimental measurements of the relative growth rates of low-index crystallographic facets. Growth on various complex mask geometries was simulated on both c-plane and a-plane template layers. Agreement was observed between simulations and experiment, including complex phenomena occurring at the intersections between facets. The sources of the discrepancies between simulated and experimental morphologies were also investigated. The model provides a route to optimize masks and processing conditions during materials synthesis for solar cells, light-emitting diodes, and other electronic and opto-electronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PINS Measurements and Simulations for Stand-Off Detection of High Explosives

There has been some interest in the ability of Idaho National Laboratory's (INL) Portable Isotopic Neutron Spectroscopy System's (PINS) ability to detect high explosives at a distance. In order to assess the system's ability to perform this task, laboratory experiments on simulated or mock explosives and Monte Carlo simulations using MCNP on both mock and real explosives have been performed. The simulations and experiments on mock explosives have essentially identical configurations, allowing the models to be confirmed with experiment. This provides greater confidence in the simulations on real explosives without the need for experiment on live explosives.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Coalescing at 8 GeV in the Fermilab Main Injector

For Project X, it is planned to inject a beam of 3 10{sup 11} particles per bunch into the Main Injector. To prepare for this by studying the effects of higher intensity bunches in the Main Injector it is necessary to perform coalescing at 8 GeV. The results of a series of experiments and simulations of 8 GeV coalescing are presented. To increase the coalescing efficiency adiabatic reduction of the 53 MHz RF is required. This results in {approx}70% coalescing efficiency of 5 initial bunches. Data using wall current monitors has been taken to compare previous work and new simulations for 53 MHz RF reduction, bunch rotations and coalescing, good agreement between experiment and simulation was found. By increasing the number of bunches to 7 and compressing the bunch energy spread a scheme generating approximately 3 10{sup 11} particles in a bunch has been achieved. These bunches will then be used in further investigations.

43 PARTICLE ACCELERATORS↗

Impact of Hydrogen Bonding on the Dynamics and Structure of Protic Ionic Liquid/Water Binary Mixtures

In this work, the orientational dynamics and microscopic liquid structure of a protic ionic liquid, 1- ethylimidazolium bis(trifluoromethylsulfonyl)imide (EhimNTf 2 ), and its aprotic analogue, 1- ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EmimNTf 2 ), were studied at various water concentrations using optical heterodyne-detected optical Kerr Effect (OHD-OKE) spectroscopy, linear infrared spectroscopy, and atomistic simulations. The OHD-OKE experiments essentially measure the orientational relaxation of the Ehim + and Emim + cations. The experiments and simulations show a significant dynamical and structural change in EhimNTf 2 between the 2:1 ion pair:water and the 1:1 ion pair:water concentrations. The OHDOKE data show that EmimNTf 2 /water mixtures exhibit hydrodynamic behavior at all water concentrations up to saturation. In contrast, EhimNTf 2 /water mixtures deviate from hydrodynamic dynamic behavior at water concentrations above 2:1. At the 1:1 concentration, the orientational randomization of the Ehim + cation is slower than that predicted using viscosity data. Atomistic simulation results reveal the microscopic ionic structures of dry liquids and the preferential hydrogen bonding of water to the H atom of the N-H of Ehim + over other sites on the Ehim + and Emim + cations. Atomistic simulation results demonstrate that in EhimNTf 2 RTIL/water mixtures there is a substantial jump in the formation of water-water hydrogen bonds in addition to N-H-water hydrogen bonds upon increasing the water concentration from 2:1 to 1:1. Water-water hydrogen bonding strengthens the spatial coordination of the H atom of the N-H moiety of Ehim + to neighboring water molecules through preferential hydrogen bonding. The jump in the concentration of water-water hydrogen bonds occurs at the Ehim + /water concentration at which the orientational relaxation deviates from hydrodynamic behavior. This structural observation is confirmed with FT-IR spectra that show asymmetry in the peak for the O-D stretch that is indicative of water clusters. The formation of water clusters and the strengthening of the N-H … OH 2 hydrogen bonds slow the orientational relaxation of Ehim + cations as observed by the OHD-OKE experiments.

14 SOLAR ENERGY↗

Solution-state conformational ensemble of a hexameric prophyrin array characterized using molecular dynamics and x-ray scattering.

Solution-phase X-ray scattering measurements in combination with coordinate-based modeling have been used to characterize the conformational ensemble of a hexameric, diphenylethyne-linked porphyrin array in solution. Configurationally broadened X-ray scattering patterns measured at room temperature for dilute toluene solutions of the porphyrin array were compared to scattering patterns calculated from structural ensembles in constant pressure and temperature molecular dynamics simulations. Thermal fluctuations sampled at picosecond intervals within nanosecond time scale dynamic simulations show large-amplitude motions that include porphyrin ring 'tipping' around the porphyrin linkage axes and extended hexameric porphyrin array 'breathing' motions involving torsional distortions collectively distributed along porphyrin and diphenylethyne groups. Each type of group motion produced characteristic, angle-dependent dampening of scattering features that are needed to reproduce dampening features in the experimental X-ray scattering. However, mismatches in the magnitudes of experimental and simulated dampening of high-angle X-ray scattering patterns show that large-amplitude hexamer array breathing-type motions are significantly under-represented in the simulated ensembles. This comparison between experiment and simulation provides a means not only to interpret scattering data in terms of an explicit atomic model but more generally demonstrates the use of solution X-ray scattering as an experimental benchmark for the development of simulation methods that more accurately predict configurational dynamics of supramolecular assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations of electrothermal instability growth in solid aluminum rods

A recent publication [K. J. Peterson et al., Phys. Plasmas 19, 092701 (2012)] describes simulations and experiments of electrothermal instability growth on well characterized initially solid aluminum and copper rods driven with a 20 MA, 100 ns rise time current pulse on Sandia National Laboratories Z accelerator. Quantitative analysis of the high precision radiography data obtained in the experiments showed excellent agreement with simulations and demonstrated levels of instability growth in dense matter that could not be explained by magneto-Rayleigh-Taylor instabilities alone. This paper extends the previous one by examining the nature of the instability growth in 2D simulations in much greater detail. The initial instability growth in the simulations is shown via several considerations to be predominantly electrothermal in nature and provides a seed for subsequent magneto-Rayleigh-Taylor growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of pulsed neutron uranium logging instrument

This article introduces a development of pulsed neutron uranium logging instrument. By analyzing the temporal distribution of epithermal neutrons generated from the thermal fission of {sup 235}U, we propose a new method with a uranium-bearing index to calculate the uranium content in the formation. An instrument employing a D-T neutron generator and two epithermal neutron detectors has been developed. The logging response is studied using Monte Carlo simulation and experiments in calibration wells. The simulation and experimental results show that the uranium-bearing index is linearly correlated with the uranium content, and the porosity and thermal neutron lifetime of the formation can be acquired simultaneously.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analytical and experimental investigation of liquid double drop dynamics: Preliminary design for space shuttle experiments

The preliminary grant assessed the use of laboratory experiments for simulating low g liquid drop experiments in the space shuttle environment. Investigations were begun of appropriate immiscible liquid systems, design of experimental apparatus and analyses. The current grant continued these topics, completed construction and preliminary testing of the experimental apparatus, and performed experiments on single and compound liquid drops. A continuing assessment of laboratory capabilities, and the interests of project personnel and available collaborators, led to, after consultations with NASA personnel, a research emphasis specializing on compound drops consisting of hollow plastic or elastic spheroids filled with liquids.

Source record↗

Numerical Simulation of Aircraft Trailing Vortices

The increase in air traffic is currently outpacing the development of new airport runways. This is leading to greater air traffic congestion, resulting in costly delays and cancellations. The National Aeronautics and Space Administration (NASA) under its Terminal Area Productivity (TAP) program is investigating new technologies that will allow increased airport capacity while maintaining the present standards for safety. As an element of this program, the Aircraft Vortex Spacing System (AVOSS) is being demonstrated in July 2000, at Dallas Ft-Worth Airport. This system allows reduced aircraft separations, thus increasing the arrival and departure rates, while insuring that wake vortices from a leading aircraft do not endanger trailing aircraft. The system uses predictions or wake vortex position and strength based on input from the current weather state. This prediction is accomplished by a semi-empirical model developed from theory, field observations, and relationships derived from numerical wake vortex simulations. Numerical experiments with a Large Eddy Simulation (LES) model are being conducted in order to provide guidance for the enhancement of these prediction algorithms. The LES Simulations of wake vortices are carried out with NASA's Terminal Area Simulation System (TASS). Previous wake vortex investigations with TASS are described. The primary objective of these numerical studies has been to quantify vortex transport and decay in relation to atmospheric variables. This paper summarizes many of the previous investigations with the TASS model and presents some new results regarding the onset of wake vortex decay.

Proctor, Fred H.↗