Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sequence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Habitable Zones Around Main-Sequence Stars: Dependence on Planetary Mass

The ongoing discoveries of extra-solar planets are unveiling a wide range of terrestrial mass (size) planets around their host stars. In this Letter, we present estimates of habitable zones (HZs) around stars with stellar effective temperatures in the range 2600 K-7200 K, for planetary masses between 0.1M and 5M. Assuming H2O-(inner HZ) and CO2-(outer HZ) dominated atmospheres, and scaling the background N2 atmospheric pressure with the radius of the planet, our results indicate that larger planets have wider HZs than do smaller ones. Specifically, with the assumption that smaller planets will have less dense atmospheres, the inner edge of the HZ (runaway greenhouse limit) moves outward (approx.10% lower than Earth flux) for low mass planets due to larger greenhouse effect arising from the increased H2O column depth. For larger planets, the H2O column depth is smaller, and higher temperatures are needed before water vapor completely dominates the outgoing long-wave radiation. Hence the inner edge moves inward (approx.7% higher than Earth's flux). The outer HZ changes little due to the competing effects of the greenhouse effect and an increase in albedo. New, three-dimensional climate model results from other groups are also summarized, and we argue that further, independent studies are needed to verify their predictions. Combined with our previous work, the results presented here provide refined estimates of HZs around main-sequence stars and provide a step toward a more comprehensive analysis of HZs.

main sequence starts↗
NASA NTRS2015

Enabling Performance-Based Navigation Arrivals: Development and Simulation Testing of the Terminal Sequencing and Spacing System

NASA has developed an advanced arrival management capability for terminal controllers, known as Terminal Sequencing and Spacing (TSS). TSS increases use of performance-based navigation (PBN) arrival procedures during periods of high traffic demand. It extends two Federal Aviation Administration's operational systems with terminal metering and controller spacing tools. Sixteen high-fidelity human-in-the-loop simulations, involving more than five hundred hours of evaluation time, were conducted to mature TSS from proof-of- concept design to fully functional prototype. These simulations modeled arrival procedures at several U.S. airports, incorporated a broad range of traffic demand profiles and wind conditions, and used controllers with extensive operational experience. Two fundamental metrics are evaluated for these simulations: PBN Success Rate and Inter-Arrival Spacing Error. The PBN Success Rate shows a definitive trend when TSS is used. It increases from 42 percent for today's operations to 68 percent for terminal metering only and 92 percent for terminal metering with controller-managed spacing tools. Meanwhile, the Inter-Arrival Spacing Error improves 25 to 35 percent when TSS is used compared to not used. The TSS technology was transferred to the FAA and, and it is targeted for deployment to several busy airports in the U.S. starting in 2018.

terminal metering↗
DOE OSTI2023

Integer Sequences from Configurations in the Hausdorff Metric Geometry via Edge Covers of Bipartite Graphs

The Hausdorff metric provides a way to measure the distance between nonempty compact sets in $\mathbb{R}^N$, from which we can build a geometry of sets. This geometry is very different than the standard Euclidean geometry and provides many interesting results. In this paper we focus on line segments in this geometry, where pairs of disjoint sets $A$ and $B$ satisfying certain distance conditions have the property that there are exactly $m$ different sets on the line segment $\overline{AB}$ at every distance from $A$, where $m$ can assume many values different than one. We provide new families of sets that generate previously unrecorded integer sequences via these values of $m$ by connecting the values of $m$ to the number of edge coverings of a graph corresponding to the sets $A$ and $B$.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Dynamic Triggering of Mud Volcano Eruptions During the 2016-2017 Central Italy Seismic Sequence: Triggering of mud volcano eruptions

On 24 August 2016 a seismic event (Mw6.0) was the first of the long Central Italy sequence (ongoing at the end of 2017) of medium-to-high magnitude earthquakes, with nine Mw≥5 up to October 2017, and with about 74.000 seismic events registered after 1 year. The largest was the Mw6.5 30 October 2016 event near Norcia. After the major seismic events, 17 mud volcanoes erupted around Monteleone di Fermo village (Marche region). Mud volcano eruptions generally occurred a few hours to a few days after the main earthquakes, suggesting a seismic triggering. We analyzed the peak ground velocities and dynamic stresses during the three largest earthquakes. We also evaluated the static stress changes in order to assess the potential influence of normal stress changes on the feeder system of the activated mud volcanoes. We find a correlation with dynamic stresses, whereas static stress changes are negligible or negative (with values reaching -0.44 bar, clamping feeder dykes). We conclude that seismic shaking (up to ~3.9 bar during Norcia earthquake) is the dominant driver for these eruptions. Finally, we evaluated the response ratio as a function of the dynamic stress. It increases exponentially with peak dynamic stress varying from <10% for peak dynamic stress >0.3 bar to >50% for peak dynamic stress >2 bar, indicating a link between earthquake shaking and mud volcano activity.

58 GEOSCIENCES↗
DOE OSTI2014

Molecular Design of Antifouling Polymer Brushes Using Sequence-Specific Peptoids

Material systems that can be used to flexibly and precisely define the chemical nature and molecular arrangement of a surface would be invaluable for the control of complex biointerfacial interactions. For example, progress in antifouling polymer biointerfaces that prevents nonspecific protein adsorption and cell attachment, which can significantly improve the performance of an array of biomedical and industrial applications, is hampered by a lack of chemical models to identify the molecular features conferring their properties. Poly(N-substituted glycine) “peptoids” are peptidomimetic polymers that can be conveniently synthesized with specific monomer sequences and chain lengths, and are presented as a versatile platform for investigating the molecular design of antifouling polymer brushes. Zwitterionic antifouling polymer brushes have captured significant recent attention, and a targeted library of zwitterionic peptoid brushes with different charge densities, hydration, separations between charged groups, chain lengths, and grafted chain densities, is quantitatively evaluated for their antifouling properties through a range of protein adsorption and cell attachment assays. Specific zwitterionic brush designs are found to give rise to distinct but subtle differences in properties. In conclusion, the results also point to the dominant roles of the grafted chain density and chain length in determining the performance of antifouling polymer brushes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Copolyesters developed from bio‐based 2,5‐furandicarboxylic acid: Synthesis, sequence distribution, mechanical, and barrier properties of poly(propylene‐ co ‐1,4‐cyclohexanedimethylene 2,5‐furandicarboxylate)s

ABSTRACT A series of poly(propylene‐ co ‐1,4‐cyclohexanedimethylene 2,5‐furandicarboxylate)s (PPCFs) with different compositions were synthesized from bio‐based aromatic monomer 2,5‐furandicarboxylic acid and 1,3‐propanediol (PDO), along with 1,4‐cyclohexanedimethylene (CHDM). The chemical structure, composition, and sequence distribution of PPCFs were determined by nuclear magnetic resonance ( 1 H NMR and 13 C NMR). Results showed that the compositions of copolyesters depended on the feed molar ratio of PDO and CHDM, and all the obtained PPCFs copolyesters had triad component in a random sequential structure. With the addition of CHDM, the gas barrier properties of poly(propylene 2,5‐furandicarboxylate) (PPF) deteriorated. However, when the content of CHDM reached 79%, PPCF79 still showed the CO 2 and O 2 barrier improvement factor of 4.5 and 3.25, respectively, which were better than those of poly(ethylene naphthalate), a well‐known polymer with barrier property. Besides, PPCF79 showed good performance on tensile modulus, tensile strength, elongation at break, and the crystallization enthalpy was improved from 3.2 J g −1 for PPF to 30.7 J g −1 for PPCF79. It has the potential to serve as a promising bio‐based polymer with excellent comprehensive performance. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 47291.

Jia, Zhen↗
DOE OSTI2019

Development of polymorphic simple sequence repeat markers in Huperzia serrata (Lycopodiaceae)

Premise The natural population size of Huperzia serrata (Lycopodiaceae) has dramatically decreased and the species has become endangered due to overexploitation. Here, we developed simple sequence repeat ( SSR ) markers for H. serrata to survey both its genetic diversity and population structure. Methods and Results Based on 177 individuals, 120 SSR primer pairs were developed and optimized from five regions of the H. serrata transcriptomic data. Of these primer pairs, 20 were successfully amplified and 10 showed obvious polymorphism. These polymorphic loci were investigated to study the genetic diversity of H. serrata . Two to 11 alleles per locus were identified, the level of observed heterozygosity ranged from 0.00 to 1.00, and the level of expected heterozygosity ranged from 0.19 to 0.79. All loci were successfully amplified in H. crispata , H. sutchueniana , and H. selago . Conclusions The 10 polymorphic primer pairs developed here will be valuable for studies of the endangered H. serrata and other related species.

Guo, Bin↗
DOE OSTI2022

Enhanced detection of paramagnetic fluorine-19 magnetic resonance imaging agents using zero echo time sequence and compressed sensing

Fluorine-19 ( 19 F) magnetic resonance imaging (MRI) is an emerging technique offering specific detection of labeled cells in vivo. Lengthy acquisition times and modest signal-to-noise ratio (SNR) makes three-dimensional spin-density–weighted 19 F imaging challenging. Recent advances in tracer paramagnetic metallo-perfluorocarbon (MPFC) nanoemulsion probes have shown multifold SNR improvements due to an accelerated 19 F T 1 relaxation rate and a commensurate gain in imaging speed and averages. However, 19 F T 2 -reduction and increased linewidth limit the amount of metal additive in MPFC probes, thus constraining the ultimate SNR. To overcome these barriers, we describe a compressed sampling (CS) scheme, implemented using a “zero” echo time (ZTE) sequence, with data reconstructed via a sparsity-promoting algorithm. Our CS-ZTE scheme acquires k-space data using an undersampled spherical radial pattern and signal averaging. Image reconstruction employs off-the-shelf sparse solvers to solve a joint total variation and -norm regularized least square problem. To evaluate CS-ZTE, we performed simulations and acquired 19 F MRI data at 11.7 T in phantoms and mice receiving MPFC-labeled dendritic cells. For MPFC-labeled cells in vivo, we show SNR gains of ~6.3 × with 8-fold undersampling. We show that this enhancement is due to three mechanisms including undersampling and commensurate increase in signal averaging in a fixed scan time, denoising attributes from the CS algorithm, and paramagnetic reduction of T 1 . Importantly, 19 F image intensity analyses yield accurate estimates of absolute quantification of 19 F spins. Overall, the CS-ZTE method using MPFC probes achieves ultrafast imaging, a substantial boost in detection sensitivity, accurate 19 F spin quantification, and minimal image artifacts.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Toward controlled functional sequencing and hierarchical structuring in imidazolium ionenes

This focused mini-review highlights recent advances related to the design and applications of imidazolium ionenes and forward-looking perspectives. Creative strategies which employ established synthetic approaches and utilize the modularity of the imidazole moiety unlock great potential for tailoring both functional and structural features arising from precise spacing of ionic groups within the polymer backbone. Here, as imidazolium ionenes draw more interest, increased sophistication of chemical modifications and material processing is occurring, with a corresponding shift toward more demanding applications. Synthetic routes for placement and sequencing of ionic content are discussed, in addition to recent approaches to control structure and self-assembly or tune behaviors of imidazolium ionenes and composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Proteogenomic strategies for identification of aberrant cancer peptides using large-scale Next Generation Sequencing data

Cancer is driven by the acquisition of somatic DNA lesions. Distinguishing the early driver mutations from subsequent passenger mutations is key to molecular sub-typing of cancers, and the discovery of novel biomarkers. The availability of genomics technologies (mainly wholegenome and exome sequencing, and transcript sampling via RNA-seq, collectively referred to as NGS) have fueled recent studies on somatic mutation discovery. However, the vision is challenged by the complexity, redundancy, and errors in genomic data, and the difficulty of investigating the proteome using only genomic approaches. Recently, combination of proteomic and genomic technologies are increasingly employed. However, the complexity and redundancy of NGS data remains a challenge for proteogenomics, and various trade-offs must be made to allow for the searches to take place. This paperprovides a discussion of two such trade-offs, relating to large database search, and FDR calculations, and their implication to cancer proteogenomics. Moreover, it extends and develops the idea of a unified genomic variant database that can be searched by any mass spectrometry sample. A total of 879 BAM files downloaded from TCGA repository were used to create a 4.34 GB unified FASTA database which contained 2,787,062 novel splice junctions, 38,464 deletions, 1105 insertions, and 182,302 substitutions. Proteomic data from a single ovarian carcinoma sample (439,858 spectra) was searched against the database. By applying the most conservative FDR measure, we have identified 524 novel peptides and 65,578 known peptides at 1% FDR threshold. The novel peptides include interesting examples of doubly mutated peptides, frame-shifts, and non-sample-recruited mutations, which emphasize the strength of our approach.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2012

The impact of CRISPR repeat sequence on structures of a Cas6 protein-RNA complex

The repeat-associated mysterious proteins (RAMPs) comprise the most abundant family of proteins involved in prokaryotic immunity against invading genetic elements conferred by the clustered regularly interspaced short palindromic repeat (CRISPR) system. Cas6 is one of the first characterized RAMP proteins and is a key enzyme required for CRISPR RNA maturation. Despite a strong structural homology with other RAMP proteins that bind hairpin RNA, Cas6 distinctly recognizes single-stranded RNA. Previous structural and biochemical studies show that Cas6 captures the 5' end while cleaving the 3' end of the CRISPR RNA. Here, we describe three structures and complementary biochemical analysis of a noncatalytic Cas6 homolog from Pyrococcus horikoshii bound to CRISPR repeat RNA of different sequences. Our study confirms the specificity of the Cas6 protein for single-stranded RNA and further reveals the importance of the bases at Positions 5-7 in Cas6-RNA interactions. Substitutions of these bases result in structural changes in the protein-RNA complex including its oligomerization state.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Convergent behavior of extended stalk regions from staphylococcal surface proteins with widely divergent sequence patterns

Staphylococcus epidermidis and Staphylococcus aureus are highly problematic bacteria in hospital settings. A major challenge is their ability to form biofilms on abiotic or biotic surfaces. Biofilms are well-organized, multicellular bacterial aggregates that resist antibiotic treatment and often lead to recurrent infections. Bacterial cell wall-anchored (CWA) proteins are important players in biofilm formation and infection. Many have putative stalk-like regions or regions of low complexity near the cell wall-anchoring motif. Recent work demonstrated the strong propensity of the stalk region of S. epidermidis accumulation-associated protein (Aap) to remain highly extended under solution conditions that typically induce compaction. This behavior is consistent with the expected function of a stalk-like region that is covalently attached to the cell wall peptidoglycan and projects the adhesive domains of Aap away from the cell surface. In this study, we evaluate whether the ability to resist compaction is a common theme among stalk regions from various staphylococcal CWA proteins. Circular dichroism spectroscopy was used to examine secondary structure changes as a function of temperature and cosolvents along with sedimentation velocity analytical ultracentrifugation, size-exclusion chromatography, and SAXS to characterize structural characteristics in solution. All stalk regions tested are intrinsically disordered, lacking secondary structure beyond random coil and polyproline type II helix, and they all sample highly extended conformations. Remarkably, the Ser-Asp dipeptide repeat region of SdrC exhibited nearly identical behavior in solution when compared to the Aap Pro/Gly-rich region, despite highly divergent sequence patterns, indicating conservation of function by various distinct staphylococcal CWA protein stalk regions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Targeted mutagenesis with sequence–specific nucleases for accelerated improvement of polyploid crops: Progress, challenges, and prospects

Many of the world's most important crops are polyploid. The presence of more than two sets of chromosomes within their nuclei and frequently aberrant reproductive biology in polyploids present obstacles to conventional breeding. The presence of a larger number of homoeologous copies of each gene makes random mutation breeding a daunting task for polyploids. Genome editing has revolutionized improvement of polyploid crops as multiple gene copies and/or alleles can be edited simultaneously while preserving the key attributes of elite cultivars. Most genome–editing platforms employ sequence–specific nucleases (SSNs) to generate DNA double–stranded breaks at their target gene. Such DNA breaks are typically repaired via the error–prone nonhomologous end–joining process, which often leads to frame shift mutations, causing loss of gene function. Genome editing has enhanced the disease resistance, yield components, and end–use quality of polyploid crops. However, identification of candidate targets, genotyping, and requirement of high mutagenesis efficiency remain bottlenecks for targeted mutagenesis in polyploids. In this review, we will survey the tremendous progress of SSN–mediated targeted mutagenesis in polyploid crop improvement, discuss its challenges, and identify optimizations needed to sustain further progress.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Water-table and discharge changes associated with the 2016–2017 seismic sequence in central Italy: hydrogeological data and a conceptual model for fractured carbonate aquifers

A seismic sequence in central Italy from August 2016 to January 2017 affected groundwater dynamics in fractured carbonate aquifers. Changes in spring discharge, water-table position, and streamflow were recorded for several months following nine Mw 5.0–6.5 seismic events. Data from 22 measurement sites, located within 100 km of the epicentral zones, were analyzed. The intensity of the induced changes were correlated with seismic magnitude and distance to epicenters. The additional post-seismic discharge from rivers and springs was found to be higher than 9 m{sup 3}/s, totaling more than 0.1 km{sup 3} of groundwater release over 6 months. This huge and unexpected contribution increased streamflow in narrow mountainous valleys to previously unmeasured peak values. Analogously to the L’Aquila 2009 post-earthquake phenomenon, these hydrogeological changes might reflect an increase of bulk hydraulic conductivity at the aquifer scale, which would increase hydraulic heads in the discharge zones and lower them in some recharge areas. The observed changes may also be partly due to other mechanisms, such as shaking and/or squeezing effects related to intense subsidence in the core of the affected area, where effects had maximum extent, or breaching of hydraulic barriers.

58 GEOSCIENCES↗