Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Effect of strain and stress on the relative dimensions of the 'hard' and 'soft' regions in crept NaCl single crystals

It is shown that the L exp h and L exp s ratio, where these are respectively the average dimensions of the hard and soft regions as a function of stress and strain in crept NaCl single crystals, significantly influences the steady-state creep and power-law breakdown in these crystals. This is suggested to be due to a change in the internal stresses of the material. The present observations also indicate that steady-state creep is more likely to be influenced by the degree of refinement in the cell boundaries within the subgrains than by the formation of equiaxed subgrains under power-law conditions.

S. V. Raj↗

Preliminary evaluation of tensile and stress-rupture behavior of W + 24 at. pct Re + 0.4 at. pct HfC wire

Results are presented of an evaluation of tensile properties and stress-rupture bahavior of a small-diameter W24ReHfC (W-24Re-0.4(HfC)) wire, which is considered to be an excellent reinforcing fiber candidate for a variety of metal-matrix composites. The results were compared to data of Petrasek (1972) on W4ReHfC (W-4Re-0.4(HfC)) wire. It was found that the room-temperature (RT) tensile strength of the W24ReHfC wire was about 3250 MPa, higher than that of the W4ReHfC (3160 MPa) and WHfC (2250 MPa) wires. Above 1366 K, the W4ReHfC wire had both a greater tensile strength and the stress rupture strength than the W24ReHfC wire.

Yun, H. M.↗

Experimental investigations of the time and flow-direction responses of shear-stress-sensitive liquid crystal coatings

Time and flow-direction responses of shearstress-sensitive liquid crystal coatings were explored experimentally. For the time-response experiments, coatings were exposed to transient, compressible flows created during the startup and off-design operation of an injector-driven supersonic wind tunnel. Flow transients were visualized with a focusing Schlieren system and recorded with a 1000 frame/sec color video camera. Liquid crystal responses to these changing-shear environments were then recorded with the same video system, documenting color-play response times equal to, or faster than, the time interval between sequential frames (i.e., 1 millisecond). For the flow-direction experiments, a planar test surface was exposed to equal-magnitude and known-direction surface shear stresses generated by both normal and tangential subsonic jet-impingement flows. Under shear, the sense of the angular displacement of the liquid crystal dispersed (reflected) spectrum was found to be a function of the instantaneous direction of the applied shear. This technique thus renders dynamic flow reversals or flow divergences visible over entire test surfaces at image recording rates up to 1 KHz. Extensions of the technique to visualize relatively small changes in surface shear stress direction appear feasible.

Reda, Daniel C.↗

Detection of metal stress in boreal forest species using the 0.67-micron chlorophyll absorption band

Several recent studies have shown that a shift of the red-edge inflection near 0.70 micron in vegetation reflectance spectra is an indicator of metal stress, partially attributable to changes in chlorophyll concentration. This 'red-edge shift', however, is difficult to detect and has been reported both toward longer (red) and shorter (blue) wavelengths. Our work demonstrates that direct measurement of the depth and width of the chlorophyll absorption band at 0.67 micron using digital feature extraction and absorption band characterization procedures developed for the analysis of mineral spectra is a more consistent indicator of metal stress. Additionally, the magnitude of these parameters is generally greater than that of the red edge shift and thus should be more amenable to detection and mapping using field and aircraft spectrometers.

Singhroy, Vernon H.↗

Perspective - Systematic study of Reynolds stress closure models in the computations of plane channel flows

The roles of pressure-strain and turbulent diffusion models in the numerical calculation of turbulent plane channel flows with second-moment closure models are investigated. Three turbulent diffusion and five pressure-strain models are utilized in the computations. The main characteristics of the mean flow and the turbulent fields are compared against experimental data. All the features of the mean flow are correctly predicted by all but one of the Reynolds stress closure models. The Reynolds stress anisotropies in the log layer are predicted to varying degrees of accuracy (good to fair) by the models. None of the models could predict correctly the extent of relaxation towards isotropy in the wake region near the center of the channel. Results from the directional numerical simulation are used to further clarify this behavior of the models.

Demuren, A. O.↗

The effects of stress and physical aging on the creep compliance of a polymeric composite

An experimental study was performed to determine the effects of stress and physical aging on the matrix dominated viscoelastic properties of IM7/8320, a high temperature fiber reinforced thermoplastic composite. Established creep/aging test techniques developed for polymers were adapted for testing of the composite material. The transverse and shear compliance for an orthotropic plate were found from creep compliance measurements at constant, sub-Tg temperatures. These compliance terms were shown to be effected by physical aging. Aging time shift factors and shift rates were found to be a function of applied stress.

Gates, Thomas E.↗

On the use of the hole-drilling technique for residual stress measurements in thin plates

The strain gage blind hole-drilling technique may be used to determine residual stresses at and below the surface of components. In this paper, the hole-drilling analysis methodology for thick plates is reviewed, and experimental data are used to evaluate the methodology and to assess its applicability to thin plates. Data on the effects of gage pattern, surface preparation, hole spacing, hole eccentricity, and stress level are also presented.

Hampton, R. W.↗

A Reynolds stress model for near-wall turbulence

The paper formulates a tensorially consistent near-wall second-order closure model. Redistributive terms in the Reynolds stress equations are modeled by an elliptic relaxation equation in order to represent strongly nonhomogeneous effects produced by the presence of walls; this replaces the quasi-homogeneous algebraic models that are usually employed, and avoids the need for ad hoc damping functions. The model is solved for channel flow and boundary layers with zero and adverse pressure gradients. Good predictions of Reynolds stress components, mean flow, skin friction, and displacement thickness are obtained in various comparisons to experimental and direct numerical simulation data. The model is also applied to a boundary layer flowing along a wall with a 90-deg, constant-radius, convex bend.

Durbin, P. A.↗

Optical methods of stress analysis applied to cracked components

After briefly describing the principles of frozen stress photoelastic and moire interferometric analyses, and the corresponding algorithms for converting optical data from each method into stress intensity factors (SIF), the methods are applied to the determination of crack shapes, SIF determination, crack closure displacement fields, and pre-crack damage mechanisms in typical aircraft component configurations.

Smith, C. W.↗

Analytical stress intensity solution for the Stable Poisson Loaded specimen

An analytical calibration of the Stable Poisson Loaded (SPL) specimen is presented. The specimen configuration is similar to the ASTM E-561 compact-tension specimen with displacement controlled wedge loading used for R-curve determination. The crack mouth opening displacements (CMODs) are produced by the diametral expansion of an axially compressed cylindrical pin located in the wake of a machined notch. Due to the unusual loading configuration, a three-dimensional finite element analysis was performed with gap elements simulating the contact between the pin and specimen. In this report, stress intensity factors, CMODs, and crack displacement profiles, are reported for different crack lengths and different contacting conditions. It was concluded that the computed stress intensity factor decreases sharply with increasing crack length thus making the SPL specimen configuration attractive for fracture testing of brittle, high modulus materials.

Ghosn, Louis J.↗

Stress relaxation of low pressure plasma-sprayed NiCrAlY alloys

The stress relaxation behavior of three NiCrAlY alloys that are commonly used as bond coats for thermal barrier coatings (TBCs) has been directly measured. The relaxation study was conducted at temperatures of 800-1000 C and over a wide range of stresses. It was established that all three bond coat alloys relaxed quite rapidly at temperatures of 900 C and above. Since the upper use temperatures for bond coats in gas turbine engines are between 900 and 1000 C, bond coat relaxation is expected to occur in service. Therefore, relaxation of the bond coat has the potential to affect TBC life. Furthermore, the relaxation differences observed between the three alloys offers a possible explanation for the differences in TBC life observed for these bond coats. While bond coat relaxation is expected to occur for a TBC in service, the mechanism for a relaxation effect on TBC life, if it exists, is yet to be determined.

Brindley, W. J.↗

The effect of fiber microstructure on evolution of residual stresses in silicon carbide/titanium aluminide composites

This paper examines the effect of the morphology of the SCS6 silicon carbide fiber on the evolution of residual stresses in SiC/Ti composites. A micromechanics model based on the concentric cylinder concept is presented which is used to calculate residual stresses in a SiC/Ti composite during axisymmetric cooling by a spatially uniform temperature change. The silicon carbide fiber is modeled as a layered material with five distinct transversely isotropic and orthotropic, elastic layers, whereas the titanium matrix is taken to be isotropic, with temperature-dependent elastoplastic properties. The results arc compared with those obtained based on the assumption that the silicon carbide fiber is isotropic and homogeneous.

Pindera, Marek-Jerzy↗

Relation of Rib Spacing to Stress in Wing Planes

The stress relations to the fabric and the rib consequent upon a change of spacing between ribs in a wing plane are discussed. Considering the wing plane as a static structure, and ignoring the question of aerodynamic efficiency, it appears that the unit stress in the rib and fabric will remain constant for constant p if the linear dimensions of both rib and fabric are increased alike, viz., if wing and fabric remain geometrically similar. Since the bulge and the structural dimensions remain geometrically similar, the whole distended plane remains so, and hence should have the same pressure distribution and efficiency. If therefore the Burgess rule of making the rib spacing always one-fifth of the chord of the plane be valid, it must be valid for all others that are mechanically similar in structure and covering.

Zahm, A F↗

A Short Method of Calculating Torsional Stresses in an Airplane Fuselage

This report deals with an investigation carried out in the Civil Engineering Laboratory of the University of California, to determine the accuracy of existing methods of computing the stresses in an airplane fuselage when subjected to torsion, and to derive a simple approximate formula for the rapid calculation of these stresses.

Younger, John E↗

Working charts for the stress analysis of elliptic rings

This report presents charts which reduce the stress analysis of circular and elliptic rings of uniform cross section subjected to balanced systems of concentrated loads from a statically indeterminate problem to a statically determinate one. To demonstrate the use of the charts in the stress analysis of elliptic rings, an illustrative problem is included.

Burke, Walter F↗

Bending stresses due to torsion in cantilever box beams

The paper beings with a brief discussion on the origin of the bending stresses in cantilever box beams under torsion. A critical survey of existing theory is followed by a summary of design formulas; this summary is based on the most complete solution published but omits all refinements considered unnecessary at the present state of development. Strain-gage tests made by NACA to obtained some experimental verification of the formulas are described next. Finally, the formulas are applied to a series of box beams previously static-tested by the U.S. Army Air Corps; the results show that the bending stresses due to torsion are responsible to a large extent for the free-edge type of failure frequently experienced in these tests.

Kuhn, Paul↗

Formulas for the Stress Analysis of Circular Rings in a Monocoque Fuselage

The formulas given in this report provide a simplified method for the stress-analysis of fuselage bulkheads that are approximately circular rings of uniform cross section. Complicated load systems acting on a ring can usually be resolved into simplified load systems; and formulas for moment, axial force, and shear for such simplified load systems are given in this report. Illustrative examples showing the use of this method in practical stress-analysis work are also included.

Miller, Roy A↗