Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Realizability Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Mobile Propagation Results from Using the ACTS Mobile Terminal

NASA's Advanced Communications Technology Satellite (ACTS) provides an ideal spaced-based platform for analyzing the Ka-band mobile satellite channel. This paper reports on the results of the Ka-band mobile propagation analysis campaign using the ACTS Mobile Terminal (AMT) developed by the Jet Propulsion Laboratory (JPL). The objectives of the mobile propagation experiments were to measure and analyze the fading characteristics of the Ka-band channel. The analysis involved examining pilot tone tests in three environments: lightly shadowed suburban, moderately shadowed suburban, and heavily shadowed suburban. The results indicate that Ka-band pilot tones experience significant multipath and fading effects. It may be possible to design link margins to provide reliable service for the lightly shadowed suburban environment at Ka-band. However, for areas with moderate and heavy shadowing, the link margin required to realize reliable communications with 99% availability is excessive (26 dB for moderate shadowing, and greater then 30 dB for heavy shadowing). An alternate approach would be to use shadowing/fading countermeasures (e.g., interleaved error control coding and antenna diversity). Such mitigation techniques, necessary for reliable Ka-band mobile communication within a suburban environment, are currently being considered within the NASA program.

Pinck, Deborah↗

A Modern Load Relief Guidance Scheme for Space Launch Vehicles

Launch vehicle load relief algorithms are concerned with realizing a reduction of transient bending moments near maximum dynamic pressure. Traditional approaches to load relief typically use inner-loop acceleration feedback to reduce the wind-induced angle of attack. When implemented in the inner loop, load relief bandwidth is necessarily limited by the achievable stability margins, and when acceleration feedback is employed, by the uncertainty associated with structural modes that couple with the body-mounted accelerometer. The structure of inner loop load relief increases the dimensionality of the flight control gain and filter optimization problem. Most importantly, classical load relief laws do not take advantage of high-rate and high-accuracy GPS-aided inertial velocity data that is readily available from modern strap down IMUs. In this paper, a novel load relief guidance scheme is described that uses direct angle-of-attack feedback in a clever mechanization. The steering commands are determined by examining the wind-perturbed dynamics of a launch vehicle with respect to a gravity turn ascent trajectory. An angle of attack estimate is derived from GPS-aided inertial data and pre-launch range wind measurements, and it is shown that a reduction worst-case rigid-body loads can be realized without requiring air data. The algorithm also includes a high-rate navigation data preprocessing scheme that operates directly on the IMU delta-theta and delta-velocity measurements in order to produce a filtered acceleration estimate at the vehicle center of mass. The outer-loop guidance scheme simplifies the design process for the classical inner-loop autopilot. Algorithm performance is demonstrated using Monte Carlo analysis of a representative liquid booster in a production high fidelity launch vehicle simulation.

NESC↗

Trades, Architecture, and Design of the Joint Augmented Reality Visual Informatics System (Joint AR) Product

Future expeditions will enable exploration and study of the planetary surfaces of the Moon and Mars by performing extravehicular activity (EVA) operations. Present-day International Space Station (ISS) EVA operations require an intricate choreography of crew, space suits, tools, systems, and flight teams to plan, train, and execute with limited advanced informatics. In this paper, the Joint Augmented Reality Visual Informatics System (Joint AR) project team at NASA Johnson Space Center (JSC) characterizes the design space for developing a modular augmented reality (AR) device for a spacesuit form factor that can support crew decision-making for EVA. The Joint AR product was defined via trade studies and market analysis of previous EVA display efforts, various AR components such as optics, commercial AR systems, light engines, data interfaces, and graphics engine software. This paper outlines the defining architectural design decisions, including safety criticality considerations, interfaces, and computer architectures. The outcomes of these studies result in a prototype design which is defined here as the Joint AR product. This work aims to enable a community-wide discussion toward realizing necessary suit-compatible AR features and capabilities for future missions.

Paromita Mitra↗

Trades, Architecture, and Design of the Joint Augmented Reality Visual Informatics System (Joint AR) Product

Future expeditions will enable exploration and study of the planetary surfaces of the Moon and Mars by performing extravehicular activity (EVA) operations. Present-day International Space Station (ISS) EVA operations require an intricate choreography of crew, space suits, tools, systems, and flight teams to plan, train, and execute with limited advanced informatics. In this paper, the Joint Augmented Reality Visual Informatics System (Joint AR) project team at NASA Johnson Space Center (JSC) characterizes the design space for developing a modular augmented reality (AR) device for a spacesuit form factor that can support crew decision-making for EVA. The Joint AR product was defined via trade studies and market analysis of previous EVA display efforts, various AR components such as optics, commercial AR systems, light engines, data interfaces, and graphics engine software. This paper outlines the defining architectural design decisions, including safety criticality considerations, interfaces, and computer architectures. The outcomes of these studies result in a prototype design which is defined here as the Joint AR product. This work aims to enable a community-wide discussion toward realizing necessary suit-compatible AR features and capabilities for future missions.

Paromita Mitra↗

NASA and Advanced Air Mobility (AAM) National Campaign (NC) Tech Talk: Integrated Data Product

NASA Advanced Air Mobility (AAM) National Campaign has hosted multiple flight tests in a effort to promote public confidence and accelerate the realization of emerging aviation markets for passenger and cargo transportation in urban, suburban, rural, and regional environments. The goals and objectives for each flight test are intended to assess the performance of the vehicle’s capacity to operate safely, efficiently, and sustainably in urban areas. The Airspace Test and Infrastructure (ATI) team processes the flight data to evaluate the effectiveness of air vehicle and airspace management integration, while its analysis capabilities support the assessment of the efficacy of proposed vehicles and ground systems required to enable the vehicles’ operations. The ATI data services team creates many products from the data, first by transforming and merging the data into a single Integrated Data Product (IDP). This aligns data from many sources by time, so that, for example, the winds that impacted a flight can be aligned with its ground track and speed. A detailed IDP enables many types of statistical computation and visualizations that help researchers understand what transpired during the flight and how it can be explained. This Tech Talk will give an overview of the IDP process, including examples of the resulting products created by the data services team. It will also share an application that will allow participants to perform their own data analysis.

National Campaign, Advanced Air Mobility, Integrat↗

Bowtie filters for dedicated breast CT: Analysis of bowtie filter material selection

Purpose: For a given bowtie filter design, both the selection of material and the physical design control the energy fluence, and consequently the dose distribution, in the object. Using three previously described bowtie filter designs, the goal of this work is to demonstrate the effect that different materials have on the bowtie filter performance measures. Methods: Three bowtie filter designs that compensate for one or more aspects of the beam-modifying effects due to the differences in path length in a projection have been designed. The nature of the designs allows for their realization using a variety of materials. The designs were based on a phantom, 14 cm in diameter, composed of 40% fibroglandular and 60% adipose tissue. Bowtie design #1 is based on single material spectral matching and produces nearly uniform spectral shape for radiation incident upon the detector. Bowtie design #2 uses the idea of basis-material decomposition to produce the same spectral shape and intensity at the detector, using two different materials. With bowtie design #3, it is possible to eliminate the beam hardening effect in the reconstructed image by adjusting the bowtie filter thickness so that the effective attenuation coefficient for every ray is the same. Seven different materials were chosen to represent a range of chemical compositions and densities. After calculation of construction parameters for each bowtie filter design, a bowtie filter was created using each of these materials (assuming reasonable construction parameters were obtained), resulting in a total of 26 bowtie filters modeled analytically and in the PENELOPE Monte Carlo simulation environment. Using the analytical model of each bowtie filter, design profiles were obtained and energy fluence as a function of fan-angle was calculated. Projection images with and without each bowtie filter design were also generated using PENELOPE and reconstructed using FBP. Parameters such as dose distribution, noise uniformity, and scatter were investigated. Results: Analytical calculations with and without each bowtie filter show that some materials for a given design produce bowtie filters that are too large for implementation in breast CT scanners or too small to accurately manufacture. Results also demonstrate the ability to manipulate the energy fluence distribution (dynamic range) by using different materials, or different combinations of materials, for a given bowtie filter design. This feature is especially advantageous when using photon counting detector technology. Monte Carlo simulation results from PENELOPE show that all studied material choices for bowtie design #2 achieve nearly uniform dose distribution, noise uniformity index less than 5%, and nearly uniform scatter-to-primary ratio. These same features can also be obtained using certain materials with bowtie designs #1 and #3. Conclusions: With the three bowtie filter designs used in this work, the selection of material is an important design consideration. An appropriate material choice can improve image quality, dose uniformity, and dynamic range.

60 APPLIED LIFE SCIENCES↗

Application of the rigorous method to x-ray and neutron beam scattering on rough surfaces

The paper presents a comprehensive numerical analysis of x-ray and neutron scattering from finite-conducting rough surfaces which is performed in the frame of the boundary integral equation method in a rigorous formulation for high ratios of characteristic dimension to wavelength. The single integral equation obtained involves boundary integrals of the single and double layer potentials. A more general treatment of the energy conservation law applicable to absorption gratings and rough mirrors is considered. In order to compute the scattering intensity of rough surfaces using the forward electromagnetic solver, Monte Carlo simulation is employed to average the deterministic diffraction grating efficiency due to individual surfaces over an ensemble of realizations. Some rules appropriate for numerical implementation of the theory at small wavelength-to-period ratios are presented. The difference between the rigorous approach and approximations can be clearly seen in specular reflectances of Au mirrors with different roughness parameters at wavelengths where grazing incidence occurs at close to or larger than the critical angle. This difference may give rise to wrong estimates of rms roughness and correlation length if they are obtained by comparing experimental data with calculations. Besides, the rigorous approach permits taking into account any known roughness statistics and allows exact computation of diffuse scattering.

36 MATERIALS SCIENCE↗

The crucial role of diagnostics in achieving ignition on the National Ignition Facility (NIF)

Well over 100 diagnostics can operate on the National Ignition Facility (NIF) as a result of several decades of development on NIF, and before that on Nova, OMEGA, and earlier LLNL lasers. A subset of these have guided the approach to achieving ignition on the NIF in 2022 [H. Abu-Shawareb et al. (Indirect Drive ICF Collaboration), Phys. Rev. Lett. 129(7), 075001 (2022)]. Achieving ignition on NIF has required many types of experiments with this core set of diagnostics, some constraining known unknowns and some revealing surprises—arguably unknown unknowns. Early design work realized that the extreme precision required for ignition on NIF would require fine-tuning by experiment, that is, measuring and adjusting known unknowns. Many examples are given where the use of the core set of ignition diagnostics in experimental arrangements called platforms demonstrated control of the key theoretical parameters defined as shape, adiabat, velocity, and mix. The direction of the adjustments to input conditions is found either by trend analysis or, in many cases, by observing from the diagnostic data the direction to make an adjustment. In addition, diagnostics have revealed some unexpected or neglected known issues, which degrade performance, or unexpected issues, unknown unknowns. Some of these factors had been previously considered, but underestimated or difficult to calculate at the time. The overall methodology can be described as a variant of Popper's falsifiability philosophy [K. Popper, The Logic of Scientific Discovery (Hutchinson, 1974)]. This paper summarizes the role of ignition diagnostics in terms of falsification or validation of theory or experimental setup as well as uncovering unexpected issues. The journey to ignition started in the seventies with a 1-µm wavelength laser producing disastrous results. Diagnostics have guided us to the recent multi-decadal goal of demonstrating ignition and burn in the laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High Temperature, High AN2 Last Stage Blade for 65% Efficiency Phase I (Final Report)

GE Power (GEP), in partnership with GE Global Research (GEGR)(GEP and GEGR are divisions of General Electric Company) developed hot and large Last Stage Blade (LSB) technologies necessary for state-of-the art gas turbines to successfully realize ~3100°F turbine inlet temperatures (TIT), an essential element to reaching the DOE goal of 65% combined cycle efficiency (CCeff). The objective of this project was to develop conceptual LSB designs and advance the technological understanding of synchronous vibrations (SV), nonsynchronous vibrations (NSV), and damping that limit the current state-of-the-art LSB designs and applications. In the Phase I project GE Power leveraged existing design and analysis knowledge and techniques for LSB design and performed extensive analytical evaluations to identify and characterize conceptual design concepts.

20 FOSSIL-FUELED POWER PLANTS↗

High Temperature, High AN2 Last Stage Blade for 65% Efficiency (Phase I Final Report)

GE Power (GEP), in partnership with GE Global Research (GEGR)(GEP and GEGR are divisions of General Electric Company) have hot and large Last Stage Blade (LSB) technologies necessary for state-of-the art gas turbines to successfully realize ~3100°F turbine inlet temperatures (TIT), an essential element to reaching the DOE goal of 65% combined cycle efficiency (CCeff). The objective of this project was to develop conceptual LSB designs and advance the technological understanding of synchronous vibrations (SV), nonsynchronous vibrations (NSV), and damping that limit the current state-of-the-art LSB designs and applications. In the Phase I project GE Power leveraged existing design and analysis knowledge and techniques for LSB design and performed extensive analytical evaluations to identify and characterize conceptual design concepts. The most promising designs are the basis for development and testing in a potential Phase II project.

20 FOSSIL-FUELED POWER PLANTS↗

ASCEND: Asymptotically compatible strong form foundations for nonlocal discretization

Nonlocal models naturally handle a range of physics of interest to SNL, but discretization of their underlying integral operators poses mathematical challenges to realize the accuracy and robustness commonplace in discretization of local counterparts. This project focuses on the concept of asymptotic compatibility, namely preservation of the limit of the discrete nonlocal model to a corresponding well-understood local solution. We address challenges that have traditionally troubled nonlocal mechanics models primarily related to consistency guarantees and boundary conditions. For simple problems such as diffusion and linear elasticity we have developed complete error analysis theory providing consistency guarantees. We then take these foundational tools to develop new state-of-the-art capabilities for: lithiation-induced failure in batteries, ductile failure of problems driven by contact, blast-on-structure induced failure, brittle/ductile failure of thin structures. We also summarize ongoing efforts using these frameworks in data-driven modeling contexts. This report provides a high-level summary of all publications which followed from these efforts.

97 MATHEMATICS AND COMPUTING↗

Stringy Bubbles Solve de Sitter Troubles

Finding four-dimensional de Sitter spacetime solutions in string theory has been a vexing quest ever since the discovery of the accelerating expansion of the universe. Building on a recent analysis of bubble-nucleation in the decay of (false-vacuum) AdS backgrounds where the interfacing bubbles themselves exhibit a de Sitter geometry we show that this resonates strongly with a stringy cosmic brane construction that naturally provides for an exponential mass-hierarchy and the localization of both gravity and matter, in addition to an exponentially suppressed positive cosmological constant. Finally, we argue that these scenarios can be realized in terms of a generalization of a small resolution of a conifold singularity in the context of a (Lorentzian) Calabi–Yau 5-fold, where the isolated (Lorentzian) two complex dimensional Fano variety is a four-dimensional de Sitter spacetime.

79 ASTRONOMY AND ASTROPHYSICS↗

Preliminary summary of the ETF conceptual studies

Power plant studies have shown the attractiveness of MHD topped steam power plants for baseload utility applications. To realize these advantages, a three-phase development program was initiated. In the first phase, the engineering data and experience were developed for the design and construction of a pilot plant, the Engineering Test Facility (ETF). Results of the ETF studies are reviewed. These three parallel independent studies were conducted by industrial teams led by the AVCO Everett Research Laboratory, the General Electric Corporation, and the Westinghouse Corporation. A preliminary analysis and the status of the critical evaluation of these results are presented.

Seikel, G. R.↗

Earth rotation information derived from MERIT and POLARIS VLBI observations

Advanced methods involving observations of extraterrestrial objects, such as artificial satellites or quasars, may make it possible to monitor geometrical variations in survey networks of regional, continental, and global scale with a spatial resolution of a few centimeters and a temporal resolution of better than one day. However, in connection with a realization of this potential, it is necessary to account for variations in the orientation of the earth in space. The accuracy provided by the conventional approaches for determining the orientation of the earth is not sufficient in this case. However, an appropriate method could be based on the utilization of independent clock radio interferometry (commonly referred to as VLBI) observations of extragalactic radio sources. The project POLARIS (Polar-motion Analysis by Radio Interferometric Sampling) is concerned with an implementation of this method. The MERIT (Monitor Earth Rotation and Intercompare the Techniques of observation and analysis) observations represent an aid to project POLARIS. Attention is given to details regarding these programs and the results obtained thus far.

Robertson, D. S.↗

Order reduction in linear state estimation under performance constraints

The design and analysis of minimal-order state estimators for possibly time-varying linear systems, under constraints on the maximal allowable mean-square error, are considered. A global lower bound on the optimal error is derived, along with a lower bound on the minimal estimator order, needed for meeting the performance constraint. The ideal reduced-order estimator which satisfies the lower bound is derived, along with conditions for its realizability. When the ideal estimator is not realizable, its structure forms a suboptimal estimator, which maintains, in some sense, a local optimality property and is called the pseudoideal estimator. The mean-square error of the pseudoideal estimator defines upper bounds on the optimal error and on the estimator order needed for meeting the performance constraint. The lower and the upper bounds on the order define a reduced search set for the design problem. When the distance between the ideal and the pseudoideal estimators is sufficiently small in a certain numerical sense, the pseudoideal estimator may be considered optimal for practical purposes.

Baram, Yoram↗

Space Resources Roundtable 2

Contents include following: Developing Technologies for Space Resource Utilization - Concept for a Planetary Engineering Research Institute. Results of a Conceptual Systems Analysis of Systems for 200 m Deep Sampling of the Martian Subsurface. The Role of Near-Earth Asteroids in Long-Term Platinum Supply. Core Drilling for Extra-Terrestrial Mining. Recommendations by the "LSP and Manufacturing" Group to the NSF-NASA Workshop on Autonomous Construction and Manufacturing for Space Electrical Power Systems. Plasma Processing of Lunar and Planetary Materials. Percussive Force Magnitude in Permafrost. Summary of the Issues Regarding the Martian Subsurface Explorer. A Costing Strategy for Manufacturing in Orbit Using Extraterrestrial Resources. Mine Planning for Asteroid Orebodies. Organic-based Dissolution of Silicates: A New Approach to Element Extraction from LunarRegohth. Historic Frontier Processes Active in Future Space-based Mineral Extraction. The Near-Earth Space Surveillance (NIESS) Mission: Discovery, Tracking, and Characterization of Asteroids, Comets, and Artificial Satellites with a microsatellite. Privatized Space Resource Property Ownership. The Fabrication of Silicon Solar Cells on the Moon Using In-Situ Resources. A New Strategy for Exploration Technology Development: The Human Exploration and Development of Space (HEDS) Exploratiori/Commercialization Technology Initiative. Space Resources for Space Tourism. Recovery of Volatiles from the Moon and Associated Issues. Preliminary Analysis of a Small Robot for Martian Regolith Excavation. The Registration of Space-based Property. Continuous Processing with Mars Gases. Drilling and Logging in Space; An Oil-Well Perspective. LORPEX for Power Surges: Drilling, Rock Crushing. An End-To-End Near-Earth Asteroid Resource Exploitation Plan. An Engineering and Cost Model for Human Space Settlement Architectures: Focus on Space Hotels and Moon/Mars Exploration. The Development and Realization of a Silicon-60-based Economy in CisLunar Space. Our Lunar Destiny: Creating a Lunar Economy. Cost-Effective Approaches to Lunar Passenger Transportation. Lunar Mineral Resources: Extraction and Application. Space Resources Development - The Link Between Human Exploration and the Long-term Commercialization of Space. Toward a More Comprehensive Evaluation of Space Information. Development of Metal Casting Molds by Sol-Gel Technology Using Planetary Resources. A New Concept in Planetary Exploration: ISRU with Power Bursts. Bold Space Ventures Require Fervent Public Support. Hot-pressed Iron from Lunar Soil. The Lunar Dust Problem: A Possible Remedy. Considerations on Use of Lunar Regolith in Lunar Constructions. Experimental Study on Water Production by Hydrogen Reduction of Lunar Soil Simulant in a Fixed Bed Reactor.

Ignatiev, A.↗

Process Design and Economics for the Conversion of Lignocellulosic Biomass to Hydrocarbons via Indirect Liquefaction. Thermochemical Research Pathway to High-Octane Gasoline Blendstock Through Methanol/Dimethyl Ether Intermediates

This report was developed as part of the U.S. Department of Energy’s Bioenergy Technologies Office’s (BETO’s) efforts to enable the development of technologies for the production of infrastructure-compatible, cost-competitive liquid hydrocarbon fuels from lignocellulosic biomass feedstocks. The research funded by BETO is designed to advance the state of technology of biomass feedstock supply and logistics, conversion, and overall system sustainability. It is expected that these research improvements will be made within the 2022 timeframe. As part of their involvement in this research and development effort, the National Renewable Energy Laboratory and the Pacific Northwest National Laboratory investigate the economics of conversion pathways through the development of conceptual biorefinery process models and techno-economic analysis models. This report describes in detail one potential conversion process for the production of high-octane gasoline blendstock via indirect liquefaction of biomass. The processing steps of this pathway include the conversion of biomass to synthesis gas or syngas via indirect gasification, gas cleanup, catalytic conversion of syngas to methanol intermediate, methanol dehydration to dimethyl ether (DME), and catalytic conversion of DME to high-octane, gasoline-range hydrocarbon blendstock product. The conversion process configuration leverages technologies previously advanced by research funded by BETO and demonstrated in 2012 with the production of mixed alcohols from biomass. Biomass-derived syngas cleanup via reforming of tars and other hydrocarbons is one of the key technology advancements realized as part of this prior research and 2012 demonstrations. The process described in this report evaluates a new technology area for the downstream utilization of clean biomass-derived syngas for the production of high-octane hydrocarbon products through methanol and DME intermediates. In this process, methanol undergoes dehydration to DME, which is subsequently converted via homologation reactions to high-octane, gasoline-range hydrocarbon products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Thermal Collector With Varied Glass Covers

The thermal collector with varied glass covers represents an innovation realized in order to build a collector able to reach the desired temperature by collecting the solar radiation from the smallest surface, with the highest efficiency. In the case of the thermal collector with variable cover glasses, the number of the glass plates covering the absorber increases together with the length of the circulation pipe for the working fluid. The thermal collector with varied glass covers compared to the conventional collector better meet user requirements because: for the same temperature increase, has the collecting area smaller; for the same collection area, realizes the highest temperature increase and has the highest efficiency. This works is addressed to researchers in the solar energy and to engineers responsible with air-conditioning systems design or industrial and agricultural products drying.

14 SOLAR ENERGY↗