Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECYCLABLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Xenon Recovery at Room Temperature using Metal-Organic Frameworks

Xenon is known to be a very efficient anesthetic gas but its cost prohibits the wider use in medical industry and other potential applications. It has been shown that Xe recovery and recycle from anesthetic gas mixture can significantly reduce its cost as anesthetic. The current technology uses series of adsorbent columns followed by low temperature distillation to recover Xe, which is expensive to use in medical facilities. Herein, we propose much efficient and simpler system to recover and recycle Xe from simulant exhale anesthetic gas mixture at room temperature using metal organic frameworks. Among the MOFs tested, PCN-12 exhibits unprecedented performance with high Xe capacity, Xe/N2 and Xe/O2 selectivity at room temperature. The in-situ synchrotron measurements suggest the Xe is occupied in the small pockets of PCN-12 compared to unsaturated metal centers (UMCs). Computational modeling of adsorption further supports our experimental observation of Xe binding sites in PCN-12.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Life cycle analysis of gasification and Fischer-Tropsch conversion of municipal solid waste for transportation fuel production

Non-recyclable municipal solid waste (MSW) can be used as feedstock for liquid fuel production via gasification followed by Fischer-Tropsch (FT) processes. Given the heterogeneity of MSW material composition and variation in material properties, its convertibility to liquid hydrocarbon fuels could vary widely, affecting the sustainability of utilizing non-recyclable MSW for fuel production. This study evaluates the life cycle greenhouse gas (GHG) emissions (carbon intensities [CIs]) of FT fuels from non-recyclable MSW. Key issues that could greatly affect the CIs were examined, including fossil carbon content of the MSW, emission implications of diverting non-recyclable MSW from landfills to fuel production, and conversion efficiency. Results show that the CIs of fuels produced from various waste streams range 80–105 gCO2e/MJ, which may exceed the CI of petroleum fuels. Higher fossil carbon content in the MSW feedstock tends to incur higher GHG emissions as biogenic carbon emissions are considered carbon neutral. Meanwhile, diverting different fractions of non-recyclable MSW, such as food waste and low-quality paper, from landfills may result in GHG emissions that may include the potential avoidance of methane emissions and potential sequestration of biogenic carbon that is foregone. To reduce GHG emissions, a carbon capture and sequestration option in the fuel production stage is considered, which could reduce the CI by 53–64 gCO2e/MJ. Carbon fates of different non-recyclable MSW in landfills are further evaluated to determine how they vary and impact the CIs of MSW-derived fuels.

02 PETROLEUM↗

Solvent-mediated contaminant removal from plastic waste using thermodynamic modeling

Plastics recycling is hindered by the compositional complexity of plastic waste, which can include numerous polymer components as well as low concentrations of additives and non-intentionally added substances. These latter small-molecule species, which we collectively refer to as contaminants, can harm human health and will build up in recycled plastic causing environmental and downstream processing challenges if not removed. In this work, we present molecular modeling approaches using the COnductor-like Screening MOdel for Real Solvents (COSMO-RS) to guide the selection of solvents that are capable of removing targeted contaminants from plastic waste. By considering the thermodynamic partitioning of contaminant species between a solvent phase and polymer phase, we identify guidelines for solvent selection to promote either the low-temperature extraction of contaminants from plastic waste or the removal of contaminants as part of a dissolution-based plastics recycling process. We present four case studies to illustrate the application of the computational approach to the removal of brominated flame retardants, phthalates, and selected perfluoroalkyl substances, and compare to both literature and newly collected experimental data to illustrate model prediction accuracy. Furthermore, the case studies highlight the capability of the modeling approach to help design recycling processes that explicitly account for contaminant removal, thereby increasing product purity during dissolution-based recycling or facilitating chemical recycling of contaminant-free plastics.

Zhou, Panzheng [University of, Wisconsin, Madison,↗

Thorium Fuel Cycle Option Screening in the United States

As part of a nuclear fuel cycle Evaluation and Screening (E&S) study, a wide-range of thorium fuel cycle options were evaluated and their performance characteristics and challenges to implementation were compared to those of other nuclear fuel cycle options based on criteria specified by the Nuclear Energy Office of the U.S. Department of Energy (DOE). The evaluated nuclear fuel cycles included the once-through, limited, and continuous recycle options using critical or externally-driven nuclear energy systems. The E&S study found that the continuous recycle of 233U/Th in fuel cycles using either thermal or fast reactors is an attractive promising fuel cycle option with high effective fuel resource utilization and low waste generation, but did not perform quite as well as the continuous recycle of Pu/U using a fast critical system, which was identified as one of the most promising fuel cycle options in the E&S study. This is because compared to their uranium counterparts the thorium-based systems tended to have higher radioactivity in the short term (about 100 years post irradiation) because of differences in the fission product yield curves, and in the long term (100,000 years post irradiation) because of the decay of 233U and daughters, and because of higher mass flow rates due to lower discharge burnups. Some of the thorium-based systems also require enriched uranium support, which tends to be detrimental to resource utilization and waste generation metrics. Finally, similar to the need for developing recycle fuel fabrication, fuels separations and fast reactors for the most promising options using Pu/U recycle, the future thorium-based fuel cycle options with continuous recycle would also require such capabilities, although their deployment challenges are expected to be higher since such facilities have not been developed in the past to a comparable level of maturity for Th-based systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phase 1 Testing Results of Immobilization of WTP Effluent Management Facility Evaporator Bottoms Core Simulant

The Hanford Waste Treatment and Immobilization Plant (WTP) Low Activity Waste (LAW) vitrification facility will generate an aqueous condensate recycle stream (LAW Melter Off-Gas Condensate) from the off-gas system. The baseline plan for disposition of this stream during full WTP operations is to send it to the WTP Pretreatment Facility, where it will be blended with LAW, concentrated by evaporation and recycled to the LAW vitrification facility. However, during the Direct Feed LAW (DFLAW) scenario, planned disposition of this stream is to evaporate it in a new evaporator in the Effluent Management Facility (EMF) and then return it to the LAW melter. It is important to understand the composition of the effluents from the melter and new evaporator so that the disposition of these streams can be accurately planned and accommodated. Furthermore, alternate disposition of this stream would eliminate recycling of problematic components, and would enable less integrated operation of the LAW melter and the Pretreatment Facilities. Alternate disposition would also eliminate this stream from recycling within WTP when it begins operations and would decrease the LAW vitrification mission duration and quantity of glass waste. This LAW Melter Off-Gas Condensate stream will contain components that are volatile at melter temperatures and are problematic for the glass waste form, such as halides and sulfate, along with entrained, volatile, and semi-volatile metals, such as Hg, As, and Se. Because this stream will recycle within WTP, these components accumulate in the Melter Condensate stream, exacerbating their impact on the number of LAW glass containers that must be produced. Diverting the stream reduces the halides and sulfate that get recycled to the melter, and is a key objective of this work. This overall program examines the potential treatment and immobilization of this stream to enable alternative disposal. The objective of earlier tasks was to formulate and prepare a simulant of the LAW Melter Off-gas Condensate expected during DFLAW operations and use it in evaporator testing to predict the composition of the effluents from the Effluent Management Facility (EMF) evaporator to aid in planning for their disposition. The objective of this task was to test immobilization options for this evaporator bottoms aqueous stream. This document describes the method used to formulate a simulant of this EMF evaporator bottoms stream, immobilize it, and determine if the immobilized waste forms meet disposal criteria.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cost Competitive Process of Battery Grade Oxides Preparation from Aged LIBS

The increasing demand for lithium-ion batteries (LIBs) is driving development of advanced recycling and refining methods. In this project, new cathode active materials are prepared from recycled lithium battery materials and subsequently electrochemically evaluated in coin cells. In detail, scrap LIBs were mechanically processed into a metal rich black mass, then reductive acid leached into an aqueous metal solution, and finally high-purity metal hydroxide precursor materials were prepared by selective electrochemical flow precipitation. Closed-loop LIB recycling into active electrode materials will enable US manufacturers to break their reliance on foreign sources of critical materials. For example, electroextraction process used here has potential to significantly reduce chemical & water use as compared to traditional metallurgic techniques. To this end, electroextracted materials refined from used batteries were collected and processed to be tested as precursor cathode active material (pCam). During this project , samples of high-purity recycled NMC hydroxide (~2 kg each) were received from Nth Cycle. In the first received batch some impurities like cadmium, calcium, and sodium are present in quantities that would negatively impact battery performance. Nth Cycle indicated that the impurities such as cadmium are present due to poor battery separation and co-shredding of NiCd batteries with with LIB. Cadmium was not present in the two subsequent batches as Nth Cycle processed cadmium free black mass. Thus, effective recycled battery sorting is critical to closed-loop LIB recycling into active electrode materials.

25 ENERGY STORAGE↗

Life Support Goals Including High Closure and Low Mass Should Be Reconsidered Using Systems Analysis

Recycling space life support systems have been built and tested since the 1960s and have operated on the International Space Station (ISS) since the mid 2000s. The development of space life support has been guided by a general consensus focused on two important related goals, increasing system closure and reducing launch mass. High closure is achieved by recycling crew waste products such as carbon dioxide and condensed humidity. Recycling directly reduces the mass of oxygen and water for the crew that must be launched from Earth. The launch mass of life support can be further reduced by developing recycling systems with lower hardware mass and reduced power. The life support consensus has also favored using biological systems. The goal of increasing closure using biological systems suggests that food should be grown in space and that biological processors be used for air, water, and waste recycling. The goal of reducing launch mass led to use of Equivalent System Mass (ESM) in life support advocacy and technology selection. The recent consensus assumes that the recycling systems architecture developed in the 1960s and implemented on ISS will be used on all future long missions. NASA and other project organizations use the standard systems engineering process to guide hardware development. The systems process was used to develop ISS life support, but it has been less emphasized in planning future systems for the moon and Mars. Since such missions are far in the future, there has been less immediate need for systems engineering analysis to consider trade-offs, reliability, and Life Cycle Cost (LCC). Preliminary systems analysis suggests that the life support consensus concepts should be revised to reflect systems engineering requirements.

systems analysis↗

Oxidation and Extraction of Americium(VI) from Lanthanides

Partitioning and transmutation of americium and curium has been the subject of significant research in the nuclear fuel cycle over the past two decades. Numerous approaches have been studied to separate these elements from the lanthanide elements to enable their recycle and transmutation. Americium is one of the primary long-term heat sources in used nuclear fuel, which may impact repository loading. The lanthanides are both a) neutron poisons, reducing reactor performance, if recycled, and b) can chemically interact with fuel cladding to cause early failure, if present in sufficient concentration. Chemical separation approaches for heterogeneous fuel recycle, typically utilize proven technology (PUREX or modifications to the PUREX process) to remove uranium and plutonium from the dissolved fuel (and if desired, can remove neptunium as well). Follow-on processing is then required to separate the americium and curium, or the americium alone (for target fabrication). In a homogeneous recycle approach, the bulk of the uranium is typically separated first, followed by additional processing to remove the transuranic elements as a group. Because of the chemical similarity of the americium with the lanthanides, and particularly with curium, these separate processes are difficult. Utilizing the unique valence states of americium (primarily the (VI) oxidation state), opens up new opportunities for the separation of americium for either heterogeneous recycle (enabling americium separation alone) or homogeneous recycle (separating americium together with plutonium and neptunium). The US Department of Energy Fuel Cycle Technologies program has been researching methods to oxidize americium and to extract it from lanthanides as americium(VI), preferably from molar nitric acid solutions. Early efforts identified sodium bismuthate as an effective oxidant, which enabled testing of the extraction of americium(VI) by tributyl phosphate and diamylamylphosphonate. Successful extraction of americium(VI) was demonstrated in this system, in both batch contact laboratory tests and in centrifugal contactors; however, the sodium bismuthate is a solid, and must be in excess of saturation with the solution. This creates some engineering challenges in the process. A significant effort to identify alternative oxidants has led to a number of promising approaches. Silver-catalyzed ozone, copper(III) periodate, and electrochemical oxidation of americium from the trivalent to hexavalent state have all been successfully demonstrated in laboratory experiments. These approaches would enable oxidation and extraction of americium without having to filter solids. Once the americium is oxidized, a key issue is how long it will remain in the hexavalent state. Investigations have shown that some materials of construction (e.g., tantalum) do not reduce americium as quickly as stainless steel. Also, alternative extractants, such as amides, do not appear to reduce the americium as rapidly as the phosphate or phosphonate extractants. While still early in their development, these advances in the technology offer some positive indications that a workable extraction process for the separation of americium(VI) can be realized in the near future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Systems Analysis Approach to Polyethylene Terephthalate and Olefin Plastics Supply Chains in the Circular Economy: A Review of Data Sets and Models

The environmental and economic impacts of implementing a circular economy in plastic waste supply chains are not well understood. The proposed systems analysis framework assesses environmental, social, and economic impacts of plastic waste supply chains in a circular economy. The first objective of this article is to identify datasets, models and knowledge gaps associated with waste plastic supply chain processes, mainly in the U.S. Our literature review indicated that the best datasets exist for virgin plastic resin production, mechanical recycling, landfilling, and incineration, with materials recovery facility being intermediate, and with chemical recycling the lowest. The second objective of this article is to develop an illustrative application of the framework by conducting a preliminary systems analysis of PET bottles with closed-loop recycling. Here, the preliminary systems analysis of PET bottles utilized a linear programming optimization method. Our optimization model indicated that both chemical and mechanical recycling processes are needed to achieve a true circular economy of PET bottles with the least greenhouse gas emissions, specifically reductions of 24% when compared with the linear economy. Good quality and standardized life cycle assessment and techno-economic analysis studies are needed to better understand the environmental, economic, and social impacts of advanced sorting and chemical recycling technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of metallic contaminants on the electrochemical and thermal behavior of Li-ion electrodes

Emerging nondestructive (direct) recycling techniques for lithium-ion batteries may introduce metallic impurities into recycled electrodes. In the present work, the impact of such nonionic contaminants on the practical performance of both anode and cathode materials is evaluated using a synergistic combination of electrochemical and thermal analysis. The impurities under study have been selected through evaluation of industrially shredded batteries, and include Fe0, Al0, Mg0, Cu0, and Si0. The electrochemical behavior of materials containing each individual contaminant at either the anode or the cathode is evaluated in both half-cell and full-cell format. Further, the first-cycle thermal signatures of full cells are used to validate and complement electrochemical signatures, and the two techniques are used in conjunction to suggest distinct mechanisms of electrochemical reactivity for the various impurities. At the anode, metallic contaminants are found to disrupt performance through direct reaction with Li and may serve as weak catalysts to accelerate electrolyte degradation. At the cathode, metallic contaminants show evidence of crossover during formation cycling to disrupt SEI formation. We suggest that coupled electrochemical and thermal analysis may be used to both identify the presence of contaminants and to elucidate specific mechanisms of reactivity for metallic impurities under anodic and cathodic conditions.

Contaminant↗

Cost‐Effective and Scalable Approach for the Separation and Direct Cathode Recovery from End‐of‐Life Li‐Ion Batteries

Li-ion battery recycling presents a promising opportunity to decrease dependence on foreign sources of materials and harvest precious materials within the United States. Herein, a superior complete direct recycling process on individual end-of-life cells is reported where the recovered high-purity cathode active material, as well as electrolyte salt Li hexafluorophosphate (LiPF 6 ) can be reused without significant processing. This new process utilizes a series of mechanical separation steps that enable the separation of the cathode and anode active materials while they are still attached to their current collectors. Using this type of process can significantly reduce metal contamination and enable a clean cathode that can be directly recycled. The process if implemented commercially can greatly reduce the environmental burden of batteries as the greenhouse gas emissions of 8.25 kg CO 2 e kg −1 from the direct recycling process are 64% lower compared to those from virgin production of cathode material. During electrochemical testing of the recovered LiNi 0.6 Mn 0.2 Co 0.2 O 2 a discharge capacity of ≈160 mAh g −1 and good cyclability of over 250 cycles at 0.33C are achieved. This success paves a new pathway to explore and optimize existing Li-ion battery recycling procedures.

electrolyte reuse↗

Addressing Inherent Challenges to Chemical Relithiation of Cycled End‐of‐Life Cathode Materials

Recycling end‐of‐life (EOL) lithium‐ion batteries (LIBs) is important to retain valuable resources from critical materials present in EOL battery waste. Direct recycling methods offer an opportunity to recover intact valuable cathode materials with minimal re‐processing. An important step of the direct recycling process is relithiation which is used to restore lithium content to EOL cathode materials. However, little has been done to study how preprocessing steps such as washing or binder removal may affect relithiation methods in the direct recycling process. Here, the evolution of fluorine byproducts left over from preprocessing steps during a low‐temperature chemical redox mediator relithiation process is tracked. A facile washing step is presented as a solution for mediating adverse effects of surface contamination on the chemical relithiation performance. The structure, lithium content, and electrochemical performance of relithiated EOL NMC 622 material that underwent a pre‐relithiation washing step to remove fluorine byproducts is shown to match that of pristine NMC 622. In this work, it is showed that redox mediator relithiation as a part of a direct recycling process is a promising low energy method that can be applied to EOL material with inherent surface impurities if the proper pre‐relithiation processing steps are implemented.

25 ENERGY STORAGE↗

Carbonation and CO{sub 2} uptake of concrete

This study developed a reliable procedure to assess the carbon dioxide (CO{sub 2}) uptake of concrete by carbonation during the service life of a structure and by the recycling of concrete after demolition. To generalize the amount of absorbable CO{sub 2} per unit volume of concrete, the molar concentration of carbonatable constituents in hardened cement paste was simplified as a function of the unit content of cement, and the degree of hydration of the cement paste was formulated as a function of the water-to-cement ratio. The contribution of the relative humidity, type of finishing material for the concrete surface, and the substitution level of supplementary cementitious materials to the CO{sub 2} diffusion coefficient in concrete was reflected using various correction factors. The following parameters varying with the recycling scenario were also considered: the carbonatable surface area of concrete crusher-runs and underground phenomena of the decreased CO{sub 2} diffusion coefficient and increased CO{sub 2} concentration. Based on the developed procedure, a case study was conducted for an apartment building with a principal wall system and an office building with a Rahmen system, with the aim of examining the CO{sub 2} uptake of each structural element under different exposure environments during the service life and recycling of the building. As input data necessary for the case study, data collected from actual surveys conducted in 2012 in South Korea were used, which included data on the surrounding environments, lifecycle inventory database, life expectancy of structures, and recycling activity scenario. Ultimately, the CO{sub 2} uptake of concrete during a 100-year lifecycle (life expectancy of 40 years and recycling span of 60 years) was estimated to be 15.5%–17% of the CO{sub 2} emissions from concrete production, which roughly corresponds to 18%–21% of the CO{sub 2} emissions from the production of ordinary Portland cement. - Highlights: • CO{sub 2} uptake assessment approach owing to the concrete carbonation is developed. • An equation to directly determine the absorbable CO{sub 2} amount in concrete is proposed. • The carbonatable surface area of concrete crusher-runs for CO{sub 2} uptake is ascertained. • This study provides typical data for uptake and emission of CO{sub 2} in concrete building.

54 ENVIRONMENTAL SCIENCES↗

Cradle-to-gate life cycle assessment of advanced composite panels incorporating CO 2 -derived multi-walled carbon nanotubes and hemp fiber for sustainable building applications

Advanced composite panels represent a promising pathway to reducing carbon emissions in the construction industry, yet comprehensive environmental impact assessments remain limited. Here, in this study, we conduct a life cycle assessment (LCA) to evaluate the environmental impacts of innovative composite panels produced from multi-walled carbon nanotubes (MWCNTs), hemp fiber (HF), recycled carbon fiber (rCF), and recycled polypropylene (PP), exploring their potential as baseline structural equivalents to conventional gypsum board. MWCNTs and HF play a critical role in sequestering carbon during raw material production, while the recycling processes for CF and PP generally require less energy compared to virgin material production. The LCA evaluates environmental performance using the TRACI 2.1 method, covering global warming potential (GWP), ozone depletion, smog formation, acidification, eutrophication, carcinogenic and non-carcinogenic effects, respiratory impacts, ecotoxicity, and fossil fuel depletion. Compositional variations—resin type (virgin vs. recycled), rCF content (9–29 wt%), and HF content (10–30 wt%)—are introduced for sensitivity and hotspot analyses. Results demonstrate that, when compared on the basis of preliminary structural equivalence, increasing recycled PP, rCF, and HF content can significantly reduce global warming potential compared to gypsum board. Beyond carbon reduction, the composite panels show trade-offs across other environmental categories. With the growing demand for composite materials in interior panels, ceiling systems, and exterior claddings, these findings highlight the environmental benefits and potential trade-offs of the proposed composites, establishing a foundational framework to support their continued development toward full building-system integration.

Advanced composite manufacturing↗

pCAM precursor produced from electroextraction technology and its application in synthesis of NMC 811 cathode material

The synthesis and characterization of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (LNMC811) cathodes produced from recycled hydroxide precursors obtained from spent lithium-ion batteries is evaluated. Two precursor batches (Sample 1 and Sample 2) are prepared using modified recycling processes to examine how residual impurities and processing conditions influence the properties of the regenerated materials. Structural and compositional characterization by X-ray diffraction, ICP and SEM shows that the recycled precursors exhibit layered hydroxide structures containing both α Ni(OH) 2 and β Ni(OH) 2 phases. Trace impurities including sodium, boron, and aluminum are detected and partially mitigated during processing, with boron found to play a beneficial role in electrochemical behavior. Following lithiation with lithium carbonate and lithium hydroxide at 800 °C under an oxygen rich atmosphere, the resulting LNMC811 materials show electrochemical performance comparable to conventionally synthesized cathodes. Sample 2, which contains higher boron levels and improved cation ordering, delivers an initial discharge capacity of 174 mAh g -1 and retains more than 93 percent of its capacity after 50 cycles. The stable cycling behavior and structural integrity of these materials demonstrate that recycled precursors can be converted into high performance layered cathodes and support recycling as a practical and sustainable route for lithium-ion battery manufacturing.

25 ENERGY STORAGE↗

Impact of nitrogen molecular breakup on divertor conditions in JET L-mode plasmas using SOLPS-ITER

SOLPS-ITER simulations of nitrogen-seeded, low-confinement mode plasmas in the Joint European Torus (JET) predict that the electron temperature in the low-field side (LFS) divertor leg is reduced locally by up to an order of magnitude when nitrogen is assumed to recycle as molecules (N 2 ) instead of atoms using a fixed nitrogen injection rate. The LFS divertor temperature reduction under the assumption of molecular recycling occurs due to a three-step mechanism: (1) the plasma penetration of nitrogen atoms is increased due to the strong triple bond of the N 2 molecule and the kinetic energy release in the dissociation event, both mechanisms contributing equally, (2) the abundance of (particularly multiply-charged) nitrogen ions in the divertor is increased and (3) the electron temperature is reduced due to the increase in radiation (by up to a factor of 4) from nitrogen ions. Setting the volume-integrated nitrogen radiated power to a constant value (0.6 MW) instead of the nitrogen injection rate, SOLPS-ITER predicts under the molecular nitrogen recycling assumption that the peak line-integrated N II, N III and N IV intensities in the LFS divertor are approximately within 15%, 35% and 5%, respectively, of the reference atomic nitrogen recycling case. The predicted peak N II, N III and N IV intensities under either assumption are within 30%, 65% and 5%, respectively, of measurements using the vertically viewing mirror-link divertor spectrometer (Meigs et al., 2010) in nitrogen-seeded JET L-mode plasmas (Lomanowski et al., 2019). ERO2.0 simulations using a constant nitrogen seeding rate on static background plasma solutions from EDGE2D-EIRENE (previously presented in Mäenpää et al., (2022), revised here to include fast reflections) predict that N II to N IV line emission is increased by 20% to 30% when nitrogen is assumed to recycle as molecules, demonstrating the importance of considering the effect of molecular dissociation reactions on the divertor plasma in a self-consistent manner.

Divertor↗

Environmental and socio-economic Pareto-front trade-off analysis of U.S. PET packaging material in a circular economy

Various recycling technologies are emerging to implement circular economy in plasticssupply chain systems. However, the environmental and socio-economic trade-offs of in circular economy are not well understood at a systems level. Particularly, quantifying these trade-offs as a function of end-of-life (EOL) management decisions, including transition of recycling technologies, systems level metrics such as circularity, recycled content, and the need for fossil-derived plastics are not well understood. Here, the present study addressed these research gaps by applying a systems analysis modeling approach that utilizes material flow analysis, life cycle assessment, socioeconomic data, and system optimization techniques for polyethylene terephthalate (PET) packaging supply chains in the United States. Pareto-front trade-offs between conflicting environmental and socio-economic impacts as well as those between socioeconomic impacts and circularity were explored using the epsilon constraint method. The Pareto-front trade-off analysis revealed the transition of EOL management strategies for PET packaging systems, including changes in selection of recycling technologies, to aid decision making process by quantifying studied system metrics. Transitioning from environmentally optimal to socio-economically optimal systems led to increased employment (by 17%), wages (by 26%), and revenues (by 6%) but also led to increased global warming potential (GWP; by 65%), energy consumption (by 59%), and reliance on fossil PET in the system (by 78%). Finally, the results show that there is not a unique set of recycling technologies to achieve a sustainable circular economy of PET packaging system, instead it depends on the decision maker’s objectives and targeted metrics of the system.

54 - ENVIRONMENTAL SCIENCES/GLOBAL CLIMATE CHANGE ↗

Using a contingent valuation approach for improved solid waste management facility: Evidence from Kuala Lumpur, Malaysia

This study employed contingent valuation method to estimate the willingness to pay (WTP) of the households to improve the waste collection system in Kuala Lumpur, Malaysia. The objective of this study is to evaluate how household WTP changes when recycling and waste separation at source is made mandatory. The methodology consisted of asking people directly about their WTP for an additional waste collection service charge to cover the costs of a new waste management project. The new waste management project consisted of two versions: version A (recycling and waste separation is mandatory) and version B (recycling and waste separation is not mandatory). The households declined their WTP for version A when they were asked to separate the waste at source although all the facilities would be given to them for waste separation. The result of this study indicates that the households were not conscious about the benefits of recycling and waste separation. Concerted efforts should be taken to raise environmental consciousness of the households through education and more publicity regarding waste separation, reducing and recycling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗