Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTROSCOPY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Pressure-tuned plethora of ferroelectric phases in CuInP 2 S 6

Layered chalcogenides like CuInP 2 S 6 are room temperature ferroelectrics. Modest compression even increases the electric polarization, raising questions about the origin of this unusual trend and other properties under pressure. In this work, we combine synchrotron-based infrared and Raman scattering spectroscopies, x-ray diffraction, and resistivity measurements with first-principles calculations of the lattice dynamics and energy landscape to unravel the influence of pressure on symmetry, polarization, and metallicity. We uncover a remarkable series of phase transitions across a series of polar space groups: monoclinic Cc → trigonal P31c (prismatic sulfur) → P31c (octahedral sulfur). True metallicity develops above 63 GPa, significantly higher than in related MPS 3 materials (M = Mn, Co, Fe, Ni), offering a picture of competing states of matter that is different than previously supposed. Detailed examination of pressure trends within the Cc phase also reveals phonon lifetime changes and streaking of satellite x-ray peaks that correlate with the maximum polarization. We discuss these tendencies in terms of Cu + ion migration, phase formation, and the overall energy landscape. Our findings place the high pressure behavior of CuInP 2 S 6 on a firm foundation and pave the way for the development of structure-property relations in this family of complex chalcogenides.

ferroelectric phases↗
DOE OSTI2022

Quantum critical fluctuations in an Fe-based superconductor

Abstract Quantum critical fluctuations may prove to play an instrumental role in the formation of unconventional superconductivity. Here, we show that the characteristic scaling of a marginal Fermi liquid is present in inelastic light scattering data of an Fe-based superconductor tuned through a quantum critical point (QCP) by chemical substitution or doping. From the doping dependence of the imaginary time dynamics we are able to distinguish regions dominated by quantum critical behavior from those having classical critical responses. This dichotomy reveals a connection between the marginal Fermi liquid behavior and quantum criticality. In particular, the overlap between regions of high superconducting transition temperatures and quantum critical scaling suggests a contribution from quantum fluctuations to the formation of superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

CO 2 -assisted ethane oxidative dehydrogenation over MoO x catalysts supported on reducible CeO 2 –TiO 2

Supported MoO x on mixed CeO 2 –TiO 2 was investigated for the oxidative dehydrogenation of ethane (ODHE) using CO 2 as a mild oxidant. Raman spectroscopic characterization of the synthesized catalysts under dehydrated conditions suggested that surface MoO x species prefer to anchor on the crystalline domains of TiO 2 . Upon increasing the amount of CeO 2 in the mixed oxide support, significant spectral changes were observed, especially in the ~900–950 cm –1 region where Mo–O–M bonds are expected. The catalytic behaviors of Mo as opposed to pure support materials were distinct. As the ceria content in the support increased, MoO x catalysts promoted oxidative dehydrogenation pathways via the Mars–van Krevelen mechanism, while pure supports appeared to favor ethane direct dehydrogenation. Investigation of structure–function relationships via in situ Raman spectroscopic efforts revealed that adding ceria not only changed the redox properties of the support but also improved those of the deposited amorphous MoO x species. We also show that upon incorporation of ceria into the support, CO 2 directly participates in the reoxidation of the dispersed MoO x species during catalysis. Here, this effect was distinct from the participation of CO 2 in the reverse water gas shift reaction. Operando Raman spectra revealed that the presence of CO 2 prolonged the existence of the 930 cm –1 feature which appears to correlate well with the relative contribution of the oxidative versus non-oxidative pathway in ethane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Olefin metathesis over supported MoO x catalysts: influence of the oxide support

Here, a series of supported MoO x catalysts on different oxide supports (Al2O3, TiO2, ZrO2, SiO2) were synthesized and investigated for propylene metathesis, characterized with in situ spectroscopies (DRIFTS, Raman, UV-vis) and chemically probed with propylene-TPSR-MS, propylene-TPSR-IR, and ethylene/2-butene titration. Under dehydrated conditions at monolayer coverage or maximum surface dispersion, the surface MoO x sites are present as a mixture of isolated di-oxo (O=) 2 Mo(–O–Al) 2 and oligomeric mono-oxo O=Mo(–O–Al) 4/5 sites on Al 2 O 3 , primarily oligomeric mono-oxo O=Mo(–O–Ti) 4/5 on TiO 2 , isolated di-oxo (O=) 2 Mo(–O–Zr) 2 and oligomeric mono-oxo O=Mo(–O–Zr) 4/5 on ZrO 2 , and isolated di-oxo (O=) 2 Mo(–O–Si) 2 on SiO 2 . The bridged (S 2 -OH) and tri-coordinated (S 3 -OH) anchoring surface hydroxyls of the oxide supports with strong support cation electronegativity control the activation and number of active surface MoO x sites at low temperatures (<100 °C). The isolated anchoring surface hydroxyls (S-OH) of the oxide supports with strong support cation electronegativity control the activation and number of active surface MoO x sites at high temperatures (>350 °C). Olefin metathesis by the more redox active supported MoO x /TiO 2 and MoO x /ZrO 2 catalysts is retarded by the formation of stable surface acetone and acetate species that block olefin adsorption. The oxide supports are potent ligands that tune the activation and surface chemistry of the surface MoOx sites for olefin metathesis. This is the first time that the influence of oxide supports on the activation and surface chemistry of supported MoO x sites has been systematically examined.

02 PETROLEUM↗
DOE OSTI2024

Raman spectroscopic study of anhydrous and hydrous REE phosphates, oxides, and hydroxides

Rare earth elements (REE) include the lanthanides (La–Lu), Y, and Sc which are critical elements for the green energy transition. The REE show a decrease in ionic radii with increased atomic numbers, which results in a so-called lanthanide contraction systematically affecting crystal structures and mineral properties. Here we present a compilation of reference Raman spectra of ten REE sesquioxides (A-, B- and C-type), five REE hydroxides, eight xenotime-structured REE phosphate endmembers and two solid solutions, seven monazite-structured REE phosphate endmembers and two solid solutions and seven rhabdophane endmembers with up to five Ce 1–x LREE x rhabdophane solid solutions (LREE = La–Gd). Raman mode assignment is based on a detailed literature review summarizing existing analytical work and theoretical calculations and systematic trends observed in this study by analyzing different REE-bearing solids. Here, the wavenumbers of the main REE-O Raman band systematically increase with decreasing ionic radii forming discrete linear trends within isostructural mineral groups, that can be used to estimate the REE-O mode in other solids with known REE-O coordination numbers. Photoluminescence using 266 nm, 532 nm and 633 nm excitation laser wavelengths for REE-bearing oxides, hydroxides, anhydrous and hydrous phosphates is also presented providing a new framework for identifying REE-phases in phosphate-bearing natural mineral deposits.

58 GEOSCIENCES↗
DOE OSTI2020

Crystallization of TiO 2 polymorphs from RF-sputtered, amorphous thin-film precursors

Crystalline TiO 2 films of anatase, brookite, and rutile are reproducibly made from amorphous precursors deposited by RF magnetron sputtering, producing large-area, single phase films of uniform thickness. Sputtered amorphous TiO 2 precursor thin films follow the general behavior observed for amorphous precursor thin films generated by pulsed laser deposition, namely, that oxygen deficiency is necessary for the formation of brookite and rutile. We quantify the oxygen deficiency and correlate it with the long wavelength optical absorption. We find that the precursor deposition rate is also a contributing factor to phase selection and that brookite and rutile form from films deposited more rapidly and anatase from films deposited more slowly. Sputtered and pulsed laser deposited amorphous precursor films prepared with similar oxygen deficiency and similar thickness result in the same final state after annealing, but the rate for sputtered precursors is slower.

14 SOLAR ENERGY↗
DOE OSTI2020

Enhanced magnetization in proton irradiated Mn 3 Si 2 Te 6 van der Waals crystals

van der Waals (vdW) engineering of magnetism is a topic of increasing research interest in the community at present. We study themagnetic properties of quasi-two-dimensional layered vdW Mn 3 Si 2 Te 6 (MST) crystals upon proton irradiation as a function of fluences of 1 × 10 15 , 5 ×10 15 , 1 × 10 16 , and 1 × 10 18 H⁺/cm 2 . We find that the magnetization is significantly enhanced by 53% and 37% in the ferrimagnetic phase (at 50 K) when the MST crystal was irradiated with the proton fluence of 5 ×10 15 , both in ab and c planes, respectively.The ferrimagnetic ordering temperature and magnetic anisotropy are retained even after proton irradiation. From the fluence dependence of magnetization, electron paramagnetic resonance spectral parameters (g-value and signal width), and Raman data, we show that the magnetic exchange interactions (Mn–Te–Mn) are significantly modified at this fluence. This work shows that it is possible to employ protonirradiation in tuning the magnetic properties of vdW crystals and provide many opportunities to design desired magnetic phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Crystallography of low Z material at ultrahigh pressure: Case study on solid hydrogen

Diamond anvil cell techniques have been improved to allow access to the multimegabar ultrahigh-pressure region for exploring novel phenomena in condensed matter. However, the only way to determine crystal structures of materials above 100 GPa, namely, X-ray diffraction (XRD), especially for low Z materials, remains nontrivial in the ultrahigh-pressure region, even with the availability of brilliant synchrotron X-ray sources. In this work,we perform a systematic study, choosing hydrogen (the lowest X-ray scatterer) as the subject, to understand how to better perform XRD measurements of low Z materials at multimegabar pressures. The techniques that we have developed have been proved to be effective in measuring the crystal structure of solid hydrogen up to 254 GPa at room temperature [C. Ji et al.,Nature 573, 558–562 (2019)]. We present our discoveries and experiences with regard to several aspects of this work, namely, diamond anvil selection, sample configuration for ultrahigh-pressure XRD studies,XRD diagnostics for low Z materials, and related issues in data interpretation and pressure calibration.We believe that these methods can be readily extended to other low Z materials and can pave the way for studying the crystal structure of hydrogen at higher pressures, eventually testing structural models of metallic hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A cleanroom in a glovebox

The exploration of new materials, novel quantum phases, and devices requires ways to prepare cleaner samples with smaller feature sizes. Initially, this meant the use of a cleanroom that limits the amount and size of dust particles. However, many materials are highly sensitive to oxygen and water in the air. Furthermore, the ever-increasing demand for a quantum workforce, trained and able to use the equipment for creating and characterizing materials, calls for a dramatic reduction in the cost to create and operate such facilities. To this end, we present our cleanroom-in-a-glovebox, a system that allows for the fabrication and characterization of devices in an inert argon atmosphere. Additionally, we demonstrate the ability to perform a wide range of characterization as well as fabrication steps, without the need for a dedicated room, all in an argon environment. Finally, we discuss the custom-built antechamber attached to the back of the glovebox. This antechamber allows the glovebox to interface with ultra-high vacuum equipment such as molecular-beam epitaxy and scanning tunneling microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Low-frequency Raman spectrum of 2D layered perovskites: Local atomistic motion or superlattice modes?

We report the low-frequency Raman spectrum (ω = 10 cm -1 –150 cm -1 ) of a wide variety of alkylammonium iodide based 2D lead halide perovskites (2D LHPs) as a function of A-site cation (MA = methylammonium and FA = formamidinium), octahedral layer thickness (n = 2–4), organic spacer chain length (butyl-, pentyl-, hexyl-), and sample temperature (T = 77 K–293 K). Using density functional theory calculations under the harmonic approximation for n = 2 BA:MAPbI, we assign several longitudinal/transverse optical phonon modes between 30 cm -1 and 100 cm -1 , the eigen displacements of which are analogous to that observed previously for octahedral twists/distortions in bulk MAPbI. Additionally, we propose an alternative assignment for low-frequency modes below this band (<30 cm -1 ) as zone-folded longitudinal acoustic phonons corresponding to the periodicity of the entire layered structure. Furthermore, we compare measured spectra to predictions of the Rytov elastic continuum model for zone-folded dispersion in layered structures. Our results are consistent across the various 2D LHPs studied herein, with energetic shifts of optical phonons corresponding to microscopic structural differences between materials and energetic shifts of acoustic phonons according to changes in the periodicity and elastic properties of the perovskite/organic subphases. This study highlights the importance of both the local atomic order and the superlattice structure on the vibrational properties of layered 2D materials.

2D materials↗
DOE OSTI2021

Cryogenic operation of planar ultrananocrystalline diamond field emission source in SRF injector

Here, we report a demonstration of electron beam generation in a superconducting radio frequency (SRF) Teraelectronvolt Energy Superconducting Linear Accelerator 1.3 GHz gun equipped with a field emission cathode and operated at 2 K. The cathode is a submicrometer film of nitrogen-incorporated ultrananocrystalline diamond [(N)UNCD] deposited atop a Nb RRR300 cathode plug that is 4 mm in diameter. Measurements of the output current showed that it increased exponentially as a function of the gun gradient. Our results demonstrate a feasible path toward simplified fully cryogenic SRF injector technology. At a maximal gradient of 0.9 MV/m, a current density of 22 μA/cm2 was obtained [calculated as a 2.75 μA current over the total cathode surface area of π(2 mm)2]. One important finding is that the electron emitter made of (N)UNCD, a material long been known as a highly efficient field emission material, demonstrated a record low turn-on gradient of 0.6 MV/m. A hypothesis explaining this behavior is proposed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Diamond encapsulated silicon optical fibers synthesized by chemical vapor deposition

Semiconductor optical fibers encapsulated in a protective diamond coating can theoretically lead to immense power handling capabilities and infrared functionality. Here, silicon optical fibers are grown using high pressure chemical vapor deposition before being coated by 50 μm–300 μm of diamond by microwave plasma-assisted chemical vapor deposition. This coating extends conformally around the fiber cross section with diamond crystallites in the film on the order of several micrometers. Complete coating of high-quality diamond around the fiber is indicated by scanning electron microscopy and Raman measurements. The encapsulated silicon fibers are durable enough to survive the diamond deposition process, as demonstrated by their ability to guide infrared light.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Energy considerations regarding pulsed arc production of nanomaterials

Atmospheric arc discharge volumes have been estimated from the light distribution emitted during evaporation of graphite and molybdenum disulphide (MoS 2 ) anodes. These data have been correlated to the peak power in the case of pulsed arc discharge held at different frequencies (1, 2 and 5 Hz). The measured power density values and the corresponding specific energies per particle have been compared to DC values, and showed that pulsed arc discharges deliver electrical power more efficiently than DC arc discharges do with yet lower thermal loads. In particular, the power density of ≈1 kW/cm 3 characteristic of pulsed arcs (10-20 kW/cm 3 in DC) suffices to provide 15 eV/particle to the arc plasma (≈10 eV/particle or less in DC). Such an energy balance resulted in high ionization rates of the ablated material and production yields of carbon nanotubes around 10 11 cm -2 kWh -1 . Lastly, in situ probe experiments showed that pulsed arcs enhance the transport to substrate of the generated nanoparticles, such as graphene and MoS 2 monolayers. Pulsed anodic arcs open the possibility to generate further nanomaterials thanks to a more rational power investment and a better control of the discharge region.

42 ENGINEERING↗
DOE OSTI2020

Enhancement of the ultraviolet photoluminescence of ZnO films: Coatings, annealing, and environmental exposure studies

To realize the many potential applications of ZnO films, it is vital to produce films with high optical quality that exhibit strong UV luminescence. By combining annealing at an optimal temperature followed by the deposition of a coating, one can achieve a significant enhancement of photoluminescence (PL). The effectiveness of the coating over time is a crucial point to be considered. Three types of coating materials were investigated: MgO, SiO 2 , and Al 2 O 3 . Due to its strong bond energy, MgO was found to be the most effective coating material for passivation of the surfaces of the ZnO films; SiO 2 was the second best. The UV-PL intensity of MgO coated ZnO was found to increase by a factor of 52 relative to an uncoated film. The effectiveness of the coatings exhibited a linear correlation with their bond energies and is discussed in terms of competing mechanisms to surface passivation such as the adsorption of OH-groups; these can act as surface traps and diminish the UV-PL intensity. Annealing at 900 °C prior to the deposition of the coating was found to be an important step in realizing the optimal performance of the coating due to the reduction of Zn interstitials accompanied by improved crystallinity. Exposure to the environment, up to 294 days, results in the degradation of the UV-PL of the MgO coated film; this effect was not observed for the film coated with SiO 2 . This effect is discussed in terms of the strong reactivity of MgO with environmental contaminants from the OH-groups.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Raman studies of hydrogen trapped in As 4 O 6 ·2H 2 at high pressure and low temperature

In this work, Raman spectroscopic measurements of the arsenolite–hydrogen inclusion compound As 4 O 6 ·2H 2 were performed in diamond anvil cells at high pressure and variable temperature down to 80 K. The experimental results were complemented by ab initio molecular dynamics simulations and phonon calculations. Observation of three hydrogen vibrons in As 4 O 6 ·2H 2 is reported in the entire temperature and pressure range studied (up to 24 GPa). While the experiments performed with protium and deuterium at variable temperatures allowed for the assignment of two vibrons as Q 1 (1) and Q 1 (0) transitions of ortho and para spin isomers of hydrogen trapped in the inclusion compound, the origin of the third vibron could not be unequivocally established. Low-temperature spectra revealed that the lowest-frequency vibron is actually composed of two overlapping bands of A g and T 2g symmetries dominated by H 2 stretching modes as predicted by our previous density functional theory calculations. We observed low-frequency modes of As 4 O 6 ·2H 2 vibrations dominated by H 2 “librations,” which were missed in a previous study. A low-temperature fine structure was observed for the J = 0 → 2 and J = 1 → 3 manifolds of hydrogen trapped in As 4 O 6 ·2H 2 , indicating the lifting of degeneracy due to an anisotropic environment. A non-spherical distribution was captured by molecular dynamics simulations, which revealed that the trajectory of H 2 molecules is skewed along the crystallographic $\langle$111$\rangle$ direction. Last but not least, low-temperature synchrotron powder x-ray diffraction measurements on As 4 O 6 ·2H 2 revealed that the bulk structure of the compound is preserved down to 5 K at 1.6 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Imaging of surface acoustic waves on GaAs using 2D confocal Raman microscopy and atomic force microscopy

Surface acoustic wave devices have been fabricated on a GaAs (100) substrate to demonstrate the capability of 2D Raman microscopy as an imaging technique for acoustic waves on the surface of a piezoelectric substrate. Surface acoustic waves are generated using a two-port interdigitated transducer platform, which is modified to produce surface standing waves. We have derived an analytical model to relate Raman peak broadening to the near-surface strain field of the GaAs surface produced by the surface acoustic waves. Additionally, atomic force microscopy is used to confirm the presence of a standing acoustic wave, resolving a total vertical displacement of 3 nm at the antinode of the standing wave. Stress calculations are performed for both imaging techniques and are in good agreement, demonstrating the potential of this Raman analysis.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Raster Thomson scattering in large-scale laser plasmas produced at high repetition rate

We present optical Thomson scattering measurements of electron density and temperature in a large-scale (~2 cm) exploding laser plasma produced by irradiating a solid target with a high energy (5-10 J) laser pulse at high repetition rate (1 Hz). The Thomson scattering diagnostic matches this high repetition rate. Unlike previous work performed in single shots at much higher energies, the instrument allows point measurements anywhere inside the plasma by automatically translating the scattering volume using motorized stages as the experiment is repeated at 1 Hz. Measured densities around 4×10 16 cm -3 and temperatures around 7 eV result in a scattering parameter near unity, depending on the distance from the target. The measured spectra show the transition from collective scattering close to the target to non-collective scattering at larger distances. Densities obtained by fitting the weakly collective spectra agree to within 10% with an irradiance calibration performed via Raman scattering in nitrogen.

47 OTHER INSTRUMENTATION↗