Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Micro-Raman spectroscopic study of nanolaminated Ti{sub 5}Al{sub 2}C{sub 3}

Micro-Raman spectroscopic study and lattice dynamics calculations were conducted to study a recently identified layered ternary carbide, Ti{sub 5}Al{sub 2}C{sub 3}. The experimental Raman shifts were remarkably consistent with the calculated values. Polarized Raman spectrum was collected in the polycrystalline sample, which confirmed the theoretical symmetry assignment of the Raman modes. In addition, the atomic vibrations of the peaks at 192 cm{sup −1}, 311 cm{sup −1}, and 660 cm{sup −1} were identified to be the combination of the counterparts in Ti{sub 2}AlC and Ti{sub 3}AlC{sub 2}.

36 MATERIALS SCIENCE↗

Effect of Pr- and Nd- doping on structural, dielectric, and magnetic properties of multiferroic Bi{sub 0.8}La{sub 0.2}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}

Bi{sub 0.8}La{sub 0.15}RE{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} (where RE = Pr and Nd) have been prepared via conventional solid state route. The Rietveld refinement of X-ray diffraction patterns shows that both systems crystallize in orthorhombic Pnma space group. Raman modes observed for these two systems indicate that both systems are very close to orthorhombic Pnma structure. Appearance of prominent A{sub 1}-3 and weak E-2 modes in Bi{sub 0.8}La{sub 0.15}Nd{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} indicate the presence of chemically more active Bi-O covalent bonds (which favors stereochemical activity of Bi lone pair electrons) in comparison to Bi{sub 0.8}La{sub 0.15}Pr{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}. Moreover, Bi{sub 0.8}La{sub 0.15}Nd{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} system shows higher dielectric constant, low dielectric loss, and higher magnetization value in comparison to Bi{sub 0.8}La{sub 0.15}Pr{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} system. Ferroelectric transition temperature decreases to 460 °C for both systems in comparison to 710 °C of Bi{sub 0.8}La{sub 0.2}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}. The improved dielectric and magnetic response suggests Bi{sub 0.8}La{sub 0.15}Nd{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3} a better multiferroic system than Bi{sub 0.8}La{sub 0.15}Pr{sub 0.05}Fe{sub 0.9}Mn{sub 0.1}O{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and optical studies of CuO nanostructures

In the present study, copper oxide (CuO) nanostructures have been synthesized at 140 °C for different aging periods, 1, 24, 48 and 96 hrs by hydrothermal method to investigate their effects on structural and optical properties. The X-ray diffractometer (XRD) pattern indicates the pure phase formation of CuO and the particle size, calculated from XRD data, has been found to be increasing from 21 to 36 nm for the samples synthesized at different aging periods. Field emission scanning electron microscope (FESEM) analysis also shows that the average diameter and length of these rectangular nano flakes increases with increasing the aging periods. Moreover Raman spectrums also confirm the phase formation of CuO. The optical band gaps calculated through UV-visible spectroscopy are found to be decreasing from 2.92 to 2.69 eV with increase in aging periods, 1 to 96 hrs, respectively.

36 MATERIALS SCIENCE↗

Synthesis and Raman spectrum of crystalline indium oxide micro-rods with rectangular cross-section

Indium oxide (IO) micro-rods with rectangular cross section were synthesized without catalyst in chemical vapor deposition (CVD) system by carbothermal reduction of indium oxide at 900 °C. The rectangular micro-rods (RMRs) were grown on Si substrate in presence of water vapors and Ar atmosphere. Water was used as oxidizing reagent which controls the In/O stoichiometry in RMRs. The IO RMRs have dimensions of about 20 μm in length and about 1 μm width. The growth process involved in formation of RMRs is vapor-solid (VS) mechanism. Raman analysis was performed to obtain the phonon modes of the RMRs and the peaks of Raman spectrum were indexed to the modes being associated with bcc−In{sub 2}O{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A compact micro-wave synthesizer for transportable cold-atom interferometers

We present the realization of a compact micro-wave frequency synthesizer for an atom interferometer based on stimulated Raman transitions, applied to transportable inertial sensing. Our set-up is intended to address the hyperfine transitions of {sup 87}Rb at 6.8 GHz. The prototype is evaluated both in the time and the frequency domain by comparison with state-of-the-art frequency references developed at Laboratoire national de métrologie et d'essais−Systémes de référence temps espace (LNE-SYRTE). In free-running mode, it features a residual phase noise level of −65 dB rad{sup 2} Hz{sup −1} at 10 Hz offset frequency and a white phase noise level in the order of −120 dB rad{sup 2} Hz{sup −1} for Fourier frequencies above 10 kHz. The phase noise effect on the sensitivity of the atomic interferometer is evaluated for diverse values of cycling time, interrogation time, and Raman pulse duration. To our knowledge, the resulting contribution is well below the sensitivity of any demonstrated cold atom inertial sensors based on stimulated Raman transitions. The drastic improvement in terms of size, simplicity, and power consumption paves the way towards field and mobile operations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effects of spin doping and spin injection in the luminescence and vibrational spectrum of C{sub 60}

We have studied the Raman spectrum and photoemission of hybrid magneto-fullerene devices. For C{sub 60} layers on cobalt, the spin polarized electron transfer shifts the photoemission energy, reducing the zero phonon contribution. The total luminescence of hybrid devices can be controlled via spin injection from magnetic electrodes, with changes of the order of 10%–20% at room temperature. Spin polarised currents alter as well the Raman spectrum of the molecules, enhancing some modes by a factor 5 while shifting others by several wavenumbers due to a spin-dependent hopping time and/or enhanced intermolecular interactions. These results can be used to measure spin polarisation in molecules or to fabricate magneto-optic and magneto-vibrational devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure induced spin transition revealed by iron M{sub 2,3}-edge spectroscopy

We present a method to characterize pressure induced magnetic high to low spin transition in iron sulphide using x-ray Raman scattering spectroscopy at the iron M{sub 2,3}-edge. The advantage of this method is that the observed spectral changes between pressures of 1.7 GPa and 10.1 GPa can be used with the help of atomic multiplet calculations to determine the crystal field splitting parameters associated with the spin transition. We discuss the potential of this M{sub 2,3}-edge spectroscopy to investigate the irons electronic spin state in-situ at the conditions of the inner Earth, i.e., at high temperature and high pressure, providing exciting opportunities for geophysical and materials science applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiferroic CuCrO₂ under high pressure: In situ X-ray diffraction and Raman spectroscopic studies

The compression behavior of delafossite compound CuCrO₂ has been investigated by in situ x-ray diffraction (XRD) and Raman spectroscopic measurements up to 23.2 and 34 GPa, respectively. X-ray diffraction data show the stability of ambient rhombohedral structure up to ~23 GPa. Material shows large anisotropy in axial compression with c-axis compressibility, κ{sub c} = 1.26 × 10⁻³(1) GPa⁻¹ and a-axis compressibility, κ{sub a} = 8.90 × 10⁻³(6) GPa⁻¹. Our XRD data show an irreversible broadening of diffraction peaks. Pressure volume data when fitted to 3rd order Birch-Murnaghan equation of state give the value of bulk modulus, B₀ = 156.7(2.8) GPa with its pressure derivative, B₀{sup ’} as 5.3(0.5). All the observed vibrational modes in Raman measurements show hardening with pressure. Appearance of a new mode at ~24 GPa indicates the structural phase transition in the compound. Our XRD and Raman results indicate that CuCrO{sub 2} may be transforming to an ordered rocksalt type structure under compression.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manipulation of transport hysteresis on graphene field effect transistors with Ga ion irradiation

We have studied the effect of Ga ion irradiation on the controllable hysteretic behavior of graphene field effect transistors fabricated on Si/SO{sub 2} substrates. The various densities of defects in graphene were monitored by Raman spectrum. It was found that the Dirac point shifted to the positive gate voltage constantly, while the hysteretic behavior was enhanced first and then weakened, with the dose of ion irradiation increasing. By contrasting the trap charges density induced by dopant and the total density of effective trap charges, it demonstrated that adsorbate doping was not the decisive factor that induced the hysteretic behavior. The tunneling between the defect sites induced by ion irradiation was also an important cause for the hysteresis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of structural, electronic, vibrational, dielectric and elastic properties of tetragonal Ba₂YTaO₆

We report first-principles study of structural, electronic, vibrational, dielectric, and elastic properties of Ba₂YTaO₆, a pinning material in high temperature superconductors (HTS), by using density functional theory. By using different exchange-correlation potentials, the accuracy of the calculated lattice constants of Ba₂YTaO₆ has been achieved with GGA-RPBE, since many important physical quantities crucially depend on change in volume. We have calculated the electronic band structure dispersion, total and partial density of states to study the band gap origin and found that Ba₂YTaO₆ is an insulator with a direct band gap of 3.50 eV. From Mulliken population and charge density studies, we conclude that Ba₂YTaO₆ have a mixed ionic-covalent character. Moreover, the vibrational properties, born effective charges, and the dielectric permittivity tensor have been calculated using linear response method. Vibrational spectrum determined through our calculations agrees well with the observed Raman spectrum, and allows assignment of symmetry labels to modes. We perform a detailed analysis of the contribution of the various infrared-active modes to the static dielectric constant to explain its anisotropy, while electronic dielectric tensor of Ba₂YTaO₆ is nearly isotropic, and found that static dielectric constant is in good agreement with experimental value. The six independent elastic constants were calculated and found that tetragonal Ba₂YTaO₆ is mechanically stable. Other elastic properties, including bulk modulus, shear modulus, Young's modulus, Poisson's ratio, and elastic anisotropy ratios are also investigated and found that Poisson's ratio and Young's modulus of Ba₂YTaO₆ are similar to that of other pinning materials in HTS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Broad spectral response photodetector based on individual tin-doped CdS nanowire

High purity and tin-doped 1D CdS micro/nano-structures were synthesized by a convenient thermal evaporation method. SEM, EDS, XRD and TEM were used to examine the morphology, composition, phase structure and crystallinity of as-prepared samples. Raman spectrum was used to confirm tin doped into CdS effectively. The effect of impurity on the photoresponse properties of photodetectors made from these as-prepared pure and tin-doped CdS micro/nano-structures under excitation of light with different wavelength was investigated. Various photoconductive parameters such as responsivity, external quantum efficiency, response time and stability were analyzed to evaluate the advantage of doped nanowires and the feasibility for photodetector application. Comparison with pure CdS nanobelt, the tin-doped CdS nanowires response to broader spectral range while keep the excellect photoconductive parameters. Both trapped state induced by tin impurity and optical whispering gallery mode microcavity effect in the doped CdS nanowires contribute to the broader spectral response. The micro-photoluminescence was used to confirm the whispering gallery mode effect and deep trapped state in the doped CdS nanowires.

36 MATERIALS SCIENCE↗

Photoresponse properties of large-area MoS{sub 2} atomic layer synthesized by vapor phase deposition

Photoresponse properties of a large area MoS{sub 2} atomic layer synthesized by vapor phase deposition method without any catalyst are studied. Scanning electron microscopy, atomic force microscopy, Raman spectrum, and photoluminescence spectrum characterizations confirm that the two-dimensional microstructures of MoS{sub 2} atomic layer are of high quality. Photoelectrical results indicate that the as-prepared MoS{sub 2} devices have an excellent sensitivity and a good reproducibility as a photodetector, which is proposed to be ascribed to the potential-assisted charge separation mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic ellipsometry on Si/SiO{sub 2}/graphene tri-layer system exposed to downstream hydrogen plasma: Effects of hydrogenation and chemical sputtering

In this work, the optical response of graphene to hydrogen plasma treatment is investigated with spectroscopic ellipsometry measurements. Although the electronic transport properties and Raman spectrum of graphene change after plasma hydrogenation, ellipsometric parameters of the Si/SiO2/graphene tri-layer system do not change. This is attributed to plasma hydrogenated graphene still being electrically conductive, since the light absorption of conducting 2D materials does not depend on the electronic band structure. A change in the light transmission can only be observed when higher energy hydrogen ions (30 eV) are employed, which chemically sputter the graphene layer. An optical contrast is still apparent after sputtering due to the remaining traces of graphene and hydrocarbons on the surface. In brief, plasma treatment does not change the light transmission of graphene; and when it does, this is actually due to plasma damage rather than plasma hydrogenation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman measurements of substrate temperature in a molecular beam epitaxy growth chamber

A method is described for directly measuring the temperature of a substrate in a molecular-beam epitaxy (MBE) growth system. The approach relies on the establishment of the temperature dependence of Raman-active phonons of the substrate material using independently known calibration points across the range of interest. An unknown temperature in this range is then determined based on the Raman peak position with the substrate in situ the MBE chamber. The apparatus relies on conventional optics and Raman components. Shifting and broadening of the Raman spectrum are described based on the effects of thermal expansion and anharmonic decay. The choice of reference temperature is discussed. The method is qualified by examining the substrate temperature dependence, relative to that of a standard thermocouple, during a commonly used ramp procedure. Both temperature difference and time lag are obtained.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Strain engineering in graphene by laser irradiation

We demonstrate that the Raman spectrum of graphene on lithium niobate can be controlled locally by continuous exposure to laser irradiation. We interpret our results in terms of changes to doping and mechanical strain and show that our observations are consistent with light-induced gradual strain relaxation in the graphene layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selenium semiconductor core optical fibers

Phosphate glass-clad optical fibers containing selenium (Se) semiconductor core were fabricated using a molten core method. The cores were found to be amorphous as evidenced by X-ray diffraction and corroborated by Micro-Raman spectrum. Elemental analysis across the core/clad interface suggests that there is some diffusion of about 3 wt % oxygen in the core region. Phosphate glass-clad crystalline selenium core optical fibers were obtained by a postdrawing annealing process. A two-cm-long crystalline selenium semiconductor core optical fibers, electrically contacted to external circuitry through the fiber end facets, exhibit a three times change in conductivity between dark and illuminated states. Such crystalline selenium semiconductor core optical fibers have promising utility in optical switch and photoconductivity of optical fiber array.

36 MATERIALS SCIENCE↗

Interaction of graphene quantum dots with bulk semiconductor surfaces

Highly luminescent graphene quantum dots (GQDs) are synthesized through thermolysis of glucose. The average lateral size of the synthesized GQDs is found to be ∼5 nm. The occurrence of D and G band at 1345 and 1580 cm{sup −1} in Raman spectrum confirms the presence of graphene layers. GQDs are mostly consisting of 3 to 4 graphene layers as confirmed from the AFM measurements. Photoluminescence (PL) measurement shows a distinct broadening of the spectrum when GQDs are on the semiconducting bulk surface compared to GQDs in water. The time resolved PL measurement shows a significant shortening in PL lifetime due to the substrate interaction on GQDs compared to the GQDs in solution phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructure and magnetic properties of MFe{sub 2}O{sub 4} (M = Co, Ni, and Mn) ferrite nanocrystals prepared using colloid mill and hydrothermal method

Three kinds of spinel ferrite nanocrystals, MFe{sub 2}O{sub 4} (M = Co, Ni, and Mn), are synthesized using colloid mill and hydrothermal method. During the synthesis process, a rapid mixing and reduction of cations with sodium borohydride (NaBH{sub 4}) take place in a colloid mill then through a hydrothermal reaction, a slow oxidation and structural transformation of the spinel ferrite nanocrystals occur. The phase purity and crystal lattice parameters are estimated by X-ray diffraction studies. Scanning electron microscopy and transmission electron microscopy images show the morphology and particle size of the as-synthesized ferrite nanocrystals. Raman spectrum reveals active phonon modes at room temperature, and a shifting of the modes implies cation redistribution in the tetrahedral and octahedral sites. Magnetic measurements show that all the obtained samples exhibit higher saturation magnetization (M{sub s}). Meanwhile, experiments demonstrate that the hydrothermal reaction time has significant effects on microstructure, morphologies, and magnetic properties of the as-synthesized ferrite nanocrystals.

36 MATERIALS SCIENCE↗