Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIATION SOURCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Age Dating of SRM U050: LLNL Results

Two solutions of U050 standard (#1 and #2) were prepared at LLNL from two separate bottles of the SRM. These solutions were analyzed for 230 Th and 234 U by the methods described in the procedures supplied previously, with some modification of the Th purification procedure that will be described in our presentation. The first step is to measure the uranium concentration and isotopic composition of the primary solutions. To accomplish this, it is necessary to prepare secondary and sometimes tertiary dilutions to lower the U concentration to a range where conservative amounts of 233 U spike can be used. One two step dilution was made in January, and a replicate independent two-step dilution was made in February 2013. The results of these U concentration measurements did not agree very well, so a third set of single-step dilutions were made, spiked, and analyzed in July 2013.

07 ISOTOPE AND RADIATION SOURCES↗

Isotopic Abundances and Ratios in Arsenic Irradiated by High-Energy Neutrons

This document provides derivations of the 73 As, 74 As and 75 As isotopic abundances and ratios in an arsenic sample irradiated by high-energy (14 MeV) neutrons for 0 ≤ t ≤ T, where T is short compared to the natural decay times of the reaction products (t 1/2 ( 73 As) ~ 80.3 d, t 1/2 ( 74 As) ~ 17.8 d). The document also outlines the historic approach used to analyze arsenic data from experiments.

07 ISOTOPE AND RADIATION SOURCES↗

Advancing the Fundamental Understanding of Fission: 2014 LDRD 20120077DR Review

The following slides were presented as part of the LDRD 20120077DR Progress Appraisal Review held Tuesday, February 4, 2014. This is part of an ongoing project assessment the previous of which was documented in LA-UR-13-21182. This presentation documents the progress made against the goals agreed to as part of the 2013 review.

07 ISOTOPE AND RADIATION SOURCES↗

EP-DRAFT-1.1 2014-01-19 OSI-GAM-SOP-00x In Situ High-resolution Gamma Spectroscopy

The standard operating procedure is described for in situ high-resolution gamma spectroscopy, including operational readiness, planning, preparation, conduct, and reporting. Data analysis of in situ gamma spectrum files will be performed together with those of other gamma assay methods by a dedicated Data Analysis process, documented in companion OSI procedures.

07 ISOTOPE AND RADIATION SOURCES↗

FP-33 Final Analysis Report

This report describes an analysis of 244 Pu from VNIIEF (FP-33) sent to the Lawrence Livermore National Laboratory as test samples.

07 ISOTOPE AND RADIATION SOURCES↗

Moly99 Production Facility: Report on Beamline Components, Requirements, Costs

In FY14 we completed the design of the beam line for the linear accelerator production design concept. This design included a set of three bending magnets, quadrupole focusing magnets, and octopoles to flatten the beam on target. This design was generic and applicable to multiple different accelerators if necessary. In FY15 we built on that work to create specifications for the individual beam optic elements, including power supply requirements. This report captures the specification of beam line components with initial cost estimates for the NorthStar production facility.This report is organized as follows: The motivation of the beamline design is introduced briefly, along with renderings of the design. After that, a specific list is provided, which accounts for each beamline component, including part numbers and costs, to construct the beamline. After that, this report details the important sections of the beamline and individual components. A final summary and list of follow-on activities completes this report.

07 ISOTOPE AND RADIATION SOURCES↗

UCLA Translational Biomarker Development Program (UTBD)

The proposed UTBD program integrates the sciences of diagnostic nuclear medicine and (radio)chemistry with tumor biology and drug development. UTBD aims to translate new PET biomarkers for personalized medicine and to provide examples for the use of PET to determine pharmacokinetic (PK) and pharmacodynamic (PD) drug properties. The program builds on an existing partnership between the Ahmanson Translational Imaging Division (ATID) and the Crump Institute of Molecular Imaging (CIMI), the UCLA Department of Chemistry and the Division of Surgical Oncology. ATID provides the nuclear medicine training program, clinical and preclinical PET/CT scanners, biochemistry and biology labs for probe and drug development, radiochemistry labs, and two cyclotrons. CIMI provides DOE and NIH-funded training programs for radio-synthesis (START) and molecular imaging (SOMI). Other participating entities at UCLA are the Department of Chemistry and Biochemistry and the Division of Surgical Oncology. The first UTBD project focuses on deoxycytidine kinase, a rate-limiting enzyme in nucleotide metabolism, which is expressed in many cancers. Deoxycytidine kinase (dCK) positive tumors can be targeted uniquely by two distinct therapies: 1) nucleoside analog prodrugs such as gemcitabine (GEM) are activated by dCK to cytotoxic antimetabolites; 2) recently developed small molecule dCK inhibitors kill tumor cells by starving them of nucleotides required for DNA replication and repair. Since dCK-specific PET probes are now available, PET imaging of tumor dCK activity could improve the use of two different classes of drugs in a wide variety of cancers.

07 ISOTOPE AND RADIATION SOURCES↗

Quantification of 85 Rb, 136 Ce, 142 Nd and 150 Nd Enriched Isotope Standards

Enriched isotope standards are required for routine nuclear fuel burnup and other radiochemical analyses. In 2017 Idaho National Laboratory (INL) generated isotope standard solutions containing enriched 85 Rb, 136 Ce, 142 Nd, and 150 Nd. Oxide and chloride forms of each enriched isotope were obtained from the Oak Ridge Isotope Production program, dissolved, and quantified by isotope dilution-multi collector mass spectrometry. Quantification of the isotope solutions was performed independently by two separate laboratories at INL: the Analytical Laboratory (AL) at the Material and Fuels Complex (MFC) and the Ultra-trace Analytical Laboratory (UAL) in Idaho Falls. Concentration measurement results for all solutions and 142 Nd isotope ratio values reported by both laboratories are in quantitative agreement with each other, while isotope ratio values reported for 150 Nd are observed to have an apparent ~0.8% bias between the results of each laboratory. Data for 85 Rb/ 87 Rb isotope ratio values for UAL TIMS measurements and AL MC-ICP-MS measurements are in quantitative agreement with each other, while those of UAL MC-ICP-MS are observed to be much higher due to the existence of unidentified polyatomic interferences in the 84-88 m/z range for this instrument. Concentration and isotope ratio values for these isotope tracer solutions, along with detailed description of the analytical and data analysis methods utilized, are reported herein.

07 ISOTOPE AND RADIATION SOURCES↗

AMORE Mo-99 Spike Test Results

As a first step to produce Mo-99 in phase 2 of the Argonne Molybdenum Research Experiment (AMORE), we are performing a series of tests in which Mo-99 and natural Mo are added to a target vessel and the target solution is processed to recover Mo. This report describes a Mo-99 spike test with pH 1 sulfuric acid that was performed with an electron beam on a depleted uranium (DU) target.

07 ISOTOPE AND RADIATION SOURCES↗

Campaign 76 - Production of 252 CF and the Recovery of Curium Feed Material at the Radiochemical Engineering Development Center

Californium-252 is a strong neutron emitter with several specialized uses. It is produced in the High Flux Isotope Reactor (HFIR) by irradiating curium targets followed by several steps, collectively called a processing campaign. These steps involve chemical processing at the Radiochemical Engineering Development Center (REDC) to recover and purify Cf and Cm, and to fabricate new targets using recovered Cm. The ultimate goal of a campaign is to replenish the Cf stock for the Californium Production Program. This report describes the processing and results of Campaign 76.

07 ISOTOPE AND RADIATION SOURCES↗

American Chemical Society's summer school in nuclear and radiochemistry. Final report

The ACS Summer Schools in Nuclear and Radiochemistry (herein called “Summer Schools”) were held each year at San Jose State University (SJSU) and Brookhaven National Laboratory (BNL). The Summer Schools are an intensive, six-week program that includes both a lecture component covering fundamental principles of nuclear chemistry and radiochemistry and a laboratory component providing hands-on experience for the students to observe and test many of the basic principles that they learn about in lecture and in the special seminars. Each site hosts 12 undergraduate students annually. Participants are selected from a nation-wide pool of applicants who are currently enrolled as undergraduates seeking bachelors’ degrees, preferably in disciplines of physical sciences or engineering. To broaden the students’ perspectives on nuclear science, prominent research scientists active in nuclear and/or radiochemical research participate in a Guest Lecture Series. Symposia emphasizing nuclear security, nuclear medicine, and career opportunities are conducted as a part of the program.

07 ISOTOPE AND RADIATION SOURCES↗

Chemical Modeling of the Capture of Radioiodine Species

Iodine is a common fission product resulting from the transmutation of uranium fuel in nuclear power reactors. The short-lived radioactive isotope, 131 I, with a half-life of around eight days, would be a particular health concern if released into the environment. Capture materials, such as activated carbon, are used routinely in nuclear power plants and medical isotope production facilities to remove this hazard during normal operations to reduce emissions to acceptable levels. Iodine, unlike other common fission products such as noble gases, is challenging because of the wide range of molecular forms and oxidation states (from +VII in IF 7 to -I in iodide) that it displays, which can interconvert both in the gas phase and in the solution phase for example. The work in this project is focused on three computational tasks. In the first, we consider the binding of iodine-containing molecules of varying oxidation states to the major component of activated carbon – pristine graphene-like sheets. The second task focused on molecular binding and possible chemical transformations resulting from the reaction of molecular iodine with chemical functional groups on the edge of the graphene sheets or surface defects in the sheet itself. The final task was associated with radiolytic breakdown of 131 I to 131 Xe in iodine containing molecules and investigated the resulting molecular fragmentation process both in the gas phase and on the graphene-like surface. For each of the tasks, the intent was to learn about the thermodynamics and kinetics of the chemical transformations and use the calculations to provide parameters for input into kinetic models describing these processes for interpretation of experimental data in future work.

07 ISOTOPE AND RADIATION SOURCES↗

Development of Solid Isotope Harvesting Methods in Preparation for FRIB (Closeout Report)

This project developed the techniques necessary to isolate hydrolysable radiometals from irradiated accelerator components. It was a collaborative project headed by Dr. Jennifer Shusterman at Hunter College in coordination with Dr. Nick Scielzo at Lawrence Livermore National Laboratory and Dr. Gregory Severin at Michigan State University. To develop the methods for harvesting hydrolysable radiometals, both non-radioactive and radioactive experiments were conducted. Non-radioactive tests involved dissolving common accelerator materials (tungsten, copper, aluminum, and gold), adding trace amounts of Zr 4+ and Y 3+ , and then separating the added ions out again using a variety of column-based approaches. These methods were then tested on surrogate materials that were created by irradiating tungsten, copper, aluminum and gold foils with a low-purity 88 Zr beam at the National Superconducting Cyclotron Laboratory. The implanted 88 Zr (and co-implanted and daughter-product 88 Y) were recovered, validating the developed methods. MSU’s role in the project was to develop the chemistry for recovering Zr and Y from tungsten; build the target station for irradiating the foils; conduct the irradiations with the collaborators; to validate the tungsten methodology using the irradiated foils; and to disseminate the results.

07 ISOTOPE AND RADIATION SOURCES↗

Monte Carlo Simulations in Support of NorthStar Irradiation Facility Commissioning Procedure

NorthStar Medical Radioisotopes LLC is constructing an irradiation facility at which electron accelerators will induce photo-transmutation (i.e., neutron knockout) of molybdenum-100 (Mo-100) to produce medically useful Mo-99. The facility will house two high-intensity electron RhodotronTM accelerators developed by IBA Industrial. The nominal power of each Rhodotron is 125kW at 40 MeV beam energy. The production target is made of metallic molybdenum enriched with Mo-100 isotope. It will be irradiated by electron beams and will itself play a role in electron conversion to intense X-rays. A full description of the NorthStar target as well as the concept of radiation shielding of the facility can be found in our previous report. The NorthStar irradiation facility is under commissioning now. The goal of the present work is to support the commissioning process by: (1) Studying residual radiation and activation to minimize personnel exposure and inform radiation waste management; (2) Using computational fluid dynamics (CFD) of the irradiated target to ensure the facility design is safe and reliable; and (3) Helping to determine radiation protection requirements during operation. Monte Carlo simulations are used for the analyses. Most of the results are presented as 3D arrays representing spatial distribution of values across simulated geometries: radiation energy depositions, ambient doses, residual isotopes accumulated, and residual doses.

07 ISOTOPE AND RADIATION SOURCES↗