Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Solving implicit multi-mesh flow and conjugate heat transfer problems with RELAP-7

The fully implicit simulation capability of RELAP-7 to solve multi-mesh flow and conjugate heat transfer problems for reactor system safety analysis is presented. Compared to general single-mesh simulations, the reactor system safety analysis-type of code has unique challenges due to its highly simplified, interconnected, one-dimensional, and zero-dimensional flow network describing multiple physics with significantly different time and length scales. To use the Jacobian-free Newton Krylov-type of solver, preconditioning is generally required for the Krylov method. The uniqueness of the reactor safety analysis-type of code in treating the interconnected flow network and conjugate heat transfer also introduces challenges in providing preconditioning matrix. Typical flow and conjugate heat transfer problems involved in reactor safety analysis using RELAP-7, as well as the special treatment on the preconditioning matrix are presented in detail. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Tensile Behavior and High-Cycle Fatigue Durability of a SiC/SiC Ceramic-Matrix Composite Without and With Simulated Cooling Holes

High-cycle fatigue (HCF) behavior of a melt-infiltrated, prepreg SiC/SiC composite was investigated using specimens without and with simulated cooling holes at 816 and 1,316 °C. The ceramic-matrix composite (CMC) material used for this study was fabricated by GE Aviation and had a ply configuration of [0/90/0] 3 . HCF tests were conducted with an R-ratio of 0.6 and a cyclic frequency of 30 Hz. Maximum tensile gross-section stresses used in the HCF tests ranged from 152 to 359 MPa. Runout in HCF was defined as 30 million cycles (278 h) at both temperatures. Monotonic tensile tests were conducted at room temperature (RT) on as-received CMC specimens and on HCF runout specimens without and with holes to determine residual tensile strengths. Digital image correlation (DIC) and acoustic emission (AE) techniques were used to monitor progression of damage in RT tensile tests on specimens without and with holes. Fractography was performed on a limited number of specimens without and with holes to determine morphology of fracture surfaces. Representative RT stress-strain behavior, elevated temperature HCF behavior at the two temperatures, and RT residual tensile strengths of HCF runout specimens are documented in this report. Select examples of DIC and AE data from RT tensile tests on specimens without and with holes and typical features observed on fracture surfaces of specimens tested under tensile and HCF conditions are also discussed.

Ceramic matrix composite↗

A search for resonant production of tt pairs in 4.8 fb -1 of integrated luminosity of pp collisions at √s=1.96 TeV

We search for resonant production of tt pairs in 4.8 fb -1 integrated luminosity of pp collision data at √s = 1.96 TeV in the lepton+jets decay channel, where one top quark decays leptonically and the other hadronically. A matrix element reconstruction technique is used; for each event a probability density function (pdf) of the tt candidate invariant mass is sampled. These pdfs are used to construct a likelihood function, whereby the cross section for resonant tt production is estimated, given a hypothetical resonance mass and width. The data indicate no evidence of resonant production of tt pairs. A benchmark model of leptophobic Z' → tt is excluded with m Z' < 900 GeV at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparative analysis of quantum cascade laser modeling based on density matrices and non-equilibrium Green's functions

We study the operation of an 8.5 μm quantum cascade laser based on GaInAs/AlInAs lattice matched to InP using three different simulation models based on density matrix (DM) and non-equilibrium Green's function (NEGF) formulations. The latter advanced scheme serves as a validation for the simpler DM schemes and, at the same time, provides additional insight, such as the temperatures of the sub-band carrier distributions. We find that for the particular quantum cascade laser studied here, the behavior is well described by simple quantum mechanical estimates based on Fermi's golden rule. As a consequence, the DM model, which includes second order currents, agrees well with the NEGF results. Both these simulations are in accordance with previously reported data and a second regrown device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pair-vibrational states in the presence of neutron-proton pairing.

Pair vibrations are studied for a Hamiltonian with neutron-neutron, proton-proton and neutron-proton pairing. The spectrum is found to be rich in strongly correlated, low-lying excited states. Changing the ratio of diagonal to off-diagonal pairing matrix elements is found to have a large impact on the excited-state spectrum. The variational configuration interaction (VCI) method, used to calculate the excitation spectrum, is found to be in very good agreement with exact solutions for systems with large degeneracies having equal T=0 and T=1 pairing strengths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron microscopy studies of lutetium doped erbium silicide (Er{sub 0.9}Lu{sub 0.1}){sub 5}Si{sub 4}

Examination of bulk microstructures of lutetium doped erbium silicide (Er{sub 0.9}Lu{sub 0.1}){sub 5}Si{sub 4} (space group: Pnma) using scanning and transmission electron microscopy (SEM, TEM) reveals the existence of thin plates of a hexagonal phase (space group: P6{sub 3}/mcm) where the stoichiometric ratio in moles between the rare earths and Si is 5 to 3, i. e the 5:3 phase. The orientation relationship between the matrix and the plates was determined as [010]{sub m} {approx} -parallel [-1010]{sub p.} This observation adds credence to the assumption that all linear features noted in alloys of the rare-earth intermetallic family R{sub 5}(Si{sub x}Ge{sub 1-x}){sub 4} are of the stoichiometric ratio 5:3 and possess a common orientation relationship with the parent 5:4 alloys. - Highlights: {yields} The linear features observed in the (Er{sub 0.9}Lu{sub 0.1}){sub 5}Si{sub 4} sample are hexagonal 5:3 plates. {yields} Thickness of 5:3 plates in 5:4 alloys made by tri-arc pulling is greater than made by arc-melting. {yields} The orientation relationship between 5:3 plates and the matrix is [010]{sub m} {approx} ||[-1010]{sub p}.

36 MATERIALS SCIENCE↗

Impact of flavor-changing neutral current top quark interactions on BR(t{yields}bW)

We study the effect that flavor-changing neutral current interactions of the top quark will have on the branching ratio of charged decays of the top quark. We have performed an integrated analysis using Tevatron and B-factories data and with just the further assumption that the Cabibbo-Kobayashi-Maskawa matrix is unitary, we can obtain very restrictive bounds on the strong and electroweak flavor-changing neutral current branching ratios Br(t{yields}qX)<4.0x10{sup -4}, where X is any vector boson and a sum in q=u, c is implied.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Strong-coupling expansion for the momentum distribution of the Bose-Hubbard model with benchmarking against exact numerical results

A strong-coupling expansion for the Green's functions, self-energies, and correlation functions of the Bose-Hubbard model is developed. We illustrate the general formalism, which includes all possible (normal-phase) inhomogeneous effects in the formalism, such as disorder or a trap potential, as well as effects of thermal excitations. The expansion is then employed to calculate the momentum distribution of the bosons in the Mott phase for an infinite homogeneous periodic system at zero temperature through third order in the hopping. By using scaling theory for the critical behavior at zero momentum and at the critical value of the hopping for the Mott insulator-to-superfluid transition along with a generalization of the random-phase-approximation-like form for the momentum distribution, we are able to extrapolate the series to infinite order and produce very accurate quantitative results for the momentum distribution in a simple functional form for one, two, and three dimensions. The accuracy is better in higher dimensions and is on the order of a few percent relative error everywhere except close to the critical value of the hopping divided by the on-site repulsion. In addition, we find simple phenomenological expressions for the Mott-phase lobes in two and three dimensions which are much more accurate than the truncated strong-coupling expansions and any other analytic approximation we are aware of. The strong-coupling expansions and scaling-theory results are benchmarked against numerically exact quantum Monte Carlo simulations in two and three dimensions and against density-matrix renormalization-group calculations in one dimension. These analytic expressions will be useful for quick comparison of experimental results to theory and in many cases can bypass the need for expensive numerical simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dy{sub 0.64}{l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace}: A complex carbide with a composite structure

The ternary carbide Dy{sub 5.64}[Fe{sub 2}C{sub 9}] has been prepared by high temperature synthesis from the elements. The compound forms as a composite structure with two partial structures, {l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace} and {l_brace}Dy{sub 0.64}{r_brace} crystallizing in space groups Pnam and Pbam, respectively. The lattice parameters a=2934.63(9) pm and b=1263.63(5) pm for the two partial structures are identical, whereas the c lattice parameters for {l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace} (c{sub H}=504.14(3) pm) and {l_brace}Dy{sub 0.64}{r_brace} (c{sub G}=1056.01(5) pm) are different. This gives rise to a modulated structure in the (3+1)D superspace group Pnam(00g) with q=c{sub H}/c{sub G}=0.4775. The refinement converged to R(F) values below 0.055 for each partial structure using harmonic and Crenel functions. The compound is a bad metallic conductor and represents a new structure type composed of Dy{sup 3+} species embedded in a matrix of discrete planar FeC(C{sub 2}){sub 2} units and edge-sharing Fe(C{sub 2}){sub 4} tetrahedra forming infinite chains Fe(C{sub 2}){sub 4/2} running along the c axis. - Graphical abstract: Dy guest atoms (green) within an carbon octahedral channel of the modulated structure together with a tetrahedral Fe(C{sub 2}){sub 4/2} chain and triangular planar FeC(C{sub 2}){sub 2} groups in the crystal structure of Dy{sub 0.64}{l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace}. Highlights: Black-Right-Pointing-Pointer The first successful refinement of a large composite structure Dy{sub 0.64}{l_brace}Dy{sub 5}[Fe{sub 2}C{sub 9}]{r_brace}. Black-Right-Pointing-Pointer The presence of two kinds of complex anions with Fe as central atoms and C-ligands within this structure. Black-Right-Pointing-Pointer The oxidation state of the Fe atoms are low, they can be assigned Fe{sup I} and Fe{sup II}.

36 MATERIALS SCIENCE↗

Exceptional strength and wear resistance in an AA7075/TiB 2 composite fabricated via friction consolidation

The friction consolidation method successfully reinforced aluminum 7075 alloy (AA7075) with high-volume fractions (12 and 24 vol%) of titanium diboride (TiB 2 ) by high pressure and severe plastic deformation at elevated temperatures. The consolidated AMCs have a uniform dispersion of submicron- and micron-sized TiB 2 particles in the AA7075 matrix, with significant refinement of the matrix grain size and the particles. The addition of TiB 2 significantly increases hardness by up to 50 %, Young’s modulus by up to 62 %, and ultimate tensile strength by up to 28 % to 672 MPa, while reducing ductility by 80 %. Wear resistance of 7075/24 vol% TiB 2 improves seven-fold compared to baseline, making it comparable to that of carburized steels. Microstructure-based finite element modeling provided a theoretical strength limit of ~730 MPa for the composites and indicated that high triaxiality in conjunction with severe equivalent plastic strain in a narrow area between the TiB 2 particles led to early fracture initiations, limiting the ductility.

36 MATERIALS SCIENCE↗

Interaction-dependent anisotropy of fractional quantum Hall states

In the absence of rotational symmetry, a fractional quantum Hall (FQH) system can exploit a geometric degree of freedom to minimize its ground-state energy. The mass anisotropy of bare particles interacting isotropically is partially inherited by the many-body FQH state, to an extent that depends on the type of interaction, filling fraction, and ground-state phase. Using numerical infinite density matrix renormalization group simulations, we investigate the transference of elliptical (C 2 -symmetric) anisotropy from the band mass of the bare particles to the FQH states, for various power-law interactions. We map out the response of FQH states to small anisotropy as a function of power-law exponent, filling, and statistics (bosonic or fermionic) of the constituents. Interestingly, we find a nonanalyticity in the linear response of the FQH state at a special filling-dependent value of the power-law exponent, above which the interactions effectively become zero-range (pointlike). In conclusion, we also investigate the effect of C 4 -symmetric band distortions, where we observe a strikingly different dependence on filling.

2-dimensional systems↗

Evaluation of the spin-orbit interaction within the graphically contracted function method.

The graphically contracted function (GCF) method is extended to include an effective one-electron spin-orbit (SO) operator in the Hamiltonian matrix construction. Our initial implementation is based on a multiheaded Shavitt graph approach that allows for the efficient simultaneous computation of entire blocks of Hamiltonian matrix elements. Two algorithms are implemented. The SO-GCF method expands the spin-orbit wave function in the basis of GCFs and results in a Hamiltonian matrix of dimension N{sub dim} = N{sub a} ((S{sub max} + 1){sup 2} ? S{sub min}{sup 2}). N{sub a} is the number of sets of nonlinear arc factor parameters, and S{sub min} and S{sub max} are respectively the minimum and maximum values of an allowed spin range in the wave function expansion. The SO-SCGCF (SO spin contracted GCF) method expands the wave function in a basis of spin contracted functions and results in a Hamiltonian matrix of dimension N{sub dim} = N{sub a}. For a given N{sub a} and spin range, the number of parameters defining the wave function is the same in the two methods after accounting for normalization. The full Hamiltonian matrix construction with both approaches scales formally as O(N{sub a}{sup 2}{omega}n{sup 4}) for n molecular orbitals. The {omega} factor depends on the complexity of the Shavitt graph and includes factors such as the number of electrons, N, and the number of interacting spin states. Timings are given for Hamiltonian matrix construction for both algorithms for a range of wave functions with up to N = n = 128 and that correspond to an underlying linear full-CI CSF expansion dimension of over 10{sup 75} CSFs, many orders of magnitude larger than can be considered using traditional CSF-based spin-orbit CI approaches. For Hamiltonian matrix construction, the SO-SCGCF method is slightly faster than the SO-GCF method for a given N{sub a} and spin range. The SO-GCF method may be more suitable for describing multiple states, whereas the SO-SCGCF method may be more suitable for describing single states.

97 MATHEMATICS AND COMPUTING↗

Development of a High Temperature Heater using an Yttria Stabilized Zirconia Cored Brick Matrix

The Ames pilot heater is a ceramic regenerative heater that provides high temperature air for aerodynamic and combustion experiments. The development of this heater to provide a heat storage bed with temperature capability of about 4600 R is described. A bed was designed and installed having cored brick elements of yttria-stabilized zirconia. The bed dimensions were 14 inches in diameter by 10 feet high. The thermal stress limitations of the bed were studied and maximum air flow rates based upon these limits were established. A combustion reheat system was designed and installed to provide the necessary control over the bed temperature distribution. The revised heater system was successfully operated at a maximum bed temperature of 4600 R. The successful operation demonstrated that yttria-stabilized zirconia cored brick can satisfy the high temperature-long duration requirement for storage heater applications.

Smith, K. W.↗

Improving the Numerical Stability of Fast Matrix Multiplication

Fast algorithms for matrix multiplication, namely those that perform asymptotically fewer scalar operations than the classical algorithm, have been considered primarily of theoretical interest. Apart from Strassen's original algorithm, few fast algorithms have been efficiently implemented or used in practical applications. However, there exist many practical alternatives to Strassen's algorithm with varying performance and numerical properties. Fast algorithms are known to be numerically stable, but because their error bounds are slightly weaker than the classical algorithm, they are not used even in cases where they provide a performance benefit. We argue in this study that the numerical sacrifice of fast algorithms, particularly for the typical use cases of practical algorithms, is not prohibitive, and we explore ways to improve the accuracy both theoretically and empirically. The numerical accuracy of fast matrix multiplication depends on properties of the algorithm and of the input matrices, and we consider both contributions independently. We generalize and tighten previous error analyses of fast algorithms and compare their properties. We discuss algorithmic techniques for improving the error guarantees from two perspectives: manipulating the algorithms, and reducing input anomalies by various forms of diagonal scaling. In conclusion, we benchmark performance and demonstrate our improved numerical accuracy.

97 MATHEMATICS AND COMPUTING↗

Analog E1 transitions and isospin mixing

We investigate whether isospin mixing can be determined in a model-independent way from the relative strength of E1 transitions in mirror nuclei. The specific examples considered are the A=31 and A=35 mirror pairs, where a serious discrepancy between the strengths of 7/2{sup -}{yields}5/2{sup +} transitions in the respective mirror nuclei has been observed. A theoretical analysis of the problem suggests that it ought to be possible to disentangle the isospin mixing in the initial and final states given sufficient information on experimental matrix elements. With this in mind, we obtain a lifetime for the relevant 7/2{sup -} state in {sup 31}S using the Doppler-shift attenuation method. We then collate the available information on matrix elements to examine the level of isospin mixing for both A=31 and A=35 mirror pairs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Processing of the glycosomal matrix-protein import receptor PEX5 of Trypanosoma brucei

Highlights: ► Most eukaryotic cells have a single gene for the peroxin PEX5. ► PEX5 is sensitive to in vitro proteolysis in distantly related organisms. ► TbPEX5 undergoes N-terminal truncation in vitro and possibly in vivo. ► Truncated TbPEX5 is still capable of binding PTS1-containing proteins. ► PEX5 truncation is physiologically relevant or an evolutionary conserved artifact. -- Abstract: Glycolysis in kinetoplastid protists such as Trypanosoma brucei is compartmentalized in peroxisome-like organelles called glycosomes. Glycosomal matrix-protein import involves a cytosolic receptor, PEX5, which recognizes the peroxisomal-targeting signal type 1 (PTS1) present at the C-terminus of the majority of matrix proteins. PEX5 appears generally susceptible to in vitro proteolytic processing. On western blots of T. brucei, two PEX5 forms are detected with apparent M{sub r} of 100 kDa and 72 kDa. 5′-RACE-PCR showed that TbPEX5 is encoded by a unique transcript that can be translated into a protein of maximally 72 kDa. However, recombinant PEX5 migrates aberrantly in SDS–PAGE with an apparent M{sub r} of 100 kDa, similarly as observed for the native peroxin. In vitro protease susceptibility analysis of native and {sup 35}S-labelled PEX5 showed truncation of the 100 kDa form at the N-terminal side by unknown parasite proteases, giving rise to the 72 kDa form which remains functional for PTS1 binding. The relevance of these observations is discussed.

60 APPLIED LIFE SCIENCES↗

Appearance of small polaron hopping conduction in iron modified cobalt lithium bismuth borate glasses

Lithium bismuth borate glasses containing different amounts of cobalt and iron oxides having chemical composition xFe{sub 2}O{sub 3}•(20-x)CoO•30Li{sub 2}O•10Bi{sub 2}O{sub 3}•40B{sub 2}O{sub 3} (x = 0, 5, 10, 15 and 20 mol% abbreviated as CFLBB1-5 respectively) prepared via melt quench technique have been investigated for their dc electrical conductivity. The amorphous nature of prepared glasses has been confirmed through X-ray diffraction measurements. The dc electrical conductivity has been analyzed by applying Mott’s small polaron hopping model. Activation energies corresponding to lower and higher temperature region have been evaluated. The iron ion concentration (N), mean spacing between iron ions (R) and polaron radius (R{sub p}) has been evaluated using the values of phonon radius (R{sub ph}) and Debye temperature (θ{sub D}). The glass sample without iron (CFLBB1) shows ionic conductivity but the incorporation of iron in the glass matrix results in the appearance of electronic conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tomography from the next generation of cosmic shear experiments for viable f(R) models

We present the cosmic shear signal predicted by two viable cosmological models in the framework of modified-action f(R) theories. We use f(R) models where the current accelerated expansion of the Universe is a direct consequence of the modified gravitational Lagrangian rather than Dark Energy (DE), either in the form of vacuum energy/cosmological constant or of a dynamical scalar field (e.g. quintessence). We choose Starobinsky's (St) and Hu and Sawicki's (HS) f(R) models, which are carefully designed to pass the Solar System gravity tests. In order to further support — or rule out — f(R) theories as alternative candidates to the DE hypothesis, we exploit the power of weak gravitational lensing, specifically of cosmic shear. We calculate the tomographic shear matrix as it would be measured by the upcoming ESA Cosmic Vision Euclid satellite. We find that in the St model the cosmic shear signal is almost completely degenerate with ΛCDM, but it is easily distinguishable in the HS model. Moreover, we compute the corresponding Fisher matrix for both the St and HS models, thus obtaining forecasts for their cosmological parameters. Finally, we show that the Bayes factor for cosmic shear will definitely favour the HS model over ΛCDM if Euclid measures a value larger than ∼ 0.02 for the extra HS parameter n{sub HS}.

79 ASTRONOMY AND ASTROPHYSICS↗