Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Spin Polarization from Circularly Polarized Light Induced Charge Transfer

Here, we show how a spin polarization can be generated through the photoinduced electron transfer of an achiral donor–acceptor complex following chiral light excitation. In particular, we illustrate the basic energetic and symmetry requirements for chirality induced spin selectivity where the chirality emerges from the electronic degrees of freedom following excitation with circularly polarized light. We study this effect in a simple model of a metalloporphyrin complex with an axial acceptor ligand using quantum mechanical rate theories and numerical simulations. We find that the spin polarization emerges due to the selective excitation of a ring current within the porphryin, breaking the degeneracy of the two degenerate spin states. The resultant spin polarization increases with the spin orbit coupling between the metal in the porphyrin and the axial ligand, and is transient, with a lifetime dependent on the rate of dephasing from the Jahn–Teller distortion mode. This proposed effect should be observable in spin-resolved photoemission spectroscopy.

charge transfer↗
DOE OSTI2020

Reversible plasmonic switching in a graphene nanoresonator loaded with a core – shell quantum dot

A model of an all-plasmonic switch based on a graphene waveguide integrated with a stub nanoresonator loaded with a quantum dot is considered. Using the full-wave numerical simulation, it is shown that successive on/off switching of the control surface plasmon – polariton wave at the input of the waveguide leads to a change in the phase of the signal plasmon – polariton wave in the nanoresonator by π. This causes reversible switching of the device operation regime – from almost complete blocking to stable transmission of the signal plasmon – polariton wave through the waveguide. The effect is implemented at rates of ∼0.5 THz for infrared electromagnetic waves localised in a device with a switching region of 40 × 20 nm. (paper)

36 MATERIALS SCIENCE↗
DOE OSTI2023

Solvent Induced Proton Polarization within the Nuclear–Electronic Orbital Framework

To explicitly account for nuclear quantum effects and solvent environments in simulations of chemical processes, the nuclear-electronic orbital approach is coupled with a polarizable continuum model (PCM). This NEO–PCM approach is used to explore the influence of solvation on nuclear polarization through applications to a water dimer and a set of protonated water tetramers. Nuclear polarization in these species is analyzed in terms of changes in proton density and oxygen–hydrogen bond length. Solvation is shown to enhance nuclear polarization with increasing dielectric constant. For the water dimer, the internal, hydrogen-bonded proton is shown to polarize more than the external, free proton. Moreover, proton quantization leads to greater solvent polarization through their mutual polarization. Furthermore, these calculations highlight the complex interplay among electronic, nuclear, and solvent polarization in chemical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Statistical Correlation Between Quantum Entanglement and Spin–Orbit Coupling in Crossed Beam Molecular Dynamics

Non-classical features like interference are already being harnessed to control the output of chemical reactions. However, quantum entanglement which is an equally enigmatic many-body quantum correlation can also be used as a powerful resource yet has eluded explicit attention. In this report, an experimental scheme under the crossed beam molecular dynamical setup, with the F + HD reaction, is proposed aiming to study the possible influence of entanglement within reactant pairs on the angular features of the product distribution. The aforesaid reaction has garnered interest recently, as an unusual horseshoe shape pattern in the product (HF) distribution was observed, which has been attributed to the coupling of spin and orbital degrees of freedom. An experimental scheme is proposed aiming to study the possible influence of entanglement on the necessity for the inclusion of such spin–orbit characteristics, under circumstances wherein the existence of entanglement and spin–orbit interaction is simultaneously detectable. The attainable results are further numerically simulated highlighting specific patterns corresponding to various possibilities. Finally, such studies if extended can provide unforeseen mechanistic insight into analogous reactions, too, from the lens of quantum information.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Optimizing temperature distributions for training neural quantum states using parallel tempering

Parametrized artificial neural networks (ANNs) can be very expressive ansatzes for variational algorithms, reaching state-of-the-art energies on many quantum many-body Hamiltonians. Nevertheless, the training of the ANN can be slow and stymied by the presence of local minima in the parameter landscape. One approach to mitigate this issue is to use parallel tempering methods, and in this work, we focus on the role played by the temperature distribution of the parallel tempering replicas. Using an adaptive method that adjusts the temperatures in order to equate the exchange probability between neighboring replicas, we show that this temperature optimization can significantly increase the success rate of the variational algorithm with negligible computational cost by eliminating bottlenecks in the replicas' random walk. Furthermore, we demonstrate this using two different neural networks, a restricted Boltzmann machine and a feedforward network, which we use to study a toy problem based on a permutation invariant Hamiltonian with a pernicious local minimum and the 𝐽 1 −𝐽 2 model on a rectangular lattice.

Neural network simulations↗
DOE OSTI2025

Variational quantum and neural quantum states algorithms for the linear complementarity problem

Variational quantum algorithms (VQAs) are promising hybrid quantum-classical methods designed to leverage the computational advantages of quantum computing while mitigating the limitations of current noisy intermediate-scale quantum (NISQ) hardware. Although VQAs have been demonstrated as proofs of concept, their practical utility in solving real-world problems—and whether quantum-inspired classical algorithms can match their performance—remains an open question. We present a novel application of the variational quantum linear solver (VQLS) and its classical neural quantum states-based counterpart, the variational neural linear solver (VNLS), as key components within a minimum map Newton solver for a complementarity-based rigid-body contact model. We demonstrate using the VNLS that our solver accurately simulates the dynamics of rigid spherical bodies during collision events. These results suggest that quantum and quantum-inspired linear algebra algorithms can serve as viable alternatives to standard linear algebra solvers for modelling certain physical systems.

neural quantum states↗
DOE OSTI2025

A Review of Quantum Computing Technologies in Power System Optimization

As modern power grids increasingly integrate variable renewable generation, distributed energy resources, and energy storage systems, classical optimization techniques are facing unprecedented challenges. This review examines the emerging application of quantum computing to overcome these challenges in power system optimization, including optimal power flow (OPF), unit commitment (UC), economic dispatch (ED), and intelligent switching and topology optimization (IS-TO). Recent research has introduced various quantum methodologies—such as gate-based, annealing-based, variational algorithms, and quantum-inspired algorithms—to address the combinatorial complexity inherent in grid reconfiguration and energy management. The review summaries the quantum algorithms, quantum devices and the power system test cases, highlighting hybrid quantum–classical strategies that leverage the complementary strengths of both paradigms. Some quantum advantages have been observed, including theoretical speedup, accurate simulation results, scalable qubit usage, efficient QUBO mapping. In particular, the review emphasizes the importance of integrating quantum optimization techniques with classical control frameworks, these hybrid approaches demonstrate the potential to improve real-time grid management and operational reliability. A significant portion of the analysis is devoted to the practical limitations of current quantum devices. Present-day quantum hardware, operating in the noisy intermediate-scale quantum (NISQ) era, remains highly sensitive to noise and limited in qubit connectivity, which constrains the scale and accuracy of implemented algorithms. The review delves into specific challenges such as the need for qubit-efficient encoding techniques and error mitigation strategies that are critical for handling real-world grid optimization problems. In addition, the work draws attention to the performance discrepancies between theoretical quantum speedups and experimental validations, underscoring the importance of rigorous benchmark studies using representative power grid test cases. In summary, this review highlights both the promise and limitations of quantum computing for power system optimization. It provides a comprehensive overview of the state-of-the-art technologies, categorizes recent advancements in algorithm design, and discusses practical considerations for implementation, and serves as an informative resource on current research. Future research directions include developing robust hybrid frameworks, advancing qubit-efficient formulations, and scaling up experimental demonstrations to confirm the theoretical advantages of quantum methods in large-scale power system operations.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Sachdev-Ye-Kitaev model on a noisy quantum computer

Here we study the SYK model -- an important toy model for quantum gravity on IBM's superconducting qubit quantum computers. By using a graph-coloring algorithm to minimize the number of commuting clusters of terms in the qubitized Hamiltonian, we find the gate complexity of the time evolution using the first-order product formula for N Majorana fermions is $\mathscr{O}$(N 5 J 2 t 2 /ε) where J is the dimensionful coupling parameter, t is the evolution time, and ε is the desired precision. With this improved resource requirement, we perform the time evolution for N=6,8 with maximum two-qubit circuit depth of 343. We perform different error mitigation schemes on the noisy hardware results and find good agreement with the exact diagonalization results on classical computers and noiseless simulators. In particular, we compute return probability after time t and out-of-time order correlators (OTOC) which is a standard observable of quantifying the chaotic nature of quantum systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

A Comprehensive Comparative Study of Active Learning Schemes for Nanophotonics Design

We present a benchmarking study of active learning (AL) schemes for designing planar multilayer nanophotonic metamaterials, where the design tasks are formulated as binary optimization problems. Different surrogate models, including factorization machine (FM), Gaussian process regression (GPR), and convolutional neural network (CNN), combined with different optimization methods, including exhaustive enumeration, discrete particle swarm optimization (DPSO), quantum annealing (QA), hybrid QA, and simulated annealing are studied. The benchmark cases investigated range from small problems with short binary lengths (N = 25) to large problems with N up to 100, focusing on the design of two classes of photonic structures, including antireflective coatings for the long-wavelength infrared region and transparent radiative coolers. For small problems, CNN coupled with DPSO in AL achieves the best performance. As N increases, FM with QA outperforms GPR and CNN. For FM-based AL, hybrid QA yields the best optimization results, particularly in high-dimensional cases (N = 100). These results demonstrate that the optimization method can significantly affect in AL performance as N increases, and that QA-based optimization can provide practical routes for mitigating the optimization bottleneck in high-dimensional problems.

Jung, Serang [Kyung Hee University, Korea]↗
DOE OSTI2022

Structure- and Interaction-Based Design of Anti-SARS-CoV-2 Aptamers

Aptamer selection against novel infections is a complicated and time-consuming approach. Synergy can be achieved by using computational methods together with experimental procedures. In this study, we aim to develop a reliable methodology for a rational aptamer in silico et vitro design. The new approach combines multiple steps: (1) Molecular design, based on screening in a DNA aptamer library and directed mutagenesis to fit the protein tertiary structure; (2) 3D molecular modeling of the target; (3) Molecular docking of an aptamer with the protein; (4) Molecular dynamics (MD) simulations of the complexes; (5) Quantum-mechanical (QM) evaluation of the interactions between aptamer and target with further analysis; (6) Experimental verification at each cycle for structure and binding affinity by using small-angle X-ray scattering, cytometry, and fluorescence polarization. By using a new iterative design procedure, structure- and interaction-based drug design (SIBDD), a highly specific aptamer to the receptor-binding domain of the SARS-CoV-2 spike protein, was developed and validated. The SIBDD approach enhances speed of the high-affinity aptamers development from scratch, using a target protein structure. The method could be used to improve existing aptamers for stronger binding. This approach brings to an advanced level the development of novel affinity probes, functional nucleic acids. It offers a blueprint for the straightforward design of targeting molecules for new pathogen agents and emerging variants.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Understanding Gas Absorption in Multivalent Ionic Liquids via Solute-Solvent Interaction Analyses

Solute-solvent interactions are often evaluated to understand and explain gas solubilities. This information is regularly used to interpret gas solubility and separation within ionic liquids (ILs). Here, we use several different quantum chemical and previous molecular dynamics simulation results to show that strong solute-solvent interactions neither lead to high solubility nor to high selectivity, with respect to other solutes. Instead, the solute-solvent interaction strength with different isolated IL ions is affected by the electrostatic extremes. Also, the solute-solvent interaction with different IL molecules is strongly correlated to the molecular volumes or polarizabilities (within a series of same-anion based ILs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Identification of a Na + -Binding Site near the Oxygen-Evolving Complex of Spinach Photosystem II

The oxygen-evolving complex (OEC) of photosystem II (PSII) is an oxomanganese cluster composed of four redox-active Mn ions, and one redox-inactive Ca 2+ ion, with two nearby bound Cl – ions. Sodium is a common counter-ion of both chloride and hydroxide anions, and a sodium-specific binding site has not been identified near the OEC. Furthermore, we find that the oxygen-evolution activity of spinach PSII increases with [Na + ], particularly at high pH. A Na + -specific binding site next to the OEC, upon deprotonation of the D1-H337 amino-acid residue, is suggested by the analysis of two recently published PSII cryo-EM maps in combination with quantum mechanical calculations and molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Consistency-Enhanced Evolution for Variable Selection Can Identify Key Chemical Information from Spectroscopic Data

In the last few decades, spectroscopic techniques such as near-infrared (NIR) spectroscopy have gained wide applications in several industries, such as the pharmaceutical, agricultural, oil, and gas industries. As a result, various soft sensors have been developed to predict sample properties from spectroscopic readings. Because the spectroscopic readings at different wavelengths, especially at the adjacent wavelengths, are highly correlated, it has been shown that variable selection could significantly improve a soft sensor’s prediction performance while reducing the model complexity. To improve the prediction performance, most variable selection methods focus on identifying the variables (i.e., wavelengths or wavelength segments) that are strongly correlated with the dependent variable. Although many successful applications have been reported, these variable selection methods do have their limitations. Specifically, the selected wavelengths sometimes show little connection to the chemical bounds or functional groups presenting in the sample. In addition, the selected variables can be quite sensitive to the choice of the training samples. In this work, we address these limitations from a different perspective: if a variable selection algorithm can identify the truly relevant input variables, it should consistently identify the same subset of variables regardless of the choice of the training samples. Therefore, we propose a variable selection method that aims to improve the consistency of variable selection resulting from different training samples. Furthermore, the new algorithm is termed consistency-enhanced evolution for variable selection (CEEVS). To demonstrate the performance and robustness of CEEVS, we compare the proposed method with three representative variable selection methods using five published NIR data sets. These case studies clearly demonstrate that by improving the variable selection consistency, we can not only achieve improved prediction performance, but also identify key chemical information from spectroscopic data.

42 ENGINEERING↗
DOE OSTI2026

Characterizing Defect Dynamics in Silicon Carbide Using Symmetry-Adapted Collective Variables and Machine Learning Interatomic Potentials

Silicon carbide (SiC) divacancies are attractive candidates for spin-defect qubits possessing long coherence times and optical addressability. The high activation barriers associated with SiC defect formation and motion pose challenges for their study by first-principles molecular dynamics. In this work, we develop and deploy machine learning interatomic potentials (MLIPs) to accelerate defect dynamics simulations while retaining ab initio accuracy. We employ an active learning strategy comprising symmetry-adapted collective variable discovery and enhanced sampling to compile configurationally diverse training data, calculation of energies and forces using density functional theory (DFT), and training of an E(3)-equivariant MLIP based on the Allegro model. Here, the trained MLIP reproduces DFT-level accuracy in defect transition activation free energy barriers, enables the efficient and stable simulation of multidefect 216-atom supercells, and permits an analysis of the temperature dependence of defect thermodynamic stability and formation/annihilation kinetics to propose an optimal annealing temperature to maximally stabilize VV divacancies.

Computer simulations↗
DOE OSTI2019

Is the Trotterized UCCSD Ansatz Chemically Well-Defined?

The variational quantum eigensolver (VQE) has emerged as one of the most enticing near-term quantum algorithms that can be used to simulate many-body systems such as molecular electronic structures. Serving as an attractive ansatz in the VQE algorithm, unitary coupled cluster (UCC) theory has seen a renewed interest in recent literature. Yet, unlike the original classical UCC theory, implementation on a quantum computer requires a finite-order Suzuki-Trotter decomposition to separate the exponentials of the large sum of Pauli operators. While previous literature has recognized the non-uniqueness of different orderings of the operators in the Trotterized form of UCC methods, the question of whether or not different orderings matter at the chemical scale has not been addressed. In this letter, we explore the effect of operator ordering on the Trotterized UCCSD ansatz, as well as the much more compact k-UpCCGSD ansatz recently proposed by Lee et al. We observe a significant, system-dependent variation in the energies of Trotterizations with different operator orderings. The energy variations occur on a chemical scale, sometimes on the order of hundreds of kcal/mol. This letter establishes the need to define not only the operators present in the ansatz, but also the order in which they appear. This is necessary for adhering to the quantum chemical notion of a ``model chemistry'', in addition to the general importance of scientific reproducibility. As a final note, we suggest a useful strategy to select out of the combinatorial number of possibilities, a single well-defined and effective ordering of the operators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Origins of Conformational Heterogeneity in Peptoid Helices Formed by Chiral N -1-Phenylethyl Sidechains

N-substituted glycines (polypeptoids) containing chiral hydrophobic sidechains are known to fold into biomimetic alpha helices. These helix formers often produce conformationally heterogeneous structures and are difficult to characterize at a sub-nanometer resolution. Previously, peptoid N-1-phenylethyl (S)-enantiomer sidechains (Nspe) were inferred from various experiments to form right-handed helices and (R)-enantiomers (Nrpe), left-handed helices. Prior computational work for N(s/r)pe oligomers has struggled to reproduce this trend. Herein, quantum mechanics calculations and molecular dynamics simulations are used to understand the origins of this discrepancy. Results from DFT and molecular mechanics calculations on a variety of Nspe and Nrpe oligomers as a function of chain length are in agreement, showing that Nspe and Nrpe prefer left- and right-handed helices, respectively. Additional metadynamics simulations are used to study Nrpe and Nspe oligomers folding in water. These results show that the free-energy driving forces for assembly into a helical backbone configuration are very small (within ~k B T). Lastly, we compare DFT calculations for other experimentally characterized peptoid sidechains, N(r/s)sb, N(r/s)tbe, and N(r/s)npe. In this analysis, we show that peptoid sidechains determined to be more robust experimentally (tbe and npe) have helical preferences opposite the trend seen in less robust assemblies formed by N(r/s)pe and N(r/s)sb chemistries. Furthermore, the more robust tbe and nnpe favor the (S)-enantiomer to right-handed and the (R)-enantiomers to left-handed helices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Theoretical Investigations of Anharmonic Effects and Phonon Transport in the Cubic Phase of Crystalline Perovskite CsPbCl 3

The role of anharmonic effects on lattice dynamics and thermal transport has been investigated in the cubic phase of the CsPbCl 3 perovskite. Limitations of the harmonic approximation, which lead to phonon instabilities in the Brillouin zone, were addressed based on self-consistent phonon theory in combination with first-principles calculations and by incorporation of frequency renormalization effects from bubble and loop diagrams. This theoretical approach demonstrates significant improvements compared to results obtained using a self-consistent phonon dynamic matrix. Both the cubic-to-tetragonal phase transition temperature as well as the predicted lattice thermal conductivity values show good agreement with selected sets of available experimental data. In conclusion, the accuracy of the predicted thermal conductivity data is also tested against systems significantly larger than those allowed by quantum calculations, by using molecular dynamic simulations with machine-learning force fields.

Lattices↗
DOE OSTI2021

Tuning Electronic Properties of 2D Materials Using Metal Adsorbates: Cu at WTe 2 Edges

Two-dimensional materials exhibit properties promising for novel applications. Topologically protected states at their edges can be harnessed for use in quantum devices. We use ab initio simulations to examine properties of edges in 1T'-WTe 2 monolayers, known to exhibit topological order, and their interactions with Cu atoms. Comparison of (010)-oriented edges that have the same composition but different terminations shows that, as the number of Cu atoms increases, their thermodynamically-preferred arrangement depends on the details of the edge structure. Cu atoms aggregate into a cluster at the most stable edge; while the cluster is non-magnetic, it spin-polarizes the W atoms along the edge, which removes the topological protection. At the metastable edge, Cu atoms form a chain incorporated into the WTe 2 lattice; the topological state is preserved in spite of the dramatic edge restructuring. This suggests that exploiting interactions of metal species with metastable edge terminations can provide a path towards non-invasive interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗