Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Protection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Space shuttle orbiter trimmed center-of-gravity extension study. Volume 3: Impact of retrofits for center-of-gravity extension on orbiter thermal-protection system

Heat transfer studies were conducted at Mach 10.3 on space shuttle orbiter models with the S-2 fillet and C-4 canard retrofit moldlines which were generated in aerodynamic and system design studies to increase the allowable c.g. range of the orbiter. Areas of orbiter most strongly affected were the sides where a shear layer which separated along the wing leading edge impinged. Analytical studies of the heating effect on the thermal-protection system were made which indicated that scar weight on the orbiter sides due to allowances for retrofits of the S-2 fillet and C-4 canard is small (less than about 90 kg (200 lbs) in comparison to the total weight of the retrofit).

Dunavant, J. C.↗
NASA NTRS1979

Remote sensing applied to the evaluation of crop freeze protection devices

Thermal images from an aircraft-mounted scanner are used to evaluate the effectiveness of crop freeze protection devices. Fuel oil heaters, wind machines and irrigation systems are evaluated from flights at an altitude of 450 m over an experimental citrus grove of 1.5 hectares.

Sutherland, R. A.↗
NASA NTRS1977

Determination of overcharge protection

Nylon separator degradation was examined as a function of temperature. Electrochemically active uncharged excess negative (overcharge protection)was measured by charging a cell venting it until it became fully charged, and continuing to overcharge the vent gas. The gas was analyzed as a function of time. The amount of hydrogen evolved was examined, and the cell voltage was observed as the oxygen and/or hydrogen evolved from the cell.

Scott, W. R.↗
NASA NTRS1979

Thermal insulation protection means

A system for providing thermal insulation for portions of a spacecraft which do not exceed 900 F during ascent or reentry relative to the earth's atmosphere is described. The thermal insulation is formed of relatively large flexible sheets of needled Nomex felt having a flexible waterproof coating. The thickness of the felt is sized to protect against projected temperatures and is attached to the structure by a resin adhesive. Vent holes in the sheets allow ventilation while maintaining waterproofing. The system is heat treated to provide thermal stability.

Dotts, R. L.↗
NASA NTRS1979

Fire protection covering for small diameter missiles

Flexible intumescent protection sheeting of unusually uniform thickness were prepared from epoxy-polysulfide compositions, containing microfibers and the ammonium salt of 1,4-nitroaniline-2-sulfonic acid, as disclosed in U.S. Pat. No. 3,663,464, except that an ammonium salt particle size in the order of 5 to 8 microns and a fiber size of about 1/128th inch in length and 3 to 5 microns in diameter were found critical to obtain the required density of 1.46 to 1.50 g/cc. The insulation sheeting was prepared by a continuous process involving vacuum mixing, calendering, and curing under very strict conditions which depend to some extent upon the thickness of the sheet produced.

Riccitiello, S. R.↗
NASA NTRS1978

Lightning protection for traffic control systems

The probable cause of the several types of problems found related to lightning are determined. Protective measures were selected for each type of problem and the results are presented.

Plumer, J. A.↗
NASA NTRS1978

Voyager electrostatic discharge protection program

Tests and analysis indicated the need to protect the Voyager spacecraft from electrostatic discharges in the Jupiter energetic charged particle environment. This paper describes the identified problem areas, the test and analysis methods and results, the resultant design changes, and the final assessment of the design changes and verification methods.

Whittlesey, A. C.↗
NASA NTRS1978

Protection of solar collector materials from UV

Certain plastic films, such as KAPTON, are known to be stable with excellent long-term aging characteristics under intense uv radiation. Our recent measurements of the optical transmission spectra of KAPTON films show an absorption edge in the blue and are interpreted in terms of an electronic excitation mechanism. The application of this type of film as covering for solar collectors is discussed in regard to the protection this strong uv absorption offers to the materials underneath.

Castle, J. G., Jr.↗
NASA NTRS1979

Synthesis of amino acyl adenylates using the tert-butoxycarbonyl protecting group

The synthesis of amino acyl adenylates using N-tert-butoxycarbonyl-protected amino acids is reported. Anhydrous solutions containing N-tert-butoxycarbonyl alanine, phenylalanine, and methionine were combined with the anhydrous mono (tri-n-octylammonium) salt of adenosine 5'-phosphate and the resultant amino acyl adenylates were characterized by means of elemental analysis, and infrared and proton NMR spectroscopy. Amino acyl adenylate yields of up to 60% were obtained with high purity at room temperatures. The reported synthesis is considered to represent a large improvement over previous methods due to the purity of the products, normal temperature requirements, and the stability of the starting compounds, which suggests its use in investigations of prebiotic oligo- and polypeptide synthesis.

Armstrong, D. W.↗
NASA NTRS1981

Cap protects aircraft nose cone

Inexpensive, easily fabricated cap protects aircraft nose cone from erosion. Made of molded polycarbonate, cap has been flight tested at both subsonic and supesonic speeds. Its strength and erosion characteristics are superior to those of fiberglass cones.

Bryan, C. F., Jr.↗
NASA NTRS1979

Thermal protection system flight repair kit

A thermal protection system (TPS) flight repair kit required for use on a flight of the Space Transportation System is defined. A means of making TPS repairs in orbit by the crew via extravehicular activity is discussed. A cure in place ablator, a precured ablator (large area application), and packaging design (containers for mixing and dispensing) for the TPS are investigated.

Source record↗
NASA NTRS1979

Meteoroid Protection Methods for Spacecraft Radiators Using Heat Pipes

Various aspects of achieving a low mass heat pipe radiator for the nuclear electric propulsion spacecraft were studied. Specific emphasis was placed on a concept applicable to a closed Brayton cycle power sub-system. Three aspects of inter-related problems were examined: (1) the armor for meteoroid protection, (2) emissivity of the radiator surface, and (3) the heat pipe itself. The study revealed several alternatives for the achievement of the stated goal, but a final recommendation for the best design requires further investigation.

Ernst, D. M.↗
NASA NTRS1980

Structural tests on a tile/strain isolation pad thermal protection system

The aluminum skin of the space shuttle is covered by a thermal protection system (TPS) consisting of a low density ceramic tile bonded to a matted-felt material called strain insulation pad (SIP). The structural characteristics of the TPS were studied experimentally under selected extreme load conditions. Three basic types of loads were imposed: tension, eccentrically applied tension, and combined in-plane force and transverse pressure. For some tests, transverse pressure was applied rapidly to simulate a transient shock wave passing over the tile. The failure mode for all specimens involved separation of the tile from the SIP at the silicone rubber bond interface. An eccentrically applied tension load caused the tile to separate from the SIP at loads lower than experienced at failure for pure tension loading. Moderate in-plane as well as shock loading did not cause a measurable reduction in the TPS ultimate failure strength. A strong coupling, however, was exhibited between in-plane and transverse loads and displacements.

Williams, J. G.↗
NASA NTRS1980

Response of surge protection devices to fast rising pulses

Two types of lightning protection modules incorporating leadless (pill type) Zener like devices were evaluated with regard to their ability to suppress EMP induced transients. Two series of tests were performed to evaluate the ability of these modules to react to fast rate of rise ( 1Kv/ns) transients, and the attenuation introduced and the ability to limit damped sinusoid pulses which may be induced due to an EMP resulting from a nuclear detonation.

Mindel, I. N.↗
NASA NTRS1979

Meteoroid protection for the Comet Halley probe

The high closing speed of 57km/s between the spacecraft and Halley poses special problems in the design of the required meteoroid protection. A double wall structure with a total thickness equal to 0.1 to 1 times the diameter of the largest meteoroid encountered is sufficient to stop that meteoroid. However, the unusually high number of meteoroid impacts on the Halley probe will cause significant erosion of the outer wall so that failure of the second wall is more likely to occur from a small meteoroid passing through a previously created hole in the outer wall and then penetrating the second wall. Calculations of the shielding required based on this failure mode, show that a double wall structure must actually have a total thickness 1.2 to 7.3 times the diameter of the largest meteoroid encountered, depending on the size distribution of the meteoroids.

Humes, D.↗
NASA NTRS1979

Electrostatic protection of the Solar Power Satellite and rectenna

Several features of the interactions of the solar power satellite (SPS) with its space environment were examined theoretically. The voltages produced at various surfaces due to space plasmas and the plasma leakage currents through the kapton and sapphire solar cell blankets were calculated. At geosynchronous orbit, this parasitic power loss is only 0.7%, and is easily compensated by oversizing. At low-Earth orbit, the power loss is potentially much larger (3%), and anomalous arcing is expected for the EOTV high voltage negative surfaces. Preliminary results of a three dimensional self-consistent plasma and electric field computer program are presented, confirming the validity of the predictions made from the one dimensional models. Magnetic shielding of the satellite, to reduce the power drain and to protect the solar cells from energetic electron and plasma ion bombardment is considered. It is concluded that minor modifications can allow the SPS to operate safely and efficiently in its space environment. The SPS design employed in this study is the 1978 MSFC baseline design utilizing GaAs solar cells at CR-2 and an aluminum structure.

Freeman, J. W.↗
NASA NTRS1980

Room temperature mechanical properties of shuttle thermal protection system materials

Tests were conducted at room temperature to determine the mechanical properties and behavior of materials used for the thermal protection system of the space shuttle. The materials investigated include the LI-900 RSI tiles, the RTV-560 adhesive and the .41 cm (.16 thick) strain isolator pad (SIP). Tensile and compression cyclic loading tests were conducted on the SIP material and stress-strain curves obtained for various proof loads and load cyclic conditioning. Ultimate tensile and shear tests were conducted on the RSI, RTV, and SIP materials. The SIP material exhibits highly nonlinear stress-strain behavior, increased tangent modulus and ultimate tensile strength with increased loading rate, and large short time load relaxation and moderate creep behavior. Proof and cyclic load conditioning of the SIP results in permanent deformation of the material, hysteresis effects, and much higher tensile tangent modulus values at large strains.

Sawyer, J. W.↗