SEARCH · Engineering Papers

Results for “Performance Rating Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Rapid assessment of crystal orientation in semi-crystalline polymer films using rotational zone annealing and impact of orientation on mechanical properties

Crystal orientation in semi-crystalline polymers tends to enhance their performance, such as increased yield strength and modulus, along the orientation direction. Zone annealing (ZA) orients the crystal lamellae through a sharp temperature gradient that effectively directs the crystal growth, but the sweep rate (V ZA ) of this gradient significantly impacts the extent of crystal orientation. Here in this work, we demonstrate rotational zone annealing (RZA) as an efficient method to elucidate the influence of V ZA on the crystal morphology of thin films in a single experiment using isotactic poly(1-butene), PB-1, as a model semi-crystalline polymer. These RZA results are confirmed using standard, serial linear ZA to tune the structure from an almost unidirectional oriented morphology to weakly oriented spherulites. The overall crystallinity is only modestly changed in comparison to isothermal crystallization (maximum of 55% from ZA vs. 48% for isothermal crystallization). However, the average grain size increases and the spherulites become anisotropic from ZA. Due to these structural changes, the Young's modulus of the oriented films, both parallel and perpendicular to the spherulite orientation direction, is significantly increased by ZA. The modulus does become anisotropic after ZA due to the directionality in the crystal structure, with more than a threefold increase in the modulus parallel to the orientation direction for the highest oriented film in comparison to the modulus from isothermal crystallization. Lastly, RZA enables rapid identification of conditions to maximize orientation of crystals in thin polymer films, which could find utility in determining conditions to improve crystallinity and performance in organic electronics.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Remarkable enhancement of photocatalytic performance via constructing a novel Z-scheme KNbO{sub 3}/Bi{sub 2}O{sub 3} hybrid material

Highlights: • A series of KNbO{sub 3}/Bi{sub 2}O{sub 3} composite materials with different percentage of KNbO{sub 3} have been prepared by simple methods using Bismuth oxide, niobium pentoxide and potassium hydroxide as precursors. • The rate constants of the best photocatalyst (30 wt.% KNbO{sub 3}/Bi{sub 2}O{sub 3}) for the RhB and MO degradation are about 3.7 times and 4.1 times faster than those of pure Bi{sub 2}O{sub 3} and approximately 6.9 times and 7.1 times faster than those of pure KNbO{sub 3}, respectively. • The composite photocatalyst exhibits a good physical and chemical stability during the photocatalytic reaction process. • Results demonstrat that the migration of photogenerated carriers adopts a direct Z-scheme mechanism and ·O{sup 2−}, ·OH, and h{sup +} are the main reactive species in the photocatalytic process. - Abstract: KNbO{sub 3}/Bi{sub 2}O{sub 3} composite materials with different percentage of KNbO{sub 3} have been prepared by simple methods The structural and optical properties of the resulting samples are thoroughly characterized by XRD, UV–vis DRS, SEM, TEM, and N{sub 2}-sorption analysis. The photocatalytic activities of the as-prepared materials for the degradation of rhodamine B (RhB) and methyl orange (MO) are evaluated under UV-light irradiation. The results indicate that the optimal loading amount of KNbO{sub 3} is 30 wt.% (i. e., 30 wt.% KNbO{sub 3}/Bi{sub 2}O{sub 3}), The rate constants of which for the RhB and MO degradation are about 3.7 times and 4.1 times faster than those of pure Bi{sub 2}O{sub 3} and approximately 6.9 times and 7.1 times faster than those of pure KNbO{sub 3}, respectively. Based on a series of characterizations, it can be concluded that the migration of photogenerated carriers adopts a direct Z-scheme mechanism and ·O{sup 2−}, ·OH, and h{sup +} are the main reactive species in the photocatalytic reactions.

36 MATERIALS SCIENCE↗

DOE OSTI2014

First principles transport coefficients and reaction rates of Ar{sub 2}{sup +} ions in argon for cold plasma jet modeling

Momentum-transfer collision cross-sections and integral collision cross-sections for the collision-induced dissociation are calculated for collisions of ionized argon dimers with argon atoms using a nonadiabatic semiclassical method with the electronic Hamiltonian calculated on the fly via a diatomics-in-molecules semiempirical model as well as inverse-method modeling based on simple isotropic rigid-core potential. The collision cross-sections are then used in an optimized Monte Carlo code for evaluations of the Ar{sub 2}{sup +} mobility in argon gas, longitudinal diffusion coefficient, and collision-induced dissociation rates. A thorough comparison of various theoretical calculations as well as with available experimental data on the Ar{sub 2}{sup +} mobility and collision cross-sections is performed. Good agreement is found between both theoretical approaches and the experiment. Analysis of the role of inelastic processes in Ar{sub 2}{sup +}/Ar collisions is also provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Process design tools and techno-economic analysis for capacitive deionization

Capacitive deionization (CDI) devices use cyclical electrosorption on porous electrode surfaces to achieve water desalination. Process modeling and design of CDI systems requires accurate treatment of the coupling among input electrical forcing, input flow rates, and system responses including salt removal dynamics, water recovery, energy storage, and dissipation. Techno-economic analyses of CDI further require a method to calculate and compare between a produced commodity (e.g. desalted water) versus capital and operational costs of the system. In this work, we demonstrate a new modeling and analysis tool for CDI developed as an installable Matlab program that allows direct numerical simulation of CDI dynamics and calculation of key performance and cost parameters. The program is provided for free and is used to run open-source Simulink models. The Simulink environment sends information to the program and allows for a drag and drop design space where users can connect CDI cells to relevant periphery blocks such as grid energy, battery, solar panel, waste disposal, and maintenance/labor cost streams. The program allows for simulation of arbitrary current forcing and arbitrary flow rate forcing of one or more CDI cells. We employ validated well-mixed reactor formulations together with a non-linear circuit model formulation that can accommodate a variety of electric double layer sub-models (e.g. for charge efficiency). The program includes a graphical user interface (GUI) to specify CDI plant parameters, specify operating conditions, run individual tests or parameter batch-mode simulations, and plot relevant results. The techno-economic models convert among dimensional streams of species (e.g. feed, desalted water, and brine), energy, and cost and enable a variety of economic estimates including levelized water costs.

42 ENGINEERING↗

DOE OSTI2015

High-resolution X-ray emission spectroscopy with transition-edge sensors: present performance and future potential

X-ray emission spectroscopy (XES) is a powerful element-selective tool to analyze the oxidation states of atoms in complex compounds, determine their electronic configuration, and identify unknown compounds in challenging environments. Until now the low efficiency of wavelength-dispersive X-ray spectrometer technology has limited the use of XES, especially in combination with weaker laboratory X-ray sources. More efficient energy-dispersive detectors have either insufficient energy resolution because of the statistical limits described by Fano or too low counting rates to be of practical use. This paper updates an approach to high-resolution X-ray emission spectroscopy that uses a microcalorimeter detector array of superconducting transition-edge sensors (TESs). TES arrays are discussed and compared with conventional methods, and shown under which circumstances they are superior. It is also shown that a TES array can be integrated into a table-top time-resolved X-ray source and a soft X-ray synchrotron beamline to perform emission spectroscopy with good chemical sensitivity over a very wide range of energies.

Uhlig, J.↗

DOE OSTI2016

The effect of cobalt doping on the morphology and electrochemical performance of high-voltage spinel LiNi 0.5 Mn 1.5 O 4 cathode material

In this paper, to reveal the effects of Co-doping on the electrochemical performance of micro-sized LiNi 0.5 Mn 1.5 O 4 (LNMO), undoped LNMO and Co-doped LiCo 0.1 Ni 0.45 Mn 1.45 O 4 (LCoNMO) are synthesized via a PVP-combustion method and calcined at 1000 °C for 6 h. SEM and XRD analyses suggest that Co-doping decreases the particle size and the Li z Ni 1-z O 2 impurity at the calcination temperature of 1000 °C. LCoNMO has much better rate capability while its specific capacity at C/5 is 10% lower than that of LNMO. At 15 C rate, their specific capacities are closed, and the LCoNMO delivers 86.2% capacity relative to C/5, and this value for LNMO is only 77.0%. The D Li + values determined by potential intermittent titration technique (PITT) test of LCoNMO are 1–2 times higher than that of LNMO in most SOC region. The LCoNMO shows very excellent cycling performance, which is the best value compared with literatures. After 1000 cycles, the LCoNMO still delivers 94.1% capacity. Finally, moreover, its coulombic efficiency and energy efficiency keep at 99.84% and over 97.3% during 1 C cycling, respectively.

36 MATERIALS SCIENCE↗

DOE OSTI2014

Mechanistic insights into mode of action of potent natural antagonists of BACE-1 for checking Alzheimer’s plaque pathology

Highlights: •Accumulation of Aβ plaques is one of the major pathology associated with Alzheimer’s disease. •Inhibition of β-Secretase or BACE-1 offers a viable prospect to check the growth of these plaques. •A large virtual dataset of natural compounds was screened against BACE-1. •Top two hits were analyzed for thermodynamic and structural stability using MD simulations. •Their detailed binding mode of actions were elucidated. -- Abstract: Alzheimer’s is a neurodegenerative disorder resulting in memory loss and decline in cognitive abilities. Accumulation of extracellular beta amyloidal plaques is one of the major pathology associated with this disease. β-Secretase or BACE-1 performs the initial and rate limiting step of amyloidic pathway in which 37–43 amino acid long peptides are generated which aggregate to form plaques. Inhibition of this enzyme offers a viable prospect to check the growth of these plaques. Numerous efforts have been made in recent years for the generation of BACE-1 inhibitors but many of them failed during the preclinical or clinical trials due to drug related or drug induced toxicity. In the present work, we have used computational methods to screen a large dataset of natural compounds to search for small molecules having BACE-1 inhibitory activity with low toxicity to normal cells. Molecular dynamics simulations were performed to analyze molecular interactions between the screened compounds and the active residues of the enzyme. Herein, we report two natural compounds of inhibitory nature active against β-secretase enzyme of amyloidic pathway and are potent lead molecules against Alzheimer’s disease.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2016

The GPU-enabled divide-expand-consolidate RI-MP2 method (DEC-RI-MP2)

We report porting of the Divide-Expand-Consolidate Resolution of the Identity second-order Møller–Plesset perturbation (DEC-RI-MP2) method to the graphic processing units (GPUs) using OpenACC compiler directives. It is shown that the OpenACC compiler directives implementation efficiently accelerates the rate-determining step of the DEC-RI-MP2 method with minor implementation effort. Moreover, the GPU acceleration results in a better load balance and thus in an overall scaling improvement of the DEC algorithm. The resulting cross-platform hybrid MPI/OpenMP/OpenACC implementation has scalable and portable performance on heterogeneous HPC architectures. The GPU-enabled code was benchmarked using a reduced version of the S12L test set of Stefan Grimme (Grimme, Chem. Eur. J. 2012, 18, 9955) consisting of supramolecular complexes up to 158 atoms and 4292 contracted basis functions (cc-pVTZ). The test set results demonstrate the general applicability of the DEC-RI-MP2 method showing results consistent with the DEC-RI-MP2 introductory paper (Baudin et al., J. Chem. Phys. 2016, 144, 054102) on molecules of complicated electronic structures. © 2016 Wiley Periodicals, Inc.

Chemistry↗

DOE OSTI2014

Thermal Versus Impedance-Based Ablation of Renal Cell Carcinoma: A Meta-analysis

Background: Percutaneous radiofrequency ablation (RFA) of renal carcinoma has become an established treatment modality. However, thermal (TB) versus impedance-based (IB)-RF generators have not been previously compared. Methods: A literature search on the application of RFA for renal masses using TB or IB-RF generators was performed. The safety, efficacy, and long-term outcomes of TB versus IB-based RFA were assessed using the outcome measures of technical success, local recurrence rate, complications, and preservation of renal function. Results: Across the 27 included studies, pooled results suggested comparable results for technical success (TB-RFA 98.53 % vs. IB-RFA 98.78 %, P = 0.9813). Clinical efficacy results were also similar across both generators (91.0 % TB-RFA vs. 91.5 % IB-RFA; P = 0.73). At follow-up, no differences in renal function (relative risk [RR] 0.5, 95 % confidence interval [CI] 0.45–5.48), and local recurrence (RR 0.717, 95 % CI 0.49–1.50) were observed. The pooled proportion of overall complication rates was 13.1 % for TB-RFA and 11.5 % for IB-RFA. Conclusion: No differences in the observed parameters were found either during surgery or at follow-up.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

DOE OSTI2023

Process-structure-property relationships for droplet-on-demand liquid-metal-jetted parts

Liquid metal jetting droplet-on-demand additive manufacturing is an attractive alternative to industry-standard, laser-based metal additive manufacturing techniques that use powder feedstocks and produce large heat affected zones. Liquid metal jetting provides a low feedstock footprint, minimal materials waste, less contamination and inclusions from feedstock, and is compatible with a large range of materials. However, little has been reported on the liquid metal jetting process-structure-property relationships that are crucial to understanding how to consistently print high quality metal parts. We investigate the effects of build plate temperature, infill pattern, and track raster rate on the macro- and microstructure, density, hardness, and tensile strength of metal parts created with our custom droplet-on-demand setup using pure tin feedstock as a surrogate for more relevant structural materials. We found that although the build plate temperature had the largest influence on the structure and properties, the infill pattern is an important factor for optimal structural integrity. It was observed that the track raster rate influenced track-to-track porosity and should be considered in toolpath development. Despite printing in ambient air, we could not identify oxide on the surface or in the bulk of the parts and saw no adverse effects on microstructure or tensile performance. The results and methods of this study will help guide future work in optimizing the liquid metal jetting process to reliably print parts using any liquid metal jetting system for a wide variety of metal feedstocks.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Development of the multigroup cross section library for the CASL neutronics simulator MPACT: Method and procedure

The MPACT neutronics module of the Consortium for Advanced Simulation of Light Water Reactors (CASL) core simulator is a 3D whole core transport code being developed for the CASL toolset known as the Virtual Environment for Reactor Analysis (VERA). Key characteristics of the MPACT code include a subgroup method for resonance self-shielding and a whole-core transport solver with a 2D/1D synthesis method. The AMPX and SCALE code packages have been significantly improved to include intermediate resonance parameters, as well as new modules to enhance the accuracy of resonance data and scattering matrices for the Bondarenko approach and transport cross sections of hydrogen. In addition, CASL XSTools have been developed to generate the MPACT multigroup cross section library. A simple super-homogenization method for 238U has been developed to resolve reaction rate discrepancy issues caused by angle-dependent total cross sections, poor scattering matrices, and a poor resonance interference model at coarse group structure. Here, due to the limitation of computing capacity that can occur even in high performance computing, a new 51-group structure has been developed for efficient simulation that is applicable for both pressurized water reactor (PWR) and boiling water reactor (BWR) simulations. A new ENDF/B-VII.1 MPACT 51-group library has been developed using the AMPX/SCALE and XSTools code packages, and it has been verified and validated by performing various benchmark calculations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

Time series anomaly detection in power electronics signals with recurrent and ConvLSTM autoencoders

The anomalies in the high voltage converter modulator (HVCM) remain a major down time for the spallation neutron source facility, that delivers the most intense neutron beam in the world for scientific materials research. In this work, we propose neural network architectures based on Recurrent AutoEncoders (RAE) to detect anomalies ahead of time in the power signals coming from the HVCM. Bi-directional gated recurrent unit, bi-directional long-short term memory (LSTM), and convolutional LSTM (ConvLSTM) are developed, trained, and tested using real experimental signals from the HVCM module. The results show a good performance of the proposed RAE models, achieving precision up to 91%, recall up to 88%, false omission rate as low as 20% (i.e. 80% of the anomalies were detected), and area under the ROC curve up to 0.9. The three RAE models provide very comparable performance, with LSTM showing slightly better performance than GRU and ConvLSTM. The RAE models are benchmarked against other anomaly detection methods, including isolation forest, support vector machine, local outlier factor, feedforward and convolutional autoencoders, and others; showing a better performance. Here, the results of this study demonstrate the promising potential of RAE in anomaly detection for real-world power systems, and for increasing the reliability of the HVCM modules in the spallation neutron source.

42 ENGINEERING↗

DOE OSTI2017

Cost of power or power of cost: A U.S. modeling perspective

Future scenarios and assessment studies used to prepare for long-term energy transitions and develop robust strategies to address climate change are highly dependent on the assessment of technology characteristics and availability. The electric power sector in the United States recently experienced a significant cost escalation: e.g. construction costs for large plants such as nuclear and coal-fired power plants doubled between 2003 and 2007. In this work, we assess the main drivers of this escalation. While many factors have affected costs, some of the most significant include cost of materials, particularly the price of metals and to a lesser extent cement, possible increases in labor quantity requirements, the aggressive worldwide competition for power plant design and construction resources, driven by high demand in Asia, regulatory tightening, and general uncertainty about future regulations and climate policies. We recalibrate power sector technology costs in the Global Change Assessment Model (GCAM) based on an extensive literature review of recent (post-2010) studies and in the process develop a coherent and updated set of current cost and performance assumptions for all major electricity-generating technologies. While current cost and performance assumptions of electricity-generating technologies are key drivers of short-term technology deployment and technology mix in the electricity sector, medium- and long-term deployment pathways are significantly affected by assumed efficiency improvement rates and cost reductions. Furthermore, we develop and demonstrate a method to forecast efficiency and construction cost of power plants and a sensitivity analysis to explore the importance of such assumptions in future scenarios generated by GCAM.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2016

Synthesis of chitosan supported palladium nanoparticles and its catalytic activity towards 2-nitrophenol reduction

Chitosan supported Palladium nanoparticles were synthesized by a simple cost effective chemical reduction method using NaBH{sub 4}. The prepared nanocomposite was characterized by X-Ray diffraction analysis, FESEM and Energy dispersive spectroscopy analysis of X-rays (EDAX). The catalytic performance of the nanocomposite was evaluated on the reduction of 2-Nitrophenol to the 2-Amino phenol with rate constant 1.08 × 10{sup −3} S{sup −1} by NaBH{sub 4} using Spectrophotometer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2025

Ionization effects in single-shot carrier-envelope phase detection with gas-gap devices

The carrier-envelope phase (CEP) is a key parameter for attosecond waveform control of ultrashort laser pulses. For laser systems with high repetition rates, however, single-shot CEP detection is still challenging. Building on recent findings on phase detection with electric current generation in gases, we show that with an optimized detection method, a long-term stable single-shot phase detection is feasible. We investigate the achievable performance depending on various parameters such as pulse duration, gas pressure, or incident intensity. The latter exhibits a regime where the saturation of the ionization process boosts the phase sensitivity of the signal, which is elucidated by numerical calculations.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Meta-uncertainty for particle image velocimetry

Uncertainty quantification for Particle Image Velocimetry (PIV) is critical for comparing experimentally measured flow fields with Computational Fluid Dynamics (CFD) results, and model design and validation. However, PIV features a complex measurement chain with coupled, non-linear error sources, and quantifying the uncertainty is challenging. Multiple assessments show that none of the current methods can reliably measure the actual uncertainty across a wide range of experiments, and estimates can vary. Because the current methods differ in assumptions regarding the measurement process and calculation procedures, it is not clear which method is best to use for an experiment where the error distribution is unknown. To address this issue, we propose a method to estimate an uncertainty method's sensitivity and reliability, termed the Meta-Uncertainty. The novel approach is automated, local, and instantaneous, and based on perturbation of the recorded particle images. We developed an image perturbation scheme based on adding random unmatched particles to the interrogation window pair considering the signal-to-noise (SNR) of the correlation plane. Each uncertainty scheme's response to several trials of random particle addition is used to estimate a reliability metric, defined as the rate of change of the inter-quartile range (IQR) of the uncertainties with increasing levels of particle addition. We also propose applying the meta-uncertainty as a weighting metric to combine uncertainty estimates from individual schemes, based on ideas from the consensus forecasting literature. We use planar and stereo PIV measurements across a range of canonical flows to assess the performance of the uncertainty schemes. Further, a novel method is introduced to assess an uncertainty scheme's performance based on a quantile comparison of the error and uncertainty distributions, generalizing the current method of comparing the RMS of the two distributions. Here, the results show that the combined uncertainty method outperforms the individual methods, and this work establishes the meta-uncertainty as a useful reliability assessment tool for PIV uncertainty quantification.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

THERMAL SAFETY MARGIN CALCULATION OF THE MP-2 EXPERIMENT IN THE ADVANCED TEST REACTOR

The Mini-Plate 2 (MP-2) irradiation test is a fueled experiment designed for irradiation in multiple test locations in the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL). The experiment is a drop-in test where small aluminum-clad fuel plate samples (mini plates) are cooled directly by the ATR Primary Coolant System (PCS) water. The MP-2 fuel plate experiment will be irradiated in several different irradiation locations of the ATR. This fueled experiment contains aluminum-clad fuel mini plates consisting of monolithic U-Mo. Four different types of fuel plates with fuel meat thickness and cladding are part of the MP-2 test. A thermal analysis has been performed on the MP-2 experiment. A method for calculating Departure from Nucleate Boiling Ratio (DNBR) and Flow Instability Ratio (FIR) during a reactivity transient using the commercial finite element and heat transfer code ABAQUS is discussed. At the start of an ATR cycle the heat generation rate of the fueled experiment is high and the heat rate multiplier from the outer shim control cylinders is low, while the reverse is true at the end of the ATR cycle. Thermal analyses at 10 day increments during the cycle calculate the DNBR and FIR during a reactivity transient. This technique calculates DNBR for the fuel plate surfaces and FIR for all water components for each finite element surface and node at various times during the ATR cycle. Heat rates vary with time during the transient calculation that are provided by a detailed physics analysis. Oxide growth on the fuel plates is also incorporated Results from the transient calculations are displayed with the ABAQUS post processor. By calculating these parameters at each location in the finite element model, conservatism is replaced with accuracy. This allows for a greater margin for the thermal hydraulic safety parameters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Demonstration of neutron identification in neutrino interactions in the MicroBooNE liquid argon time projection chamber

A significant challenge in measurements of neutrino oscillations is reconstructing the incoming neutrino energies. While modern fully-active tracking calorimeters such as liquid argon time projection chambers in principle allow the measurement of all final state particles above some detection threshold, undetected neutrons remain a considerable source of missing energy with little to no data constraining their production rates and kinematics. We present the first demonstration of tagging neutrino-induced neutrons in liquid argon time projection chambers using secondary protons emitted from neutron-argon interactions in the MicroBooNE detector. We describe the method developed to identify neutrino-induced neutrons and demonstrate its performance using neutrons produced in muon-neutrino charged current interactions. The method is validated using a small subset of MicroBooNE’s total dataset. The selection yields a sample with 60% of selected tracks corresponding to neutron-induced secondary protons. At this purity, the integrated efficiency is 8.4% for neutrons that produce a detectable proton.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗