Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Characterization of hydrogen-plasma interactions with photoresist, silicon, and silicon nitride surfaces

For the 45 nm technology node and beyond, a major challenge is to achieve reasonably high photoresist ash rates while minimizing the loss of the silicon (Si) substrate and its nitride (Si{sub 3}N{sub 4}). Accordingly, an objective of this work is to characterize the photoresist strip rate under varying conditions of H{sub 2} plasma and the effects of these conditions on Si and Si{sub 3}N{sub 4} etch rates. In addition, we discuss in detail the fundamental mechanisms of the reactions between H atoms and the above substrates and successfully reconcile the process trends obtained with the reaction mechanisms. In this work, photoresist, Si, and Si{sub 3}N{sub 4} films were exposed to downstream pure-H{sub 2} discharges and their removal rates were characterized by ellipsometry as a function of the following parameters: substrate temperature, reactor pressure, H{sub 2} flow rate, and source power. The authors found that the H{sub 2}-based dry ash and Si{sub 3}N{sub 4} etch are both thermally activated reactions, evidenced by the steady increase in etch rate as a function of temperature, with activation energies of {approx}5.0 and {approx}2.7 kcal/mol, respectively. The Si substrate exhibits a rather unique behavior where the etch rate increases initially to a maximum, which occurs at {approx}40 deg. C, and then decreases upon a further increase in temperature. The decrease in the Si etch rate at higher temperatures is attributed to the activation of competing side reactions that consume the chemisorbed H atoms on the Si surface, which then suppresses the Si-etch step. The photoresist and Si{sub 3}N{sub 4} removal rates increase initially with increasing pressure, reaching maxima at {approx}800 and 2000 mTorr, respectively, beyond which the removal rates drop with increasing pressure. The initial increase in removal rate at the low-pressure regime is attributed to the increased atomic-hydrogen density, whereas the decrease in ash rate at the high-pressure regime could be attributed to the recombination of H atoms that could occur by various mechanisms. At temperatures where the reaction rates are relatively fast, the photoresist and Si removal rates both increase continuously with the H{sub 2} flow rate, indicating that both reactions are in the supply-limited regime. For the range of process conditions explored here, we find that the etch rates of Si are generally much higher than those for Si{sub 3}N{sub 4} with Si:Si{sub 3}N{sub 4} etch-rate ratios that vary from 25 to >>520. Based on the process trends obtained here, we have identified a process window--high temperature and intermediate pressure--that attains relatively high photoresist ash rates and low Si and Si{sub 3}N{sub 4} etch rates.

36 MATERIALS SCIENCE↗

Mechanism of instantaneous coal outbursts

Thousands of mine workers die every year from mining accidents, and instantaneous coal outbursts in underground coal mines are one of the major killers. Various models for these outbursts have been proposed, but the precise mechanism is still unknown. We hypothesize that the mechanism of coal outbursts is similar to magma fragmentation during explosive volcanic eruptions; i.e., it is caused by high gas pressure inside coal but low ambient pressure on it, breaking coal into pieces and releasing the high-pressure gas in a shock wave. Hence, coal outbursts may be regarded as another type of gas-driven eruption, in addition to explosive volcanic, lake, and possible ocean eruptions. We verify the hypothesis by experiments using a shock-tube apparatus. Knowing the mechanism of coal outbursts is the first step in developing prediction and mitigation measures. The new concept of gas-driven solid eruption is also important to a better understanding of salt-gas outbursts, rock-gas outbursts, and mud volcano eruptions.

01 COAL, LIGNITE, AND PEAT↗

Effect of solid-phase amorphization on the spectral characteristics of europium-doped gadolinium molybdate

A method is proposed for detecting spectral characteristics of optically inactive molybdates of rare-earth elements by their doping with rare-earth ions whose luminescence lies in the transparency region of all structural modifications of the sample. Gadolinium molybdate is chosen as the object of investigations, while europium ions are used as an optically active and structurally sensitive admixture. It is shown that after the action of a high pressure under which gadolinium molybdate passes to the amorphous state, the spectral characteristics of Gd{sub 1.99}Eu{sub 0.01}(MoO{sub 4}){sub 3} (GMO:Eu) change radically; namely, considerable line broadening is observed in the luminescence spectra and the luminescence excitation spectra, while the long-wave threshold of optical absorption is shifted considerably (by approximately 1.1 eV) towards lower energies. It is found that by changing the structural state of GMO:Eu by solid-state amorphization followed by annealing, the spectral characteristics of the sample can be purposefully changed. This is extremely important for solving the urgent problem of designing high-efficiency light-emitting diodes producing 'white' light.

36 MATERIALS SCIENCE↗

Effect of pressure on the magnetic properties of lanthanum manganite

The crystalline structure of pure lanthanum manganite under external hydrostatic pressure has been studied. The behavior of magnetic properties and nuclear magnetic resonance (NMR) spectra under these conditions is theoretically predicted. It is shown that an increase in the Neel temperature with pressure is not only caused by the general contraction of the crystal, but is also related to certain peculiarities in the baric behavior of the orbital structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of solid cyclohexane in orientationally ordered and disordered phases

Thermal conductivity {Lambda}{sub P} of solid cyclohexane is measured at a pressure P = 0.1 MPa in the temperature range from 80 K to the melting point, which covers the ranges of low-temperature orientationally ordered phase II and high-temperature orientationally disordered phase I. Thermal conductivity {Lambda}{sub V} is measured at a constant volume in orientationally disordered phase I. The thermal conductivity measured at atmospheric pressure decreases with increasing temperature as {Lambda}{sub P} {proportional_to} T{sup -1.15} in phase II, whereas {Lambda}{sub P} {proportional_to} T{sup -0.3} in phase I. As temperature increases, isochoric thermal conductivity {Lambda}{sub V} in phase I increases gradually. The experimental data are described in terms of a modified Debye model of thermal conductivity with allowance for heat transfer by both phonons and 'diffuse' modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Melting and lattice dynamics of sodium at high pressures. Ab initio quantum molecular-dynamics analysis

The melting and lattice dynamics of sodium are studied by quantum molecular dynamics simulation, i.e., with allowance for anharmonicity, at pressures up to 1 Mbar and temperatures up to 1000 K. The simulation results agree well with the experimental data and our earlier calculation performed ab initio in the quasi-harmonic approximation. The simulation results demonstrate that anharmonic interactions weakly affect the melting curve and the phonon frequencies of Na up to near-melting temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic constants of solids at high pressures

The isothermal and adiabatic nth-order (n {>=} 2) elastic constants of a loaded crystal are defined. These constants fully determine the behavior of solids at an arbitrary load and are controlled by both an interatomic interaction and an applied load. Expressions that relate these constants (of the second, third, and fourth order) to Brugger elastic constants of the corresponding order, which are only determined by an inter-atomic interaction, are found for cubic symmetry crystals under hydrostatic pressure. These expressions are used to calculate the equation of state and the second- and third-order elastic constants of bcc tantalum at T = 0 K over a wide pressure range (0-600 GPa) using an electron density functional method. The results of calculating the equation of state and the second-order elastic constants agree with available experimental data and the calculation results obtained in other works.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure- and temperature-induced transformations in crystalline polymers of C{sub 60}

The great advantage of the C{sub 60} molecule is its potential for polymerization, due to which the molecule can be the building block of new all carbon materials. In addition, it contains, both sp{sup 2} and sp{sup 3} hybridized carbon atoms, which allows synthesizing new carbon materials with desired physicochemical properties using both types of carbon bonding. The one- and two-dimensional polymeric phases of C{sub 60} are prototype materials of this sort. Their properties, especially polymerization under pressure and room temperature via covalent bonding between molecules belonging to adjacent polymeric chains or polymeric layers, can be used for further development of new materials. The present review focuses on the study of the pressure-induced polymerization and thermodynamic stability of these materials and their recovered new phases by in-situ high-pressure Raman and X-ray diffraction studies. The phonon spectra show that the fullerene molecular cage in the high-pressure phases is preserved, while these polymers decompose under heat treatment into the initial fullerene C{sub 60} monomer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Specific features of insulator-metal transitions under high pressure in crystals with spin crossovers of 3d ions in tetrahedral environment

For Mott insulators with tetrahedral environment, the effective Hubbard parameter U{sub eff} is obtained as a function of pressure. This function is not universal. For crystals with d{sup 5} configuration, the spin crossover suppresses electron correlations, while for d{sup 4} configurations, the parameter U{sub eff} increases after a spin crossover. For d{sup 2} and d{sup 7} configurations, U{sub eff} increases with pressure in the high-spin (HS) state and is saturated after the spin crossover. Characteristic features of the insulator-metal transition are considered as pressure increases; it is shown that there may exist cascades of several transitions for various configurations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculation of the thermodynamic parameters and the degree of ionization of argon at sonoluminescence

The results of the numerical simulation of the behavior of a system consisting a spherical bubble filled with gaseous argon and surrounded by water under the impact of an external periodic pressure are presented. It is shown that, under typical conditions for the experimental investigation of single-bubble sonoluminescence in such a system, conditions are created for its thermal ionization near the time instant of the maximum compression in the gas. This proves one of the main provisions of the polarization model of sonoluminescence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-dimensional electrodynamic structure of the normal glow discharge in an axial magnetic field

Results are presented from numerical simulations of an axisymmetric normal glow discharge in molecular hydrogen and molecular nitrogen in an axial magnetic field. The charged particle densities and averaged azimuthal rotation velocities of electrons and ions are studied as functions of the gas pressure in the range of 1–5 Torr, electric field strength in the range of 100–600 V/cm, and magnetic field in the range of 0.01–0.3 T. It is found that the axial magnetic field does not disturb the normal current density law.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of Air Pressure on Parameters of Beam Current and X-Ray Radiation Generated in a Gas Diode

Parameters of a beam of runaway electrons and X-ray radiation generated in a gas diode at different atmospheric pressures are studied. It is shown that the maximum beam currents and intensities of X-ray radiation are generated at an air pressure of about 10{sup 2} Pa. Distribution of beam electrons with respect to energy is determined by the method of attenuation of beam current using aluminum filters with different thicknesses. The maximum of such a distribution corresponds to an electron energy of about 100 keV. The maximum exposure dose of X-ray radiation behind a copper-foil anode with a thickness of 30 μm is about 107 mR. It is shown that the beam electrons absorbed by elements of an X-ray detector affect the shape and amplitude of the desired signal at beam currents of greater than 35 A/cm{sup 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Properties of a Ceramic Pyroelectric X-Ray Generator as Dependent on Residual-Gas Pressure

The properties of X-ray emission from a pyroelectric accelerator based on ferroelectric ceramics have been experimentally studied, including the maximum energy of X-ray photons and their maximum yield generated by accelerated electrons at various pressures of residual gas in the generator chamber. The maximum X-ray yield and maximum energy of X-ray photons and accelerated electrons have been observed at a residual-gas pressure of around several millitorr.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TOUGHREACT (TREACT) v3.32

TOUGHREACT V3.32 is a 3-D reactive transport code that handles to non-isothermal, multiphase/multicomponent fluid flow, heat transport, aqueous and gaseous species advection-diffusion, and equilibrium/kinetic water-gas-rock-biological reactions. TOUGHREACT V3.32 is based on TOUGHREACT V3.0-OMP, with several new features including temperature and species-dependent aqueous species diffusion coefficients, addition of the EWASG EOS module, a new generalized Monod kinetics function, time-dependent pressure-temperature boundary conditions, new VisIt-compatible tecplot-format output files (with new flux and velocity vector component outputs), new input and output options, and improved global water mass balance and coupling between flow, transport and reactive chemistry.

Sonnenthal, Eric↗

Foam Delivery of Amendments for Vadose Zone Remediation – Propagation Performance in Unsaturated Sediments

Foam delivery of remedial amendments is potentially useful for vadose zone remediation because aqueous amendments are delivered while maintaining a low water content. The transport behavior of foam in the vadose zone is not well studied. Bench top scale column tests were conducted to investigate the foam transport, foaming gas and liquid propagation, pressure build up and distribution, influence of foam quality and sediment permeability on foam injection pressure, and liquid up-taking and distribution in sediments during foam flow in unsaturated sediments. Results indicated that under the unsaturated conditions, foaming gas front traveled much faster than the foam front where bubbles rupture was significant. A liquid front was formed ahead of the foam flow front. The accumulated liquid in this front was mainly composed of the water injected with foam. The foam injection pressure was mostly attributed to the resistance to foam flow from the sediment, but not to the movement of the water ahead of the foam front. Foam had a high effective viscosity compare to water. A near linear pressure distribution within the foam-occupied column section was observed. At fixed injection rate, higher foam quality resulted lower injection pressure. Higher permeability sediments did not necessarily have a lower foam injection pressure, as other factors such as the foam injection rate, foam bubble diameter, and sediment pore size also influenced the pressure. In the foam flushed region, the liquid uptake and the water content distribution in sediment was barely affected by the initial water content and the foam injection rate. The implications of these findings in field remediation application were discussed.

54 ENVIRONMENTAL SCIENCES↗

Toward a predictive understanding of low emission fuel-flexible distributed energy turbine systems.

Using hydrogen derived from coal in power generation is one of the potential strategies being considered for eliminating CO2 emissions from combustion. In a two-stage gas combustor, injection of hydrogen into a secondary combustor provides an effective means for achieving a wide range of power settings. However, when additional hydrogen is injected into the exit stream of the first stage turbine, the mixture may autoignite. This uncontrolled autoignition event is undesirable as it leads to strong acoustic waves and high levels of nitrogen oxides (NOx). Since hydrogen was not a main fuel in the past, studies of hydrogen combustion under gas turbine environments have not been extensively carried out. Autoignition of hydrogen depends on pressure in a nonlinear fashion and is sensitive to the unique transport properties of the small hydrogen molecules, making prediction of autoignition a very challenging task. For both steady and transient flames, Large Eddy Simulation (LES) is essential for obtaining a fundamental understanding of flame stability mechanisms. As such, this work performs a LES study aimed at modeling and understanding 1) key stability mechanism(s) related to flame propagation and/or autoignition, and 2) the effect of pressure on hydrogen combustion over the range of 1 to 20 bar.

Defilippo, Anthony↗

Calibrating the Abaqus Crushable Foam Material Model using UNM Data

Triaxial test data from the University of New Mexico and uniaxial test data from W-14 is used to calibrate the Abaqus crushable foam material model to represent the syntactic foam comprised of APO-BMI matrix and carbon microballoons used in the W76. The material model is an elasto-plasticity model in which the yield strength depends on pressure. Both the elastic properties and the yield stress are estimated by fitting a line to the elastic region of each test response. The model parameters are fit to the data (in a non-rigorous way) to provide both a conservative and not-conservative material model. The model is verified to perform as intended by comparing the values of pressure and shear stress at yield, as well as the shear and volumetric stress-strain response, to the test data.

36 MATERIALS SCIENCE↗

Impact of axial velocity and transmembrane pressure (TMP) on ARP filter performance

The Savannah River Site (SRS) is currently treating radioactive liquid waste with the Actinide Removal Process (ARP) and the Modular Caustic Side Solvent Extraction Unit (MCU). Recently, the low filter flux through the ARP of approximately 5 gallons per minute has limited the rate at which radioactive liquid waste can be treated. Salt Batch 6 had a lower processing rate and required frequent filter cleaning. Savannah River Remediation (SRR) has a desire to understand the causes of the low filter flux and to increase ARP/MCU throughput. One potential method for increasing filter flux is to adjust the axial velocity and transmembrane pressure (TMP). SRR requested SRNL to conduct bench-scale filter tests to evaluate the effects of axial velocity and transmembrane pressure on crossflow filter flux. The objective of the testing was to determine whether increasing the axial velocity at the ARP could produce a significant increase in filter flux. The authors conducted the tests by preparing slurries containing 6.6 M sodium Salt Batch 6 supernate and 2.5 g MST/L, processing the slurry through a bench-scale crossflow filter unit at varying axial velocity and TMP, and measuring filter flux as a function of time.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗