Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Organic LED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

A study of the conformational isomerism of 1-iodobutane by high resolution rotational spectroscopy

The first microwave study of 1-iodobutane, performed by Steinmetz et al.in 1977) led to the determination of the B + C parameter for the anti-anti­and gauche-anti-conformers. Nearly 40 years later, this reinvestigation of 1- iodobutane, by high-resolution microwave spectroscopy, led to the determina­tion of rotational constants, centrifugal distortion constants, nuclear quadrupole coupling constants (NQCCs), and nuclear-sp rotation constants belonging to both of the two previously mentioned conformers, in addition to the gauche­ gauche-conformer, which was observed in this frequency regime for the first time. Comparisons between the three conformers of 1-iodobutanc and other iodo- and bromoalkanes are made, specifically through an analysis of the nuclear quadrupole coupling constants belonging to the iodine and bromine atoms in the respective chemical environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescence properties of a blue-emitting phosphor: (Sr{sub 1−x}Eu{sub x})Si{sub 9}Al{sub 19}ON{sub 31} (0<x≤1)

Blue-emitting Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized at 1800 °C for 2 h under 1 MPa N{sub 2} by using the gas-pressure sintering method (GPS). The microstructure, photoluminescence (PL) properties of the prepared phosphors were investigated. Under the 290 nm excitation, broad PL emission bands with peak positions at 448–490 nm were detected. The concentration quenching was not observed owing to the large distance betweenEu{sup 2+} ions that made the nonradiative energy transfer between neighboring Eu{sup 2+} ions difficult. The blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation, respectively. The interesting PL results indicate that Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} has great potentials as a blue phosphor for white LEDs applications. - Graphical abstract: Sr{sub 0.7}Eu{sub 0.3}Si{sub 9}Al{sub 19}ON{sub 31} gives blue-emitting at 471 nm. Excitation spectrum is composed of five bands in the range of 250–450 nm, which are matching well with emission wavelength of UV LEDs. Display Omitted - Highlights: • Blue-emitting Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized by gas-pressure sintering method. • The concentration quenching was not observed in this phosphor. • This blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. • The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amplifying Nanoparticle Reinforcement through Low Volume Topologically Controlled Chemical Coupling

Here, we present a streamlined method to covalently bond hydroxylated carbon nanotubes (CNOH) within a polyphenol matrix, all achieved through a direct, solvent-free process. Employing an extremely small concentration of CNOH (0.01% w/w) along with topologically contrasting linkers led to a maximum of 5-fold increase in modulus and a 25% enhancement in tensile strength compared to the unaltered matrix, an order of magnitude greater reinforcement (w/w) compared to state-of-the-art melt-processed nanocomposites. Through dynamic mechanical analysis, low field solid-state nuclear magnetic resonance spectroscopy, and molecular dynamics simulations, we uncovered the profound influence of linker’s conformational degrees of freedom on the segmental dynamics and therefore the material’s properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

N- and S-doped mesoporous carbon as metal-free cathode catalysts for direct biorenewable alcohol fuel cells

Nitrogen and sulfur were simultaneously doped into the framework of mesoporous CMK-3 as metal-free catalysts for direct biorenewable alcohol fuel cells. Glucose, NH 3 , and thiophene were used as carbon, nitrogen and sulfur precursors, respectively, to prepare mesoporous N-S-CMK-3 with uniform mesopores and extra macropores, resulting in good O 2 diffusion both in half cell and alcohol fuel cell investigations. Among all investigated CMK-3 based catalysts, N-S-CMK-3 prepared at 800 °C exhibited the highest ORR activity with the onset potential of 0.92 V vs. RHE, Tafel slope of 68 mV dec -1 , and 3.96 electron transfer number per oxygen molecule in 0.1 M KOH. In addition, the alkaline membrane-based direct alcohol fuel cell (DAFC) with N-S-CMK-3 cathode displayed 88.2 mW cm -2 peak power density without obvious O 2 diffusion issue, reaching 84% initial performance of that with a Pt/C cathode. The high catalyst durability and fuel-crossover tolerance led to stable performance of the N-S-CMK-3 cathode DAFC with 90.6 mW cm -2 peak power density after 2 h operation, while the Pt/C cathode-based DAFC lost 36.9% of its peak power density. In conclusion, the high ORR activity of N-S-CMK-3 can be attributed to the synergistic effect between graphitic-N and S (C–S–C structure), suggesting great potential to use N-S-CMK-3 as an alternative to noble metal catalysts in the fuel cell cathode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exact Kohn-Sham potential of strongly correlated finite systems

The dissociation of molecules, even the most simple hydrogen molecule, cannot be described accurately within density functional theory because none of the currently available functionals accounts for strong on-site correlation. This problem led to a discussion of properties that the local Kohn-Sham potential has to satisfy in order to correctly describe strongly correlated systems. We derive an analytic expression for the nontrivial form of the Kohn-Sham potential in between the two fragments for the dissociation of a single bond. We show that the numerical calculations for a one-dimensional two-electron model system indeed approach and reach this limit. It is shown that the functional form of the potential is universal, i.e., independent of the details of the two fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Activation of the CaR-CSE/H2S pathway confers cardioprotection against ischemia-reperfusion injury

Ischemia-reperfusion (I/R) injury is a multifactorial process triggered when an organ is subjected to transiently reduced blood supply. The result is a cascade of pathological complications and organ damage due to the production of reactive oxygen species following reperfusion. The present study aims to evaluate the role of activated calcium-sensing receptor (CaR)-cystathionine γ-lyase (CSE)/hydrogen sulfide (H2S) pathway in I/R injury. Firstly, an I/R rat model with CSE knockout was constructed. Transthoracic echocardiography, TTC and HE staining were performed to determine the cardiac function of rats following I/R Injury, followed by TUNEL staining observation on apoptosis. Besides, with the attempt to better elucidate how CaR-CSE/H2S affects I/R, in-vitro culture of human coronary artery endothelial cells (HCAECs) was conducted with gadolinium chloride (GdCl3, a CaR agonist), H{sub 2}O{sub 2}, siRNA against CSE (siCSE), or W7 (a CaM inhibitor). The interaction between CSE and CaM was subsequently detected. Plasma oxidative stress indexes, H2S and CSE, and apoptosis-related proteins were all analyzed following cell apoptosis. We found that H2S elevation led to the improvement whereas CSE knockdown decreased cardiac function in rats with I/R injury. Moreover, oxidative stress injury in I/R rats with CSE knockout was aggravated, while the increased expression of H2S and CSE in the aortic tissues resulted in alleviated the oxidative stress injury. Moreover, increased H2S and CSE levels were found to inhibit cell apoptotic ability in the aortic tissues after I/R injury, thus attenuating oxidative stress injury, accompanied by inhibited expression of apoptosis-related proteins. In HCAECs following oxidative stress treatment, siCSE and CaM inhibitor were observed to reverse the protection of CaR agonist. Coimmunoprecipitation assay revealed the interaction between CSE and CaM. Taken together, all above-mentioned data provides evidence that activation of the CaR-CSE/H2S pathway may confer a potent protective effect in cardiac I/R injury.

60 APPLIED LIFE SCIENCES↗

Cadmium inhibits the protein degradation of Sml1 by inhibiting the phosphorylation of Sml1 in Saccharomyces cerevisiae

Highlights: Black-Right-Pointing-Pointer Cd inhibits Sml1-p formation. Black-Right-Pointing-Pointer Cd affects cell cycle. Black-Right-Pointing-Pointer Cd inhibits Sml1 ubiquitination. -- Abstract: Cadmium is a toxic metal, and the mechanism of cadmium toxicity in living organisms has been well studied. Here, we used Saccharomyces cerevisiae as a model system to examine the detailed molecular mechanism of cell growth defects caused by cadmium. Using a plate assay of a yeast deletion mutant collection, we found that deletion of SML1, which encodes an inhibitor of Rnr1, resulted in cadmium resistance. Sml1 protein levels increased when cells were treated with cadmium, even though the mRNA levels of SML1 remained unchanged. Using northern and western blot analyses, we found that cadmium inhibited Sml1 degradation by inhibiting Sml1 phosphorylation. Sml1 protein levels increased when cells were treated with cadmium due to disruption of the dependent protein degradation pathway. Furthermore, cadmium promoted cell cycle progression into the G2 phase. The same result was obtained using cells in which SML1 was overexpressed. Deletion of SML1 delayed cell cycle progression. These results are consistent with Sml1 accumulation and with growth defects caused by cadmium stress. Interestingly, although cadmium treatment led to increase Sml1 levels, intracellular dNTP levels also increased because of Rnr3 upregulation due to cadmium stress. Taken together, these results suggest that cadmium specifically affects the phosphorylation of Sml1 and that Sml1 accumulates in cells.

60 APPLIED LIFE SCIENCES↗

Discovery of 3-morpholino-imidazole[1,5- a ]pyrazine BTK inhibitors for rheumatoid arthritis

8-Amino-imidazo[1,5-a]pyrazine-based Bruton’s tyrosine kinase (BTK) inhibitors, such as 6, exhibited potent inhibition of BTK but required improvements in both kinase and hERG selectivity (Liu et al., 2016; Gao et al., 2017). In an effort to maintain the inhibitory activity of these analogs and improve their selectivity profiles, we carried out SAR exploration of groups at the 3-position of pyrazine compound 6. This effort led to the discovery of the morpholine group as an optimized pharmacophore. Compounds 13, 23 and 38 displayed excellent BTK potencies, kinase and hERG selectivities, and pharmacokinetic profiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of human health risk associated with methylmercury in the imported fish marketed in the Caribbean

Highlights: • Levels of Hg species in the most popular imported fish were studied in Colombia. • Mean concentrations do not exceeded the maximum levels of Hg permitted in fish. • The estimated weekly intakes suggest that children should not eat any can of tuna. • Pregnant woman should eat no more than 2 cans of tuna per week (one can from brand D). The decline in marine and freshwaters catches in recent years in Colombia has led to a change in dietary habits, with an increase in the purchase and consumption of imported fish. This is of particular concern as fish are sometimes caught in mercury-contaminated waters, and are subsequently sold canned or uncanned. In addition, canned tuna has received little attention as it is widely assumed that concentrations are low. In this study, total mercury (THg) and methylmercury (MeHg) concentrations were evaluated in three imported fish species marketed in Colombia, Prochilodus lineatus, Prochilodus reticulatus, and Pangasianodon hypophthalmus, plus four brands of canned tuna and one of sardines. One brand of tuna showed the highest mean concentrations of THg (0.543 ± 0.237 μg/g, wet weight, ww) and MeHg (0.518 ± 0.337 μg/g ww), while concentrations in P. hypophthalmus were approximately 30 times lower (≈0.02 µg/g ww). The estimated weekly intake (EWI) in children was above the provisional tolerable weekly intake (PTWI) of MeHg established by the Joint FAO/World Health Organization (WHO) Expert Committee on Food Additives (JECFA) in 2007, 1.6 μg/kg body weight (bw) per week, for all the canned tuna brands. Values for adults were below PTWI, whereas for women of childbearing age, values were above PTWI only for brand D of canned tuna. The estimate of the potential risk indicated that MeHg levels in canned tuna can generate negative effects in vulnerable groups, while the EWI of fresh fish did not pose a threat to the general population. Therefore, establishing strategies to address the high consumption of canned tuna, and continuous monitoring to control commercial food, are recommended to decrease Hg exposure.

54 ENVIRONMENTAL SCIENCES↗

Engineering Two-Phase and Three-Phase Microstructures from Water-Based Dispersions of Nanoparticles for Eco-Friendly Polymer Solar Cell Applications

Nanoparticle organic photovoltaics, a subfield of organic photovoltaics (OPV), has attracted increasing interest in recent years due to the eco-friendly fabrication of solar modules afforded by colloidal ink technology. Importantly, using this approach it is now possible to engineer the microstructure of the light absorbing/charge generating layer of organic photovoltaics; decoupling film morphology from film deposition. In this study, single-component nanoparticles of poly(3-hexylthiophene) (P3HT) and phenyl-C 61 butyric acid methyl ester (PC 61 BM) were synthesized and used to generate a two-phase microstructure with control over domain size prior to film deposition. Scanning transmission X-ray microscopy (STXM) and electron microscopy were used to characterize the thin film morphology. Uniquely, the measured microstructure was a direct input for a nanoscopic kinetic Monte Carlo (KMC) model allowing us to assess exciton transport properties that are experimentally inaccessible in these single-component particles. Photoluminescence, UV-vis spectroscopy measurements, and KMC results of the nanoparticle thin films enabled the calculation of an experimental exciton dissociation efficiency (η ED ) of 37% for the two-phase microstructure. The glass transition temperature (T g ) of the materials was characterized with dynamic mechanical thermal analysis (DMTA) and thermal annealing led to an increase in ηED to 64% due to an increase in donor-acceptor interfaces in the thin film from both sintering of neighboring opposite-type particles in addition to the generation of a third mixed phase from diffusion of PC 61 BM into amorphous P3HT domains. Finally, this study demonstrates the higher level of control over donor-acceptor film morphology enabled by customizing nanoparticulate colloidal inks, where the optimal three-phase film morphology for an OPV photoactive layer can be designed and engineered.

36 MATERIALS SCIENCE↗

Protein Assembly by Design

Proteins are nature’s primary building blocks for the construction of sophisticated molecular machines and dynamic materials, ranging from protein complexes such as photosystem II and nitrogenase that drive biogeochemical cycles to cytoskeletal assemblies and muscle fibers for motion. Such natural systems have inspired extensive efforts in the rational design of artificial protein assemblies in the last two decades. As molecular building blocks, proteins are highly complex, in terms of both their three-dimensional structures and chemical compositions. To enable control over the self-assembly of such complex molecules, scientists have devised many creative strategies by combining tools and principles of experimental and computational biophysics, supramolecular chemistry, inorganic chemistry, materials science, and polymer chemistry, among others. Owing to these innovative strategies, what started as a purely structure-building exercise two decades ago has, in short order, led to artificial protein assemblies with unprecedented structures and functions and protein-based materials with unusual properties. Furthermore, our goal in this review is to give an overview of this exciting and highly interdisciplinary area of research, first outlining the design strategies and tools that have been devised for controlling protein self-assembly, then describing the diverse structures of artificial protein assemblies, and finally highlighting the emergent properties and functions of these assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Diversity in the Complexes of Trimeric Perfluoro- o -phenylene Mercury with Tetrathia- and Tetramethyltetraselenafulvalene

Five potential charge transfer complexes of trimeric perfluoro-o-phenylene mercury (I) with tetrathiafulvalene (TTF) and tetramethyltetraselenefulvalene (TMTSF) were grown from different solvent mixtures. The adducts (I)2·TTF (1) and I·TTF (2) were grown by slow evaporation from the 1:1 mixture of dichloromethane (CH 2 Cl 2 , DCM) and carbon disulfide (CS 2 ). Use of the different 1:1 solvent mixtures of dichloromethane (CH 2 Cl 2 , DCM) and dichloroethane (C 2 H 4 Cl 2 , DCE) has led to the crystalline adducts I·TTF (3) and I·TTF·DCE (4). Adduct I.TMTSF (5) was grown by the interface crystallization on the border of two immiscible layers, ethyl acetate, and carbon disulfide. The cocrystals differ by the donor–acceptor ratio, molecular packing, and the solvent inclusion. The components in 1–5 form mixed donor–acceptor stacks. The stacks are stabilized by Hg···S and Hg···C short contacts, while the lateral interactions between stacks include F···F, CH···F, and S/Se···F short contacts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A systematic approach to vertically excited states of ethylene using configuration interaction and coupled cluster techniques

A systematic sequence of configuration interaction and coupled cluster calculations were used to describe selected low-lying singlet and triplet vertically excited states of ethylene with the goal of approaching the all electron, full configuration interaction/complete basis set limit. Included among these is the notoriously difficult, mixed valence/Rydberg {sup 1}B{sub 1u} V state. Techniques included complete active space and iterative natural orbital configuration interaction with large reference spaces which led to variational spaces of 1.8 × 10{sup 9} parameters. Care was taken to avoid unintentionally biasing the results due to the widely recognized sensitivity of the V state to the details of the calculation. The lowest vertical and adiabatic ionization potentials to the {sup 2}B{sub 3u} and {sup 2}B{sub 3} states were also determined. In addition, the heat of formation of twisted ethylene {sup 3}A{sub 1} was obtained from large basis set coupled cluster theory calculations including corrections for core/valence, scalar relativistic and higher order correlation recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Stabilization of P2-type Sodium Iron Manganese Oxides by Electrochemically Inactive Mg Substitution: Insights of Redox Behavior and Voltage Decay

Layered P2-type Na 0.8 Mn 0.5 Fe 0.5 O 2 cathode material is a promising candidate for next-generation sodium-ion batteries due to the economical and environmentally benign characteristics of Mn and Fe. The poor cycling stability of the material, however, is still a problem that must be solved. To address the problem, here, electrochemically inactive Mg 2+ was introduced into the structure by substituting some of the Fe ions. It was shown that Mg substitution led to a smoother voltage profile with improved cycling performance and rate capability. These observations were attributed to the suppressed structural changes during electrochemical processes. Detailed redox mechanisms, associated local structural changes, and phase transitions were investigated by X-ray absorption spectroscopy and X-ray diffraction. From the detailed analysis of electrochemical behaviors, it was also identified how the redox reactions and structural disordering occurred in the high-and low-voltage regions and how Mg substitution stabilized the structure.

25 ENERGY STORAGE↗

Use of a Lewis acid, a Brønsted acid, and their binary mixtures for the hydrothermal liquefaction of lignocellulose

The main objective of the present study is to investigate the effect of a Lewis acid, Brønsted acid, and their combined use on the hydrothermal liquefaction of lignocellulosic biomass. Hydrothermal liquefaction of teak wood was conducted at 250, 300 and 350 °C for 15, 30 and 60 min. Hydrothermal liquefaction of teak wood was carried out at 300 °C for 30 min (the best optimum conditions) without and with the use of Mg(ClO 4 ) 2 , HClO 4 , and HClO 4 /Mg(ClO 4 ) 2 at various loadings (2–10 mmol/15 g wood). The highest bio-oil yield was obtained with the non-catalytic run. All tested catalysts have negative effect on bio-oil yields. The bio-oil yields generally decreased with increasing the catalyst loadings. The deoxygenation degree in bio-oils changed depending on the type of catalyst and loading. A high degree of de-oxygenation took place with Mg(ClO 4 ) 2 catalysts. An increased catalyst loading led to decreased aromatic contents of bio-oils catalyzed by either Mg(ClO 4 ) 2 or HClO 4 . The use of a catalyst increased total naphtha fractions in bio-oils. The highest heating value of the bio-oil was estimated to be approximately 30 MJ/kg. Gas chromatography–mass spectrometry analysis revealed that the bio-oils from the non-catalytic and catalytic runs contained aldehydes, ketones, phenols, acids, esters and alcohols. Furthermore, the relative yields of the oxygenated compounds were affected by catalyst type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of the mechanical–chemical stabilization process for municipal solid waste incinerator fly ash on the chemical reactions in cement paste

Highlights: ► Milling extracted MSWI fly ash. ► Increasing specific surface area, destruction of the crystalline texture, and increasing the amount of amorphous materials. ► Increasing heavy metal stability. ► Inducing pozzolanic reactions and increasing the early and later strength of the cement paste. - Abstract: A water extraction process can remove the soluble salts present in municipal solid waste incinerator (MSWI) fly ash, which will help to increase the stability of the synthetic materials produced from the MSWI fly ash. A milling process can be used to stabilize the heavy metals found in the extracted MSWI fly ash (EA) leading to the formation of a non-hazardous material. This milled extracted MSWI fly ash (MEA) was added to an ordinary Portland cement (OPC) paste to induce pozzolanic reactions. The experimental parameters included the milling time (96 h), water to binder ratios (0.38, 0.45, and 0.55), and curing time (1, 3, 7 and 28 days). The analysis procedures included inductively coupled plasma atomic emission spectroscopy (ICP/AES), BET, mercury intrusion porosimetry (MIP), X-ray diffraction (XRD), and nuclear magnetic resonance (NMR) imaging. The results of the analyses indicate that the milling process helped to stabilize the heavy metals in the MEA, with an increase in the specific surface area of about 50 times over that of OPC. The addition of the MEA to the OPC paste decreased the amount of Ca(OH){sub 2} and led to the generation of calcium–silicate–hydrates (C–S–H) which in turned increased the amount of gel pores and middle sized pores in the cement. Furthermore, a comparison shows an increase in the early and later strength over that of OPC paste without the addition of the milled extracted ash. In other words, the milling process could stabilize the heavy metals in the MEA and had an activating effect on the MEA, allowing it to partly substitute OPC in OPC paste.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Triplet Photosensitized para -Hydrogen Induced Polarization

Despite its enormous utility in structural characterization, nuclear magnetic resonance (NMR) spectroscopy is inherently limited by low spin polarization. One method to address the low polarization is para-hydrogen (p-H 2 ) induced polarization (PHIP) which uses the singlet spin isomer of H 2 to generate disparate nuclear spin populations to amplify the associated NMR signals. PHIP often relies on thermal catalysis or, more infrequently, UV-activated catalytic hydrogenation. Light-activated hydrogenation enables direct and timed control over the hyperpolarization of target substrates, critical for identifying short-lived intermediates. Here, we use an established Ir(III) triplet photosensitizer (PS) to visible light sensitize the triplet ligand-field states in the d6-transition metal dihydride Ru(CO)(PPh 3 ) 3 (H) 2 (1). Excitation inside a 9.4 T NMR spectrometer with the PS and a 420 nm blue LED, under 3 atm of p-H 2 , successfully photosensitized hyperpolarization in 1 and in a range of unsaturated substrates at and below room temperature, up to 1630-fold. In otherwise identical experimental conditions without light activation, no polarization was realized in 1 or the substrates evaluated. We believe triplet-sensitized PHIP (Trip- PHIP) represents a facile experimental means for probing triplet sensitized light activation in transition metal catalysts possessing low-lying triplet ligand-field states, providing mechanistic insight of potentially tremendous value in chemical catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗