Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “N”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

The hitchhiker's guide to 4d $\mathcal{N}=2$ superconformal field theories

Superconformal field theory with \mathcal{N}=2 𝒩 = 2 supersymmetry in four dimensional spacetime provides a prime playground to study strongly coupled phenomena in quantum field theory. Its rigid structure ensures valuable analytic control over non-perturbative effects, yet the theory is still flexible enough to incorporate a large landscape of quantum systems. Here we aim to offer a guidebook to fundamental features of the 4d \mathcal{N}=2 𝒩 = 2 superconformal field theories and basic tools to construct them in string/M-/F-theory. The content is based on a series of lectures at the Quantum Field Theories and Geometry School in July 2020.

Akhond, Mohammad↗

Final Report: Preparation and Evaluation of N-Type CdSeTe and CdTe as an Absorber in Thin Film PV

The primary objective of this project was to demonstrate n-type CdTe and CdSeTe films prepared by in-situ doping methods using pre-doped source material. Our goal was to achieve electron density (>10 17 cm -3 ) and lifetime (>10 ns) in n-type CdTe and CdSeTe films. The focus was on indium as the dopant, as it is suitable for incorporation during melt growth of CdTe. It was thought that indium doped bulk crystals might exhibit self compensation and high resistivity, so post-growth annealing studies were planned to manipulate crystal stoichiometry, defects and electrical activity. Single crystals of CdTe:In and CdSe 0.4 Te 0.6 :In, with target In concentration 10 19 cm -3 , were grown by the vertical Bridgman crystal growth method at Washington State University (WSU). Incorporation of the intended In into the crystals was ~25%-30%, (2.5-3) ×10 18 cm -3 , according to glow discharge mass spectrometry (GDMS). Carrier concentration in CdTe:In crystals were very low until after a Cd anneal, at which point the concentration reached 8 ×10 17 cm -3 (~27% activation) according to Hall effect and time resolved photoluminescence (TRPL). CdSeTe:In, on the other hand, had ~100% carrier activation with no post-growth treatments, resulting in ~3×10 18 cm -3 carriers with a lifetime of 1.5 ns, near the radiative limit for this material.

14 SOLAR ENERGY↗

Absorptive corrections to the forward elastic proton-proton analyzing power A N

In the RHIC Polarized Atomic Hydrogen Gas Jet Target (HJET) measurements of the protonproton analyzing power A N (t), absorptive corrections to the electromagnetic form factor were not considered in the data analysis. Recently, these corrections were evaluated theoretically. However, the results were presented in form of integral expressions which were calculated numerically. In this note, the expressions are simplified to make them more suitable for the HJET data analysis. Possible effect of the absorptive corrections in the A N (t) measurement is discussed.

43 PARTICLE ACCELERATORS↗

Measurement of the 240 Pu(n,f) Prompt Fission Neutron Spectra with Chi-Nu

The DOE Nuclear Criticality Safety Program has funded a multi-year effort to measure the 240 Pu(n,f) Prompt Fission Neutron Spectrum at Chi-Nu. This project is a joint LANL-LLNL effort, involving the preparation of 12 240 Pu foils and construction of a Parallel-Plate Avalanche Counter at LLNL, with subsequent measurements of the 240 Pu(n,f) PFNS at the Chi-Nu beamline at the Los Alamos Neutron Science Center’s Weapons Neutron Research facility (LANSCE/WNR). We expect the PPAC to be ready in time to perform the measurements this run cycle.

240Pu Foils↗

Evaluated 238 U(n,f) Average Prompt Fission Neutron Multiplicities Including the CGMF Model

This report documents an evaluation of the average prompt fission neutron multiplicity, $\overline{v}_p$, of 238 U from 800 keV to MeV. This evaluation had to be re-done from “scratch” as the input to previous $\overline{v}_p$ evaluations, specifically ENDF/B-VIII.0, was not found. That means that all available experimental data were re-analyzed and uncertainties were re-estimated. The new evaluated 238 U $\overline{v}_p$ based on only experimental data differs distinctly from ENDF/B-VIII.0 $\overline{v}_p$ from 2 to 4.5 MeV, and from 6 to 7 MeV, and is otherwise similar. The difference from 2 to 4.5 MeV stems from the fact that ENDF/B-VIII.0 was tweaked in this energy range to data of Frehaut, while two other, equally trustworthy, data sets would indicate an evaluated 238 U $\overline{v}_p$ that is up to 2% higher. Also, second chance fission in ENDF/B-VIII.0 was smoothed over from 6–7 MeV. Another major difference to ENDF/B-VIII.0 is that one of the evaluations presented here includes model information from the Hauser-Feshbach fission fragment decay code CGMF, while ENDF/B-VIII.0 is based purely on experimental data. CGMF links several fission quantities with each other; $\overline{v}_p$ is predicted by assumptions made on, e.g., pre-neutron emission yields as a function of mass, the total kinetic energy, or spin and parity of fission fragments. This allows to validate the new 238 U $\overline{v}_p$ by using CGMF parameters obtained from fitting to experimental 238 U $\overline{v}_p$ to predict yields as a function of mass, the average total kinetic energy, or the mean energy of the prompt fission neutron spectrum. These model-predicted values can then be compared to experimental and evaluated data. The model-predicted fission-observable values using evaluated parameters obtained here are reasonably close to experimental data for some observables, but are farther away from experimental data related to TKE observables. In addition to that, the evaluated 238 U(n,f) $\overline{v}_p$ shows similar deviations from ENDF/B-VIII.0 as for the evaluation with only experimental data. This difference is expected to lead to changes in simulated effective neutron multiplication factor, $k_{eff}$ of ICSBEP critical assemblies that are sensitive to 238 U in the fast range (BigTen, Flattop, Flattop-Pu). These changes in $k_{eff}$ need to be counter-balanced. Chi-Nu PFNS experimental data are expected to be released in the next few months that might lead to the needed changes in the PFNS. Until then, we hold off in benchmarking the new 238 U(n,f) $\overline{v}_p$ as well as submitting it to ENDF/B-VIII.1. Also, new high-precision 238 U $\overline{v}_p$ are expected to be measured by the CEA in the next two years that will shed further light on question on 238 U $\overline{v}_p$ from 2–4.5 and 6–7 MeV.

238U↗

Technical note on 16 O(n,α) evaluation (Rev. 3)

The evaluated 16 O(n,α) cross sections in the ENDF/B-VIII.0 nuclear data library remain uncertain because of systematic discrepancies between measured data. The evaluation relies heavily on the inverse reaction, and, in particular, it relies on the recently measured 13 C(α,n) 16 O cross sections reported by Harissopulos in 2005. These cross section values are systematically lower than those previously reported by Bair in 1973. This technical note briefly describes and shows, on the basis of the available experimental information, that the two sets of measured cross sections are consistent

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Droplet burning of n-butyl acetate/n-heptane mixtures in the standard atmosphere: experiments and numerical modeling

Blending petroleum fuels with oxygenates is a common approach to stem the depletion of crude oil while also mitigating the impact of their combustion on the environment. It has recently been considered that n-butyl acetate (BA, C6H12O2 , boiling point of 399K) could be a viable oxygenate additive to diesel fuel. In this application it is important to determine the influence of the fractional amount of BA on burning of the mixture. This presentation considers this problem from an experimental and computational approach using n-heptane (C7H14 , boiling point of 372K) as an essentially single component surrogate for diesel fuel. The burning configuration considered was ostensibly spherical symmetry as promoted by burning droplets under conditions where forced and natural convection effects were minimized. In this configuration the droplet and flame are concentric spheres and soot aggregates are trapped in a shell structure between the droplet and flame. Measurements were made of the droplet, flame and soot shell diameters through video imaging of the burning process. The experimental results were used to validate a detailed numerical model of the spherically symmetric droplet burning process that incorporated a consistent combustion kinetic mechanism for BA/heptane mixtures, comprised of 402 species and 16,872 reactions inclusive of soot chemistry. A model for soot formation was also included in the simulation to predict formation of the soot shell. The simulations agreed well with measured droplet and flame diameters. It was found both experimentally and computationally that adding BA to heptane had a minimal effect on the mixture burning rate, while the flame was positioned closer to the droplet surface and the simulated soot volume fraction decreased. The implications of these results are discussed for using BA as a potential additive to diesel fuel.

09 BIOMASS FUELS↗

On the combustion of n-butyl acetate droplets

This paper presents an experimental and numerical study of the combustion of isolated n‑butyl acetate droplets in the standard atmosphere. Numerical simulations are reported using a model that incorporates unsteady gas and liquid transport, variable properties, and radiation. Three skeletal mechanisms of n‑butyl acetate, derived from a large detailed mechanism comprised of 819 species and 52,698 reactions, were used in the numerical simulations to evaluate the influence of the kinetic mechanism on burning. The reduced mechanisms comprised 212 species and 5413 reactions, 157 species and 3089 reactions, and 105 species and 1035 reactions. The numerical model did not include soot formation, though qualitatively mild sooting was noted only for droplets larger than 0.7 mm. The numerical predictions were in good agreement with experimental measurements of droplet and flame diameters. Flame extinction was numerically predicted which was attributed to a decrease of the characteristic diffusion time relative to the chemical time as droplet burned. Effects of initial droplet diameter on the evolution of maximum gas temperature (Tmax) and peak mole fractions of CO2 and CO are also examined numerically.

09 BIOMASS FUELS↗

N* Physics with CLAS12 at Jefferson Lab

Nucleons are the most fundamental bound three-body systems in Nature. With the CLAS12 spectrometer at Jefferson Lab, the spectrum and the structure of nucleon resonances is explored. This includes studies of exclusive piN, pi+pi-p, KLambda, and KSigma electroproduction reactions and the evolution of the electrocouplings of resonances with photon virtuality Q^2. Such type of studies with CLAS have revealed a complex interplay between a core of dressed quarks and an external meson-baryon cloud inside of the excited nucleon states. With CLAS12, also measurements of N -> N* transitions in the DIS region have been performed, addressing the three-dimensional structure of nucleon resonances through their transition GPDs (generalized parton distributions). In the future, the increase of the CEBAF energy and the upgrade of the CLAS12 spectrometer to study exclusive electroproduction channels at higher luminosities and photon virtualities will offer a unique opportunity to study the nucleon excitation mechanisms.

Achenbach, Patrick↗

MCNPs Easy Sources for (α,n) (MESA) 1.0: A User’s Guide

MCNPs Easy Sources for Alpha,N (MESA) facilitates the construction of MCNP source definition cards for (α,n) sources. It is a complete re-write of the homogeneous, surface source, and three layer problem types from Sources4c. Please refer to this reference for documentation on the cross-sections and neutron emission spectra. The one departure from Sources4c is the use of alpha energies and activities from the ISC ENDF VII or VIII library specified by the user.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Microbial Analysis of 100-N Borehole Samples: Estimation of Diesel and BTEX Degrading Bacterial Populations

Historical unplanned releases at the UPR-100-N-17 166-N Diesel Oil Supply Line Leak waste site located within the 100-NR-1 OU resulted in diesel fuel contamination of the unsaturated vadose zone and site groundwater. Enhanced in situ bioremediation of the deep vadose zone was the final remedy decision for the 100-NR-1 Operable Unit (OU) and the full-scale bioventing demo began in 2012. For this remedy, oxygen is actively supplied to the deep vadose zone to stimulate aerobic hydrocarbon degrading microorganisms to metabolize petroleum contamination. Degradation rate calculations based on vadose zone respirometry measurements, however, have indicated declining activity over recent years, though the precise reason for this apparent decline has not been determined. In this investigation 100-NR-1 OU sediment cores were analyzed for total microbial biomass, as well as enumeration of diesel and BTEX degrading bacteria to determine if these microbial populations have declined relative to previous measurements taken in 2009.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Exploring the Impact of N Solubility and Trace Elements on the Creep Properties of P92 Steel

Trace elements can have major consequences on the properties of creep resistant martensitic steels. To better understand the changes in microstructure and mechanical performance associated with the variation of trace elements and enable design of steels operating at more demanding conditions, we formulated three versions of P92 within the specified allowable N, B, C and Si ranges. Different service conditions were explored, and >80% decrease in creep life was observed at 625°C 155MPa for the highest B and N containing alloy. Multiscale characterization (OM, SEM, TEM) revealed key changes due to the trace element variation. The high trace content alloy formed deleterious BN precipitates with morphology that would promote crack nucleation, but also formed higher fractions of beneficial MX precipitates. The alloy with the lowest trace content showed the best creep performance – a result of the refined precipitate populations and the absence of large-scale inclusions and BN precipitates.

Antonov, Stoichko↗

Probing the Sustainable Reduction of CO 2 , N 2 and NO 3 to Fuels and Chemicals using Non-Traditional Porphyrinoid Catalysts

For the last several decades, numerous strategies have been proposed to be able to interconvert electricity and commodity fuels for transportation and other applications. Even as solar and wind energy become more widely available, these renewable energy sources are not always available where the population is most dense or during peak times of energy demand. One plausible solution to the issue of electricity storage and transport is to use electricity to drive the formation of high-energy compounds and chemical fuels. As a result, the electrochemical conversion of CO 2 into chemical fuels has received major attention as a multi-pronged approach for electricity coversion, storage, and transport. Similar strategies are also attractive for conversion of N 2 and NO x into value added compounds such as ammonia. Metalloporphyrin and metallocorrole complexes are comprised of aromatic tetrapyrrole scaffolds and have been extensively studied as homogeneous catalysts for critical catalytic processes like the electrochemical CO 2 reduction reaction (eCO 2 RR) to generate CO as feedstock for the Fischer–Tropsch process to generate a variety of hydrocarbons as chemical fuels. Despite their significance and impact, efficiently driving such catalytic reduction processes is challenging for multiple reasons. Such processes require multiple-electron transfer events, as opposed to single-electron redox chemistry that forms high-energy singly-reduced intermediates. In addition, these electron transfer events must be coupled to proton-transfer steps and avoid application of high overpotentials where proton (H + ) reduction to generate H 2 (as well as other side-reactions) can lower the selectivity and energy efficiency of the eCO 2 RR process. Certain Fe(III) aromatic tetrapyrroles (e.g., porphyrins and corroles) have been reported to overcome these challenges, but are often difficult to synthesize and modify, and have a tendency to support single-electron redox chemistry at the metal as opposed to multielectron redox involving the ligand and metal in concert. Other families of tetrapyrroles in which all four meso-carbons are reduced (i.e., sp 3 -hybridized) are also known in the literature. These non-aromatic tetrapyrroles are known as porphyrinogens and support multi-electron redox chemistry which has been elaborated by several groups, prompting researchers to consider whether these scaffolds may improve the kinetics and efficiencies of multi-electron steps attendant to activation of thermodynamically stable small-molecule substrates such as CO 2 , N 2 , NO 3 − , and NO 2 − . Although porphyrinogens support multi-electron redox properties, the four sp 3 -hybridized meso-carbons inherent to the tetrapyrrole core completely disrupt π-conjugation between pyrrolic units, which compromises the photochemical properties of porphyrinogens in comparison to that of traditional porphyrinoids. Moreover, the highly reducing nature of porphyrinogens predisposes these platforms to extreme air and water sensitivity. Accordingly, such metalated porphyrinogens are often pyrophoric and/or incompatible with many common organic solvents (CH 2 Cl 2 , CHCl 3 , CH 3 CN, EtOAc, etc.). Hence, reports of efficient small-molecule activation or catalysis supported by porphyrinogens have been limited. To overcome the instability of porphyrinogens while retaining the scaffold’s attractive multi-electron redox properties, we have directed attention to establishing less-well studied groups of non-aromatic tetrapyrroles (i.e., phlorins, biladienes, and isocorroles). These non-traditional tetrapyrroles each contain just a single sp 3 -hybridized meso-carbon, which ablates the platforms aromaticity but still provides an extended π-framework. In addition to developing innovative platforms that may be used to sustainably generate value-added chemicals, fuels, and ammonia via either photo- or electrocatalytic approaches our work also has significantly broadened our understanding of how to prepare and modulate the properties of non-aromatic tetrapyrroles for other applications. Our efforts entailed a synergistic partnership and active collaborations with Drs. David C. Grills and Mehmed Z. Ertem (both of Brookhaven National Lab) to better characterize isocorroles (and related non-aromatic tetrapyrroles) using a variety of advanced spectroscopic and theoretical methods. Our combined efforts have shown that the combination of properties that isocorroles (and related tetrapyrroles) provide results in good chemical stability paired with unique redox and photochemical characteristics that are not typically supported by simple and/or unadorned aromatic tetrapyrroles. Beside redox chemistry, the photochemistry of isocorroles and other non-aromatic tetrapyrroles containing one sp 3 -hybridized meso-carbon is also appealing due to their absorption in the long-visible to near-IR regions, which are essential for photocatalysis and related applications that benefit from direct excitation at these wavelengths. The results reported vastly improve our understanding of non-aromatic tetrapyrrole synthesis, properties and utility for activation of small molecule substrates such as O 2 and CO 2 in the presence of weak cationic organic acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The 22 Ne(α,n) 25 Mg reaction - state of the art, astrophysics, and perspectives

One of the most important stellar neutron sources is the 22 Ne(α,n) 25 Mg reaction, which gets activated both during the helium intershell burning in asymptotic giant branch stars and in core helium and shell carbon burning in massive stars. The 22 Ne(α,n) 25 Mg reaction serves as the main neutron producer for the weak s-process and provides a short but strong neutron exposure during the helium flash phase of the main s-process, significantly affecting the abundances at the s-process branch points. The cross section needs to be known at very low energies, as close as possible to the neutron threshold at E α = 562 keV (Q = −478 keV), but both direct and indirect measurements have turned out to be very challenging, leading to significant uncertainties. Here we discuss the current status of the reaction, including recent and upcoming measurements, and provide a discussion on the astrophysical implications as well as an outlook into the near future.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Degradation and Accelerated Recovery of Surface Passivation in n+ Poly-Si/SiOx Passivating Contacts for TOPCon Solar Cells

We studied the surface degradation and recovery of fired poly-Si/SiOx passivating contacts during subsequent dark and illuminated annealing. We report on an industrially-viable path for accelerated recovery of surface passivation. The degradation is influenced by the type of doping in the poly-Si. Phosphorus doped n+ poly-Si/SiOx contacts show degradation followed by recovery, undoped poly-Si/SiOx contacts only show recovery during annealing. Boron doped p+ poly-Si/SiOx contacts show neither degradation nor improvement with annealing. Both degradation and recovery are thermally-activated processes and are completely reversible and cyclic in nature. The activation energy of degradation and recovery in dark for n+ poly-Si/SiOx contacts are 1.27 and 1.33 eV respectively. Dark annealing at elevated temperatures is effective for complete recovery but takes a long time (~30 min at 350 degrees C) due to higher activation energies. Annealing under 7.5 Suns of illumination lowers the activation energy for degradation and recovery to 0.88 and 0.90 eV, respectively. Using this data, we have developed an industrially viable post-firing treatment for accelerated recovery of TOPCon cells by annealing them at elevated temperatures and under intense illumination for a few minutes.

14 SOLAR ENERGY↗

Scalable, ab initio protocol for quantum simulating SU($N$)×U(1) Lattice Gauge Theories

We propose a protocol for the scalable quantum simulation of SU(N)×U(1) lattice gauge theories with alkaline-earth like atoms in optical lattices in both one- and two-dimensional systems. The protocol exploits the combination of naturally occurring SU(N) pseudo-spin symmetry and strong inter-orbital interactions that is unique to such atomic species. A detailed ab initio study of the microscopic dynamics shows how gauge invariance emerges in an accessible parameter regime, and allows us to identify the main challenges in the simulation of such theories. We provide quantitative results about the requirements in terms of experimental stability in relation to observing gauge invariant dynamics, a key element for a deeper analysis on the functioning of such class of theories in both quantum simulators and computers.

Physics↗

Changes in the C-terminal, N-terminal, and histidine regions of amelogenin reveal the role of oligomer quaternary structure on adsorption and hydroxyapatite mineralization

Adsorption interactions between amelogenin and calcium phosphate minerals are believed to be important to amelogenin’s function in enamel formation, however, the role of specific amino acid residues and domains within the protein in controlling adsorption is not well known. We synthesized “mechanistic probes” by systematically removing charged regions of amelogenin in order to elucidate their roles. The probes included amelogenin without the charged residues in the N-terminus (SEKR), without two, three, or eight histidines (H) in the central protein region (H2, H3, H8), or without the C-terminal residues (Delta). In-situ atomic force microscopy (AFM) adsorption studies onto hydroxyapatite (HAP) single crystals confirmed that the C-terminus was the dominant domain in promoting adsorption. We propose that subtle changes in protein-protein interactions for proteins with histidines and N-terminal residues removed resulted in changes in the oligomer quaternary size and structure that also affected protein adsorption. HAP mineralization studies revealed that the oligomer-HAP binding energy and protein layer thickness were factors in controlling the amorphous calcium phosphate (ACP) to HAP induction time. Our studies with mechanistic probes reveal the importance of the oligomer quaternary structure in controlling amelogenin adsorption and HAP mineralization.

59 BASIC BIOLOGICAL SCIENCES↗

Ru Single Atoms on One-Dimensional CF@g-C 3 N 4 Hierarchy as Highly Stable Catalysts for Aqueous Levulinic Acid Hydrogenation

Herein, we report a stable catalyst with Ru single atoms anchored on a one-dimensional carbon fiber@graphitic carbon nitride hierarchy, by assembling wet wipes composed of fiber-derived carbon fiber (CF), melamine-derived graphitic carbon nitride (g-C3N4) and RuCl3 before NaBH4 reduction. The atomically dispersed Ru species (3.0 wt%) are tightly attached via N-coordination provided by exterior g-C3N4 nanosheets, and further stabilized by the interior mesoporous CF. The obtained CF@g-C3N4–Ru SAs catalyst can be cycled six times without notable leaching of Ru or loss of GVL yield in the acidic media. This catalyst is more stable than Ru nanoparticles supported on CF@g-C3N4, as well as Ru single atoms anchored on CF and g-C3N4, and proves to be one of the most efficient metal catalysts for aqueous LA hydrogenation to γ-valerolactone (GVL). The isolated Ru atoms by strong N-coordination, and their enhanced electron/mass transfer afforded by the one-dimensional hierarchy, can be responsible for the excellent durability of CF@g-C3N4–Ru SAs under harsh reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗