Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Melting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Leveraging Inequality-Constrained Data for Enhanced Liquidus Temperature Prediction in Nuclear Waste Glass Melts

Inequality-constrained data are frequently discarded in engineering, leading to significant information loss in data-scarce domains like glass characterization in nuclear waste vitrification. This paper presents a nonparametric censored-data regression framework based on an l1-norm optimization criterion that leverages slack variables to integrate left-, right-, and interval-constrained observations into training without distributional assumptions. Validated on synthetic data and a Physics-Informed Neural Network (PINN) for predicting liquidus temperature (TL), the method improved R2 from 0.60 to 0.89 and reduced Mean Absolute Error (MAE) by 48% (51.46 to 26.89?rC) on deterministic values. The traditional models failed to satisfy any inequality constraints while the proposed l1-norm PINN satisfies 81.25% of the constraints. The proposed framework effectively extracts actionable information from previously unusable data to enhance predictive accuracy, reduce epistemic uncertainty, and ensure physical consistency in complex industrial applications.

Garcia-Morado, Erick↗

Ultra–fast, selective, non–melting, laser sintering of alumina with anisotropic and size–suppressed grains

In this paper, we report an ultra-fast sintering phenomenon of alumina achieved by the scanning laser irradiation method. Using CO 2 laser irradiation, we found that micrometer-sized alumina powder (d 50 = 1.2 µm) can be sintered close to full density within a few tens of seconds. The microstructure of laser-sintered alumina was different from that of the furnace-sintered alumina. The relative density and grain size of the laser-sintered alumina gradually decreased from the center of the laser beam to the edge. Anisotropy of the grain size was measured along and perpendicular to the scanning direction. This anisotropy decreased as the scanning speed decreased from 0.1 mm/s to 0.01 mm/s. The sintering master curve of grain size versus relative density, which reflects the sintering mechanism, was found to be affected by the laser scanning speed. When the laser scanning speed was 0.1 mm/s, grain size suppression was found for the almost fully dense alumina. However, at lower scanning speed (e.g., 0.01 mm/s), there was significant grain growth in the regions where the relative density was greater than 90%. Furthermore, these results clearly indicate that alumina can be sintered, in the solid-state, to a high density in a short time using scanning laser and the microstructure is different from the furnace-sintered alumina.

08 HYDROGEN↗

PhaseChange Material Melting in an Energy Storage Module for a Micro Environmental ControlSystem

An experimentally validated finite element model (FEM) was developed to analyze the design parameters of a latent heat storage device (LHSD) for a micro environmental control system ( μ X). The μ X provides local cooling to an office worker in a room whose thermostat setpoint has been elevated from 23.9 °C (75 °F) to 26.1 °C (79 °F) in order to reduce heating, ventilation, and air conditioning (HVAC) energy consumption. For this application, the LHSD is designed to provide ≥50 W of cooling for a full, 8.5 h workday to restore thermal comfort in the warm, 26.1 °C room. The LHSD comprises several parallel slabs of encased phase change material (PCM) with interposed airflow channels. The airflow rate is selected to obtain ≥50 W of cooling at the end of the 8.5 h operation. The LHSD exhibits a decreasing cooling rate over the 8.5 h period when a constant airflow is passed through it, indicating that more cooling is supplied during the day than the minimum 50 W required for thermal comfort. The parametric analysis explores the effects of PCM thermal conductivity, slab thickness, air channel width, and number of slabs on LHSD performance. Parametric cases are compared against each other on the basis of their required PCM mass and energy consumption.

Engineering↗

Melt-grown semi-insulating Mn:β-Ga 2 O 3 single crystals exhibiting unique visible absorptions and luminescence

In this study, several acceptor dopants have been explored in β-Ga 2 O 3 to produce semi-insulating substrates and epitaxial films. Fe and Mg make up the majority of research thus far; however, other transition metals provide potential alternatives for optimized performance. β-Ga 2 O 3 bulk single crystals were grown by the Czochralski and vertical gradient freeze methods with a nominal dopant concentration of 0.25 at. % Mn. Ultraviolet-visible-near infrared spectroscopy and photoluminescence revealed polarization- and orientation-dependent optical absorptions (pleochroism) coupled with an orange luminescence. All samples were electrically insulating, on the order of 10 9 –10 11 ohm cm at room temperature, indicative of acceptor doping. Actual dopant concentrations of the intentionally doped transition metal and background impurities were determined via glow discharge mass spectrometry, indicating the macroscale segregation behavior. High-temperature resistivity measurements indicated an experimental acceptor level of 1.7 ± 0.2 eV. Hydrogenation of samples resulted in an increase in the orange luminescence and O–H stretching modes observable in the infrared spectrum. Density functional theory calculations were performed to determine the likely site-occupancy and acceptor level of Mn in the bandgap.

36 MATERIALS SCIENCE↗

Effect of doping and heat treatment on the mechanical parameters of ZnSe{sub (1-x)}Te{sub x} crystals grown from the melt

The mechanical properties of crystals of ZnSe{sub (1-x)}Te{sub x} (0 < x < 1.3 wt %) solid solutions are investigated using the indentation method. The breaking points of doped and undoped crystals are measured by the uniaxial compression method. It is revealed that the microhardness anisotropy coefficient for crystals with a tellurium dopant content of {approx}0.3 wt % is equal to unity. A change in the tellurium content in the solid solutions from 0.2 to 1.3 wt % leads to a linear increase in the microhardness by 23%. The brittle strength of the ZnSe and ZnSe{sub (1-x)}Te{sub x} crystals varies in a similar manner. It is demonstrated that heat treatment and the presence of interblock boundaries affect the ultimate strength and the cracking resistance of the ZnSe{sub (1-x)}Te{sub x} crystals. This is an important factor which should be taken into account in mechanical treatment of the materials under investigation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The chemical action of oxygen on a heater during growth of refractory oxide crystals from melt

The behavior of the W-O{sub 2} system has been investigated at 2400 K in the pressure range from 1 to 1 x 10{sup -5} bar. The chemical composition of the solid and vapor phases for the ratio W: O{sub 2} = 1: 1 was calculated by minimizing the Gibbs free energy. It is shown that the only solid phase in the system is metallic tungsten (0.333-0.355 mol), whereas trioxide WO{sub 3} dominates in the vapor phase; its concentration may reach 99%. It is concluded that providing an inert atmosphere in the growth chamber with a pressure of 1 bar decreases the concentration of atomic and molecular oxygen in the vapor phase and decreases its effect on the tungsten heater.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The growth of ZnWO{sub 4} and CdWO{sub 4} single crystals from melt by the low thermal gradient Czochralski technique

The features of growth of single crystals of cadmium and zinc tungstates by the low thermal gradient Czochralski technique have been investigated. The effect of change in the growth conditions on the crystal morphology and the capture of macroinclusions is studied. Crystals 45 mm in diameter and up to 150 mm long (cylindrical part) are obtained. Their optical and scintillation characteristics are measured.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molybdenum and Tungsten Combined Oxidation by Dissociative Evaporation of Products during Refractory Oxides Crystal Growth from the Melt

The main chemical reactions and composition of gas and solid phases have been determined for the equimolar ratio Mo: W: O{sub 2} = 1: 1: 2 at T = 2400 K in the pressure range of 1-1 x 10{sup -5} bar. It is established that the character of the main processes of combined oxidation depends significantly on the pressure and state of the oxidant (oxygen): at P > 7.52 x 10{sup -5} bar, oxidation reactions involve mainly molecular oxygen, whereas atomic oxygen dominates at lower pressures. At P {>=} 0.424 bar, the solid phase contains not only Mo but also MoO{sub 2}. At P = 1 x 10{sup -5} bar, the concentration of lower Mo and W oxides and elementary Mo and W in the gas phase sharply increases, which can negatively affect the main crystallization units.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxidation–reduction processes upon interaction of aluminum oxide melt with molybdenum and tungsten in a hydrogen-containing atmosphere

A thermodynamic analysis of the processes occurring in the Мо–W–Al{sub 2}O{sub 3} system at T = 2400 K and a total pressure of 1 bar, set by controlled reducing Ar + H{sub 2} atmosphere, has been performed. It is found that the basic components of the system do not interact directly, although may be actively involved in chemical reactions with participation of other components to undergo numerous cyclic oxidation–reduction processes. Particular attention is paid to the processes involving such chemically active reagents as Н{sub 2}O{sub 2}, HO{sub 2}, H{sub 2} (H), gaseous Al, and its hydrides (AlH, AlH{sub 2}, AlH{sub 3}).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗