Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Mechanism and kinetic study of rare earth extraction from allanite by direct acid leaching

Direct acid leaching was conducted to recover rare earth elements (REEs) from an allanite ore assaying 9,861.4 ppm of REEs. The effects of operational variables such as acid type, sulfuric acid (H 2 SO 4 ) concentration, temperature, solid/liquid (S/L) ratio, and particle size on the total REE (TREE) recovery were systematically examined. The REE mineralogy and the involved leaching mechanisms were investigated by microscopic characterization and residue re-leaching tests. It was found that approximately 80% of REEs was extracted using 1 M H 2 SO 4 at 75 °C for 2 h. Increasing temperature significantly improved the REE extraction, while changing acid type, H 2 SO 4 concentration, and particle size did not. The TREE recovery also gradually decreased at higher S/L ratios. The low fraction of Si leached (<4.0%) suggested that the extraction did not significantly alter the crystal structure of the dominant mineral. The leaching kinetics of REEs were fast within the first 10 min, followed by a much slower stage (i.e., 10-120 min). The kinetic modeling results showed that each stage may be controlled by both chemical reaction and diffusion (i.e., mix control). The activation energies for REE leaching using 1 M H 2 SO 4 in the 0-10 min and 10-120 min were determined to be 20.3 and 10.8 kJ/mol, respectively. Finally, the residue re-leaching results suggested that the fast leaching kinetics at the beginning may be explained by the preferential decomposition of metamict allanite rather than the formation of silica gel, while the following slower leaching stage was due to the dissolution of difficult-to-leach REE-bearing minerals such as well-crystallized allanite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sulfide precipitation characteristics of Mn, Ni, Co, and Zn in the presence of contaminant metal ions

In this study, the effects of Al 3+ and Fe 2+ on the precipitation characteristics of four valuable metals, including Mn 2+ , Ni 2+ , Co 2+ , and Zn 2+ , were investigated by conducting solution chemistry calculations, sulfide precipitation tests, and mineralogy characterizations. It was found that the ability of the valuable metals to form sulfide precipitates followed an order of Zn 2+ > Ni 2+ > Co 2+ > Mn 2+ . The sulfide precipitate of Zn 2+ was the most stable and did not re-dissolve under the acidic condition (pH 4.00 ± 0.05). In addition, the sulfide precipitation characteristics of Zn 2+ was barely affected by the contaminant metal ions. However, in the presence of Al 3+ , the precipitation recoveries of Mn 2+ , Ni 2+ , and Co 2+ were noticeably reduced due to simultaneous hydrolysis and competitive adsorption. The precipitation recoveries of Ni 2+ and Co 2+ in solutions containing individual valuable metals also reduced when Fe 2+ was present, primarily due to competitive precipitation. However, the recovery of Mn 2+ was enhanced due to the formation of ferrous sulfide precipitate, providing abundant active adsorption sites for Mn species. Here, in the solution containing all the valuable metals, Fe 2+ promoted the recovery of the valuable metals due to the higher concentration of Na 2 S and the formation of ferrous sulfide precipitate.

58 GEOSCIENCES↗

In situ determination of crystal structure and chemistry of minerals at Earth's deep lower mantle conditions

Recent advances in experimental techniques and data processing allow in situ determination of mineral crystal structure and chemistry up to Mbar pressures in a laser-heated diamond anvil cell (DAC), providing the fundamental information of the mineralogical constitution of our Earth's interior. This work highlights several recent breakthroughs in the field of high-pressure mineral crystallography, including the stability of bridgmanite, the single-crystal structure studies of post-perovskite and H-phase as well as the identification of hydrous minerals and iron oxides in the deep lower mantle. The future development of high-pressure crystallography is also discussed.

58 GEOSCIENCES↗

Lorandite from Allchar as geochemical detector for pp-solar neutrinos

LOREX (LORandite EXperiment) is a geochemical project addressing the solar proton-proton neutrino flux for the period of 4.31(2) Ma from the reaction Tl-205 + v(e) -> (205)pb + e(-) with a very low threshold (52 keV) for solar pp-neutrino capture. A decisive step for this purpose is to obtain the precise, background-corrected ratio of Pb-205/Tl-205 in the mineral lorandite (TlAsS2) as geochemical detector occurring in the ore deposit of Allchar in Macedonia. This study presents a report on the excavation of lorandite bearing ore from adit P-21 of the ore body Crven Dol as well as on the separation of pure lorandite from the raw ore. A detailed mineralogical and chemical investigation of the separated lorandite is performed with special regard to the question of its use as detector for solar pp-neutrinos.

Allchar ore deposit↗

Inverse hydrochemical models of aqueous extracts tests

Aqueous extract test is a laboratory technique commonly used to measure the amount of soluble salts of a soil sample after adding a known mass of distilled water. Measured aqueous extract data have to be re-interpreted in order to infer porewater chemical composition of the sample because porewater chemistry changes significantly due to dilution and chemical reactions which take place during extraction. Here we present an inverse hydrochemical model to estimate porewater chemical composition from measured water content, aqueous extract, and mineralogical data. The model accounts for acid-base, redox, aqueous complexation, mineral dissolution/precipitation, gas dissolution/ex-solution, cation exchange and surface complexation reactions, of which are assumed to take place at local equilibrium. It has been solved with INVERSE-CORE{sup 2D} and been tested with bentonite samples taken from FEBEX (Full-scale Engineered Barrier EXperiment) in situ test. The inverse model reproduces most of the measured aqueous data except bicarbonate and provides an effective, flexible and comprehensive method to estimate porewater chemical composition of clays. Main uncertainties are related to kinetic calcite dissolution and variations in CO2(g) pressure.

54 ENVIRONMENTAL SCIENCES↗

A review of rare earth elements and yttrium in coal ash: Content, modes of occurrences, combustion behavior, and extraction methods

Rare earth elements and yttrium (REY) have attracted considerable attention over the last decade because of their vital roles in clean energy, consumer product, national defense and security applications, among other uses. Due to the retention of REY during coal burning, coal combustion ash is considered as potential alternative sources for REY. Understanding the content, speciation, retention and/or transformation behavior of REY during coal combustion not only expands our knowledge of the combustion behavior of the trace elements in coal, but also provides basis for modeling REY partitioning during coal combustion and for developing economically viable REY recovery technologies. This review makes a critical summary of recent progress in the study of REY in coal ash. The contents and the extraction potentials of REY in coal ash derived from 15 major coal-producing countries worldwide were summarized and evaluated. Various analytical methods for determining REY bulk contents and speciation, together with the solid sample pretreatment, analytical accuracy and precision, advantages and disadvantages were summarized and compared. Modern analytical approaches combined indirect methods (e.g., sequential extraction) shed light on the physical distribution, mineralogy, and the chemical state of REY in coal ash. Three types of REY occurrences in coal ash, including Si-Al glassy association, discrete minerals or compounds, and organic association (bound with unburned carbon) were defined in the review. The glassy association can be further divided into REY minerals closely bound to glass phases and dispersed throughout the glassy structure. REY partitioning in various emission streams, the size distribution, and their enrichment behavior in coal ash were discussed. Additionally, thermal behavior and transformation of various REY forms in coal during combustion process, including organic-associated REY, REY phosphates, REY carbonates, clay-bound REY and among others were summarized. Two possible retention mechanisms of REY by aluminosilicate glass at boiler temperature were proposed: the incorporation of the individual REY phases into the glass as inclusions and the diffusion of REY phases throughout Si-Al glass structures in the melting process. Feed coal mineral types, mineral-mineral associations, boiler conditions, and other factors control the retention process. After coal combustion, the speciation of REY in fly ash may be modified by the reactions of REY phases with flue gas components. Further, an overview of REY transformation mechanisms during coal combustion was deeply discussed. Finally, current extraction techniques for REY recovery from coal combustion ash were introduced. Future outlooks and research problems were also identified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of H2O on Upper Phase Transitions in MgSiO3: Is the Depth of the Seismic X-Discontinuity an Indicator of Mangle Water Content?

The mantle X-discontinuity, usually assigned to positive seismic velocity reflectors in the 260-330 km depth range, has proved difficult to explain in terms of a single mineralogical phase transformation in part because of its depth variability. The coesite to stishovite transition of SiO{sub 2} matches deeper X-discontinuity depths but requires 5-10% free silica in the mantle to match observed impedance contrast. The orthoenstatite (OEn) to high-pressure clinoenstatite (HPCen) transformation of MgSiO{sub 3} also broadly coincides with depths of the X but requires chemically depleted and orthoenstatite-rich lithology at 300 km depth in order to match observed seismic impedance contrast. On the basis of high-pressure infrared spectroscopy, X-ray diffraction, and Raman spectroscopy, we show that 1300 ppm variation of H{sub 2}O content in MgSiO{sub 3} can displace the transition of low-pressure clinoenstatite (LPCen) to HPCen by up to 2 GPa, similar to previous quench experiments on the OEn to HPCen phase transition, where about 30-45 km (1.0-1.5 GPa) of deflection could occur per 0.1 wt% H{sub 2}O. If the mantle X-discontinuity results from pyroxene transitions in a depleted harzburgite layer, because of the strong influence of minor amounts of water on the transformation boundary, the depth of the mantle X-discontinuity could serve as a potentially sensitive indicator of water content in the upper mantle.

58 GEOSCIENCES↗

Characterizing mineralization on low carbon steel exposed to aerated and degassed synthetic hydraulic fracture fluids

This study investigates the mineralization occurring at the interface between injected hydraulic fracturing fluids and steel production casing during the shut-in period of unconventional shale wells. Mild steel coupons were reacted with synthetic hydraulic fracturing fluids with varying base fluid and dissolved gas concentrations. Experiments were carried out in an autoclave system set at 50 °C and 2000 PSI for 2 and 14 days. Physical and mineralogical changes to the steel coupons’ surface were characterized using an FEI Quanta 600 field emission gun (FEG) scanning electron microscope (SEM) and a PANalytical XPert Pro diffractometer. Barite precipitation occurred ubiquitously during the first 48 hours in all experimental scenarios. Sulfate radicals created from degradation and reduction of ammonium persulfate breakers facilitate barite formation. Concomitant barite and corrosion related precipitates on the sample surfaces suggest iron hydroxy salts act as nucleation sites for mineral scale growth. These results suggest hydraulic fracturing fluids may have deleterious effects on the wellbore before production of the well begins.

36 MATERIALS SCIENCE↗

Comparison of volatiles evolving from selected highland and mare lunar regolith simulants during vacuum sintering

Volatiles evolving from JSC-1A, NU-LHT-4M and CSM-LHT-1G lunar regolith simulants during in vacuo thermal processing were analyzed using mass spectrometry as a function of temperature. Two high-fidelity simulants, JSC-1A (mare) and NU-LHT-4M (highland), were compared to a newly developed CSM-LHT-1G highland simulant, modified to closely match lunar geochemistry. Large autogenous gas loads were observed for all investigated materials. Mineralogical knowledge was used to identify and attribute individual volatile species to reacting, transforming, or decomposing constituents (hydrates, carbonates, sulfates, sulfides, clays, etc.) of the respective regolith simulant in the self-generated gas environment. Cumulative mass losses for individual simulant components as a function of temperature were quantified using mass spectrometry in conjunction with thermogravimetric analysis. Investigation of the four components of CSM-LHT-1G – anorthosite, basalt, augite, and glass – aided the attribution of volatile species to specific compounds and their respective sources. The results showed significant decomposition of non-lunar phases present in the man-made regolith simulants below the typical glass crystallization temperatures, which paves the way to devising methods for enhancing the fidelity of the simulants. Finally, high gas loads and corrosive gases (HF and HCl) were recognized as potential hazards, pertaining to the development of large testbed facilities.

42 ENGINEERING↗

Analysis of rare earth elements in coal fly ash using laser ablation inductively coupled plasma mass spectrometry and scanning electron microscopy

Reference standard NIST SRM 1633b and FA 345, a fly ash sample from an eastern U.S. coal power plant, were analyzed to determine and quantify the mineralogical association of rare earth elements (REE). These analyses were completed using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and a scanning electron microscope, equipped with an energy-dispersive X-ray spectrometer (SEM-EDS). Internal standardization was avoided by quantifying elemental concentrations by normalizing to 100% oxides. Mineral grains containing elevated REE concentrations were found in diverse chemical environments, but were most commonly found in regions where Al and Si were predominant. Dividing the spot analyses into time segments yielded plots that showed the REE content changing over time as individual mineral grains were being ablated. SEM-EDS images of FA 345 confirmed the trends that were found in the LA-ICP-MS results. Small grains of apatite, monazite, or zircon were frequently observed as free mineral grains or embedded in amorphous aluminosilicate glass and were not associated with ferrous particles. This finding is consistent with previous reports that magnetic enrichment may be an effective way of concentrating non-magnetic REE phases. Moreover, aggressive mechanical and chemical-based separation schemes will be required to separate and recover REE from aluminosilicate glass.

01 COAL, LIGNITE, AND PEAT↗

A comparative study of multimodal data fusion strategies for planetary spectroscopy

Integrating heterogeneous data sources can improve scientific inference when different modalities capture complementary information, but doing so is challenging in high-dimensional, small-sample settings. In spectroscopy for planetary exploration, Laser-Induced Breakdown Spectroscopy (LIBS), Raman Spectroscopy (Raman), Visible Infrared Spectroscopy (VISIR), and Mid-Infrared Spectroscopy (MIR) each examine different aspects of composition and mineralogy, raising fundamental questions about when and how data fusion improves predictive performance. Using a Mars-relevant set of geologic standards with measurements from all four modalities, we present a rigorous systematic evaluation of four data fusion strategies: low-level (data) fusion, mid-level (feature) fusion, high-level (decision) fusion, and residual-boosting (sequential) fusion. We assess performance in predicting oxide composition via nested cross-validation and corrected significance testing to evaluate whether data fusion improves upon single-modality baselines. We show that data fusion does not uniformly improve accuracy, and that observed gains are modest, oxide-dependent, and sensitive to modality and model structure. To move beyond aggregate accuracy metrics, we use model coefficients, permutation importance, and residual gain analysis to examine how the fusion models weight individual modalities and to identify patterns of apparent complementarity or redundancy. Though focused on spectroscopy for planetary exploration, our framework for data fusion evaluation and interpretation extends to other scientific domains with heterogeneous and scarce data and provides a principled approach evaluating data fusion strategies, interpreting modality contributions, and understanding tradeoffs among data fusion strategies.

97 MATHEMATICS AND COMPUTING↗

Speciation and distribution of vanadium in drinking water iron pipe corrosion by-products

Vanadium (V) when ingested from drinking water in high concentrations (> 15 {micro}g L{sup -1}) is a potential health risk and is on track to becoming a regulated contaminant. High concentrations of V have been documented in lead corrosion by-products as Pb{sub 5}(V{sup 5+}O{sub 4}){sub 3}Cl (vanadinite) which, in natural deposits is associated with iron oxides/oxyhydroxides, phases common in iron pipe corrosion by-products. The extent of potential reservoirs of V in iron corrosion by-products, its speciation, and mechanism of inclusion however are unknown. The aim of this study is to assess these parameters in iron corrosion by-products, implementing synchrotron-based {mu}-XRF mapping and {mu}-XANES along with traditional physiochemical characterization. The morphologies, mineralogies, and chemistry of the samples studied are superficially similar to typical iron corrosion by-products. However, we found V present as discrete grains of Pb{sub 5}(V{sup 5+}O{sub 4}){sub 3}Cl likely embedded in the surface regions of the iron corrosion by-products. Concentrations of V observed in bulk XRF analysis ranged from 35 to 899 mg kg{sup -1}. We calculate that even in pipes with iron corrosion by-products with low V concentration, 100 mg kg{sup -1}, as little as 0.0027% of a 0.1-cm thick X 100-cm long section of that corrosion by-product needs to be disturbed to increase V concentrations in the drinking water at the tap to levels well above the 15 {micro}g L{sup -1} notification level set by the State of California and could adversely impact human health. In addition, it is likely that large reservoirs of V are associated with iron corrosion by-products in unlined cast iron mains and service branches in numerous drinking water distribution systems.

36 MATERIALS SCIENCE↗

Understanding controls on redox processes in floodplain sediments of the Upper Colorado River Basin

Floodplains, heavily used for water supplies, housing, agriculture, mining, and industry, are important repositories of organic carbon, nutrients, and metal contaminants. The accumulation and release of these species is often mediated by redox processes. By understanding the physicochemical, hydrological, and biogeochemical controls on the distribution and variability of sediment redox conditions we can develop conceptual and numerical models of contaminant transport within floodplains. The Upper Colorado River Basin (UCRB) is impacted by former uranium and vanadium ore processing, resulting in contamination by V, Cr, Mn, As, Se, Mo and U. Previous authors have suggested that sediment redox activity occurring within organic carbon-enriched bodies located below the groundwater level may be regionally important to the maintenance and release of contaminant inventories, particularly uranium. To help assess this hypothesis, vertical distributions of Fe and S redox states and sulfide mineralogy were assessed in sediment cores from three floodplain sites spanning a 250 km transect of the central UCRB. Our results support the hypothesis that organic-enriched reduced sediments are important zones of biogeochemical activity within UCRB floodplains. Furthermore, we found that the presence of organic carbon, together with pore saturation, are the key requirements for maintaining reducing conditions, which were dominated by sulfate-reduction products. Sediment texture was found to be of secondary importance and to moderate the response of the system to external forcing, such as oxidant diffusion. Consequently, fine-grain sediments are relatively resistant to oxidation in comparison to coarser-grained sediments. Exposure to oxidants consumes precipitated sulfides, with a disproportionate loss of mackinawite (FeS) as compared to the more stable pyrite. The accompanying loss of redox buffering capacity creates the potential for release of sequestered radionuclides and metals. Because of their redox reactivity and stores of metals, C, and N, organic-enriched sediments are likely to be important to nutrient and contaminant mobility within UCRB floodplain aquifers.

54 ENVIRONMENTAL SCIENCES↗

A review of the behavior of radioiodine in the subsurface at two DOE sites

The 129 I isotope has a half-life of nearly 16 million years, creating a potential risk to receptors when 129I is present in groundwater and effective remedies are needed to mitigate its potential risk in the environment. This paper not only provides an in-depth review of various processes and reactions that control the fate and transport of iodine, but also describes how this information can be used for in situ management of iodine. The majority of the iodine fate and transport studies have been conducted at the US Department of Energy (DOE) Hanford and Savannah River sites, where radioisotopes of iodine were inadvertently released into the environment during weapons production. Site-specific remediation technologies are currently being evaluated as part of the DOE cleanup mission. The sites are markedly different in terms of climate (arid vs. sub-tropical), major geochemical parameters (pH ~ 7.5 vs. 4) and mineralogy (carbonate vs. Fe/Al oxide dominated), but they share the same network of processes and reactions that control iodine fate and transport. These include adsorption to minerals and sediments, interactions with organic matter, electron transfer reactions with minerals and microbes, and precipitation. In conclusion, this process-based network serves as basis for regional scale model calculations to predict plume spreading and/or dissipation, design efficient remediation techniques and conduct contamination management activities.

54 ENVIRONMENTAL SCIENCES↗

Zinc speciation and desorption kinetics in a mining waste impacted tropical soil amended with phosphate

Mining is an important component of the Brazilian economy. However, it may also contribute to environmental problems such as the pollution of soils with zinc and other potentially toxic metals. Our objective was to evaluate changes in the chemical speciation and mobility of Zn in a soil amended with phosphate. Soil samples were collected from a deactivated mining area in the state of Minas Gerais, Brazil, and amended with NH 4 H 2 PO 4 saturated with deionized water to 70 % of maximum water retention and incubated at 25 ± 2 °C in open containers for 60 days. The soil was chemically and mineralogically characterized, and sequential extraction, desorption kinetics, and speciation were carried out using synchrotron bulk-sample and micro–X-ray Absorption Near-Edge Structure (XANES/μ-XANES) spectroscopy at the Zn K-edge, and X-ray fluorescence microprobe analysis (μ-XRF). The combination of μ-XRF and μ-XANES techniques made it possible to identify Zn hotspots in the main species formed after phosphate remediation. The best fit combination for bulk XANES and μ-XANES was observed in Zn-montmorillonite, Zn-kerolite, Zn-ferrihydrite, and gahnite. In the course of phosphate treatment, gahnite, Zn layered double hydroxides (Zn-LDH), Zn3(PO4), and ZnO were identified by bulk XANES, while Zn-ferrihydrite, Zn-montmorillonite, and scholzite were identified by μ-XANES. Zinc in the phosphate-amended soil had the strongest partial correlations (r' > 0.05) with Ni, Co, Fe, Cr, Mn, Si, P, Cd, Pb, and Cd, while the unamended soil showed the strongest correlation with Cu, Pb, Fe, and Si. The application of NH 4 H 2 PO 4 altered Zn speciation and favored an increase in Zn desorption. Here, the most available Zn contents after phosphate amendment were correlated with the release of exchangeable Zn fractions, associated with carbonate and organic matter.

54 ENVIRONMENTAL SCIENCES↗

Microscale spatial distribution and soil organic matter persistence in top and subsoil

The spatial distribution of organic substrates and microscale soil heterogeneity significantly influence organic matter (OM) persistence as constraints on OM accessibility to microorganisms. However, it is unclear how changes in OM spatial heterogeneity driven by factors such as soil depth affect the relative importance of substrate spatial distribution on OM persistence. This work evaluated the decomposition and persistence of 13 C and 15 N labeled water-extractable OM inputs over 50 days as either hotspot (i.e., pelleted in 1–2 mm-size pieces) or distributed (i.e., added as OM < 0.07 μm suspended in water) forms in topsoil (0–0.2 m) and subsoil (0.8–0.9 m) samples of an Andisol. We observed greater persistence of added C in the subsoil with distributed OM inputs relative to hotspot OM, indicated by a 17% reduction in cumulative mineralization of the added C and a 10% higher conversion to mineral-associated OM. A lower substrate availability potentially reduced mineralization due to OM dispersion throughout the soil. NanoSIMS (nanoscale secondary ion mass spectrometry) analysis identified organo-mineral associations on cross-sectioned aggregate interiors in the subsoil. On the other hand, in the topsoil, we did not observe significant differences in the persistence of OM, suggesting that the large amounts of particulate OM already present in the soil outweighed the influence of added OM spatial distribution. Here, we demonstrated under laboratory conditions that the spatial distribution of fresh OM input alone significantly affected the decomposition and persistence of OM inputs in the subsoil. On the other hand, spatial distribution seems to play a lower role in topsoils rich in particulate OM. The divergence in the influence of OM spatial distribution between the top and subsoil is likely driven by differences in soil mineralogy and OM composition.

59 BASIC BIOLOGICAL SCIENCES↗

Aligning theoretical and empirical representations of soil carbon-to-nitrogen stoichiometry with process-based terrestrial biogeochemistry models

Soil carbon-nitrogen (C:N) stoichiometry acts as a control over decomposition and soil organic matter formation and loss, making it a key soil property for understanding ecosystem dynamics and projected ecosystems responses to global environmental change. However, the controls of soil C:N and how they respond to increasing pressures from global change agents are not fully understood. The “foundational” controls on soil C:N, namely plant and microbial C:N, have been used to predict soil C:N, but fail to accurately simulate all ecosystems and may be insufficient for predictions under global environmental change. Here we present an “emerging” representation of controls of soil C:N that includes plant-microbe-mineral feedbacks that have been shown to regulate soil C:N. We argue that including representation of these emerging drivers in process-based terrestrial biogeochemistry models, which include biological N fixation, mycorrhizae, priming, root exudation of organic acids, and mineralogy (including soil texture, mineral composition, and aggregation), will improve mechanistic representation of soil C:N and associated processes. Such improvements will produce models that will better simulate a variety of ecological states and predict soil C:N when global changes modify plant-microbe-mineral interactions. Here, we align our empirical understanding of controls of soil C:N with those controls represented in models, identifying contexts where emerging drivers might be particularly important to represent (e.g., priming and root exudation in nutrient-limited conditions) and areas of future work. Additionally, we show that implementing emerging drivers of soil C:N results in different simulated outcomes at steady state and in response to elevated atmospheric CO2. Our review and preliminary simulations support the need to incorporate emerging drivers of soil C:N into process-based terrestrial biogeochemistry models, allowing for both theoretical exploration of mechanisms and potentially more accurate predictions of land biogeochemical responses to global change.

54 ENVIRONMENTAL SCIENCES↗