Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level Set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

EPRI Research Results: International Nuclear Power Plant Waste Classification - 17444

Different countries around the globe use varying schemes for the classification of radioactive waste. Many countries develop country specific waste classification schemes based on the International Atomic Energy Agency (IAEA) waste classification framework. The United States of America use the Class A, B, and C waste classification. Additionally, some countries use concentration limits to classify wastes while others use dose rate limits or a combination of concentration and dose rate limits. General comparisons have been made between the IAEA and the United States classification schemes, but a clear and well researched comparison of the international schemes was not evident in the available research data sets. In 2013 Electric Power Research Institute (EPRI) initiated the Comparison of Global Low and Intermediate Level Waste Management Methods project. The objective of the project was to understand how six countries managed their low and intermediate level wastes from generation to disposal. A major task of this project was to conduct a comparison of the international waste classification schemes. EPRI developed a set of reference waste volumes that are representative of nuclear power plant low-level radioactive waste in form and radioactivity concentrations (e.g. dry active waste, high activity resin, low activity resin, high activity filters and low activity filters). These waste volumes were then classified using the waste classification systems in place in several countries around the world. In 2016, EPRI presented a paper providing a status update on this research. This 2017 paper provides the final results of that research, show where comparisons and correlations can be made, and provide a discussion on how this information might inform international radioactive research and development and benchmarking of radioactive waste management strategies, operational experiences, best practices, and technology implementation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Simple Fully Automated Group Classification on Brain fMRI

We propose a simple, well grounded classification technique which is suited for group classification on brain fMRI data sets that have high dimensionality, small number of subjects, high noise level, high subject variability, imperfect registration and capture subtle cognitive effects. We propose threshold-split region as a new feature selection method and majority voteas the classification technique. Our method does not require a predefined set of regions of interest. We use average acros ssessions, only one feature perexperimental condition, feature independence assumption, and simple classifiers. The seeming counter-intuitive approach of using a simple design is supported by signal processing and statistical theory. Experimental results in two block design data sets that capture brain function under distinct monetary rewards for cocaine addicted and control subjects, show that our method exhibits increased generalization accuracy compared to commonly used feature selection and classification techniques.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Effect on compression of lowering the design adiabat in the SQ-n campaign

A set of experiments in the SQ-n campaign attempts to increase the compression in layered implosions by reducing the design adiabat from 3.0 down to ∼ 2.6. The experiments utilize nanocrystalline high density carbon ablators driven by a ramped laser pulse drive. Contrary to expectations, the lower design adiabat layered implosion reaches the same level of compression, within the measurement uncertainty, as the previous set of SQ-n layered implosions at the higher design adiabat. Here, we examine potential explanations for this result, including incomplete melting or refreezing of the ablator after the first shock passes into the fuel layer, reproducibility, and dopant areal density. We also discuss additional potential paths to reaching lower adiabat including increased dopant areal density, ramped dopant profiles, and increased initial capsule size which are also based on experimental campaign results from the National Ignition Facility.

Physics - Plasma physics↗

Transport Test Problems for Radiation Detection Scenarios

Modeling forms an important component of radiation detection development, allowing for testing of new detector designs, evaluation of existing equipment against a wide variety of potential threat sources, and assessing operation performance of radiation detection systems. This can, however, result in large and complex scenarios which are time consuming to model. A variety of approaches to radiation transport modeling exist with complementary strengths and weaknesses for different problems. This variety of approaches, and the development of promising new tools (such as ORNL’s ADVANTG) which combine benefits of multiple approaches, illustrates the need for a means of evaluating or comparing different techniques for radiation detection problems. This report presents a set of 9 test problems for comparing different types of radiation transport calculations, identifying appropriate tools for classes of problems, and testing and guiding the development of new methods. Cases are drawn primarily from existing or previous calculations with a preference for cases which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22. From a technical perspective, cases are chosen to span a range of difficulty and to include gamma transport, neutron transport, or both and represent different important physical processes and a range of sensitivity to angular or energy fidelity. Following test case identification, existing information about geometry, measurements, and previous calculations were assembled. Monte Carlo results (MCNP decks) were reviewed or created and re-run in order to attain accurate computational times and to verify agreement with experimental data, when present. Test case information was then conveyed to ORNL in order to guide testing and development of hybrid calculations. The results of those ADVANTG calculations were then sent to PNNL for compilation. This is a report describing the details of the selected test cases and results from available transport codes. Additional results from other transport codes will be added during the next year, along with additional cases if needed for software testing. Future work will extend the test problems to include more extensive cross-code comparisons as well as more refined metrics for evaluating the tradeoffs between operator time, computational time, and solution accuracy, to assemble a formalized benchmark set.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Relativistic MR–MP Energy Levels for L-shell Ions of Silicon

Level energies are reported for Si v, Si vi, Si vii, Si viii, Si ix, Si x, Si xi, and Si xii. The energies have been calculated with the relativistic Multi-Reference Møller–Plesset Perturbation Theory method and include valence and K-vacancy states with nl up to 5f. The accuracy of the calculated level energies is established by comparison with the recommended data listed in the National Institute of Standards and Technology (NIST) online database. The average deviation of valence level energies ranges from 0.20 eV in Si v to 0.04 eV in Si xii. For K-vacancy states, the available values recommended in the NIST database are limited to Si xii and Si xiii. The average energy deviation is below 0.3 eV for K-vacancy states. The extensive and accurate data set presented here greatly augments the amount of available reference level energies. Here, we expect our data to ease the line identification of L-shell ions of Si in celestial sources and laboratory-generated plasmas, and to serve as energy references in the absence of more accurate laboratory measurements.

74 ATOMIC AND MOLECULAR PHYSICS↗

EVOLUTION OF THE COSMIC MICROWAVE BACKGROUND POWER SPECTRUM ACROSS WILKINSON MICROWAVE ANISOTROPY PROBE DATA RELEASES: A NONPARAMETRIC ANALYSIS

Using a nonparametric function estimation methodology, we present a comparative analysis of the Wilkinson Microwave Anisotropy Probe (WMAP) 1-, 3-, 5-, and 7-year data releases for the cosmic microwave background (CMB) angular power spectrum with respect to the following key questions. (1) How well is the power spectrum determined by the data alone? (2) How well is the {Lambda}CDM model supported by a model-independent, data-driven analysis? (3) What are the realistic uncertainties on peak/dip locations and heights? Our results show that the height of the power spectrum is well determined by data alone for multipole l approximately less than 546 (1-year), 667 (3-year), 804 (5-year), and 842 (7-year data). We show that parametric fits based on the {Lambda}CDM model are remarkably close to our nonparametric fits in l-regions where data are sufficiently precise. In contrast, the power spectrum for an H{Lambda}CDM model is progressively pushed away from our nonparametric fit as data quality improves with successive data realizations, suggesting incompatibility of this particular cosmological model with respect to the WMAP data sets. We present uncertainties on peak/dip locations and heights at the 95% (2{sigma}) level of confidence and show how these uncertainties translate into hyperbolic 'bands' on the acoustic scale (l{sub A} ) and peak shift ({phi}{sub m}) parameters. Based on the confidence set for the 7-year data, we argue that the low-l upturn in the CMB power spectrum cannot be ruled out at any confidence level in excess of about 10% ( Almost-Equal-To 0.12{sigma}). Additional outcomes of this work are a numerical formulation for minimization of a noise-weighted risk function subject to monotonicity constraints, a prescription for obtaining nonparametric fits that are closer to cosmological expectations on smoothness, and a method for sampling cosmologically meaningful power spectrum variations from the confidence set of a nonparametric fit.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiation Detection Computational Benchmark Scenarios

Modeling forms an important component of radiation detection development, allowing for testing of new detector designs, evaluation of existing equipment against a wide variety of potential threat sources, and assessing operation performance of radiation detection systems. This can, however, result in large and complex scenarios which are time consuming to model. A variety of approaches to radiation transport modeling exist with complementary strengths and weaknesses for different problems. This variety of approaches, and the development of promising new tools (such as ORNL’s ADVANTG) which combine benefits of multiple approaches, illustrates the need for a means of evaluating or comparing different techniques for radiation detection problems. This report presents a set of 9 benchmark problems for comparing different types of radiation transport calculations, identifying appropriate tools for classes of problems, and testing and guiding the development of new methods. The benchmarks were drawn primarily from existing or previous calculations with a preference for scenarios which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22. From a technical perspective, the benchmarks were chosen to span a range of difficulty and to include gamma transport, neutron transport, or both and represent different important physical processes and a range of sensitivity to angular or energy fidelity. Following benchmark identification, existing information about geometry, measurements, and previous calculations were assembled. Monte Carlo results (MCNP decks) were reviewed or created and re-run in order to attain accurate computational times and to verify agreement with experimental data, when present. Benchmark information was then conveyed to ORNL in order to guide testing and development of hybrid calculations. The results of those ADVANTG calculations were then sent to PNNL for compilation. This is a report describing the details of the selected Benchmarks and results from various transport codes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Probing ground and low-lying excited states for HIO{sub 2} isomers

We present a computational study on HIO{sub 2} molecules. Ground state properties such as equilibrium structures, relative energetics, vibrational frequencies, and infrared intensities were obtained for all the isomers at the coupled-cluster with single and double excitations as well as perturbative inclusion of triples (CCSD(T)) level of theory with the aug-cc-pVTZ-PP basis set and ECP-28-PP effective core potential for iodine and the aug-cc-pVTZ basis set for hydrogen and oxygen atoms. The HOIO structure is confirmed as the lowest energy isomer. The relative energies are shown to be HOIO < HOOI < HI(O)O. The HO(O)I isomer is only stable at the density functional theory (DFT) level of theory. The transition states determined show interconversion of the isomers is possible. In order to facilitate future experimental identification, vibrational frequencies are also determined for all corresponding deuterated species. Vertical excitation energies for the three lowest-lying singlet and triplet excited states were determined using the configuration interaction singles, time-dependent density functional theory (TD-DFT)/B3LYP, TD-DFT/G96PW91, and equation of motion-CCSD approaches with the LANL2DZ basis set plus effective core potential for iodine and the aug-cc-pVTZ basis set for hydrogen and oxygen atoms. It is shown that HOIO and HOOI isomers have excited states accessible at solar wavelengths (<4.0 eV) but these states have very small oscillator strengths (<2 × 10{sup −3})

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thorium Monosilicide, ThSi: An Experimental and Theoretical Study

The present theoretical and experimental combination study investigates the ThSi molecule in detail. Computationally, we utilized high-level multireference and coupled-cluster levels of theory conjoined with large correlation consistent basis sets to study a series of electronic and spin–orbit states of ThSi. Here, we report potential energy curves (PECs), electron configurations at equilibrium distances, spectroscopic constants, energetics, and spin–orbit coupling effects for 16 electronic states of ThSi. The studied 16 electronic states are arranged tightly within 0.9 eV, highlighting the complexity of the electronic spectrum of ThSi. The ground electronic state of ThSi is a single-reference 1 1 Σ + state that derives from the 1σ 2 2σ 2 1π 4 electronic configuration. The Ω = 0 + spin–orbit ground state of ThSi is composed of 1 1 Σ + (47%) and 13Π (44%) electronic states. Our measured bond energy (D0) of ThSi, obtained using resonant two-photon ionization (R2PI) spectroscopy is 3.146(4) eV, where the assigned error limit is given in parentheses in units of the last quoted digits. The computed D0 of ThSi (Ω = 0 + ) at the CBS-C-CCSD(T)-δT(Q)-δDK-δSO level (3.181 eV) is in good agreement with the experimental value. Our derived enthalpy of formation for ThSi, Δ f H 0K o (ThSi(g)), is 971.8(6.0) kJ/mol. Finally, we have performed density functional theory (DFT) calculations for ThSi(1 1 Σ + ) using 16 exchange correlation functionals that span multiple rungs of “Jacob’s ladder” of density functional approximation (DFA) to assess the DFT errors on D 0 , r e , and ω e of ThSi with respect to experimental and ab initio coupled-cluster values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Expression levels of pituitary tumor transforming 1 and glutathione-S-transferase theta 3 are associated with the individual susceptibility to D-galactosamine-induced hepatotoxicity

Although drug-induced liver injury (DILI) is frequently observed, individual variation in the susceptibility to DILI is hard to predict. Intrinsic genetic variation is considered a key element for this variation but little is known about the identity of the genes associated with DILI. In this study, pre-biopsy method was applied to uncover the key genes for D-galactosamine (GalN)-induced liver injury and a cause and effect study was conducted to elucidate the correlation between the expression of uncovered genes and GalN-induced hepatotoxicity. To identify the genes determining the susceptibility to GalN-induced hepatotoxicity, we compared the innate gene expression profiles in the liver tissue pre-biopsied before GalN treatment of the SD rats susceptible and resistant to GalN-induced hepatotoxicity, using microarray. Eight genes including Pttg1, Ifit1 and Gstt3 were lower or higher in the susceptible animals than the resistant and RT-PCR analysis confirmed it. To determine if these genes are associated with the susceptibility to GalN-induced hepatotoxicity indeed, expression levels were measured using real-time PCR in a new set of animals and the correlation with GalN-induced hepatotoxicity were analyzed. Notably, the expression of Pttg1 was significantly correlated with the severity of GalN-induced hepatotoxicity (p < 0.01) and the animals with lowest and highest level of Gstt3 turned out to be the most susceptible and resistant, respectively, demonstrating that the expression of Pttg1 and Gstt3 could predict inter-individual susceptibility to GalN-induced hepatotoxicity. More importantly, this study showed the utility of pre-biopsy method in the identification of the gene for the chemical-induced hepatotoxicity.

60 APPLIED LIFE SCIENCES↗

Lifting at higher levels in the D1D 5 CFT

The D1D 5 P system has a large set of BPS states at its orbifold point. Perturbing away from this ‘free’ point leads to some states joining up into long supermultiplets and lifting, while other states remain BPS. We consider the simplest orbifold which exhibits this lift: that with N = 2 copies of the free c = 6 CFT. We write down the number of lifted and unlifted states implied by the index at all levels upto 6. We work to second order in the perturbation strength λ. For levels upto 4, we find the wavefunctions of the lifted states, their supermultiplet structure and the value of the lift. All states that are allowed to lift by the index are in fact lifted at order O(λ 2 ). We observe that the unlifted states in the untwisted sector have an antisymmetry between the copies in the right moving Ramond ground state sector, and extend this observation to find classes of states for arbitrary N that will remain unlifted to O(λ 2 )

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time-dependent THMC properties and microstructural evolution of damaged rocks in excavation damage zone

Modeling coupled thermo-hydro-mechanical-chemical (THMC) processes in host rocks near high-level nuclear waste (HLW) repositories at various time scales is an extremely challenging task. The current study integrates experimental, theoretical, and numerical methods in assessing the evolution of excavation damage zone (EDZ) over time and its implication on the long-term migration of hazardous species. Argillite and rock salt and are the focus of this study. The first part of the report presents a novel time-dependent directional microcrack damage theory for generic brittle rocks. It features detailed statistical description of the microcracks within a damaged solid, permitting a direct upscaling of microscale processes such as crack growth kinetics, crack closure/opening, sliding friction to explain the macroscopic creep, nonlinear elasticity, shear dilation, and loading-unloading hysteresis. This provides a basic platform for describing the anisotropic mechanical and transport properties of damaged rocks during excavation and subsequent THMC loadings. The model is validated and numerically implemented to Finite Element (FE) package ABAQUS through the user-defined material (UMAT) interface and have demonstrated great potential in resolving the time-dependent and anisotropic evolution of damage in the EDZ. The second part of the report presents a multi-scale experimental effort in characterizing the thermal, hydraulic, and mechanical properties of Mancos shale and Avery Island salt. For the Mancos shale, triaxial compression tests are performed at different confining pressures and temperatures to probe its thermomechanical properties relevant to HLW repositories. The obtained stress-strain data are interpreted using the proposed directional damage theory. Post-test specimens are subjected to gas permeability tests to reveal the correlation between permeability and the degree of microcracking. At microscale, temperature-controlled nanoindentation tests are performed and found a linear correlation between fracture toughness and elastic modulus from 25°C to 300°C. For Avery Island salt, we have designed and manufactured a novel relative-humidity controlled uniaxial creep device. Long-term creep tests at low stresses (< 5 MPa) are performed at different levels of relative humidity (RH). Besides confirming the much higher creep rates as one would expect through extrapolating the high-stress creep data, the results reveal that the steady-state creep rate of rock salt is strongly dependent on the ambient RH, an aspect that is often neglected in the literature. Both behaviors can be attributed to the pressure-solution creep mechanism which dominates at low stress and high RH levels. The third part of the report explores a set of numerical strategies in modeling the THMC behavior of porous geomaterials. A fully implicit, monolithic FE solution that can flexibly interface with different material models and coupling mechanisms for THMC problems is developed and verified through the ABAQUS user-defined element (UEL) interface. The scheme is used to study the THM response of a hypothetical HLW storage site with reference to an existing in-situ heater test. Strategies for integrating the UEL and the microcrack UMAT are suggested. Another numerical endeavor of this study is to implement a higher-order asymptotic homogenization method to account for the heterogeneous porous structures. The same method is then extended to perform microstructure-informed thermo-mechanical modeling of generalized continua. The above outcomes of this project provide a strong thrust towards enhancing the fundamental understanding and modeling capability of the long-term evolution of host rocks in EDZ, thus helping achieve the design goal of 1-million-year isolation of high-level nuclear wastes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multitask methods for predicting molecular properties from heterogeneous data

Data generation remains a bottleneck in training surrogate models to predict molecular properties. We demonstrate that multitask Gaussian process regression overcomes this limitation by leveraging both expensive and cheap data sources. In particular, we consider training sets constructed from coupled-cluster (CC) and density functional theory (DFT) data. We report that multitask surrogates can predict at CC-level accuracy with a reduction in data generation cost by over an order of magnitude. Of note, our approach allows the training set to include DFT data generated by a heterogeneous mix of exchange–correlation functionals without imposing any artificial hierarchy on functional accuracy. More generally, the multitask framework can accommodate a wider range of training set structures—including the full disparity between the different levels of fidelity—than existing kernel approaches based on Δ-learning although we show that the accuracy of the two approaches can be similar. Consequently, multitask regression can be a tool for reducing data generation costs even further by opportunistically exploiting existing data sources.

Chemistry↗

Search for new particles decaying to ZZ using final states with leptons and jets with the ATLAS detector in root s=7 TeV proton-proton collisions

A search is presented for a narrow resonance decaying to a pair of Z bosons using data corresponding to 1.02 fb{sup -1} of integrated luminosity collected by the ATLAS experiment from pp collisions at {radical}s = 7 TeV. Events containing either four charged leptons ({ell}{ell}{ell}{ell}) or two charged leptons and two jets ({ell}{ell}jj) are analyzed and found to be consistent with the Standard Model background expectation. Lower limits on a resonance mass are set using the Randall-Sundrum (RS1) graviton model as a benchmark. Using both {ell}{ell}{ell}{ell} and {ell}{ell}jj events, an RS1 graviton with k/{bar m}{sub pl} = 0.1 and mass between 325 and 845 GeV is excluded at 95% confidence level. In addition, the {ell}{ell}{ell}{ell} events are used to set a model-independent fiducial cross section limit of {sigma}{sub fid}(pp {yields} X {yields} ZZ) < 0.92 pb at 95% confidence level for any new sources of ZZ production with m{sub ZZ} greater than 300 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fault-tolerant resource comparison of qudit and qubit encodings for diagonal quadratic operators

Finite local Hilbert-space truncations arise naturally in quantum simulations of lattice field theories and motivate qudit encodings, but their fault-tolerant advantage over qubit encodings remains unclear. We compare the non-Clifford cost of implementing quadratic diagonal evolutions, exemplified by 𝑈 = 𝑒$^{−𝑖⁢𝑡⁢𝜙^2_𝑥}$ in a uniform field-amplitude discretization of a real scalar field, using either one logical 𝑑-level qudit or 𝑛 𝑏 = ⌈log 2⁡ 𝑑⌉ logical qubits. We analyze two standard settings: product-formula simulation and linear combination of unitaries (LCU) per block encoding, taking the resource metric to be the number of non-Clifford gates after synthesis into a discrete logical gate set. Because tight synthesis bounds for general single-qudit rotations are not known, we express the qudit constructions in terms of embedded two-level SU⁡(2) rotations and derive explicit finite-𝑑 break-even conditions for their synthesis cost; these serve as compiler targets for when qudit encodings can outperform the qubit baseline. Within the constructive models studied here, product-formula implementations would require an exponentially stronger per-primitive synthesis advantage for qudits to win asymptotically, while in the LCU setting the qubit encoding is asymptotically cheaper in 𝑑. Nevertheless, the finite-𝑑 threshold analysis identifies low-dimensional regions in which qudits can yield meaningful constant-factor savings, particularly for LCU-based implementations. As a secondary analysis of the LCU construction, we use an idealized negligible-overhead qubit-qudit code-switching model to give an absolute 𝑇-count comparison and reinterpret the savings as an allowable per-switch overhead budget.

Godwood, Samuel [Univ. of Liverpool (United Kingdo↗

Electronic density of states of a U ( 1 ) quantum spin liquid with spinon Fermi surface. I. Orbital magnetic field effects

A quantum spin liquid with a spinon Fermi surface is an exotic insulator that hosts neutral Fermi surfaces inside the insulating gap. In an external magnetic field, it has been pointed out that the neutral Fermi surfaces are Landau quantized to form Landau levels due to the coupling to the induced emergent gauge magnetic field. In this paper, we calculate the electronic density of states (as observed in tunneling experiments) of the quantum spin liquid in an orbital magnetic field. Here, we find that the Landau levels from the neutral Fermi surfaces give rise to a set of steps emerging at the upper and lower Hubbard band edges. Each of the Hubbard band edge steps further develop into a band edge resonance peak when a weak gauge binding arising from the gauge field fluctuations is taken into account. Importantly, each Hubbard band edge step and its resulting resonance peak in the weak gauge binding are found to have a corresponding Landau level from the neutral Fermi surfaces, so the Hubbard band edge steps and the band edge resonance peaks provide signatures to the unique feature that characterizes the Landau quantization of the in-gap neutral Fermi surfaces in the spin liquid. We further consider the strong gauge-binding regime where the band edge resonance peaks move into the Mott gap and develop into true in-gap bound states. In the strong gauge binding regime, we solve the Landau-level spectrum of the in-gap bound states in an orbital magnetic field. For the in-gap bound state with a Mexican-hat-like band dispersion, we find that the envelop energy to have a state excited from the bound state Landau levels decreases quadratically with the magnetic field. The quadratic decrease behavior of the envelop energy is consistent with the intuition that applying magnetic field localizes the states and energetically promotes the in-gap bound states formation. Finally, we discuss the connection of our results to the electronic density of states spectra measured in the layered 1T-TaS 2 . We point out that a quantum spin liquid with a quasibound state in the upper Hubbard band can give the density of states spectra similar to the one measured in the experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Next-to-leading order QCD predictions for the signal of dark matter and photon associated production at the LHC

We study the potential of the LHC to discover the signal of dark matter associated production with a photon induced by a dimension six effective operator, including next-to-leading order QCD corrections. We investigate the main backgrounds from the standard model, i.e. Z boson and a photon associated production with invisible decay of Z boson, and Z boson and a jet production with the jet misidentified as a photon. We find that the p{sub T}{sup {gamma}} distributions of the backgrounds decrease faster than that of the signal with increasing of the transverse momentum of the photon. The {eta}{sup {gamma}} distributions of the backgrounds are almost flat in the full range of {eta}{sup {gamma}}. In contrast, the signal lies mainly in the central region of {eta}{sup {gamma}}. These characteristics may help to select the events in experiments. We show that in the parameter space allowed by the relic abundance constraint, which we have calculated at the next-to-leading-order QCD level, the LHC with {radical}(S)=7 TeV may discover this signal at the 5{sigma} level after collecting an integrated luminosity of 1 fb{sup -1}. On the other hand, if this signal is not observed at the LHC, we can set a lower limit on the new physics scale at the 3{sigma} level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Auto-ignitive deflagration speed of methane (CH 4 ) blended dimethyl-ether (DME)/air mixtures at stratified conditions

Front propagation speeds from fully resolved unsteady one dimensional simulations with dimethyl-ether (DME)/methane (CH 4 )/air mixtures under engine relevant conditions are presented using complex kinetics and transport. Different time-scales of monochromatic inhomogeneities in DME concentration with varying DME/CH 4 blending ratios are simulated to unravel the fundamental aspects of auto-ignition and flame propagation under the influence of reactivity stratification. To understand the influence of different stratification time-scales on the flame-ignition interaction, two sets of conditions are simulated such that low temperature chemistry is present in only one of them. For a given amplitude of stratification, it is found that the instantaneous propagation speed is significantly affected by the level of CH 4 concentration in the binary fuel blend. Specifically, for cases with low temperature chemistry, at relatively smaller time-scales, the overall fluctuation in the instantaneous propagation speed is found to subside as the level of CH 4 concentration in the mixture is increased. However, for both sets of conditions, at comparatively larger time-scales, a rapid change in the instantaneous propagation speed is observed with an increase in the level of CH 4 concentration in the mixture. The intrinsic effects of stratification time-scales on the low temperature chemistry and the high temperature chemistry are further examined to assess the flame-ignition interaction. A displacement speed analysis is also carried out to elucidate the underlying combustion modes that are responsible for such a variation in flame response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗