Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “L REACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Quantity of 135I Released from the AGR 5/6/7 Experiment

A series of four Advanced Reactor Technologies (ART) experiments have been conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). From 2006 through 2020, these experiments supported the development and qualification of the new U.S. tristructural isotropic (TRISO) particle fuel for Very High Temperature Reactors (VHTR). Each Advanced Gas Reactor (AGR) experiment consisted of multiple fueled capsules, each plumbed for independent temperature control using a mix of helium and neon gases. The gas leaving a capsule was routed to individual Fission Product Monitor (FPM) detectors. For intact fuel particles, the TRISO particle coatings provide a substantial barrier to fission product release. However, particles with failed coatings, whether because of a minute percentage of initially defective particles, those which fail during irradiation, or those designed to fail (DTF) particles, can release fission products to the flowing gas stream. Because reactive fission product elements like iodine and cesium quickly deposit on cooler capsule components and piping structures as the effluent gas leaves the reactor core, only the noble fission gas isotopes of Kr and Xe tend to reach FPM detectors. The FPM system utilizes High Purity Germanium (HPGe) detectors coupled with a thallium activated sodium iodide NaI(Tl) scintillator. The HPGe detector provides individual isotopic information, while the NaI(Tl) scintillator is used as a gross count rate meter. During irradiation, the 135mXe concentration reaching the FPM detectors is from both direct fission and by decay of the accumulated 135I. About 2.5 hours after irradiation (ten 15.3 minute 135mXe half lives) the directly produced 135mXe has decayed and only the longer lived 135I remains as a source. Decay systematics dictate that 135mXe will be in secular equilibrium with its 135I parent, such that its production rate very nearly equals the decay rate of the parent, and its concentration in the flowing gas stream will appear to decay with the parent half life. This equilibrium condition enables the determination of the amount of 135I released from the fuel particles by measurement of the 135mXe at the FPM following reactor shutdown. In this paper, the 135I released will be reported.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A coupled TH/Neutronics/CRUD framework in prediction of CIPS phenomenon

A coupled TH/Neutronics/CRUD framework, which is able to simulate the CRUD deposits impact on CIPS phenomenon, was described in this paper. The coupling among three essential physics, thermal-hydraulics, CRUD and neutronics described in the framework was implemented by using CFD software STAR-CCM+, developing CRUD module, and using the neutronics code DeCART. The coupling among these codes was implemented by exchanging data between them using intermediate exchange files. A typical 3 by 3 PWR fuel pin problem was solved under this framework and the results were presented. Time-dependent solutions were provided for a 12-month simulation, including CRUD deposits inventory and their distributions on fuel rods, boron hideout amount inside CRUD deposits, as well as power shape changing over time. The results clearly showed the power shape suppression in regions where CRUD deposits exist, which is a clear indication of CIPS phenomenon. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Control rod reactivity measurement by rod-drop method at a fast critical assembly

Rod-drop experiments were carried out to estimate the reactivity of the control rod of a fast critical assembly operated by CAEP. Two power monitor systems were used to obtain the power level and integration method was used to process the data. Three experiments were performed. The experimental results of the reactivity from the two power monitor systems were consistent and showed a reasonable range of reactivity compared to results from positive period method. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Aerosol retention during SGTR meltdown sequences: Experimental insights of the effect of size and shape of the breach

This paper summarizes the major insights gained from aerosol retention capability of a tube bundle that simulates the break stage of the secondary side of a failed steam generator under dry SGTR conditions. This scenario is highly relevant in nuclear safety since it affects the potential retention of radioactive particles in case of meltdown sequences with a SGTR. An 8-test experimental campaign has been carried out, extending the current database on the decontamination capability of the steam generator. The effects of the breach features (shape and size) and the particle nature (SiO{sub 2} and TiO{sub 2}) on the collection efficiency have been explored. The results confirmed the strong effect of the physical nature even when tube breaks in a fish-mouth mode. Loose aggregates (i.e. TiO{sub 2}) would be trapped to a limited extent (less than 25%); while single- or few-aggregates (i.e. SiO{sub 2}) would undergo a quite effective removal (i.e. over 75%). For fish-mouth breaches and SiO{sub 2} particles, the breach size has been found to moderately affect retention efficiency. Furthermore, the breach shape does not seem to have any effect on the net collection efficiency within the break stage, no matter the particle type. However, individual tube measurements indicate notably different deposition patterns, although an effect of the facility geometry cannot be disregarded as a key player in this observation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

AGR-5/6/7 Thermal Model with Non-uniform Gas Gaps

Fuel compact temperatures are a crucial factor in assessing the irradiation performance of tri-structural isotropic fuel particles. In the absence of direct measurement, fuel compact temperatures were calculated using a three-dimensional finite element thermal model, which is subject to simulation uncertainty. The most dominant factor in the uncertainty of calculated fuel temperatures is the gas gap uncertainty due to the nub-to-shell clearance caused by a design error of AGR-5/6/7 capsules. The thermal model was revised to examine the most probable graphite offset position for six different days during the irradiation for Capsules 1 and 2. The analysis varied the offset distance and azimuthal direction at both the top and bottom of the holder. The best-fit offset was estimated based on the minimum root mean square error of the residuals (measured minus calculated) for the operational thermocouples (TCs). From these results, the following conclusions were made: (1) The holder offsets led to slightly lower average temperatures but wider temperature variations (lower minimum and higher peak fuel temperatures) for both Capsule 1 and Capsule 2. (2) During earlier cycles (162A–164B), when numerous TCs were still operational, the best-fit offset distance varied over a specific range for both the top and bottom ([0.002–0.0035 in.] for Capsule 1 and [0.003-0.004 in] for Capsule 2). In contrast, the offset azimuthal direction varied widely, especially for the offset at the bottom of the Capsule 1 holder. This is because holder movement was somewhat constrained at the top of Capsule 1 by the TC leads running through the capsule head and into the holder and by the through tubes in Capsule 2, but the Capsule 1 bottom did not have this type of constraint. (3) During later cycles, when all TCs failed, applying the maximum possible offset of 0.006 in. to the northwest direction for both the top and bottom resulted in a calculated peak fuel temperature of 1557? in Capsule 1 (i.e., a 135? increase from 1422? with zero offset on September 20, 2019 (166A)); the maximum offset of 0.0068 in. to the south for both top and bottom resulted in a calculated peak fuel temperature of 1110°C in Capsule 2 on April 20, 2020 (i.e., a 116? increase from 994? with zero offset (168A)). High peak fuel temperatures in Capsule 1 during Cycle 166A could be the cause of massive particle failure near the end of this cycle. (4) Even though the highest temperature at the tip of Type-N TCs, such as TC-1-7, slightly exceeded 1000?, the temperature along the TC wire reached as high as 1335? assuming an offset of 0.006 in. in the northwest of Capsule 1 holder near the end of Cycle 166A. This temperature significantly exceeds the temperature threshold at which TC degradation is expected to occur, ultimately contributing to considerable particle failures in Capsule 1. For eight Type-N TCs in Capsule 2, the peak TC line temperature was much lower (i.e., 1029°C for TC-2-5), assuming maximum offset of 00068 in. to the south during cycle 168A.

advanced gas reactors↗

Data Analyst - A Device for Continuous Repeating Real-Time Assay of HPGe, CZT, or Scintillation Gamma Spectra - 18574

There are many situations where a continuous repeating series of quantitative gamma spectral assays is desirable. These include measurements of fluid going through a pipe, of items on a conveyor passing under a detector, a detector aimed at the ground on a moving platform, or a detector in free air as a plume of radioactivity drifts by. While Canberra and many others have built and deployed many of these devices, they have all been custom built for that particular application, and rather expensive. The Data Analyst [DA] is a general purpose device that is designed to fulfill many of these applications without modification, but can be fairly-easily modified if needed. The DA is a small [12 x 18 x 5 cm], low-power [3 W] box that accepts the input from external MCAs, controls the acquisition cycle, analyzes the results, and transmits them to the outside world when needed. The detector-MCAs supported are HPGe with Lynx MCA, NaI or CeBr or LaBr with Osprey MCA, and CZT or CsI with internal MCAs. The DA internal software used for analysis is the full standard Genie analysis software, which is very widely used and well accepted in the industry. This allows exported spectral files to be reviewed and confirmed by Experts, and reanalyzed if needed. The DA hardware is totally autonomous. As soon as power is applied, it starts the pre-programmed sequences of acquisition and analysis. Multiple analysis sequences [called Workflows] can be in operation simultaneously, e.g. with different count times and different nuclide libraries. Only the detector with MCA, and the DA are required in the field. A PC can be connected to the DA locally or remotely via WiFi, USB, or Ethernet. The PC is needed to setup the DA, and to readout the results. The DA also supports [with application-specific programming] external Inputs/Outputs either for recording with the analysis results or for use in the computation of the result, e.g. temperature, flow rate, pressure, ... ]. The DA also has an internal GPS receiver with external antenna. Applications of the DA that are discussed include stack gas effluent activity where a portion of the effluent stream was extracted to flow through a shield with a HPGe detector and Lynx MCA, and measurement of reactor coolant activity where a shielded CZT detector and MCA were aimed at various sections of reactor primary coolant during a maintenance outage. Potential other applications are also described. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A new international standard on cybersecurity for nuclear power plants: IEC 62645 - cybersecurity requirements - 161

This paper provides an overview of the IEC 62645, an actual standard by the International Electrotechnical Commission (IEC) focused on the issue of requirements for computer security programmes and system development processes to prevent and/or minimize the impact of cyber attacks against computer-based I and C systems. Developed since 2009 and published end of 2014, the standard is intended to be used for changing or establishing new security programmes for I and C systems of operating and new Nuclear Power Plants (NPP). This paper also presents the key issues being considered in the new revision to IEC 62645, currently in process. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nuclear power plant instrumentation and control cyber security common vector access leading to relational common cause failures - 340

Nuclear power plants and facilities have been implementing digital system upgrades into their previously analog systems for well over twenty years. New nuclear facilities' control, security, and emergency preparedness systems are almost exclusively built on digital architectures with a high degree of communication between the various systems that are often integrated together into a central control station to aid in operation or security of the facility. As digital systems become more widespread in nuclear facility control system architectures, cyber security related issues have become a significant concern to operators, regulators, governments, and other groups. Among the many concerns related to digital systems and cyber security is the area of common cause and common mode failures. This paper introduces, defines, and discusses some sources of common cause failure from a cyber security perspective: common vector access. This refers to specific access points that an adversary can exploit through a single attack sequence that have the potential to provide relational failures through common cause on multiple components, subsystems, systems, or plants. This paper will further discuss interconnected processes where these access points may exist, the importance of limiting or controlling these pinch points, and some methods of protecting common vector access points. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Verification and Validation of CFD Simulations involving Twin Rectangular Jets using Steady RANS in Star-CCM+

Analyses such as component design and safety analysis can be conducted through careful application of computational fluid dynamics (CFD) codes. Before these codes can be considered ready for specific analysis, benchmarking (validation) against applicable datasets is needed. The twin jet water facility (TJWF) developed originally at the University of Tennessee, Knoxville has been purposed for aiding in this type of work. The TJWF allows for large data sets to be created using state of the art non-invasive measurement techniques within a mostly transparent testing volume. Utilizing velocity data collected in the TJWF by Wang et. al., the Star-CCM+ code was benchmarked a using steady Reynolds averaged Navier Stokes (RANS) framework for a combining two jet case. Careful efforts to properly conduct verification of the numerical work was undertaken with a sample reported in this summary. The computational results were validated against the experimental work and found to be within acceptable limits. The parameters of interest were the merging and combining points (MP and CP) of the twin jets, and the velocity profiles at increasing heights after injection. Fig.1 provides a graphical depiction of the twin jets combining within a free shear volume with key geometric factors included. The MP and velocity profiles were predicted with reasonable agreement. Whereas, the combining point of the twin jets was found to be over-predicted by {approx}24% difference. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

ELIMINATING CONSERVATISM IN THE PIPING SYSTEM ANALYSIS PROCESS THROUGH APPLICATION OF A SUITE OF LOCALLY APPROPRIATE SEISMIC INPUT MOTIONS

Seismic analysis is of great importance in the evaluation of nuclear systems due to the heavy influence such loading has on their designs. Current Department of Energy seismic analysis techniques for a nuclear safety-related piping system typically involve application of a single conservative seismic input applied to the entire system [1]. A significant portion of this conservatism comes from the need to address the overlapping uncertainties in the seismic input and in the building response that transmits that input motion to the piping system. The approach presented in this paper addresses these two sources of uncertainty through the application of a suite of 32 input motions whose collective performance addresses the total uncertainty while each individual motion represents a single variation of it. It represents an extension of the soil-structure interaction analysis methodology of SEI/ASCE 43-05 [2] from the structure to individual piping components. Because this approach is computationally intensive, automation and other measures have been developed to make such an analysis efficient. These measures are detailed in this paper.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

SIMULATION OF RADIATION BACKGROUNDS ASSOCIATED WITH NUCLEAR DIAGNOSTICS IN THE NATIONAL IGNITION FACILITY

Experiments resulting in a significant neutron yield are scheduled to start in 2010 at the National Ignition Facility (NIF). Several experiments utilizing Tritium-Hydrogen-Deuterium (THD) and Deuterium-Tritium (DT) targets are scheduled as part of the National Ignition Campaign (NIC). A wide range of diagnostics will be used to measure several parameters of implosion such as the core and fuel shape, temperatures and densities, and neutron yield. Accurate evaluations of the neutron and gamma backgrounds are important for several diagnostics, such as the High Energy X-ray Imager (HEXRI) and Neutron-Time-Of-Flight (nTOF). Several sources of neutron and gamma backgrounds will impact the accuracy of the diagnostics measurements. Fusion neutrons generated by fuel burn and secondary neutrons resulting from the fusion neutrons interaction with structures present inside and outside the Target Chamber (TC) contribute to the neutron background. In the meantime, X-rays emitted from the implosion, X-rays resulting from Laser Plasma Interaction (LPI) of NIF beams with the hohlraum, and gamma-rays induced by neutron interactions with different structures inside and outside the TC contribute to the gamma background. A detailed model has been developed of the NIF facility and all structures inside the TC. Several Monte-Carlo simulations were performed to identify the expected signal-to- background ratios at several potential locations for the HEXRI and nTOF diagnostics. Gamma backgrounds associated with HEXRI were significantly reduced by using a tungsten collimator. The collimator resulted in the reduction of the gamma background at the HEXRI scintillator by more than an order of magnitude during the first 40 ns following a THD shot. The nTOF20 detectors inside the Neutron Spectrometry room are exposed to low levels of neutron and gamma background during yield shots.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Human Factors Engineering Insights and Guidance for Implementing Innovative Technologies from the Nuclear Innovation Workshop: A Summary Report

The Nuclear Innovation Workshop was sponsored by the United States Department of Energy Light Water Reactor Sustainability Program and held at Idaho National Laboratory on June 26-28, 2019. The objectives of this workshop were to [1] promote an innovation ecosystem that reduces cost and risk through early evaluations, [2] provide hands-on activities that demonstrate the value of using advanced tools, methods, and capabilities offered by the Light Water Reactor Sustainability Program, [3] provide a platform to enable broad innovation in the nuclear industry, [4] enable industry leaders the opportunity for networking and sharing of their experiences, and [5] take inspiration from other industries to push the envelope for transformation in the nuclear industry. These objectives were supported through the facilitation of detailed discussions and industry presentations that were presented within the context of a four-phased approach to nuclear innovation. Open conversation about key challenges and considerations for innovation in the nuclear industry was collected at each of facilitated discussions, which were focused on one of the four phases (see Section 3). Further, a survey was administered to attendees at the close of workshop to collect feedback on the quality of the workshop and their impressions of future initiatives for promoting an innovation ecosystem such as with developing an Innovation Portal or establishing an Innovation Working Group (see Section 4). Key recommendations that came from the workshop broadly included the development of an Innovation Portal, establishment of an Innovation Working Group, and subsequent meetings with industry partners including utilities, vendors, and research organizations to exchange lessons learned in innovation, progress of the Innovation Portal, and other related matters specific to nuclear innovation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Modernization of Technical Requirements for Licensing of Advanced Non-Light Water Reactors: LMP Lessons Learned, Best Practices, and Frequently Asked Questions

This report captures lessons learned, best practices, and frequently asked questions with responses gleaned from the experiences of early adopters of the LMP RIPB process. Interviews were conducted in late 2019 with five non-LWR design organizations to gather their feedback on the application of the LMP RIPB process under real production conditions. The overall feedback from the reactor developers is that the LMP RIPB process can be successfully implemented with material benefits to the designer. As with any new processes, numerous challenges and questions were relayed by the designers. These challenges have been translated into lessons learned and best practices. Those two sections address both technical and organizational aspects of implementing the LMP RIPB process. Questions that were asked by multiple designers were turned into “frequently asked questions” and responses were provided by the LMP team.

42 ENGINEERING↗

A preliminary user-friendly, digital console for the control room parameters supervision in old-generation Nuclear Plants

Improvements in the awareness of a system status is an essential requirement to achieve safety in every kind of plant. In particular, in the case of Nuclear Power Plants (NPPs), a progress is crucial to enhance the Human Machine Interface (HMI) in order to optimize monitoring and analyzing processes of NPP operational states. Firstly, as old-fashioned plants are concerned, an upgrading of the whole console instrumentation is desirable in order to replace an analog visualization with a full-digital system. In this work, we present a novel instrument able to interface the control console of a nuclear reactor, developed by using CompactRio, a National Instruments embedded architecture and its dedicated programming language. This real-time industrial controller composed by a real-time processor and FPGA modules has been programmed to visualize the parameters coming from the reactor, and to storage and reproduce significant conditions anytime. This choice has been made on the basis of the FPGA properties: high reliability, determinism, true parallelism and re-configurability, achieved by a simple programming method, based on LabVIEW real-time environment. The system architecture exploits the FPGA capabilities of implementing custom timing and triggering, hardware-based analysis and co-processing, and highest performance control algorithms. Data stored during the supervisory phase can be reproduced by loading data from a measurement file, re-enacting worthwhile operations or conditions. The system has been thought to be used in three different modes, namely Log File Mode, Supervisory Mode and Simulation Mode. The proposed system can be considered as a first step to develop a more complete Decision Support System (DSS): indeed this work is part of a wider project that includes the elaboration of intelligent agents and meta-theory approaches. A synoptic has been created to monitor every kind of action on the plant through an intuitive sight. Furthermore, another important aim of this work is the possibility to have a front panel available on a web interface: CompactRio acts as a remote server and it is accessible on a dedicated LAN. This supervisory system has been tested and validated on the basis of the real control console for the 1-MW TRIGA reactor RC-1 at the ENEA, Casaccia Research Center. In this paper we show some results obtained by recording each variable as the reactor reaches its maximum level of power. The choice of a research reactor for testing the developed system relies on its training and didactic importance for the education of plant operators: in this context a digital instrument can offer a better user-friendly tool for learning and training. It is worthwhile to remark that such a system does not interfere with the console instrumentation, the latter continuing to preserve the total control. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Phased Array Ultrasonic Examination of Reactor Coolant System (Carbon Steel-to-CASS) Dissimilar Metal Weld Mockup Specimen

In the summer of 2009, Pacific Northwest National Laboratory (PNNL) staff traveled to the Electric Power Research Institute (EPRI) NDE Center in Charlotte, North Carolina, to conduct phased-array ultrasonic testing on a large bore, reactor coolant pump nozzle-to-safe-end mockup. This mockup was fabricated by FlawTech, Inc. and the configuration originated from the Port St. Lucie nuclear power plant. These plants are Combustion Engineering-designed reactors. This mockup consists of a carbon steel elbow with stainless steel cladding joined to a cast austenitic stainless steel (CASS) safe-end with a dissimilar metal weld and is owned by Florida Power & Light. The objective of this study, and the data acquisition exercise held at the EPRI NDE Center, were focused on evaluating the capabilities of advanced, low-frequency phased-array ultrasonic testing (PA-UT) examination techniques for detection and characterization of implanted circumferential flaws and machined reflectors in a thick-section CASS dissimilar metal weld component. This work was limited to PA-UT assessments using 500 kHz and 800 kHz probes on circumferential flaws only, and evaluated detection and characterization of these flaws and machined reflectors from the CASS safe-end side only. All data were obtained using spatially encoded, manual scanning techniques. The effects of such factors as line-scan versus raster-scan examination approaches were evaluated, and PA-UT detection and characterization performance as a function of inspection frequency/wavelength, were also assessed. A comparative assessment of the data is provided, using length-sizing root-mean-square-error and position/localization results (flaw start/stop information) as the key criteria for flaw characterization performance. In addition, flaw signal-to-noise ratio was identified as the key criterion for detection performance.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Irradiation effects in tungsten-copper laminate composite

Tungsten-copper laminate composite has shown promise as a structural plasma-facing component as compared to tungsten rod or plate. The present study evaluated the tungsten-copper composite after irradiation in the High Flux Isotope Reactor (HFIR) at temperatures of 410-780°C and fast neutron fluences of 0.02-9.0×1025 n/m2, E>0.1 MeV, 0.0039-1.76 displacements per atom (dpa) in tungsten. Tensile tests were performed on the composites, and the fracture surfaces were analyzed with scanning electron microscopy. Before irradiation, the tungsten layers had brittle cleavage failure, but the overall composite had 15.5% elongation at 22°C. After only 0.0039 dpa this was reduced to 7.7% elongation, and no ductility was observed after 0.2 dpa at all irradiation temperatures when tensile tested at 22°C. For elevated temperature tensile tests after irradiation, the composite only had ductile failure at temperatures where the tungsten was delaminating or ductile.

Garrison, L. M.↗

Production of Biodiesel at Kinetic Limit Achieved in a Centrifugal Reactor/Separator

The kinetics of the transesterification of soybean oil has been investigated in a centrifugal reactor at temperatures from 45 to 80 C and pressures up to 2.6 bar using gas chromatography flame ionization detection (GC-FID) and infrared (IR) spectroscopy. The yields of product methyl esters were quantified using IR, proton Nuclear Magnetic Resonance (H1NMR), and viscosity measurements and were found to achieve 90% of the yield in 2 min; however, to meet ASTM specifications with one pass through the reactor, a 15 min residence time was needed. Performance was improved by sequential reactions, allowing separation of by-product glycerine and injection of additional small aliquots of methanol. The kinetics was modeled using a three-step mechanism of reversible reactions, which was used to predict performance at commercial scale. The mechanism correctly predicted the exponential decline in reaction rate as the concentration of the products allowed significant reverse reactions to occur.

10 SYNTHETIC FUELS↗

ATR NSUF Instrumentation Enhancement Efforts

A key component of the Advanced Test Reactor (ATR) National Scientific User Facility (NSUF) effort is to expand instrumentation available to users conducting irradiation tests in this unique facility. In particular, development of sensors capable of providing real-time measurements of key irradiation parameters is emphasized because of their potential to increase data fidelity and reduce posttest examination costs. This paper describes the strategy for identifying new instrumentation needed for ATR irradiations and the program underway to develop and evaluate new sensors to address these needs. Accomplishments from this program are illustrated by describing new sensors now available to users of the ATR NSUF. In addition, progress is reported on current research efforts to provide improved in-pile instrumentation to users.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗