Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPORTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Finite element analysis of transonic flows in cascades: Importance of computational grids in improving accuracy and convergence

The finite element method is applied for the solution of transonic potential flows through a cascade of airfoils. Convergence characteristics of the solution scheme are discussed. Accuracy of the numerical solutions is investigated for various flow regions in the transonic flow configuration. The design of an efficient finite element computational grid is discussed for improving accuracy and convergence.

Ecer, A.↗

On the importance of reverse current ohmic losses in electron-heated solar flare atmospheres

The passage of a beam of nonthermal electrons through the flaring solar atmosphere is considered, paying particular attention to the requirement that the beam be stable to the generation of plasma turbulence. The ratio is computed of energy losses due to reverse current ohmic heating, and heating by Coulomb collisions, respectively, for the greatest flux which can pass stably through the atmosphere. It is demonstrated that this ratio is determined by the low energy cutoff of the beam, by the electron temperature of the ambient atmosphere, and by the electron to ion temperature ratio. It is also independent of the atmospheric density.

Emslie, A. G.↗

Some important geometrical features of conic-section-generated offset reflector antennas

Geometrical characteristics of conic-section-generated offset reflectors are studied in a unified fashion. Some unique geometrical features of the reflector rim constructed from the intersection of the reflector surface and a cone or cylinder are explored in detail. It is found that the intersection curve (rim) of the rotationally generated conic-section reflector surface and a circular cone with its tip at the focal point is always a planar curve and has a circular projection on the focal plane only for the offset parabolic reflector. Furthermore, in this case, the line going through the center of the circle, parallel to the focal axis, and the central axis of the cone do not intersect the reflector surface at the same point. Numerical results are presented to demonstrate some unique features of offset parabolic reflectors.

Jamnejad-Dailami, V.↗

The Shuttle and its importance to space medicine

The physiological effects of space flights on humans are reviewed, and the opportunities offered by frequent and repetitive Space Shuttle flights for space medical research are discussed. The most significant changes encountered in the vestibular, cardiopulmonary, musculoskeletal and hematopoietic systems during and after past space missions are indicated, and the time courses of the physiological shifts associated with space acclimatization and readaptation to a 1-g environment are summarized. Effects directly attributable to the absence of gravity, including postural changes and fluid shifts, are considered, and additional contributing factors to physiological changes imposed by the spacecraft operational environment are pointed out. Differences between the Space Shuttle missions and all previous missions in the areas of reentry profiles and varied crew composition are discussed, and results of experiments on the relative acceleration tolerances of men and women of different ages and the usefulness of the anti-g suit are presented. Directions for future research in space medicine available with the Shuttle are examined, with particular emphasis on the neurovestibular system cardiopulmonary dynamics, calcium metabolism, the erythropoietic system and the effects of space radiation.

Nicogossian, A.↗

Stereographic observations from geosynchronous satellites - An important new tool for the atmospheric sciences

Observations of cloud geometry using scan-synchronized stereo geostationary satellites having images with horizontal spatial resolution of approximately 0.5 km, and temporal resolution of up to 3 min are presented. The stereo does not require a cloud with known emissivity to be in equilibrium with an atmosphere with a known vertical temperature profile. It is shown that absolute accuracies of about 0.5 km are possible. Qualitative and quantitative representations of atmospheric dynamics were shown by remapping, display, and stereo image analysis on an interactive computer/imaging system. Applications of stereo observations include: (1) cloud top height contours of severe thunderstorms and hurricanes, (2) cloud top and base height estimates for cloud-wind height assignment, (3) cloud growth measurements for severe thunderstorm over-shooting towers, (4) atmospheric temperature from stereo heights and infrared cloud top temperatures, and (5) cloud emissivity estimation. Recommendations are given for future improvements in stereo observations, including a third GOES satellite, operational scan synchronization of all GOES satellites and better resolution sensors.

Hasler, A. F.↗

Melt segregation from partially molten source regions - The importance of melt density and source region size

An investigation is conducted regarding the changes expected in the density contrast between basic melts and peridotites with increasing pressure using the limited data available on the compressibilities of silicate melts and data on the densities of mantle minerals. It is concluded that since compressibilities of silicate melts are about an order of magnitude greater than those of mantle minerals, the density contrast between basic melts and mantle minerals must diminish significantly with increasing pressure. An earlier analysis regarding the migration of liquid in partially molten source regions conducted by Walker et al. (1978) is extended, giving particular attention to the influence of the diminished density contrast between melt and residual crystals with increasing source region depth and to the influence of source region size. This analysis leads to several generalizations concerning the factors influencing the depths at which magmas will segregate from their source regions and the degrees of partial melting that can be achieved in these source regions before melt segregation occurs.

Stolper, E.↗

Importance of differential charging for controlling both natural and induced vehicle potentials on ATS-5 and ATS-6

Three techniques of discharging satellites used on the P78-2 satellite were the ejection of a beam of electrons from an electron gun; the emission of electrons from a heated, biased filament; and the ejection of a plasma containing energetic positive xenon ions and low energy electrons. When the P78-2 satellite ground to plasma potential difference reached several hundred volts, each of the three techniques was able to completely discharge the satellite. The comparative effctiveness of the techniques were clearly shown. Two days later, the satellite charged to -8 keV upon entering eclipse. The electron gun, emitting 1 mA of electrons with 150 eV energy, reduced the difference in potential between satellite ground and the ambient plasma to -1 kV, but could not completely discharge the satellite. The plasma source completely discharged the satellite.

Whipple, E. C.↗

The geophysical importance of bubbles in the sea

Present knowledge of the mechanisms for production and enrichment and film drops by bursting bubbles is summarized, with particular emphasis on the unsolved problems. Sea salt is by far the major constituent cycled through the Earth's atmosphere each year. Bursting bubbles in the oceans appear to be primarily responsible. These salt particles play a role in the formation of maritime clouds, which in turn affect the Earth's radiation budget. Along with the salt are carried various chemical pollutants and potentially pathogenic microorganisms, often in highly enriched form.

Cirpriano, R. J.↗

Ground level reflectance measurement techniques - An evaluation with emphasis on the importance of spectral calibration

The bandpasses, overflight conditions, and sensor geometry that will provide optimum target discrimination in remote-sensing studies can be determined only from spectral reflectance measurements made for various sun-target-sensor geometries, supplemented by model calculations which can be checked against field data. The accurate measurement of ground reflectance properties is critical to the design of future sensors and to the determination of imaging conditions. The current investigation has the objective to review typical methods of measuring spectral reflectance, to point out some of the problems inherent to reflectance measuring techniques, and to present a method of checking measurement accuracy.

Duggin, M. J.↗

Regional chemical setting of the Apollo 16 landing site and the importance of the Kant Plateau

Orbital X-ray data from the Apollo 16 region indicate that physiographic units identified before the lunar mission can be classified as chemical units as well. The Descartes Mountains, however, appear to be an extension of the Kant Plateau composition that is unusually anorthositic and resembles farside terra. The Cayley Plains have closer affinities to basaltic materials than terra materials, physically, spectrally and chemically. The Theophilus impact, 330 km east of the landing site, excavated magnesium-rich basalts from below less-magnesian flows in Mare Nectaris; but, mafic ejecta was substantially blocked from the Apollo 16 site by the Kant Plateau that rises 5 km above the level of the mare. Apollo 16 soil samples from stations selected to collect either Descartes Mountains material or Cayley Plains material were surprisingly similar. However, they do, indeed, show the chemical trends indicative of the two units as defined by the orbiting geochemistry detectors. The Kant Plateau and Descartes Mountains material may be among the rare nearside examples of a plagioclase-rich cumulate of the primordial magma ocean.

Andre, C. G.↗

Compensation mechanism in liquid encapsulated Czochralski GaAs Importance of melt stoichiometry

It is shown that the key to reproducible growth of undoped semi-insulating GaAs by the liquid encapsulated Czochralski (LEC) technique is the control over the melt stoichiometry. Twelve crystals were grown from stoichiometric and nonstoichiometric melts. The material was characterized by secondary ion mass spectrometry, localized vibrational mode far infrared spectroscopy, Hall-effect measurements, optical absorption, and photoluminescence. A quantitative model for the compensation mechanism in the semi-insulating material was developed based on these measurements. The free carrier concentration is controlled by the balance between EL2 deep donors and carbon acceptors; furthermore, the incorporation of EL2 is controlled by the melt stoichiometry, increasing as the As atom fraction in the melt increases. As a result, semi-insulating material can be grown only from melts above a critical As composition. The practical significance of these results is discussed in terms of achieving high yield and reproducibility in the crystal growth process.

Holmes, D. E.↗

Diurnal patterns of wheat spectral reflectances and their importance in the assessment of canopy parameters from remotely sensed observations

Spectral reflectances of Produra wheat were measured at 13 different times of the day at Phoenix, Arizona, during April 1979 using a nadir-oriented hand-held 4-band radiometer which had bandpass characteristics similar to those on LANDSAT satellites. Different Sun altitude and azimuth angles caused significant diurnal changes in radiant return in both visible and near-IR regions of the spectrum and in several vegetation indices derived from them. The magnitude of these changes were related to different canopy architecture, percent cover and green leaf area conditions. Spectral measurements taken at each time period were well correlated with green leaf area index but the nature of the relationship changed significantly with time of day. Thus, a significant bias in the estimation of the green leaf area index from remotely sensed spectral data could occur if sun angles are not properly accounted for.

Pinter, P. J.↗

Theoretical studies of photodissociation of small molecules of astrophysical importance

The radicals and ions observed in comets result from photodissociation and photoionization of molecules. According to current models, a comet is composed chiefly of a large, solid nucelus of frozen gases (parent molecules) such as H2O, HCN, and NH3. It is believed comets were formed at the same time and in the same region of space as the major planets and that their chemical composition is the same as that of the early solar system. As the comet nears the Sun, the surface heats up, liberating the frozen gases as well as dust particles. Solar radiation photodissociates the parent molecules into fragments that are observed by resonance fluorescence. Both polyatomic molecules, present in the interstellar medium, and cometary radicals were observed. Using laboratory photo-dissociation data and computer models, astronomers are attempting to identify the parent molecules that account for all observed radicals and ions.

Saxon, R. P.↗

Study to assess the importance of errors introduced by applying NOAA 6 and NOAA 7 AVHRR data as an estimator of vegetative vigor: Feasibility study of data normalization

The use of NOAA AVHRR data to map and monitor vegetation types and conditions in near real-time can be enhanced by using a portion of each GAC image that is larger than the central 25% now considered. Enlargement of the cloud free image data set can permit development of a series of algorithms for correcting imagery for ground reflectance and for atmospheric scattering anisotropy within certain accuracy limits. Empirical correction algorithms used to normalize digital radiance or VIN data must contain factors for growth stage and for instrument spectral response. While it is not possible to correct for random fluctuations in target radiance, it is possible to estimate the necessary radiance difference between targets in order to provide target discrimination and quantification within predetermined limits of accuracy. A major difficulty lies in the lack of documentation of preprocessing algorithms used on AVHRR digital data.

Duggin, M. J.↗

Visible and near-IR spectral reflectance of geologically important materials: A short review

Examples of reflectance spectra are presented and discussed for various mineral groups including pyroxenes, olivene, phylosilicates, amphiboles, feldspars, oxides and hydroxides, carbonates, and mixtures of minerals. The physical sources of some spectral features are also reviewed such as charge transfer and conduction bands, crystal field absorptions, and vibrational absorptions.

Singer, R. B.↗

Space structure vibration modes: How many exist? Which ones are important?

Several assertions are argued regarding mode analysis of structural vibration. The idea of a "mode' is, in essence, a mathematical one. It is highly unlikely that any real structure can vibrate exactly so that all its points move in unison; in other words, it is highly unlikely that any structure has any modes. As an approximation, however, the use of a mode is an excellent one for many structures, especially for the "lower modes'. The agreement between experiment and theory for the "higher modes' tends to become weaker. In this approximate sense, most structures have a very large number of modes. It is elementary to show, however, that no real structure has an infinite number of modes. The only utility of the "infinite modes' idea is within the purely mathematical domain. Many "error indices' can be defined as guidelines for structural modal order reduction. Simple modal truncation, although suggested by experience with slender rods, is naive. The proper process is mode selection, based on a appropriate error criterion.

Hughes, P. C.↗

Importance of the Lu-Hf isotopic system in studies of planetary chronology and chemical evolution

The Lu-176-Hf-176 isotope method and its applications in earth sciences are discussed with regard to planetary-evolution studies. From new data on basalts from oceanic islands, Hf-176/Hf-177 and Nd-143/Nd-144 are found to display a single linear isotopic variation in the suboceanic mantle, whereas considerable divergences occur in Hf-176/Hf-177-Sr-87/Sr-86 and Nd-143/Nd-144-Sr87/Sr-86 diagrams. With the acquisition of further Hf-Sr-Nd isotopic data, these discordant Sr-87/Sr-86 relationships may allow a distinction between processes such as mantle metasomatism, influence of sea-water altered material in the magma source, or recycling of sediments into the mantle. The best quality Hf isotope data are obtained from granitoid or zircons, and are most suitable for studying ancient terrestrial Hf isotopic variations. Lu-Hf is shown to be a viable method for dating ancient terrestrial and extraterrestrial samples, but is unlikely to find wide application in pure chronological studies because it offers little advantage over existing methods.

Patchett, P. J.↗

Importance of heterogeneous processes to tropospheric chemistry - Studies with a one-dimensional model

A one-dimensional, time-dependent model of tropospheric air composition is developed which incorporates several heterogeneous physical and chemical processes. The model includes the interaction of gases, aerosols, and hydrometeors through the physical mechanisms of nucleation, condensation, evaporation, coagulation, coalescence, and deliquescence. Precipitation, sedimentation, and dry deposition act to remove material from the atmosphere, while chemical transformations occur both in the vapor and the condensed phases. The model also incorporates the sources and vertical diffusion of gases and particles, as well as changes in the solar intensity caused by light-scattering from aerosols and clouds. Preliminary simulations made using this model indicate that rainout and washout processes strongly influence the distributions of tropospheric gases and aerosols under certain conditions.

Turco, R. P.↗