SEARCH · Engineering Papers

Results for “Finite Element Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Precision pointing compensation for DSN antennas with optical distance measuring sensors

The pointing control loops of Deep Space Network (DSN) antennas do not account for unmodeled deflections of the primary and secondary reflectors. As a result, structural distortions due to unpredictable environmental loads can result in uncompensated boresight shifts which degrade pointing accuracy. The design proposed here can provide real-time bias commands to the pointing control system to compensate for environmental effects on pointing performance. The bias commands can be computed in real time from optically measured deflections at a number of points on the primary and secondary reflectors. Computer simulations with a reduced-order finite-element model of a DSN antenna validate the concept and lead to a proposed design by which a ten-to-one reduction in pointing uncertainty can be achieved under nominal uncertainty conditions.

Scheid, R. E.↗

NASA NTRS1989

Near-field testing of the 15-meter hoop-column antenna

A 15-m-diameter antenna was tested to verify that dimensional tolerances for acceptable performance could be achieved and to verify structural, electromagnetic, and mechanical performance predictions. This antenna utilized the hoop column structure, a gold plated molybdenum mesh reflector, and 96 control cables to adjust the reflector conformance with a paraboloid. The dimensional conformance of the antenna structure and surface was measured with metric camera and theodolites. Near field pattern data were used to assess the electromagnetic performance at five frequencies from 2.225 to 11.6 GHz. The reflector surface was adjusted to greatly improve electromagnetic performance with a finite element model and the surface measurements. Measurement results show that antenna surface figure and adjustments and electromagnetic patterns agree well with predictions.

Schroeder, Lyle C.↗

NASA NTRS1987

Recent developments in the experimental identification of the dynamics of a highly flexible grid

Control effectiveness tests of reaction wheel actuators attached to a highly flexible grid are reported. Analytic determination of actuator control effectiveness is accomplished with finite-element modeling. Experimental determination is done with a least-square parameter identification algorithm that identifies the control coefficients of the second-order difference equation model of each vibration mode. The algorithm assumes a model with frequency and damping predetermined from free-decay tests for each mode. Accounting for the difference in forced and resonant frequency was necessary to produce control effectiveness estimates that are in reasonable agreement with the analytic predictions. The average error for control effectiveness coefficients greater than 5/sq sec was 6.384 percent.

Montgomery, Raymond C.↗

NASA NTRS1988

Efficient vibration mode analysis of aircraft with multiple external store configurations

A coupling method for efficient vibration mode analysis of aircraft with multiple external store configurations is presented. A set of low-frequency vibration modes, including rigid-body modes, represent the aircraft. Each external store is represented by its vibration modes with clamped boundary conditions, and by its rigid-body inertial properties. The aircraft modes are obtained from a finite-element model loaded by dummy rigid external stores with fictitious masses. The coupling procedure unloads the dummy stores and loads the actual stores instead. The analytical development is presented, the effects of the fictitious mass magnitudes are discussed, and a numerical example is given for a combat aircraft with external wing stores. Comparison with vibration modes obtained by a direct (full-size) eigensolution shows very accurate coupling results. Once the aircraft and stores data bases are constructed, the computer time for analyzing any external store configuration is two to three orders of magnitude less than that of a direct solution.

Karpel, M.↗

NASA NTRS1988

Piezoelectric polymer-based isolation mount for articulated pointing systems on large flexible spacecraft

When a pointing system is attached to a large flexible body that is subject to continuous excitation, a mechanical isolator becomes a key element in achieving high performance. An active softmount based on the piezoelectric polymer poly (vinylidene fluoride) is considered here for use in a precision pointing system for Space Station. A finite element model of the softmount is developed and added to simple Space Station and payload models for performance analysis. Both linear frequency domain and nonlinear time domain simulations are carried out in order to demonstrate the wideband disturbance rejection capabilities of the design. Nonlinear geometric effects of large nodal deflections are also considered.

Sirlin, Samuel W.↗

NASA NTRS1988

Power law rheology of ice and the relaxation style and retention of craters on Ganymede

A numerical finite element model of viscous relaxation of craters in ice is presented which incorporates rheological data for ice at temperatures and pressures appropriated to the near-surface regions of Ganymede. For temperature gradients in reasonable agreement with those obtained from thermal and structural models of Ganymede, relaxation times greater than 10 to the 7th years were obtained for craters with diameters less than 100 km. For all craters with diameters greater than 10 km, the dependence of viscosity on stress was found to significantly shorten the relaxation time. The rheological laws which dominate crater relaxation are discussed for craters of various sizes. The results are compared with imagery from Voyager.

Thomas, Paul J.↗

NASA NTRS1988

Investigation of difficult component effects on FEM vibration prediction for the AH-1G helicopter

Under the NASA-sponsored Design Analysis Methods for Vibrations program, a series of ground vibration tests and NASTRAN finite element model correlations were conducted on the Bell AH-1G helicopter gunship to investigate the effects of difficult components on the vibration response of the airframe. Secondary structure and damping were found to have significant effects on the frequency response of the airframe above 15 Hz. The nonlinear effects of thrust stiffening and elastomeric mounts on the low-frequency pylon modes below the main rotor were also significant.

Dompka, Robert V.↗

NASA NTRS1989

Meteoroid and orbital debris shielding on the Orbital Maneuvering Vehicle

NASA's Orbital Maneuvering Vehicle (OMV) is being designed to withstand a 10-year lifetime in polar and low earth orbits. A large percentage of OMV's lifetime will be spent operating in the vicinity of the Space Shuttle and Space Station or in storage at these manned locations. An extensive analysis has been performed to determine the effects of the meteoroid and orbital debris environments on OMV's external fuel tanks. A finite element model of OMV was constructed using NASTRAN and analyzed with the meteoroid and debris design analysis code BUMPER. The results show that the long design lifetime, and the ever increasing man-made orbital debris environment, will require the use of shielding over the external fuel tanks.

Kirkpatrick, Marc E.↗

NASA NTRS1989

The impact of an IVA robot on the Space Station microgravity environment

In order to maintain a microgravity environment during Space Station operations, it will be necessary to minimize reaction forces. These mechanical forces will typically occur during reboost, docking, equipment operation, intravehicular activities (IVA) robot operation, or crew activity. This paper focuses on those disturbances created by an IVA robot and its impact on the Space Station microgravity environment. The robot dynamic analysis that was used to generate the forcing function as the input into a finite element model of the U.S. Laboratory will be shown. Acceleration levels were determined through analysis and have shown that a robotic system can sustain reaction forces into the station below 0.0001 g. A comparison between IVA robot effects and crew motion effects on the low-g environment is also described. It is concluded that robot trajectory shaping and motor accelerations feedback can minimize reaction forces.

Harman, Phillip E.↗

NASA NTRS1989

Structural behavior of composites with progressive fracture

The objective of the study is to unify several computational tools developed for the prediction of progressive damage and fracture with efforts for the prediction of the overall response of damaged composite structures. In particular, a computational finite element model for the damaged structure is developed using a computer program as a byproduct of the analysis of progressive damage and fracture. Thus, a single computational investigation can predict progressive fracture and the resulting variation in structural properties of angleplied composites.

Minnetyan, L.↗

NASA NTRS1989

Eigensolution of finite element problems in a completely connected parallel architecture

A parallel algorithm is presented for the solution of the generalized eigenproblem in linear elastic finite element analysis. The algorithm is based on a completely connected parallel architecture in which each processor is allowed to communicate with all other processors. The algorithm is successfully implemented on a tightly coupled MIMD parallel processor. A finite element model is divided into m domains each of which is assumed to process n elements. Each domain is then assigned to a processor or to a logical processor (task) if the number of domains exceeds the number of physical processors. The effect of the number of domains, the number of degrees-of-freedom located along the global fronts, and the dimension of the subspace on the performance of the algorithm is investigated. For a 64-element rectangular plate, speed-ups of 1.86, 3.13, 3.18, and 3.61 are achieved on two, four, six, and eight processors, respectively.

Akl, F.↗

NASA NTRS1989

Mixed finite element formulation for frictionless contact problems

Simple mixed finite element models and a computational procedure are presented for the solution of frictionless contact problems. The analytical formulation is based on a form of Reissner's large-rotation theory of the structure with the effect of transverse shear deformation included. The contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the internal forces (or stress resultants), the generalized displacements, and the Lagrange multipliers associated with the contact conditions. Numerical examples of axisymmetric deformations of a hemispherical shell and planar deformations of a circular ring are presented. Both structures are pressed against a rigid plate. Detailed information about the response of the structures is presented. The numerical studies demonstrate the high accuracy of the mixed models and the effectiveness of the computational procedure based on combining the geometrically nonlinear terms and the contact conditions in one iteration loop.

Noor, Ahmed K.↗

NASA NTRS1989

Stress and free vibration analyses of multilayered composite plates

This paper presents a two-phase computational procedure for the accurate prediction of vibration frequencies, stresses, and deformations in simply supported bidirectional multilayered composite plates. The range of applicability of this procedure in terms of the plate's parameters is determined, and the potential of the proposed procedure for use in conjunction with large-scale finite element modeling of composite structures is discussed. It is shown that the use of the shear correction factors calculated by this procedure extends the range of the validity of the first-order shear deformation theory, used in the first phase of the procedure, to fairly thick multilayered plates with the h/L1 ratio of the order of 0.3.

Noor, Ahmed K.↗

NASA NTRS1989

A partitioning strategy for efficient nonlinear finite element dynamic analysis on multiprocessor computer

A computational procedure is presented for the nonlinear dynamic analysis of unsymmetric structures on vector multiprocessor systems. The procedure is based on a novel hierarchical partitioning strategy in which the response of the unsymmetric and antisymmetric response vectors (modes), each obtained by using only a fraction of the degrees of freedom of the original finite element model. The three key elements of the procedure which result in high degree of concurrency throughout the solution process are: (1) mixed (or primitive variable) formulation with independent shape functions for the different fields; (2) operator splitting or restructuring of the discrete equations at each time step to delineate the symmetric and antisymmetric vectors constituting the response; and (3) two level iterative process for generating the response of the structure. An assessment is made of the effectiveness of the procedure on the CRAY X-MP/4 computers.

Noor, Ahmed K.↗

NASA NTRS1989

Multibody instantly centered moving Lagrangian observer schemes. I - Formulation. II - Application to vehicular simulations

A finite element modeling method employing an instantly centered moving Lagrangian observer is proposed to solve multibody problems involving several rotating components, each with its own rotational history. The present technique allows the steady-state behavior of the problem simulation to be rendered stationary and time independent. In the second part, the method is extended to model the steady and transient response of ground-based automotive-type vehicular systems, including the modeling of vehicular obstruction rollover events.

Padovan, Joseph↗

NASA NTRS1989

Thermal mechanical analyses of large diameter ion accelerator systems

Thermal mechanical analyses of large diameter ion accelerator systems are performed using commercially available finite element software executed on a desktop computer. Finite element models of a 30-cm-diameter accelerator system formulated using plate/shell elements give calculated results which agree well with similar published obtained on a mainframe computer. Analyses of a 50-cm-diameter, three-grid accelerator system using measured grid temperatures (corresponding to discharge powers of 653 and 886 watts) indicate that thermally induced grid movements need not be the performance limiting phenomena for accelerator systems of this size.

Brophy, John R.↗

NASA NTRS1989

Strain measurements in a rotary engine housing

The development of structural design tools for Rotary Combustion Engines (RCE) using Finite Element Modeling (FEM) requires knowledge about the response of engine materials to various service conditions. This paper describes experimental work that studied housing deformation as a result of thermal, pressure and mechanical loads. The measurement of thermal loads, clamping pressure, and deformation was accomplished by use of high-temperature strain gauges, thermocouples, and a high speed data acquisition system. FEM models for heat transfer stress analysis of the rotor housing will be verified and refined based on these experimental results.

Lee, C. M.↗

NASA NTRS1990

Computation Of Flutter In Turbomachinery

"Direct" solution procedure supplants conventional eigenmode analysis. Iterative computational procedure yields critical mach number for onset of flutter and flutter angular frequency, of propfan, turbine with unshrouded blades, or other turbomachinery. Procedure applied to aeroelastic analysis of propfan, in which finite-element model of propfan structure combined with model of unsteady aerodynamics based on three-dimensional subsonic-lifting-surface theory. Particularly suitable for optimization in design because as optimal design evolves, flutter solution expected to change incrementally, so previous solution provides good estimates for start of current solution.

Murthy, Durbha V.↗