Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Mn- and N- doped carbon as promising catalysts for oxygen reduction reaction: Theoretical prediction and experimental validation

Development of platinum group metal (PGM)-free as well as iron-free electrocatalysts is imperative to achieve low-cost and long-term durability of polymer electrolyte membrane fuel cells. Here in this paper, we combined computational and experimental studies to investigate the mechanism, activity, and durability of Mn and N co-doped carbon (denoted as Mn-N-C) as promising catalysts for oxygen reduction reaction (ORR) in challenging acid medium. The first-principles density functional theory calculations predict that it is favorable for O 2 to be reduced into H 2 O via four-electron pathway on MnN 4 sites embedded in carbon layer. Using the reaction energies calculated from DFT, microkinetic analysis predicts that the MnN 4 sites could catalyze ORR with a half-wave potential only 60 mV lower than that of Pt (111) and 80 mV lower than that of the FeN 4 sites embedded in carbon layer, assuming the same density of active sites in the catalysts. Motivated by the computational prediction, we synthesized a Mn-N-C catalyst using a polymer (i.e., polyaniline-PANI) hydrogel precursors via a high temperature approach. Structural characterization indicates that atomically dispersed Mn sites coordinated with N are very likely formed in the catalyst. Electrochemical measurements show that the synthesized Mn-N-C catalyst can promote four-electron ORR with a catalytic activity in acids comparable to that of the Fe-N-C catalyst prepared using the same procedure. More importantly, the Mn-N-C catalyst exhibits superior potential cyclic stability, only losing 20 mV after 10000 cycles (0.6 to 1.0 V in O 2 saturated electrolyte). In comparison, the Fe-N-C catalyst would loss 80 mV after only 5000 cycles under the same testing conditions. Our computational and experimental results strongly suggest that the Mn and N co-doped carbon could be promising high-performance catalysts for ORR in acidic medium.

25 ENERGY STORAGE↗

Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard

In the United States, forty-eight (48) percent of the residential end-use energy consumption is spent on space heating and air conditioning. Reducing envelope-generated heating and cooling loads through application of phase change material (PCM)-enhanced building envelopes can facilitate maximizing the energy efficiency of buildings. Combined experimental testing and numerical modeling of PCM-enhanced envelope components are two important aspects of the evaluation of their energy benefits. An innovative phase change material (nano-PCM) was developed with PCM encapsulated with expanded graphite (interconnected) nanosheets, which is highly conductive for enhanced thermal storage and energy distribution, and is shape-stable for convenient incorporation into lightweight building components. A wall with cellulose cavity insulation and prototype PCM-enhanced interior wallboards was built and tested in a natural exposure test (NET) facility in a hot-humid climate location. The test wall contained PCM wallboards and regular gypsum wallboard, for a side-by-side annual comparison study. Further, numerical modeling of the walls containing the nano-PCM wallboard was performed to determine its actual impact on wall-generated heating and cooling loads. The model was first validated using experimental data, and then used for annual simulations using Typical Meteorological Year (TMY3) weather data. This article presents the measured performance and numerical analysis evaluating the energy-saving potential of the nano-PCM-enhanced wallboard.

finite element analysis↗

Numerical analysis of experimental studies of methane hydrate dissociation induced by depressurization in a sandy porous medium

Methane Hydrates (MHs) are a promising energy source abundantly available in nature. Understanding the complex processes of MH formation and dissociation is critical for the development of safe and efficient technologies for energy recovery. Many laboratory and numerical studies have investigated these processes using synthesized MH-bearing sediments. A near-universal issue encountered in these studies is the spatial heterogeneous hydrate distribution in the testing apparatus. In the absence of direct observations (e.g. using X-ray computed tomography) coupled with real time production data, the common assumption made in almost all numerical studies is a homogeneous distribution of the various phases. In an earlier study (Yin et al., 2018) that involved the numerical description of a set of experiments on MH-formation in sandy medium using the excess water method, we showed that spatially heterogeneous phase distribution is inevitable and significant. In the present study, we use as a starting point the results and observations at the end of the MH formation and seek to numerically reproduce the laboratory experiments of depressurization-induced dissociation of the spatially-heterogeneous MH distribution. This numerical study faithfully reproduces the geometry of the laboratory apparatus, the initial and boundary conditions of the system, and the parameters of the dissociation stimulus, capturing accurately all stages of the experimental process. Using inverse modelling (history-matching) that minimized deviations between the experimental observations and numerical predictions, we determined the values of all the important flow, thermal, and kinetic parameters that control the system behaviour, which yielded simulation results that were in excellent agreement with the measurements of key monitored variables, i.e. pressure, temperature, cumulative production of gas and water over time. We determined that at the onset of depressurization (when the pressure drop – the driving force of dissociation – is at its maximum), the rate of MH dissociation approaches that of an equilibrium reaction and is limited by the heat transfer from the system surroundings. Furthermore, as the effect of depressurization declines over time, the dissociation reaction becomes kinetically limited despite significant heat inflows from the boundaries, which lead to localized temperature increases in the reactor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Octane Gasoline from Biomass: Experimental, Economic, and Environmental Assessment

Five economically-advantaged biomass feedstocks identified in the United States Department of Energy's 2016 Billion Ton Study were gasified and the syngas was reformed at the bench scale to study the feedstock price-performance relationship. The distribution of reformed syngas compositions, heating values, and yields were similar across the different feedstocks and blends thereof, which ranged from inexpensive residual wastes to more expensive and higher quality biomass, revealing that feedstock performance was mostly insensitive to its price. Custom blended feedstocks produced syngas with characteristics resembling linear combinations of syngas from single-component feedstocks, supporting the ability to customize and predict blended properties based on single-feedstock data. The experimental gasification data informed a techno-economic analysis of specific feedstock costs for producing high-octane gasoline, and the results showed that miscanthus and forest residues were the most cost-effective. A field-to-wheels life-cycle assessment of greenhouse gas emissions showed that forest residues was the most environmentally benign feedstock of those studied. from inexpensive residual wastes to more expensive and higher quality biomass, revealing that feedstock performance was mostly insensitive to its price. Custom blended feedstocks produced syngas with characteristics resembling linear combinations of syngas from single-component feedstocks, supporting the ability to customize and predict blended properties based on single-feedstock data. The experimental gasification data informed a techno-economic analysis of specific feedstock costs for producing high-octane gasoline, and the results showed that miscanthus and forest residues were the most cost-effective. A field-to-wheels life-cycle assessment of greenhouse gas emissions showed that forest residues was the most environmentally benign feedstock of those studied.

09 BIOMASS FUELS↗

Experimental study and demonstration of pilot-scale oxy-coal combustion at elevated temperatures and pressures

High pressure oxy-fuel firing is a promising next-generation combustion technology for electricity generation, allowing net efficiency improvement compared to traditional oxy-fuel firing systems. Oxy-coal combustion has been extensively investigated at ambient pressure, but limited experimental data is available regarding this combustion method at elevated pressures at pilot or full scale. The study presented here investigates the operational performance of a high pressure, high temperature pilot-scale oxy-fuel combustor. Pulverized Utah bituminous coal in form of coal-water slurry was combusted at pressures up to 14 bar, temperatures up to 1600 °C and firing rates up to 300 kW. Eight different runs were selected for presentation and the measurements include flue gas composition (CO, CO 2 , CH 4 , SO 2 , O 2 ), carbon and sulfur content of fly ash, combustor temperature profile and flame radiation profile. The flame radiation measurements were carried out with a novel narrow beam radiometer which measures local radiant heat flux at a specific location in the combustor. The radiation ranged from 108 to 279 kW/m 2 depending mainly on combustor temperature. Additionally, the temperature significantly impacted the carbon content of fly ash: 2.66% was measured near 1600 °C, while the concentration increased to 36.7% when the temperature was decreased to 1300°C. Furthermore, the successful experimental demonstrations showed that increasing pressure is a viable combustion method and a step towards enhancing the efficiency in oxy-fuel firing based power plants.

01 COAL, LIGNITE, AND PEAT↗

Experimental investigation of a reverse osmosis desalination system directly powered by wave energy

Powering desalination processes with renewable energy is a promising solution to address the global issue of water shortage with minimum carbon footprint and environmental impact. Here, we experimentally investigate a sustainable reverse osmosis (RO) desalination system directly powered by wave energy. In this system, seawater is pressurized and pumped to a RO desalination module via a piston pump directly driven by an oscillating surge wave energy converter (OSWEC). An accumulator is adopted on the feed inlet to mitigate the pressure fluctuations under time-varying ocean conditions. Meanwhile, a needle valve on the brine outlet is used to adjust the system pressure and water recovery. A 1:10 scaled model was designed, fabricated, and tested in a wave tank based on the Froude scaling law. Further, the optimal specific water productivity (SWP) obtained in the tank tests with 3.5 g/L feed salinity was 2.23m 3 /kWh, indicating a full-scale specific water productivity of 0.22m 3 /kWh for 35g/L seawater salinity. The influence of needle valve tuning on the specific water productivity was experimentally investigated and analyzed. Under a specific operational condition, tuning this valve improved specific water productivity by about 17% and reduced the system pressure by 24%, thereby avoiding extreme pressure and improving the system’s capability. This pilot study demonstrates that ocean wave energy is a promising source to sustainably power reverse osmosis desalination and provide freshwater water for coastal regions.

16 TIDAL AND WAVE POWER↗

An experimental study of the behavior of a high efficiency residential heat pump in cooling mode with common installation faults imposed

Faults are believed to be common in split system air-conditioner and heat pump systems, due to operating degradation or installation problems. Common faults include improper refrigerant charge, reduced evaporator airflow, liquid line restrictions, and the presence of non-condensable gas. Laboratory tests were used to quantify fault impacts on performance of a heat pump system, and impacts on indicator variables such as refrigerant temperatures and pressures. This paper describes a large set of laboratory tests implemented on a high efficiency heat pump operating in cooling mode. This system uses R-410A refrigerant and has a rotary compressor, TXV, two accumulators, and a compensator. A small number of previous experimental studies have been done previously to study the effects of some operating faults, but none has examined a modern system with these components. The tests were conducted with a range of fault intensities and driving conditions. The results are compared to previous researchers’ experimental results. The system’s performance was found to be quite robust in the presence of faults. The TXV, accumulators, and compensator significantly reduce sensitivity to refrigerant charge and liquid line restriction faults, and other faults to a lesser extent.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Unveiling the mechanism of surface corrugation formation on a quasi free-standing bi-layer graphene via experimental and modeling investigations

Extensive studies have been conducted to accomplish the controls over the formation of surface corrugations on chemical vapor deposited (CVD) graphene. However, the underlying mechanism of the surface corrugation formation on graphene remains elusive, due to the difficulty delineating the growth-induced surface corrugations from wrinkles formed during graphene transfer with the use of a supporting layer casted on top of the sample. Here, in this study, “quasi free-standing” graphene was realized using the weakly-interacting h-BN layer during a wet transfer process to study the surface corrugation formation on graphene. The weak interaction of graphene with the supporting h-BN layer allows for the growth-induced surface corrugations to be released, enabling the investigation of the primary mechanism for the graphene corrugation behavior during the transfer process. The experimental measurements of surface corrugations were conducted using atomic force microscopy (AFM) to reveal that surface corrugations are formed following the graphene’s crystallographic directions. Density functional theory calculations using the projector augmented-wave (PAW) method and Perdew-Burke-Ernzerhof (PBE) exchange correlation functional were also conducted for two models of “atomic-scale ripples” and “nanoscale wrinkles” and showed that all of them are formed along the crystallographic axis of graphene, which is in good agreement with the experimental observations.

36 MATERIALS SCIENCE↗

Experimental study and discrete element method simulation of Geldart Group A particles in a small-scale fluidized bed

Geldart Group A particles are of great importance in various chemical processes because of advantages such as ease of fluidization, large surface area, and many other unique properties. It is very challenging to model the fluidization behavior of such particles as widely reported in the literature. In this study, a pseudo-2D experimental column with a width of 5 cm, a height of 45 cm, and a depth of 0.32 cm was developed for detailed measurements of fluidized bed hydrodynamics of fine particles to facilitate the validation of computational fluid dynamic (CFD) modeling. The hydrodynamics of sieved FCC particles (Sauter mean diameter of 148 µm and density of 1300 kg/m3) and NETL-32D sorbents (Sauter mean diameter of 100 µm and density of 480 kg/m3) were investigated mainly through the visualization by a high-speed camera. Numerical simulations were then conducted by using NETL’s open source code MFIX-DEM. Both qualitative and quantitative information including bed expansion, bubble characteristics, and solid movement were compared between the numerical simulations and the experimental measurement. Furthermore, the cohesive van der Waals force was incorporated in the MFIX-DEM simulations and its influences on the flow hydrodynamics were studied.

42 ENGINEERING↗

In vitro and in vivo studies on antitumor effects of gossypol on human stomach adenocarcinoma (AGS) cell line and MNNG induced experimental gastric cancer

Highlights: {yields} Gossypol is a well known polyphenolic compound used for anticancer studies but we are the first to report that gossypol has antitumor effect on MNNG induced gastric cancer in experimental animal models. {yields} Our study shows that gossypol inhibits the proliferation of AGS (human gastric adenocarcinoma) cell line. {yields} In animal models, gossypol extends the survival of cancer bearing animals and also protects the cells from carcinogenic effect. {yields} So we suggest that gossypol would be a potential chemotherapeutic and chemopreventive agent for gastric cancer. -- Abstract: The present study has evaluated the chemopreventive effects of gossypol on N-methyl-N'-nitro-N-nitrosoguanidine (MNNG)-induced gastric carcinogenesis and on human gastric adenocarcinoma (AGS) cell line. Gossypol, C{sub 30}H{sub 30}O{sub 8}, is a polyphenolic compound that has anti proliferative effect and induces apoptosis in various cancer cells. The aim of this work was to delineate in vivo and in vitro anti-initiating mechanisms of orally administered gossypol in target (stomach) tissues and in human gastric adenocarcinoma (AGS) cell line. In vitro results prove that gossypol has potent cytotoxic effect and inhibit the proliferation of adenocarcinoma (AGS) cell line. In vivo results prove gossypol to be successful in prolonging the survival of MNNG induced cancer bearing animals and in delaying the onset of tumor in animals administrated with gossypol and MNNG simultaneously. Examination of the target (stomach) tissues in sacrificed experimental animals shows that administration of gossypol significantly reduces the level of tumor marker enzyme (carcino embryonic antigen) and pepsin. The level of Nucleic acid contents (DNA and RNA) significantly reduces, and the membrane damage of glycoprotein subsides, in the target tissues of cancer bearing animals, with the administration of gossypol. These data suggest that gossypol may create a beneficial effect in patients with gastric cancer.

60 APPLIED LIFE SCIENCES↗

Pancreatic acinar cells-derived cyclophilin A promotes pancreatic damage by activating NF-κB pathway in experimental pancreatitis

Highlights: • CypA is upregulated in experimental pancreatitis. • CCK induces expression and release of CypA in acinar cell in vitro. • rCypA aggravates CCK-induced acinar cell death and inflammatory cytokine production. • rCypA activates the NF-κB pathway in acinar cells in vitro. - Abstract: Inflammation triggered by necrotic acinar cells contributes to the pathophysiology of acute pancreatitis (AP), but its precise mechanism remains unclear. Recent studies have shown that Cyclophilin A (CypA) released from necrotic cells is involved in the pathogenesis of several inflammatory diseases. We therefore investigated the role of CypA in experimental AP induced by administration of sodium taurocholate (STC). CypA was markedly upregulated and widely expressed in disrupted acinar cells, infiltrated inflammatory cells, and tubular complexes. In vitro, it was released from damaged acinar cells by cholecystokinin (CCK) induction. rCypA (recombinant CypA) aggravated CCK-induced acinar cell necrosis, promoted nuclear factor (NF)-κB p65 activation, and increased cytokine production. In conclusion, CypA promotes pancreatic damage by upregulating expression of inflammatory cytokines of acinar cells via the NF-κB pathway.

60 APPLIED LIFE SCIENCES↗

Ghrelin ameliorates intestinal barrier dysfunction in experimental colitis by inhibiting the activation of nuclear factor-kappa B

Aim: This study aimed to investigate the effect and underlying mechanism of ghrelin on intestinal barrier dysfunction in dextran sulfate sodium (DSS)-induced colitis. Methods and results: Acute colitis was induced in C57BL/6J mice by administering 2.5% DSS. Saline or 25, 125, 250 μg/kg ghrelin was administrated intraperitoneally (IP) to mice 1 day before colitis induction and on days 4, 5, and 6 after DSS administration. IP injection of a ghrelin receptor antagonist, [D-lys{sup 3}]-GHRP-6, was performed immediately prior to ghrelin injection. Ghrelin (125 or 250 μg/kg) could reduce the disease activity index, histological score, and myeloperoxidase activities in experimental colitis, and also prevented shortening of the colon. Ghrelin could prevent the reduction of transepithelial electrical resistance and tight junction expression, and bolstered tight junction structural integrity and regulated cytokine secretion. Ultimately, ghrelin inhibited nuclear factor kappa B (NF-κB), inhibitory κB-α, myosin light chain kinase, and phosphorylated myosin light chain 2 activation. Conclusions: Ghrelin prevented the breakdown of intestinal barrier function in DSS-induced colitis. The protective effects of ghrelin on intestinal barrier function were mediated by its receptor GHSR-1a. The inhibition of NF-κB activation might be part of the mechanism underlying the effects of ghrelin that protect against barrier dysfunction. - Highlights: • Ghrelin ameliorates intestinal barrier dysfunction in experimental colitis. • The effect of ghrelin is mediated by GHSR-1a. • Inhibition of NF-κB activation.

60 APPLIED LIFE SCIENCES↗

Salvianolic acid B inhibits myofibroblast transdifferentiation in experimental pulmonary fibrosis via the up-regulation of Nrf2

Highlights: • SalB inhibits TGF-β1-induced myofibroblast transdifferentiation in MRC-5 cells. • SalB ameliorates bleomycin-induced pulmonary fibrosis in rats. • SalB attenuates oxidative stress during experimental pulmonary fibrogenesis. • Nrf2 protein is absent in IPF fibroblasts and fibroblastic foci lesions. • SalB up-regulates the expression of Nrf2 in fibrotic fibroblasts in vitro and vivo. Salvianolic acid B (SalB) is one of the most bioactive components extracted from Salvia miltiorrhiza, and its antioxidant capacity corresponds with its protective effects against cell injury from oxidative stress. The aim of the present study was to evaluate the effect of SalB on experimental pulmonary fibrosis and its ability to ameliorate the oxidative/antioxidative imbalance during fibrosis pathogenesis. The anti-fibrotic activity of SalB was first confirmed in Transforming growth factor β1(TGF-β1)-stimulated MRC-5 cells. The protection of SalB against oxidative stress during fibrogenesis in vitro was verified by detecting ROS production, the levels of glutathione (GSH) and malondialdehyde (MDA). The Western blot and PCR results indicated that SalB could up-regulate nuclear factor erythroid-derived 2-like 2 (Nrf2) at both the protein and mRNA levels and induce Nrf2 nuclear translocation in vitro, which may be the mechanism underlying the anti-fibrotic capacity of SalB. Furthermore, the anti-fibrotic and antioxidant capacities of SalB in vivo were confirmed in rats with BLM-induced pulmonary fibrosis. The immunohistochemistry results showed that Nrf2 was absent in fibroblastic foci (FF) areas, while the SalB treatment could increase the expression of Nrf2 in lung tissues, especially in FF areas.

60 APPLIED LIFE SCIENCES↗

Butylphthalide ameliorates experimental autoimmune encephalomyelitis by suppressing PGAM5-induced necroptosis and inflammation in microglia

Highlights: • The Dl-3-n-butylphthalide ameliorates the disease severity of multiple sclerosis. • Necroptosis and inflammation play important roles in the function of NBP on EAE. • PGAM5 functions as a key mediator for the protective role of NBP on the progression of EAE. Multiple sclerosis (MS) is a long-lasting autoimmune disease of the central nervous system. Currently, the etiology of MS is not known. Experimental autoimmune encephalomyelitis (EAE), has been recognized as the most widely used animal models to study the molecular mechanisms underlying MS and the efficacy of potential drugs for treatment of MS. In the present study, we found that Dl-3-n-butylphthalide (NBP), a neuroprotective drug in ischemic brain injury, prevented development of disease in experimental autoimmune encephalomyelitis (EAE) and significantly reduced inflammatory factors and necroptosis-associated genes, including PGAM5 in the spinal cord tissues. Similarly, silence of PGAM5 in spinal cord also ameliorated the disease severity in the mice with EAE. Moreover, re-expression of PGAM5 counteracted the protective effect of NBP on the pathogenesis of EAE. Importantly, we found that both NBP and silence of PGAM5 inhibited cellular necroptosis and inflammation in microglia induced by TNFα plus zVAD-fmk. Meanwhile, overexpression of PGAM5 reactivated cellular necroptosis and inflammation suppressed by NBP in vitro. Taken together, our findings provide evidence that NBP can attenuate the progression of EAE by suppressing PGAM5-induced necroptosis and inflammation in microglia and represents a new therapeutic strategy for treating autoimmune diseases.

60 APPLIED LIFE SCIENCES↗

Experimental and computational studies of melting of the spinel phase in the Fe–Al–O ternary system

The melting behavior of spinel in the Fe–Al–O system at high temperatures (1500–1800 °C) was studied by a combination of experimental and computational investigations. Differential thermal analysis (DTA) at ultra-high temperatures coupled with cooling traces on CO 2 laser-heated levitated samples provided melting temperatures and the heats of fusion of (Fe,Al) 3 O 4 spinel phases. The experimental results are in fair agreement with the predictions using a published CALPHAD description and areas for modeling improvement are identified. New insights into the melting of defect spinel are provided.

36 MATERIALS SCIENCE↗

Experimental evidence for ‘buckle, ruck and tuck’ in neutron irradiated graphite

The current mainstream theory for radiation-induced dimensional change of nuclear graphite is based on the notion that interstitially displaced carbon atoms will coalesce into dislocation loops (i.e., additional basal planes). This standard atomic-displacement model has been challenged by theories based on first principles calculations. Furthermore, the so-called ‘ruck and tuck’ of basal planes has been proposed as an alternative mechanism to explain the observed c-axis expansion under irradiation; however, no such defects have been observed experimentally so far. In this study, the first experimental evidence for the presence of a ‘ruck and tuck’ defect in high-temperature neutron-irradiated nuclear graphite is introduced.

36 MATERIALS SCIENCE↗

Experimental data based combinatorial kinetic simulations for predictions of synergistic catalyst mixtures

Physical mixtures of catalysts can sometimes show synergistic activity which exceeds the sum of the activities of the same amount of catalysts employed separately. However, identifying such synergistic mixtures is non-trivial. Not all mixtures display synergy, and the number of combinations that are possible (even for binary mixtures of equal portions) scales very rapidly, and thus they would be costly to screen experimentally. In this work, we show that it is possible to predict synergistic mixtures using combinatorial kinetic simulations based on experimental data collected on individual catalysts. The data was first collected for conditions-of-interest under low conversions (also called near differential conditions, such that each condition approximates a small volume in a non-differential conditions reactor) to build a library of kinetic models (one model for each catalyst). This data was then used for combinatorial kinetic simulations of non-differential reactor scale conversions, and successfully predicted the qualitative behavior of two synergistic physical mixtures. The capability was utilized in the present work in the context of converting CO, C 3 H 6 , and NO species in simulated car exhaust, but is a general approach. We provide equations to estimate the costs of the screening method as well as the combinatorial kinetics method and show that the costs of identifying synergistic physical mixtures become much lower with the combinatorial kinetics method even before ten catalysts of interest. The cost of using prediction by the combinatorial kinetics method continue to become lower (relative to screening) when more catalysts are added -- and even more so if mixtures beyond two components, or consideration of multiple catalyst ratios, is of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and Computational Studies of the Production of 1,3-Butadiene from 2,3-Butanediol Using SiO2-Supported H3PO4 Derivatives

Silica-supported phosphoric acid and metal phosphate catalyzed 1,3-butadiene (BDE) production from 2,3-butanediol (2,3-BDO) was studied using experimental and computational techniques. The catalyst was initially tested in a continuous flow reactor using commercially available 2,3-BDO, leading to maximum BDE yields of 63C%. Quantum chemical mechanistic studies revealed 1,2-epoxybutane is a kinetically viable and thermodynamically stable intermediate, supported by experimental demonstration that this epoxide can be converted to BDE under standard reaction conditions. Newly proposed E2 and SN2' elementary steps were studied to rationalize the formation of BDE and all detected side-products. Additionally, using quantum mechanics/molecular mechanics (QM/MM) calculations, we modeled silica-supported phosphate catalysts to study the effect of the alkali metal center. Natural population analysis showed that phosphate oxygen atoms are more negatively charged in CsH2PO4/SiO2 than in H3PO4/SiO2. In combination with temperature-programmed desorption experiments using CO2, the results of this study suggest that the improved selectivity achieved when adding the metal center is related to an increase in the basicity of the catalyst.

butadiene↗