Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EPITAXY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Magnetization dynamics in La{sub 0.67}Ca{sub 0.33}MnO{sub 3} epitaxial films probed with resonant and non-resonant microwave absorption

Temperature (T) dependent microwave absorption measurements are performed on La{sub 0.67}Ca{sub 0.33}MnO{sub 3} (LCMO) epitaxial thin films of thickness 100 and 200 nm in an electron paramagnetic resonance spectrometer operating in X-band. The resonant absorption peak is monitored for out-of-plane (H{sup ⊥}) and in-plane (H{sup ∥}) dc magnetic field (H) as the system goes through magnetic ordering. These data suggest a resilient transformation to the ferromagnetic (FM) phase in the vicinity of the Curie temperature (T{sub C}), indicative of a phase separation, which is dominant in the thinner film. The saturation magnetization is calculated from SQUID magnetometry on the same film. A pronounced zero-field absorption is seen in H{sup ∥} geometry displaying anomalous growth in 100 nm film at T < T{sub C}. This feature is correlated with the magneto-conductivity of the manganite which is colossal in the vicinity of T{sub C} in the well-ordered film of thickness 200 nm. Signature of standing spin wave modes is seen in H{sup ⊥} measurements which are analyzed to calculate the spin wave stiffness constant D(T) in the limit of zero temperature. The same is also inferred from the decay of equilibrium magnetization in the framework of Bloch law. These studies reveal that a bulk like LCMO is obtained in the fully relaxed thicker films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly resistive epitaxial Mg-doped GdN thin films

We report the growth by molecular beam epitaxy of highly resistive GdN, using intentional doping with magnesium. Mg-doped GdN layers with resistivities of 10{sup 3} Ω cm and carrier concentrations of 10{sup 16 }cm{sup −3} are obtained for films with Mg concentrations up to 5 × 10{sup 19} atoms/cm{sup 3}. X-ray diffraction rocking curves indicate that Mg-doped GdN films have crystalline quality very similar to undoped GdN films, showing that the Mg doping did not affect the structural properties of the films. A decrease of the Curie temperature with decreasing the electron density is observed, supporting a recently suggested magnetic polaron scenario [F. Natali, B. J. Ruck, H. J. Trodahl, D. L. Binh, S. Vézian, B. Damilano, Y. Cordier, F. Semond, and C. Meyer, Phys. Rev. B 87, 035202 (2013)].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman measurements of substrate temperature in a molecular beam epitaxy growth chamber

A method is described for directly measuring the temperature of a substrate in a molecular-beam epitaxy (MBE) growth system. The approach relies on the establishment of the temperature dependence of Raman-active phonons of the substrate material using independently known calibration points across the range of interest. An unknown temperature in this range is then determined based on the Raman peak position with the substrate in situ the MBE chamber. The apparatus relies on conventional optics and Raman components. Shifting and broadening of the Raman spectrum are described based on the effects of thermal expansion and anharmonic decay. The choice of reference temperature is discussed. The method is qualified by examining the substrate temperature dependence, relative to that of a standard thermocouple, during a commonly used ramp procedure. Both temperature difference and time lag are obtained.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrical performance of phase change memory cells with Ge{sub 3}Sb{sub 2}Te{sub 6} deposited by molecular beam epitaxy

Here, we report on the electrical characterization of phase change memory cells containing a Ge{sub 3}Sb{sub 2}Te{sub 6} (GST) alloy grown in its crystalline form by Molecular Beam Epitaxy (MBE). It is found that the high temperature growth on the amorphous substrate results in a polycrystalline film exhibiting a rough surface with a grain size of approximately 80–150 nm. A detailed electrical characterization has been performed, including I-V characteristic curves, programming curves, set operation performance, crystallization activation at low temperature, and resistance drift, in order to determine the material related parameters. The results indicate very good alignment of the electrical parameters with the current state-of-the-art GST, deposited by physical vapor deposition. Such alignment enables a possible employment of the MBE deposition technique for chalcogenide materials in the phase change memory technology, thus leading to future studies of as-deposited crystalline chalcogenides as integrated in electrical vehicles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of epitaxial strain on elastocaloric effect in ferroelectric thin films

We report the influence of epitaxial strain u{sub m} on the elastocaloric properties of BaTiO{sub 3} thin films. Using thermodynamic calculations, we show that there exists a critical compressive stress σ{sub 3c} at which the elastocaloric effect is maximized for any compressive misfit strain we investigate. Moreover, it is found that |σ{sub 3c}| decreases significantly with decreasing |u{sub m}|, which is accompanied by a reduction of the elastocaloric response. Interestingly, a several fold enhancement in the electrocaloric effect can be achieved for stress in proximity of σ{sub 3c}. The elastocaloric effect predicted here may find potential cooling applications by combining the stress-mediated electrocaloric effect or designing hybrid elastocaloric/electrocaloric devices in the future.

36 MATERIALS SCIENCE↗

Interfacial structure in epitaxial perovskite oxides on (001) Ge crystal

We investigated the interfacial structure of hetero-epitaxial SrZr{sub 0.68}Ti{sub 0.32}O{sub 3} thin film deposited on (001) Ge single crystal via transmission electron microscopy (TEM). The results from high-resolution scanning TEM and electron energy-loss spectroscopy show an atomically abrupt interface without secondary phase. We found misfit dislocations with Burgers vector of 1/2a 〈111〉 and threading dislocations with Burgers vector of a 〈100〉. Furthermore, we observed the coupling between dislocation half-loop and anti-phase boundary induced by the lattice terrace of Ge along 〈100〉 direction and their decoupling after annealing. We proposed models based on half-loop theory to interpret the coupling and the dislocation reactions.

36 MATERIALS SCIENCE↗

Hole traps associated with high-concentration residual carriers in p-type GaAsN grown by chemical beam epitaxy

The hole traps associated with high background doping in p-type GaAsN grown by chemical beam epitaxy are studied based on the changes of carrier concentration, junction capacitance, and hole traps properties due to the annealing. The carrier concentration was increased dramatically with annealing time, based on capacitance–voltage (C–V) measurement. In addition, the temperature dependence of the junction capacitance (C–T) was increased rapidly two times. Such behavior is explained by the thermal ionization of two acceptor states. These acceptors are the main cause of high background doping in the film, since the estimated carrier concentration from C–T results explains the measured carrier concentration at room temperature using C–V method. The acceptor states became shallower after annealing, and hence their structures are thermally unstable. Deep level transient spectroscopy (DLTS) showed that the HC2 hole trap was composed of two signals, labeled HC21 and HC22. These defects correspond to the acceptor levels, as their energy levels obtained from DLTS are similar to those deduced from C–T. The capture cross sections of HC21 and HC22 are larger than those of single acceptors. In addition, their energy levels and capture cross sections change in the same way due to the annealing. This tendency suggests that HC21 and HC22 signals originate from the same defect which acts as a double acceptor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Urbach absorption edge in epitaxial erbium-doped silicon

We investigate the dependencies of the photocurrent in Si:Er p-n junctions on the energy of the incident photons. The exponential absorption edge (Urbach edge) just below fundamental edge of silicon was observed in the absorption spectra of epitaxial Si:Er layers grown at 400–600 C. It is shown that the introduction of erbium significantly enhances the structural disorder in the silicon crystal which was estimated from the slope of the Urbach edge. We discuss the possible nature of the structural disorder in Si:Er and a new mechanism of erbium excitation, which does not require the presence of deep levels in the band gap of silicon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The electronic structure of homogeneous ferromagnetic (Ga, Mn)N epitaxial films

X-ray Absorption Fine Structure (XAFS) techniques, namely, X-ray Near Edge Structure (XANES), Extended XAFS (EXAFS), and Anomalous X-ray Diffraction (AXRD) were used to investigate the local atomic and electronic structure of (Ga, Mn)N magnetic layers with Mn concentrations of up to 10% grown by Molecular Beam Epitaxy. The XANES and AXRD analysis prove the Mn incorporation on substitutional GaN lattice sites. EXAFS results indicate the good quality of the structure under examination, although 0.5 nitride atom vacancies were found. The Wien2k code was applied to interpret the XANES spectra quantitatively, i.e., to determine the electronic structure of the Mn atoms. It was shown that accounting for the core-hole effect is necessary to reconstruct effectively the XANES spectra. Conducted charge density analysis based on DFT calculations identified the valency of Mn atom to be of 2.4+.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Sn surface segregation during GeSn epitaxial growth by Auger electron spectroscopy and energy dispersive x-ray spectroscopy

The mechanism of Sn surface segregation during the epitaxial growth of GeSn on Si (001) substrates was investigated by Auger electron spectroscopy and energy dispersive X-ray spectroscopy. Sn surface segregation depends on the growth temperature and Sn content of GeSn layers. During Sn surface segregation, Sn-rich nanoparticles form and move on the surface during the deposition, which results in a rough surface owing to facet formation. The Sn-rich nanoparticles moving on the surface during the deposition absorb Sn from the periphery and yield a lower Sn content, not on the surface but within the layer, because the Sn surface segregation and the GeSn deposition occur simultaneously. Sn surface segregation can occur at a lower temperature during the deposition compared with that during postannealing. This suggests that the Sn surface segregation during the deposition is strongly promoted by the migration of deposited Ge and Sn adatoms on the surface originating from the thermal effect of substrate temperature, which also suggests that limiting the migration of deposited Ge and Sn adatoms can reduce the Sn surface segregation and improve the crystallinity of GeSn layers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure at transition metal phthalocyanine-transition metal oxide interfaces: Cobalt phthalocyanine on epitaxial MnO films

The electronic structure of the interface between cobalt phthalocyanine (CoPc) and epitaxially grown manganese oxide (MnO) thin films is studied by means of photoemission (PES) and X-ray absorption spectroscopy (XAS). Our results reveal a flat-lying adsorption geometry of the molecules on the oxide surface which allows a maximal interaction between the π-system and the substrate. A charge transfer from MnO, in particular, to the central metal atom of CoPc is observed by both PES and XAS. The change of the shape of N-K XAS spectra at the interface points, however, to the involvement of the Pc macrocycle in the charge transfer process. As a consequence of the charge transfer, energetic shifts of MnO related core levels were observed, which are discussed in terms of a Fermi level shift in the semiconducting MnO films due to interface charge redistribution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of growth temperature and device structure on GaP solar cells grown by molecular beam epitaxy

Gallium phosphide (GaP) is an attractive candidate for wide-bandgap solar cell applications, possessing the largest bandgap of the III-arsenide/phosphides without aluminum. However, GaP cells to date have exhibited poor internal quantum efficiency (IQE), even for photons absorbed by direct transitions, motivating improvements in material quality and device structure. In this work, we investigated GaP solar cells grown by molecular beam epitaxy over a range of substrate temperatures, employing a much thinner emitter than in prior work. Higher growth temperatures yielded the best solar cell characteristics, indicative of increased diffusion lengths. Furthermore, the inclusion of an AlGaP window layer improved both open-circuit voltage and short wavelength IQE.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Markedly distinct growth characteristics of semipolar (112{sup ¯}2) and (1{sup ¯}1{sup ¯}22{sup ¯}) InGaN epitaxial layers

We compare metalorganic vapor phase epitaxy of InGaN/GaN heterostructures on semipolar (112{sup ¯}2) and (1{sup ¯}1{sup ¯}22{sup ¯}) GaN bulk substrates. In incorporation efficiency is higher for (112{sup ¯}2) InGaN, which enables higher temperature growth of InGaN and is beneficial for quality improvement. InGaN/GaN quantum wells (QWs) on (112{sup ¯}2) show abrupt interfaces, but those on (1{sup ¯}1{sup ¯}22{sup ¯}) tend to form three-dimensional nanofacets. Differences in growth temperature and structures of the (112{sup ¯}2) and (1{sup ¯}1{sup ¯}22{sup ¯}) QWs cause higher internal quantum efficiencies of the (112{sup ¯}2) [(1{sup ¯}1{sup ¯}22{sup ¯})] QWs at shorter (longer) wavelengths.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magneto-transport anisotropy in epitaxially grown hybrid MnAs/GaAs multilayer

Using molecular-beam epitaxy, we grew a MnAs/GaAs multilayer on a GaAs(100) substrate and compared its magneto-transport characteristics to those of a single-layer MnAs thin film. The crystal orientation of the MnAs layers in both samples was type-B. M–H measurements revealed two-fold symmetric magnetic anisotropy on the surface with the easy and hard direction of magnetization. When the current flowed along the hard direction, the MnAs/GaAs multilayer exhibited negative magnetoresistance below Curie temperature; when the current flowed along the easy direction, it turned positive. We suggest that this peculiar anisotropic magneto-transport behavior in the multilayer originated from two-dimensional carrier confinement and spin-orbit coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial Fe{sub 3}Pt/FePt nanocomposites on MgO and SrTiO{sub 3}

We have exploited the pseudomorphic growth of the magnetically soft Fe{sub 3}Pt phase on top of L1{sub 0}-FePt to obtain fully epitaxial soft/hard nanocomposites on both MgO(100) and SrTiO{sub 3}(100). The magnetic properties of this new nanocomposite system, driven by the soft/hard exchange-coupling, can be tailored by varying soft phase thickness, soft phase magnetic anisotropy and substrate. Coercivity is strongly reduced by the addition of the soft phase, a reduction which is definitely affected by the nominal composition of the soft phase and by the substrate choice; similarly is the magnetic phase diagram of the composite system. Coercive field decreases down to 21% of the hard layer value for Fe{sub 3}Pt(5 nm)/FePt(3.55 nm) nanocomposites on SrTiO{sub 3}; this maximum coercivity reduction was obtained with a nominal atomic content of Fe in the soft phase of 80%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of phase separation induced supercooling on magnetotransport properties of epitaxial La{sub 5/8−y}Pr{sub y}Ca{sub 3/8}MnO{sub 3} (y≈0.4) thin film

Thin films of La{sub 5/8−y}Pr{sub y}Ca{sub 3/8}MnO{sub 3} (y≈0.4) have been grown on single crystal SrTiO{sub 3} (001) by RF sputtering. The structural and surface characterizations confirm the epitaxial nature of these film. However, the difference between the ω-scan of the (002) and (110) peaks and the presence of pits/holes in the step-terrace type surface morphology suggests high density of defect in these films. Pronounced hysteresis between the field cooled cooling (FCC) and field cooled warming (FCW) magnetization measurements suggest towards the non-ergodic magnetic state. The origin of this nonergodicity could be traced to the magnetic liquid like state arising from the delicacy of the coexisting magnetic phases, viz., ferromagnetic and antiferromagnetic-charge ordered (FM/AFM-CO). The large difference between the insulator metal transitions during cooling and warming cycles (T{sub IM}{sup C} ∼ 64 K and T{sub IM}{sup W} ∼ 123 K) could be regarded as a manifestation of the nonergodicity leading to supercooling of the magnetic liquid while cooling. The nonergodicity and supercooling are weakened by the AFM-FM phase transition induced by an external magnetic field. T{sub IM} and small polaron activation energy corresponding the magnetic liquid state (cooling cycle) vary nonlinearly with the applied magnetic field but become linear in the crystalline solid state (warming cycle). The analysis of the low temperature resistivity data shows that electron-phonon interaction is drastically reduced by the applied magnetic field. The resistivity minimum in the lower temperature region of the self-field warming curve has been explained in terms of the Kondo like scattering in the magnetically inhomogeneous regime.

36 MATERIALS SCIENCE↗

Plasma assisted molecular beam epitaxy growth and effect of varying buffer thickness on the formation of ultra-thin In{sub 0.17}Al{sub 0.83}N/GaN heterostructure on Si(111)

This work reports on the detailed plasma-assisted molecular beam epitaxy (PAMBE) growth of ultra-thin In{sub 0.17}Al{sub 0.83}N/GaN heterostructures on Si(111) substrate with three different buffer thickness (600 nm, 400 nm, and 200 nm). Growth through critical optimization of growth conditions is followed by the investigation of impact of varying buffer thickness on the formation of ultra-thin 1.5 nm, In{sub 0.17}Al{sub 0.83}N–1.25 nm, GaN–1.5 nm, In{sub 0.17}Al{sub 0.83}N heterostructure, in terms of threading dislocation (TD) density. Analysis reveals a drastic reduction of TD density from the order 10{sup 10 }cm{sup −2} to 10{sup 8 }cm{sup −2} with increasing buffer thickness resulting smooth ultra-thin active region for thick buffer structure. Increasing strain with decreasing buffer thickness is studied through reciprocal space mapping analysis. Surface morphology through atomic force microscopy analysis also supports our study by observing an increase of pits and root mean square value (0.89 nm, 1.2 nm, and 1.45 nm) with decreasing buffer thickness which are resulted due to the internal strain and TDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of amorphous and epitaxial Si-rich silicide films composed of W-atom-encapsulated Si clusters

We investigated the electrical properties and derived the energy band structures of amorphous Si-rich W silicide (a-WSi{sub n}) films and approximately 1-nm-thick crystalline WSi{sub n} epitaxial films (e-WSi{sub n}) on Si (100) substrates with composition n = 8–10, both composed of Si{sub n} clusters each of which encapsulates a W atom (WSi{sub n} clusters). The effect of annealing in the temperature range of 300–500 °C was also investigated. The Hall measurements at room temperature revealed that a-WSi{sub n} is a nearly intrinsic semiconductor, whereas e-WSi{sub n} is an n-type semiconductor with electron mobility of ∼8 cm{sup 2}/V s and high sheet electron density of ∼7 × 10{sup 12 }cm{sup −2}. According to the temperature dependence of the electrical properties, a-WSi{sub n} has a mobility gap of ∼0.1 eV and mid gap states in the region of 10{sup 19 }cm{sup −3} eV{sup −1} in an optical gap of ∼0.6 eV with considerable band tail states; e-WSi{sub n} has a donor level of ∼0.1 eV with sheet density in the region of 10{sup 12 }cm{sup −2} in a band gap of ∼0.3 eV. These semiconducting band structures are primarily attributed to the open band-gap properties of the constituting WSi{sub n} cluster. In a-WSi{sub n}, the random network of the clusters generates the band tail states, and the formation of Si dangling bonds results in the generation of mid gap states; in e-WSi{sub n}, the original cluster structure is highly distorted to accommodate the Si lattice, resulting in the formation of intrinsic defects responsible for the donor level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗