Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRONIC MODULE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Design and Status of the Mu2e Crystal Calorimeter

The Mu2e experiment at Fermilab searches for the charged-lepton flavour violating (CLFV) conversion of a negative muon into an electron in the field of an aluminum nucleus, with a distinctive signature of a mono-energetic electron of energy slightly below the muon rest mass (104.967 MeV). The Mu2e goal is to improve by four orders of magnitude the search sensitivity with respect to the previous experiments. Any observation of a CLFV signal will be a clear indication of new physics. The Mu2e detector is composed of a tracker, an electro- magnetic calorimeter and an external veto for cosmic rays surrounding the solenoid. The calorimeter plays an important role in providing particle identification capabilities, a fast online trigger filter, a seed for track reconstruction while working in vacuum, in the presence of 1 T axial magnetic field and in an harsh radiation environment. The calorimeter requirements are to provide a large acceptance for 100 MeV electrons and reach at these energies: (a) a time resolution better than 0.5 ns; (b) an energy resolution < 10% and (c) a position resolution of 1 cm. The calorimeter design consists of two disks, each one made of 674 undoped CsI crystals read by two large area arrays of UV-extended SiPMs. We report here the construction and test of the Module-0 prototype. The Module-0 has been exposed to an electron beam in the energy range around 100 MeV at the Beam Test Facility in Frascati. Preliminary results of timing and energy resolution at normal incidence are shown. A discussion of the technical aspects of the calorimeter engineering is also reported in this paper.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Power Electronic Substrates for Space Restricted Application

High-power modules use substrates to house the semiconductor device and for electrical insulation. These substrates are constructed with thermally conductive dielectric material sandwiched between two metals to extract heat from semiconductor chips. Thus, the required cooling performance of a power module is linked to the substrate’s thermal performance and can vary based on the substrate technologies. In this study, four substrate technologies were evaluated for space-restricted applications: direct-bonded copper, an insulated metal substrate, a thermally annealed pyrolytic graphite–based insulated metal substrate, and direct-bonded aluminum, where the heat sink is directly attached without thermal interface materials. The finite element results suggest that the popular direct-bonded copper substrate has better thermal performance than the rest of the substrates for space-restricted applications. Furthermore, a modified direct-bonded copper is proposed to further improve thermal performance. The evaluation results show that the modified substrate can handle 30% more losses than its traditional counterpart.

Chowdhury, Shajjad↗

Effectiveness of Versalink 143 on Improving Shock Survival of Encapsulated Electronics

In the past, test-vehicle-mounted instrumentation modules that record sensor data during shock and vibration events have been coated with a polymer isolation layer to enhance survivability. This study uses finite element modeling to evaluate the effectiveness of the isolation material Versalink 143 on reducing stress in an instrumentation module. The modeling shows that while the isolation layer does attenuate stress due to high frequency shock and vibration, it also amplifies stress due to lower frequency shock and vibration. Thicker layers tend to attenuate high frequency stress more and amplify low frequency stress less. In addition, at higher test temperatures thermal expansion of the isolation layer can cause static stress in the module far greater than the stress due to shock, depending on how the module is constrained within the test vehicle. When designing and implementing vehicle- mounted instrumentation modules, the expected input shock spectrum, mounting constraints, and static effects of temperature must be carefully considered.

42 ENGINEERING↗

Diagnosis of ULF Wave-Particle Interactions With Megaelectron Volt Electrons: The Importance of Ultrahigh-Resolution Energy Channels

Electron flux measurements are an important diagnostic for interactions between ultralow-frequency (ULF) waves and relativistic (~1 MeV) electrons. Since measurements are collected by particle detectors with finite energy channel width, they are affected by a phase mixing process that can obscure these interactions. In this paper, we demonstrate that ultrahigh-resolution electron measurements from the Magnetic Electron Ion Spectrometer on the Van Allen Probes mission—obtained using a data product that improves the energy resolution by roughly an order of magnitude—are crucial for understanding ULF wave-particle interactions. In particular, the ultrahigh-resolution measurements reveal a range of complex dynamics that cannot be resolved by standard measurements. Furthermore, the standard measurements provide estimates for the ULF flux modulation amplitude, period, and phase that may not be representative of true flux modulations, potentially leading to ambiguous conclusions concerning electron dynamics.

42 ENGINEERING↗

Prognostics of damage accural in SSL luminaires and drivers subjected to HTSL accelerated aging

This paper will show an investigation of off-the-shelf luminaires with the focus on the LED electronic drivers, specifically the aluminum electrolytic capacitors (AECs), that have been aged using high temperature shelf life (HTSL) testing of 135°C in order to prognosticate the remaining useful life of the luminaires. Luminaires have the potential of seeing excessive temperatures when being transported across country or being stored in non-climate controlled warehouses. They are also being used in outdoor applications in desert environments that see little or no humidity but will experience extremely high temperatures during the day. This makes it important to increase our understanding of what effects being stored at high temperatures for a prolonged period of time will have on the usability and survivability of these devices. The U.S. Department of Energy has made a long term commitment to advance the efficiency, understanding and development of solid-state lighting (SSL) and is making a strong push for the acceptance and use of SSL products. In this work, the four AECs of three different types inside each LED electronic driver were studied. The change in capacitance and the change in equivalent series resistance (ESR) of the AECs were measured and considered to be a leading indication of failure of the LED system. These indicators were used to make remaining useful life predictions to develop an algorithm to predict the end of life of the AECs. The luminous flux of a pristine downlight module was also monitored using each LED electronic driver that was subjected to HTSL through the progression of the testing to determine a correlation between the light output of the lamp and the failing components of the LED electronic driver. Prognostic and Health Management (PHM) is a useful tool for assessment of the remaining life of electrical components and is demonstrated for AECs in this work.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Electric field geometries dominate quantum transport coupling in silicon nanoring

Investigations on the relation between the geometries of silicon nanodevices and the quantum phenomenon they exhibit, such as the Aharonov–Bohm (AB) effect and the Coulomb blockade, were conducted. An arsenic doped silicon nanoring coupled with a nanowire by electron beam lithography was fabricated. At 1.47 K, Coulomb blockade oscillations were observed under modulation from the top gate voltage, and a periodic AB oscillation of ΔB = 0.178 T was estimated for a ring radius of 86 nm under a high sweeping magnetic field. Modulating the flat top gate and the pointed side gate was performed to cluster and separate the many electron quantum dots, which demonstrated that quantum confinement and interference effects coexisted in the doped silicon nanoring.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Earth-scattering induced modulation in low-threshold dark matter experiments

Dark matter particles with sufficiently large interactions with ordinary matter can scatter in the Earth before reaching and scattering in a detector. This induces a modulation in the signal rate with a period of one sidereal day. We calculate this modulation for sub-GeV dark matter particles that interact either with a heavy or an ultralight dark-photon mediator and investigate the resulting signal in low-threshold detectors consisting of silicon, xenon, or argon targets. The scattering in the Earth is dominated by dark matter scatters off nuclei, while the signal in the detector is easiest to observe from dark matter scattering off electrons. We investigate the properties of the modulation signal and provide projections of the sensitivity of future experiments. We find that a search for a modulation signal can probe new regions of parameter space near the energy thresholds of current experiments, where the data are typically dominated by backgrounds.

Models for Dark Matter↗

Quiet-time electron increases, a measure of conditions in the outer solar system

One possible explanation for quiet-time electron increases, increases in the intensity of 3-12 MeV interplanetary electrons that have been reported by McDonald, Cline and Simnett, is discussed. It is argued that the electrons in quiet-time increases are galactic in origin, but that the observed increases are not the result of any variation in the modulation of these particles in the inner solar system. It is suggested instead that quiet-time increases may occur when more electrons than normal penetrate a modulating region that lies far beyond the orbit of earth. The number of electrons penetrating this region may increase when field lines that have experienced an unusually large random walk in the photosphere are carried by the solar wind out to the region. As evidence for this increased random walk, it is shown that five solar rotations before most of the quiet-time increases there is an extended period when the amplitude of the diurnal anisotropy, as is measured by the Deep River neutron monitor, is relatively low. Five rotations delay time implies that the proposed modulating region lies at approximately 30 AU from the Sun, assuming that the average solar wind speed is constant over this distance at approximately 400 km/sec.

Fisk, L. A.↗

A Novel Experimental Setup for Rare Events Selection and Its Potential Application to Super-heavy Elements Search

The paper presents a novel instrumentation for rare events selection which was tested in our research of short lived super heavy elements production and detection. The instrumentation includes an active catcher multi elements system and dedicated electronics. The active catcher located in the forward hemisphere is composed of 63 scintillator detection modules. Reaction products of damped collisions between heavy ion projectiles and heavy target nuclei are implanted in the fast plastic scintillators of the active catcher modules. The acquisition system trigger delivered by logical branch of the electronics allows to record the reaction products which decay via the alpha particle emissions or spontaneous fission which take place between beam bursts. One microsecond wave form signal from FADCs contains information on heavy implanted nucleus as well as its decays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The energy spectrum of 0.16 to 2 MeV electrons during solar quiet times

New observations of the quiet-time energy spectrum of 0.16- to 2-MeV electrons have been made with the Caltech Electron/Isotope Spectrometer which was launched on IMP-7 in September 1972. Earlier measurements of quiet-time electrons in this energy range by other groups have resulted in spectra differing by more than an order of magnitude in intensity. A minimum quiet-time flux level somewhat lower than the lowest previously reported spectra and consistent with an extrapolation of the spectrum measured at higher energies is found. A galactic secondary source of knock-on electrons is consistent with these results and with independent studies of the interstellar spectra of cosmic-ray nuclei, provided that solar modulation does not suppress the 0.16- to 2-MeV electron flux by more than a factor of about 3. Although not required, other recently suggested sources may also contribute to the observed fluxes.

Hurford, G. J.↗

Physical processes in an electron current layer causing intense plasma heating and formation of x-lines

We study the evolution of an electron current layer (ECL) through its several stages by means of three-dimensional particle-in-cell (PIC) simulations with ion to electron mass ratio M/m{sub e} = 400. An ECL evolves through the following stages: (i) Electrostatic (ES) current-driven instability (CDI) soon after its formation with half width w about 2 electron skin depth (d{sub e}), (ii) current disruption in the central part of the ECL by trapping of electrons and generation of anomalous resistivity, (iii) electron tearing instability (ETI) with significantly large growth rates in the lower end of the whistler frequency range, (iv) widening of the ECL and modulation of its width by the ETI, (v) gradual heating of electrons by the CDI-driven ES ion modes create the condition that the electrons become hotter than the ions, (vi) despite the reduced electron drift associated with the current disruption by the CDI, the enhanced electron temperature continues to favor a slow growth of the ion waves reaching nonlinear amplitudes, (vii) the nonlinear ion waves undergo modulation and collapse into localized density cavities containing spiky electric fields like in double layers (DLs), (viii) such spiky electric fields are very effective in further rapid heating of both electrons and ions. As predicted by the electron magnetohydrodynamic (EMHD) theories, the ETI growth rate maximizes at wave numbers in the range 0.4 < k{sub x}W < 0.8 where k{sub x} is the wave number parallel to the ECL magnetic field and w is the evolving half width of the ECL. The developing ETI generates in-plane currents that support out-of-plane magnetic fields around the emerging x-lines. The ETI and the spiky electrostatic structures are accompanied by fluctuations in the magnetic fields near and above the lower-hybrid (ion plasma) frequency, including the whistler frequency range. We compare our results with experimental results and satellite observation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quiet-time electron increases - A measure of conditions in the outer solar system.

Discussion of a possible explanation for the increases in the intensity range of 3- to 12-MeV interplanetary electrons that McDonald et al. (1972) have labeled as 'quiet-time electron increases.' It is argued that the electrons in quiet-time increases are galactic in origin but that the observed increases are not the result of any variation in the modulation of these particles in the inner solar system. It is suggested instead that quiet-time increases may occur when more electrons than normal penetrate a modulating region that lies far beyond the orbit of the earth. The number of electrons penetrating this region may increase when field lines that have experienced an unusually large random walk in the photosphere are carried by the solar wind out to the region. As evidence of this increased random walk, it is shown that five solar rotations before most of the quiet-time increases occur there is an extended period when the amplitude of the diurnal anisotropy (measured by the Deep River neutron monitor) is relatively low. A delay time of five rotations implies that the proposed modulating region lies at about 30 AU from the sun if the average solar-wind speed is assumed to be constant at about 400 km/sec over this distance. The implications for the correlation between periods of low-amplitude diurnal anisotropy and quiet-time increases on interplanetary conditions out to about 30 AU and some possible models for the proposed modulating region are also considered.

Fisk, L. A.↗

Ionic Modulation at the LaAlO 3 /KTaO 3 Interface for Extreme High-Mobility Two-Dimensional Electron Gas

Due to the coexistence of many emergent phenomena, including 2D superconductivity and a large Rashba spin-orbit coupling, 5d transition metal oxides-based two-dimensional electron systems (2DESs) have been prospected as one of the potential intrants for modern electronics. However, despite the lighter electron mass, the mobility of carriers, a key requisite for high-performance devices, in 5d-oxides devices remains far behind their 3d-oxides analogs. The carriers’ mobility in these oxides is significantly hampered by the inevitable presence of defects. Here, in this study, very high mobility (≈22 650 cm 2 V –1 s –1 ) of 5d-2DES confined at the LaAlO 3 /KTaO 3 interface is reported. The high mobility, which is beyond the values observed in SrTiO 3 2DESs in the same carrier-density range, is achieved using the ionic-liquid gating at room temperature. The authors postulate that the ionic-liquid gating affects the oxygen vacancies and efficiently reduces any disorder at the interface. Investigating density and mobility in a broad range of back-gate voltage, the authors reveal that the mobility follows the power-law µ ∝ n 1.2 , indicating the very high quality of ionic-liquid-gated LaAlO 3 /KTaO 3 devices, consistent with the postulate. Furthermore, the analysis of the quantum oscillations confirms that the high-mobility electrons occupy the electronic sub-bands emerging from the Ta:5d orbitals of KTaO 3 .

36 MATERIALS SCIENCE↗

The height of electron content changes in the ionosphere from ATS 6 beacon data

A technique is described which uses relative changes in Faraday rotation and modulation phase of satellite radio signals to determine the median height of the enhancement (or depletion) in the electron density of the ionosphere. During the post sunrise formation of the F layer the incremental layers have a median height of around 210 km (+ or - 40) and in the afternoon the decremental median is above the peak at 340 km (+ or - 40) on a winter day. A winter nighttime enhancement just after midnight appears as a thick layer extending upwards from the peak, with a median height at about 730 km. The method applies to large scale irregularities but not to small, dense, scintillation-causing irregularities for which Faraday and modulation phases do not represent the total electron content.

Davies, K.↗

Effect of the band structure of InGaN/GaN quantum well on the surface plasmon enhanced light-emitting diodes

The spontaneous emission (SE) of InGaN/GaN quantum well (QW) structure with silver(Ag) coated on the n-GaN layer has been investigated by using six-by-six K-P method taking into account the electron-hole band structures, the photon density of states of surface plasmon polariton (SPP), and the evanescent fields of SPP. The SE into SPP mode can be remarkably enhanced due to the increase of electron-hole pairs near the Ag by modulating the InGaN/GaN QW structure or increasing the carrier injection. However, the ratio between the total SE rates into SPP mode and free space will approach to saturation or slightly decrease for the optimized structures with various distances between Ag film and QW layer at a high injection carrier density. Furthermore, the Ga-face QW structure has a higher SE rate than the N-face QW structure due to the overlap region of electron-hole pairs nearer to the Ag film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Subterahertz self-oscillations of depletion of electron populations in the conduction band of GaAs in the presence of pumping and intrinsic stimulated radiation

It was previously found that, during picosecond optical pumping, ultrafast interrelated self-modulations of fundamental absorption of light and intrinsic stimulated picosecond radiation emerge in GaAs. In this study, quantitative evaluations confirming the assumption that the mentioned self-modulations are caused by self-oscillations of depletion of electron populations in the conduction band are made. The relation for the frequency of self-oscillations of depletion of populations is obtained. The presence of conditions for self-organization leading to the emergence of periodic nonlinear waves in nonequilibrium media, which is photogenerated electron-hole plasma with depletions of populations, is shown. As a result, in a series of studies, including this one, it is found that the collective excitation of charge carriers-self-oscillations of depletion of populations of the conduction band-emerges during pumping in GaAs under the effect of intrinsic stimulated radiation.

36 MATERIALS SCIENCE↗

High Performance Power Module for Hall Effect Thrusters

Previous efforts to develop power electronics for Hall thruster systems have targeted the 1 to 5 kW power range and an output voltage of approximately 300 V. New Hall thrusters are being developed for higher power, higher specific impulse, and multi-mode operation. These thrusters require up to 50 kW of power and a discharge voltage in excess of 600 V. Modular power supplies can process more power with higher efficiency at the expense of complexity. A 1 kW discharge power module was designed, built and integrated with a Hall thruster. The breadboard module has a power conversion efficiency in excess of 96 percent and weighs only 0.765 kg. This module will be used to develop a kW, multi-kW, and high voltage power processors.

Pinero, Luis R.↗

N -Arylimide Molecular Balances: A Comprehensive Platform for Studying Aromatic Interactions in Solution

Noncovalent interactions of aromatic surfaces play a key role in many biological processes and in determining the properties and utility of synthetic materials, sensors, and catalysts. However, the study of aromatic interactions has been challenging because these interactions are usually very weak and their trends are modulated by many factors such as structural, electronic, steric, and solvent effects. Recently, N-arylimide molecular balances have emerged as highly versatile and effective platforms for studying aromatic interactions in solution. These molecular balances can accurately measure weak noncovalent interactions in solution via their influence on the folded–unfolded conformational equilibrium. The structure (i.e., size, shape, π-conjugation, and substitution) and nature (i.e., element, charge, and polarity) of the π-surfaces and interacting groups can be readily varied, enabling the study of a wide range of aromatic interactions. These include aromatic stacking, heterocyclic aromatic stacking, and alkyl–π, chalcogen–π, silver–π, halogen–π, substituent–π, and solvent–π interactions. The ability to measure a diverse array of aromatic interactions within a single model system provides a unique perspective and insights as the interaction energies, stability trends, and solvent effects for different types of interactions can be directly compared. Some broad conclusions that have emerged from this comprehensive analysis include: (1) The strongest aromatic interactions involve groups with positive charges such as pyridinium and metal ions which interact with the electrostatically negative π-face of the aromatic surface via cation–π or metal–π interactions. Attractive electrostatic interactions can also form between aromatic surfaces and groups with partial positive charges. (2) Electrostatic interactions involving aromatic surfaces can be switched from repulsive to attractive using electron-withdrawing substituents or heterocycles. These electrostatic trends appear to span many types of aromatic interactions involving a polar group interacting with a π-surface such as halogen–π, chalcogen–π, and carbonyl–π. (3) Nonpolar groups form weak but measurable stabilizing interactions with aromatic surfaces in organic solvents due to favorable dispersion and/or solvophobic effects. Furthermore, a good predictor of the interaction strength is provided by the change in solvent-accessible surface area. (4) Solvent effects modulate the aromatic interactions in the forms of solvophobic effects and competitive solvation, which can be modeled using solvent cohesion density and specific solvent–solute interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗