Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Direct”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Direct probe of the nuclear modes limiting charge mobility in molecular semiconductors

Recent theories suggest that low frequency dynamic intramolecular and intermolecular motions in organic semiconductors (OSCs) are critical to determining the hole mobility. So far, however, it has not been possible to probe these motions directly experimentally and therefore no unequivocal and quantitative link exists between molecular-scale thermal disorder and macroscale hole mobility in OSCs. Here we use inelastic neutron scattering to probe thermal disorder directly by measuring the phonon spectrum in six different small molecule OSCs, which we accurately reproduce with first principles simulations. We use the simulated phonons to generate a set of electron–phonon coupling parameters. Using these parameters, the theoretical mobility is in excellent agreement with macroscopic measurements. Comparison of mobility between different materials reveals routes to improve mobility by engineering phonon and electron–phonon coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Novel aqueous amine looping approach for the direct capture, conversion and storage of CO 2 to produce magnesium carbonate

Designing novel integrated chemical pathways for the capture, conversion, and storage of CO 2 is a crucial need for advancing sustainable energy conversion. The accelerated conversion of CO 2 to water-insoluble and stable magnesium carbonate is a thermodynamically downhill route for permanently storing CO 2 . However, a practical constraint of carbon mineralization is the slow kinetics at low CO 2 concentrations. In this study, we investigate a direct integrated mineralization approach, whereby CO 2 , amine solvents (such as monoethanolamine, MEA), water and alkaline Mg-bearing solids are reacted in a slurry reaction environment. About 70% conversion of magnesium oxide to magnesium carbonate was achieved at 50 °C after 3 hours. The looping of amine-bearing solvents between the CO 2 loaded and release states, facilitates the accelerated conversion of magnesium-bearing oxides to magnesium carbonate. Hydrated magnesium carbonate and magnesium hydroxide phases were noted when less than complete conversion of magnesium oxide was achieved. The morphological features were determined using in operando ultra-small and small angle X-ray scattering (USAXS/SAXS) and grazing incidence-small angle X-ray scattering (GI-SAXS) measurements. The proposed pathway is an adaptive, low temperature, single-step approach for the direct capture, conversion and storage of CO 2 . By demonstrating the effectiveness of aqueous alkaline amine looping approach for the accelerated carbon mineralization of MgO, we aim to expand this approach to include heterogeneous alkaline industrial residues such as coal fly ash and steel slag and naturally occurring minerals such as magnesium silicate and calcium silicate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Direct time-resolved detection and quantification of key reactive intermediates in diethyl ether oxidation at T = 450–600 K

High-pressure multiplexed photoionization mass spectrometry (MPIMS) with tunable vacuum ultraviolet (VUV) ionization radiation from the Lawrence Berkeley Labs Advanced Light Source is used to investigate the oxidation of diethyl ether (DEE). Kinetics and photoionization (PI) spectra are simultaneously measured for the species formed. Several stable products from DEE oxidation are identified and quantified using reference PI cross-sections. In addition, we directly detect and quantify three key chemical intermediates: peroxy (ROO˙), hydroperoxyalkyl peroxy (˙OOQOOH), and ketohydroperoxide (HOOP[double bond, length as m-dash]O, KHP). These intermediates undergo dissociative ionization (DI) into smaller fragments, making their identification by mass spectrometry challenging. Furthermore, with the aid of quantum chemical calculations, we identify the DI channels of these key chemical species and quantify their time-resolved concentrations from the overall carbon atom balance at T = 450 K and P = 7500 torr. This allows the determination of the absolute PI cross-sections of ROO˙, ˙OOQOOH, and KHP into each DI channel directly from experiment. The PI cross-sections in turn enable the quantification of ROO˙, ˙OOQOOH, and KHP from DEE oxidation over a range of experimental conditions that reveal the effects of pressure, O 2 concentration, and temperature on the competition among radical decomposition and second O 2 addition pathways.

42 ENGINEERING↗
DOE OSTI2021

Directing the far-from-equilibrium assembly of nanoparticles in confined liquid crystals by hydrodynamic fields

The assembly of nematic colloids relies on long-range elastic interactions that can be manipulated through external stimuli. Confinement and the presence of a hydrodynamic field alter the defect structures and the energetic interactions between the particles. Here, the assembly landscape of nanoparticles embedded in a nematic liquid crystal confined in a nanochannel under a pressure-driven flow is determined. The dynamics of the liquid crystal tensor alignment field is determined through a Poisson-Bracket framework, namely the Stark–Lubensky equations, coupled with the zero-Reynolds momentum equations and the liquid crystal Landau-de Gennes free energy functional. A second order semi-implicit time integration and a three-dimensional Galerkin finite element method are used to resolve flow and nematic fields under several conditions. In general, the zero Reynolds flow displaces the defects around the particles in the upstream direction and renders the surface anchoring ineffective when the flow strength dominates over the nematic elasticity. More importantly, the potential of mean force for particle assembly is non-monotonic independent of surface anchoring. Our results show that the confinement length scale determines the repulsion/attraction transition between colloids, while the flow strength modifies the static defect structure surrounding the particles and determines the magnitude of the energetic barrier for successful assembly. In the attractive regime, the particles move at different rates through the nematic until one particle eventually catches up with the other. This process occurs against or along the direction of flow depending on the flow strength. Ultimately, these results provide a template for engineering and controlling the transport and assembly of nanoparticles under far-from equilibrium conditions in anisotropic media.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The high-yield direct synthesis of dimethyl ether from CO 2 and H 2 in a dry reaction environment

Direct dimethyl ether (DME) synthesis from CO 2 and H 2 is considered a promising production route. However, this process is thermodynamically and kinetically restricted by the presence of water as a byproduct. In this study, a water-conduction membrane was incorporated into the direct DME synthesis reactor to generate a dry reaction environment. In the absence of water, the activities of the CO 2 hydrogenation catalyst (CZA) and methanol dehydration catalyst (HZSM-5) were boosted 4- and 10-fold, respectively, and single-pass CO 2 conversion of up to 73.4%, far beyond equilibrium, and DME yields of up to 54.5% were obtained. Moreover, the good protection of the catalysts against fast deactivation was demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Imidazole-graphyne: a new 2D carbon nitride with a direct bandgap and strong IR refraction

Six-membered rings are common building blocks of many carbon structures. Recent studies have shown that penta-graphene composed of five-membered carbon rings have properties very different from that of graphene. This has motivated the search for new carbon structures. Among this is cp-graphyne, composed of carbon pentagons and bridged by acetylenic linkers. However, the bandgap of cp-graphyne, like that of graphene, is zero, making it unsuitable for applications in electronics. Herein, we show that a new two-dimensional (2D) carbon nitride structure formed by assembling the five-membered imidazole molecules with acetylenic linker can overcome this limitation. Named ID-GY, this new material not only has a direct band gap of 1.10 eV, but it is dynamically and mechanically stable and can withstand temperatures up to 1200 K. In addition, due to its porous and anisotropic geometry, the Young's modulus of ID-GY along the diagonal direction is lower than that of most 2D materials reported previously. Equally important, ID-GY exhibits strong refraction near infrared (IR) and has potential for applications in nanoelectronics and optical devices. These results, based on density functional theory, can stimulate experimental studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Boundary layer description of directional polymer crystallisation

Nearly fifty years ago Lovinger and Gryte suggested that the directional crystallization of a polymer was analogous to the quiescent isothermal crystallization experiment but at a supercooling where the crystal growth velocity was equal to the velocity of the moving front. Our experiments showed that this equivalence holds in a detailed manner at low directional velocities. To understand the underlying physics of these situations, we modeled the motion of a crystallization front in a liquid where the left side boundary is suddenly lowered below the melting point (Stefan's problem) but with the modification that the crystallization kinetics follow a version of the Avrami model. Our numerical results surprisingly showed that the results of the polymer analog track with the Stefan results which were derived for a simple liquid that crystallizes completely at its melting point; in particular, the position of the crystal growth-front evolved with time exactly as in the Stefan problem. The numerical solution also showed that the temperature in the immediate vicinity of the growth-front decreased with increasing front velocity, which is in line with Lovinger and Gryte's ansatz. To provide a clear theoretical understanding of these numerical results we derive a boundary layer solution to the governing coupled differential equations of the polymer problem. The analytical results are in agreement with our observations from experiments and numerical computations but show that this equivalence between the small molecule and polymer analog only holds in the limit where the crystallization enthalpy is much larger than the rate at which heat is conducted away in the polymer. In particular, in the context of the temperature profile, the enthalpy generated by the crystallisation process which is spread out over a narrow spatial region can be approximated as a point source whose location and temperature correspond to the Lovinger–Gryte ansatz.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Highly efficient synthesis of zeolite chabazite using cooperative hydration-mismatched inorganic structure-directing agents

Chabazite (CHA type) zeolite is notoriously difficult to synthesize in the absence of organic structure-directing agents owing to long synthesis times and/or impurity formation. The ability to tailor organic-free syntheses of zeolites is additionally challenging due to the lack of molecular level understanding of zeolite nucleation and growth pathways, particularly the role of inorganic cations. In this study, we reveal that zeolite CHA can be synthesized using six different combinations of inorganic cations, including the first reported seed- and organic-free synthesis without the presence of potassium. We show that lithium, when present in small quantities, is an effective accelerant of CHA crystallization; and that ion pairings can markedly reduce synthesis times and temperatures, while expanding the design space of zeolite CHA formation in comparison to conventional methods utilizing potassium as the sole structure-directing agent. Herein, we posit the effects of cation pairings on zeolite CHA crystallization are related to their hydrated ionic radii. We also emphasize the broader implications for considering the solvated structure and cooperative role of inorganic cations in zeolite synthesis within the context of the reported findings for chabazite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-performance Ruddlesden–Popper perovskite oxide with in situ exsolved nanoparticles for direct CO 2 electrolysis

Carbon dioxide (CO 2 ) is one of the principal greenhouse gases accountable for global warming and extreme climate changes. Electrochemically converting CO 2 into carbon monoxide (CO) is a promising approach for CO 2 utilization in achieving industrial decarbonization. High-temperature CO 2 electrolysis via solid oxide electrolysis cells (SOECs) has great potential, including high-energy efficiency, fast electrode kinetics, and competitive cost; however, this technology still has challenges associated with developing highly active, robust CO 2 electrodes for SOECs. We report novel Ruddlesden–Popper structured Pr 1.2 Sr 0.8 Mn 0.4 Fe 0.6 O 4–δ (RP-PSMF) with in situ exsolved Fe nanoparticles as the CO 2 electrode in SOECs for direct CO 2 conversion to CO. The mechanism of CO 2 electrolysis is studied by using the distribution of relaxation times method from electrochemical impedance spectroscopy. La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3–δ (LSGM)-electrolyte supported SOECs with the RP-PSMF cathode have achieved exceptionally high current densities of 2.90, 1.61, 0.91, and 0.48 A·cm –2 at an applied voltage of 1.5 V at 800, 750, 700, and 650 °C, respectively. Moreover, SOECs with the RP-PSMF cathode have exhibited a stable electrolysis performance for 100 h under a current cycling operation. Here, these results suggest that RP-PSMF with exsolved Fe nanoparticles is a highly promising cathode for high-temperature direct CO 2 electrolysis cells.

03 NATURAL GAS↗
DOE OSTI2024

Acid–base concentration swing for direct air capture of carbon dioxide

This work demonstrates the first experimental evidence of the acid–base concentration swing (ABCS) for direct air capture of CO 2 . This process is based on the effect that concentrating particular acid–base chemical reactants will strongly acidify solution, through Le Chatelier's principle, and result in outgassing absorbed CO 2 . After collecting the outgassed CO 2 , diluting the solution will result in a reversal of the acid–base reaction, basifying the solution and allowing for atmospheric CO 2 absorption. The experimental study examines a system that includes sodium cation as the alkalinity carrier, boric acid, and a polyol complexing agent that reversibly reacts with boric acid to strongly acidify solution upon concentration. Though the tested experimental system faces absorption rate and water capacity limitations, the ABCS process described here provides a basis for further process optimization. A generalized theoretical ABCS reaction framework is developed and different reaction orders and conditions are studied mathematically. Higher order reactions yield favorable cycle output results, reaching volumetric cycle capacity above 50 mM for third-order and 80 mM for fourth-order reactions. Optimal equilibrium constants are determined in order to guide alternative chemical searches and synthetic chemistry design targets. There is a substantial energetic benefit for reaction orders above the first, with second- and third-order ABCS cycles exhibiting a thermodynamic minimum work for the concentrating and outgassing steps around 150 kJ per mole of CO 2 . A significant advantage of the ABCS is that it can be driven through well-developed and widely-deployed desalination technologies, such as reverse osmosis, with opportunities for energy recovery when recombining the concentrated and diluted streams, and extraction can occur directly from the liquid phase upon vacuum application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct measurements for the kinetics of C–C bond fission in the high temperature decomposition of isopropanol

The thermal decomposition of isopropanol was studied experimentally and theoretically with a view to isolate and directly measure rate coefficients for the dominant radical channel in this multi-channel process. Two complementary shock tube methods, laser schlieren densitomtery and H-atom atomic resonance absorption spectroscopy, were used to obtain rate coefficents for the C–C bond fission channel. The experimental ranges span temperatures from 1200–2100 K and pressures between 30–690 torr. These are the most direct measurements of this rate coefficent in the fall-off regime of relevance to high-temperature reacting systems. Theoretical studies also performed in this work confirm that the title reaction and a molecular elimination involving dehydration were the sole unimolecular processes at high temperatures. A master equation analysis yielded k ( T, P ) for the C–C fission and these are shown to be in good agreement with the present experimental measurements. Comparisons with prior experimental and theoretical studies in the literature indicate branching ratios as well as absolute k ( T, P ) for C–C bond-fission have been under-predicted for this decomposition reaction. Consequently, results from the present studies place an increased emphasis on radical-driven secondary processes in high-temperature pyrolysis of this simplest secondary alcohol.

Kim, John H. [Univ. of Michigan, Ann Arbor, MI (Un↗
DOE OSTI2025

Directing the adsorption and assembly of laponite nano-discs at oil–water interfaces

Achieving tunable controls on the adsorption and self-assembly of nanoscale building blocks at immiscible fluid interfaces is essential for synthesizing advanced materials, stabilizing emulsions, and the sustainable storage and recovery of fluids. Although extensive efforts have been directed toward resolving the assembly of spherical nanoparticles at water–hydrocarbon interfaces, 2D nanoparticles have received far less attention. In this study, we developed novel controls to direct the adsorption and assembly of 2D laponite nano-discs (diameter = ∼30 nm and thickness = ∼1 nm) at water–heptane interfaces using traces of sodium dodecyl sulfate (SDS) surfactant, demonstrated by advanced in situ small-angle X-ray scattering, atomic force microscopy, spinning drop tensiometer measurements and molecular dynamics simulations. The results show that SDS surfactant displaces the adsorbed laponite nano-discs from the interface toward the aqueous phase. The extent of this displacement increases with SDS concentration such that high SDS concentrations convert laponite-rich interfaces to SDS-rich interfaces free of laponite nano-discs. This transformation is associated with significant alterations in the rheological and nanomechanical properties of the host interface. In this context, reduction in interfacial tension and interfacial stiffness and an increase in the interfacial deformation is observed on increasing the SDS concentration from 0 to 0.1 wt%. The displacement of laponite nano-discs from the interface is driven by strong electrostatic interactions between the hydrophilic SDS group and interfacial water molecules. These studies unlock new insights into the adsorption and assembly of 2D nanoscale particles at water–hydrocarbons interfaces that are relevant for various applications related to energy and environmental science and engineering.

interfacial tension↗
DOE OSTI2025

Solvation directed morphological control in metal oxide nanostructures

The development of structural hierarchy on various length scales during the crystallization process is ubiquitous in biological systems and minerals and is common in synthetic nanomaterials. The driving forces for the formation of complex architectures range from local interfacial interactions, that modify interfacial speciation, local supersaturation, and nucleation barriers, to macroscopic interparticle forces. Although it is enticing to interpret the formation of hierarchical architectures as the assembly of independently nucleated building blocks, crystallization pathways often follow monomer-by-monomer addition with structural complexity arising from interfacial chemical coupling and strongly correlated fluctuation dynamics in the electric double layers. Here, we show that the development of structural hierarchy through heterogeneous nucleation is driven by dipolar and solvation forces. Specifically, coupled simulations and experimental studies revealed that dipole build-up along the slow growth direction can trigger twinning and the development of branched architectures. Enthalpic solvation interactions were shown to either enhance or reduce the dipole moment of the nanoparticles and, thereby, control crystal morphology and architecture. The systematic studies of chemical coupling between different solvents and undercoordinated surface atoms of the growing nanocrystals revealed the mechanism of dimensionality control and the development of structural hierarchy without ligands or structure-directing agents.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Direct measurement of covalent three-center, two-electron M–H–B bonding in Zr and Hf borohydrides using B K-edge XAS

Metal borohydride complexes have long been the subject of intense fundamental interest because of their unconventional metal–ligand bonding that occurs via three-center, two-electron M–H–B bonds. This type of bonding implies significant delocalization of electron density over all three atoms, but the degree of orbital mixing between the metal and boron has been difficult to assess by direct experimental means. Herein, we demonstrate how ligand K-edge X-ray absorption spectroscopy (XAS) conducted at the B K-edge yields evidence of significant covalent M–H–B bonding with Zr and Hf. To accommodate the B K-edge XAS studies, which were conducted under ultra-high vacuum (<10 −8 torr), we prepared a series of new [Zr(RBH 3 ) 4 ] and [Hf(RBH 3 ) 4 ] complexes with substituents that attenuate volatility (R = benzyl, phenyl, mesityl, 2,4,6-triisopropylphenyl, and anthryl). 1 H and 11 B NMR spectroscopy, IR spectroscopy, and single-crystal X-ray diffraction (XRD) studies revealed metal and ligand dependent differences in the BH 3 chemical shifts that correlate to changes in M−B distances and select B–H vibrational stretching modes. The B K-edge XAS spectra of the Zr and Hf complexes yielded a pre-edge feature that was assigned as B 1s → M–H–B π* based on comparison to time-dependent density functional theory (TDDFT) calculations. The pre-edge transitions appear due to covalent mixing between boron and the metal, thereby demonstrating how B K-edge XAS can provide direct evidence of covalent three-center, two electron M–H–B bonding in borohydride complexes using boron as a spectroscopic reporter.

Hansen, Hannah M. [University of Iowa, Iowa City, ↗
DOE OSTI2025

Direct flue gas capture for algae cultivation and subsequent valorization: evaluating life cycle emissions and costs

Algae cultivation and processing is an important pathway under discussion within the broader CO 2 capture and utilization umbrella. Here, we discuss the results of a life-cycle analysis and techno-economic analysis of a pilot-scale photobioreactor that uses flue gas directly from natural gas or biogas combustion at 3–5% CO 2 concentration. The system requires minimal freshwater use as it has been successfully run with industrial wastewater and has a much smaller areal footprint compared with open pond cultivation. Introducing the flue gas directly to the photobioreactor avoids the need for CO 2 separation and pressurization, which is undertaken in many other algae cultivation systems. For the end-use of the biomass, the default case assumes conversion of algae to liquid fuels via hydrothermal liquefaction. The results indicate that the pilot-scale system has a higher cost, and comparable greenhouse gas emissions compared to pond-based systems, especially as the grid is anticipated to evolve to a lower carbon intensity. The costs of algae biofuel production range from $\$12–16$ per GGE at the current pilot scale. Depending on whether the source of the carbon is fossil or biogenic, the net emissions are 68 g CO 2 e per MJ and −4 g CO 2 e per MJ respectively. If the marine algae species is used instead of the freshwater species, it offers an additional 16 g CO 2 e per MJ carbon fixation in the form of calcium carbonate. The findings point to broadly desirable trends in GHG emissions and costs, while the discussion aims to shed light on areas that could further improve the scalability of the system.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2026

Water-stable direct air capture of CO 2 with microcapsules of task-specific ionic liquid and their electrothermal regeneration

Microcapsules of the task specific ionic liquid (TSIL) 1-ethyl-3-methylimidazolium 2-cyanopyrrolide [EMIM][2CNpyr] with composite polydimethylsiloxane (PDMS) shells were fabricated for use in CO 2 direct air capture (DAC) conditions. The TSIL was encapsulated using an oil-in-oil emulsion as a templating procedure through two different approaches. In the first approach, a PDMS-polyurea (PU) shell was constructed by interfacial polymerization, while in the second approach, a graphene oxide (GO)-PDMS shell was constructed by cross-linking GO sheets. The composition and structure of both capsule types were fully characterized, and their CO 2 DAC performance was evaluated by gravimetric and breakthrough analysis. Both capsules exhibited competitive capacities, with the PDMS-PU capsules and the GO-PDMS capsules reaching 0.75 mol kg −1 and 0.66 mol kg −1 , respectively. We further demonstrate that both capsule systems can be regenerated with complementary electrothermal methods. Microwave (MW) regeneration was used for the PDMS-PU capsules, effectively releasing absorbed CO 2 in less than an hour. Owing to the electrical conductivity of GO, GO-PDMS capsules were regenerated via radio frequency heating (RF). This work highlights the importance and opportunity of tuning solid–liquid composite performance for advanced applications, including direct air capture of carbon dioxide.

Al-Mahbobi, Luma [Texas A&M University, College St↗
DOE OSTI2018

The first direct double neutron star merger detection: Implications for cosmic nucleosynthesis

Context. The astrophysical r-process site where about half of the elements, heavier than iron are produced, has been a puzzle for several decades. Here we discuss the role of one of the leading ideas – neutron star mergers (NSMs) – in the light of the first direct detection of such an event in both gravitational (GW) and electromagnetic (EM) waves. Aims. Our aim is to understand the implications of the first GW/EM observations of a NSM for cosmic nucleosynthesis. Methods. We analyse bolometric and NIR lightcurves of the first detected double NSM and compare them to nuclear reaction network-based macronova models. Results. The slope of the bolometric lightcurve is consistent with the radioactive decay of neutron star ejecta with Ye ≲ 0.3 (but not larger), which provides strong evidence for an r-process origin of the electromagnetic emission. This rules out in particular “nickel winds” as major source of the emission. We find that the NIR lightcurves can be well fitted either with or without lanthanide-rich ejecta. Here, our limits on the ejecta mass together with estimated rates directly confirm earlier purely theoretical or indirect observational conclusions that double neutron star mergers are indeed a major site of cosmic nucleosynthesis. If the ejecta mass was typical, NSMs can easily produce all of the estimated Galactic r-process matter, and – depending on the real rate – potentially even more. This could be a hint that the event ejected a particularly large amount of mass, maybe due to a substantial difference between the component masses. This would be compatible with the mass limits obtained from the GW-observation. Conclusions. The recent observations suggests that NSMs are responsible for a broad range of r-process nuclei and that they are at least a major, but likely the dominant r-process site in the Universe.

79 ASTRONOMY AND ASTROPHYSICS↗