Results for “Design Visualization” — Page 94

NASA NTRSDate not supplied

Innovative Features of NASA's Celestial Mapping System to Support Exploration in the Lunar South Pole

Introduction: NASA's Celestial Mapping System (CMS) is developed to address the need for 3D tools for planetary science investigations, mission planning, in-situ operations, in a 3D-first design constructed around a unified view of a planetary globe. At present CMS provides many critical functionalities that include 1) Equipment planning and optimized placement on Lunar surface 2) Line of sight (visibility ) analysis 3) Powerful measurement tools based on 3D terrain with realistic 3D models to represent rovers, astronauts and equipment 4) Visualization of de-rived mapping products (e.g. resource maps), and 5) Data engine for hosting new observations that are not available in other contemporary lunar data tools. CMS is built on the foundation of powerful NASA WorldWind globe engines. In near future, users will be able to simultaneously deploy CMS onto multiple hardware configurations and platforms such as Windows, Linux, iOS and Android. The users will also have the flexibility to update to the latest imagery and terrain datasets as they are being acquired (in real time) before and/or during the exploration mission. CMS is also capable of consumption and analysis of data from locally hosted and external sources. It supports Open Geospatial Consorti-um (OGC) data and file standards, with current integrations of datasets from the Astrogeology Science Center of USGS which include global and local data acquired from NASA (LRO, Clementine, Lunar Orbiter) and JAXA (SELENE/Kaguya) with the capability of integrating more datasets. With development experience in both the end-user application and planetary engine side, CMS is also able to adapt to newer Lunar cartography standards as they develop and become recognized by international geospatial panels. Overcoming Polar Distortions: 3D geospatial applications traditionally suffer from significant distortion of imagery at the poles due to following reasons – 1) distortions in the source imagery 2) Incompatible tessellation algorithm on the poles 3) map projections. In the lunar context, with the focus on the South pole, this is not acceptable. The CMS team is researching ways to address polar distortion of imagery with new tessellation algorithms and by reprojecting the data using projections that are more accurate in polar scenarios. Figure1 shows the potential error introduced by different tessellation methods, represented by the red and green circles for Shoemaker crater. There is ~2 Km difference in the placement of the crater. Line of Sight Analysis and Traverse Planning: We have developed a built-in line of sight analysis (LOS) tool in CMS that analyzes the terrain profile and obstructions and provides the visibility of a given terrain for a remote observer. Figure 2 shows the viewshed analysis on the PSR in Nobile region. The PSR was created with help of HORUS generated images. The yellow pin shows the observer location outside the PSR. The yellow area shows the visible part of PSR. The obstructed area with no visibility for the observer is shown in red. This analysis was ex-tended further to set different heights for various observers and then perform the viewshed analysis. Combining the different visibility profiles can help designing improved traverses within the crater.

Geospatial Mapping↗

NASA NTRSDate not supplied

Innovative Features of NASA's Celestial Mapping System to Support Exploration in the Lunar South Pole

Introduction: NASA's Celestial Mapping System (CMS) is developed to address the need for 3D tools for planetary science investigations, mission planning, in-situ operations, in a 3D-first design constructed around a unified view of a planetary globe. At present CMS provides many critical functionalities that include 1) Equipment planning and optimized placement on Lunar surface 2) Line of sight (visibility ) analysis 3) Powerful measurement tools based on 3D terrain with realistic 3D models to represent rovers, astronauts and equipment 4) Visualization of de-rived mapping products (e.g. resource maps), and 5) Data engine for hosting new observations that are not available in other contemporary lunar data tools. CMS is built on the foundation of powerful NASA WorldWind globe engines. In near future, users will be able to simultaneously deploy CMS onto multiple hardware configurations and platforms such as Windows, Linux, iOS and Android. The users will also have the flexibility to update to the latest imagery and terrain datasets as they are being acquired (in real time) before and/or during the exploration mission. CMS is also capable of consumption and analysis of data from locally hosted and external sources. It supports Open Geospatial Consorti-um (OGC) data and file standards, with current integrations of datasets from the Astrogeology Science Center of USGS which include global and local data acquired from NASA (LRO, Clementine, Lunar Orbiter) and JAXA (SELENE/Kaguya) with the capability of integrating more datasets. With development experience in both the end-user application and planetary engine side, CMS is also able to adapt to newer Lunar cartography standards as they develop and become recognized by international geospatial panels. Overcoming Polar Distortions: 3D geospatial applications traditionally suffer from significant distortion of imagery at the poles due to following reasons – 1) distortions in the source imagery 2) Incompatible tessellation algorithm on the poles 3) map projections. In the lunar context, with the focus on the South pole, this is not acceptable. The CMS team is researching ways to address polar distortion of imagery with new tessellation algorithms and by reprojecting the data using projections that are more accurate in polar scenarios. Figure1 shows the potential error introduced by different tessellation methods, represented by the red and green circles for Shoemaker crater. There is ~2 Km difference in the placement of the crater. Line of Sight Analysis and Traverse Planning: We have developed a built-in line of sight analysis (LOS) tool in CMS that analyzes the terrain profile and obstructions and provides the visibility of a given terrain for a remote observer. Figure 2 shows the viewshed analysis on the PSR in Nobile region. The PSR was created with help of HORUS generated images. The yellow pin shows the observer location outside the PSR. The yellow area shows the visible part of PSR. The obstructed area with no visibility for the observer is shown in red. This analysis was ex-tended further to set different heights for various observers and then perform the viewshed analysis. Combining the different visibility profiles can help designing improved traverses within the crater.

Geospatial Mapping↗

NASA NTRS2022

Experimental Heat Transfer Results and Flow Visualization of Vertical Upflow Boiling in Earth Gravity with Subcooled Inlet Conditions – In Preparation for Experiments Onboard the International Space Station

Since 2012, researchers at the Purdue University Boiling and Two-Phase Flow Laboratory (PU-BTPFL) and NASA Glenn Research Center have been collaborating on a long-term effort to study flow boiling and condensation in microgravity. The ultimate goal has been to develop the Flow Boiling and Condensation Experiment (FBCE) for the International Space Station (ISS). Based on the findings from prior flow boiling experiments both at different orientations in Earth gravity and onboard parabolic flights simulating short durations of microgravity, a final refined experiment design, construction, and operating procedure have been arrived at for long-duration microgravity flow boiling experiments onboard the ISS. This study investigates flow boiling of n-Perfluorohexane with subcooled inlet in a rectangular channel of dimensions 114.6 mm heated length, 2.5 mm width, and 5 mm height. These pre-launch experiments (Mission Sequence Testing) were conducted in vertical upflow orientation in Earth gravity using the same experimental rig that was launched to the ISS in August 2021. The various operating parameters varied are heating configuration (single- and double-sided), mass velocity (180 – 3200 kg/m2s), inlet subcooling (+0 – 32°C, encompassing both highly subcooled and near-saturated inlet conditions), and inlet pressure (119 – 191 kPa). High-speed video flow visualization images are presented to explain the two-phase interfacial physics within the channel’s heated section. Heat transfer results in terms of flow boiling curves, streamwise profiles of wall temperature and heat transfer coefficient, and averaged heat transfer coefficients are analyzed and parametric effects elucidated. Severe temporal thermodynamic equilibrium is observed for near-saturated inlet at very low velocities. Nucleate boiling degradation starts at larger heat fluxes for single-sided heating than double sided at low mass velocities with highly subcooled inlet, and conversely at high mass velocities with near-saturated inlet. Nucleate boiling degradation can be delayed to higher heat fluxes by highly subcooling the inlet and increasing mass velocity. The entire local heat transfer coefficient profiles are degraded at higher heat fluxes for near-saturated inlet, but only the downstream part for highly subcooled inlet. This study also confirmed reliability of the upcoming ISS experimental data for subcooled inlet conditions and the collected Earth-gravity data will be used for comparison against the ISS data.

flow boiling↗

NASA NTRS2011

Telerobotic Excavator Designed to Compete in NASA's Lunabotics Mining Competition

The second annual NASA Lunabotics Mining competition is to be held in May 23-28, 2011. The goal of the competition is for teams of university level students to design, build, test and compete with a fully integrated lunar excavator on a simulated lunar surface. Our team, named Lunar Solutions I, will be representing Temple University's College of Engineering in the competition. The team's main goal was to build a robot which is able to compete with other teams, and ultimately win the competition. The main challenge of the competition was to build a wireless robot that can excavate and collect a minimum of 10 kilograms of the regolith material within 15 minutes. The robot must also be designed to operate in conditions similar to those found on the lunar surface. The design of the lunar excavator is constrained by a set of requirements determined by NASA and detailed in the competition's rulebook. The excavator must have the ability to communicate with the "main base" wirelessly, and over a Wi-Fi network. Human operators are located at a remote site approximately 60 meters away from the simulated lunar surface upon which the robot must excavate the lunar regolith surface. During the competition, the robot will operate in a separate area from the control room in an area referred to as the "Lunarena." From the control room, the operators will have to control the robot using visual feedback from cameras placed both within the arena and on the robot. Using this visual feedback the human operators control the robots movement using both keyboard and joystick commands. In order to place in the competition, a minimum of 10 kg of regolith material has to be excavated, collected, and dumped into a specific location. For that reason, the robot must be provided with an effective and powerful excavation system. Our excavator uses tracks for the drive system. After performing extensive research and trade studies, we concluded that tracks would be the most effective method for transporting the excavator. When designing the excavation system, we analyzed several design options from the previous year's competition. We decided to use a front loader to collect the material, rather than a conveyer belt system or auger. Many of the designs from last year's competition used a conveyer belt mechanism to mine regolith and dump it into a temporary storage bin place on the robot. Using the front end loader approach allowed us to combine the scooping system and storage unit, which meant that the excavation system required less space.

Nash, Rodney↗

NASA NTRSDate not supplied

The NASA Open Science Data Repository: Biomedical Data, Analysis Tools, and Informatic Collaborations

Increased biomedical risks and challenges associated with deep space missions require knowledge discovery, health countermeasures, and biomedical support capabilities. Maximally open-access and reusable data is needed by developers, scientists, and engineers to develop these systems. The NASA Open Science Data Repository (OSDR) is a maximally open access and FAIR database (ie., findable, accessible, interoperable, and reusable), and meets various scientific, technical, and operational needs. It offers users and submitters the ability to upload, download, search, share, analyze, cite, and visualize data across ‘omics, physiological, phenotypic, payload, hardware, behavioral, bioimaging, video, and environmental monitoring telemetry datasets. OSDR is an expanded database, based upon the successes of NASA GeneLab. OSDR has >460 studies with datasets covering model organisms to non-NASA human astronauts. There are ~12 datasets from the Inspiration 4 (I4) mission, spanning metagenomics, comprehensive metabolic panels, clonal hematopoiesis, spatial transcriptomics, proteomics, and cytokine panels. In the interest of data privacy, two I4 datasets with raw files relating to the epitranscriptome, and a new request feature is live in OSDR (with a backend review process established) developed from industry norms. OSDR is collecting and curating biomedical human data from a new sub-orbital research flight and is open to more space life science/biomedical submissions from the international and commercial sectors. OSDR also recently began a collaboration with the European Space Agency (ESA) to collect and curate >200 terabytes of human and model organism data. The OSDR submission portal is designed to ingest and curate ~25 ‘omics and ~50 physiological-phenotypic-imaging assay data types. Tools available for OSDR users include: 1) an Environmental Data Application to compare radiation, CO2, relative humidity, temperature, and other telemetry across missions and subjects, 2) the RadLab database, a collaboration between NASA, ESA, the German and Italian Space Agencies, and the Bulgarian Academy of Sciences, and 3) a Multi-study visualization tool which enables users to look across and combine ‘omics datasets. There are ~600 volunteer OSDR Analysis Working Group (AWG) members providing feedback on scientific data/metadata standards and collaborating to mine-reuse OSDR in research. OSDR/GeneLab has enabled ~60 publications reusing data as of October 2023.

space biology↗

NASA NTRS1981

The boundary layer on compressor cascade blades

The flow field about an airfoil in cascade at a Reynolds number of 5 x 10 to the 5th power is described. Hot wire and laser anemometry are combined with flow visualization techniques in order to obtain detailed flow data (e.g., boundary layer profiles, points of separation, and the transition zone) on a cascade of relatively highly loaded blades. Benchmark data is provided for the evaluation of current and future predictive models, in this way aiding in the compressor design process.

Deutsch, S.↗

NASA NTRS1984

A summary of rotorcraft handling qualities research at NASA Ames Research Center

The objectives of the rotorcraft handling qualities research program at Ames Research Center are twofold: (1) to develop basic handling qualities design criteria to permit cost effective design decisions to be made for helicopters, and (2) to obtain basic handling qualities data for certification of new rotorcraft configurations. The research on the helicopter handling qualities criteria has focused primarily on military nap-of-the-earth (NOE) terrain flying missions, which are flown in day visual meteorological conditions (VMC) and instrument meteorological conditions (IMC), or at night. The Army has recently placed a great deal of emphasis on terrain flying tactics in order to survive and effectively complete the missions in modern and future combat environments. Unfortunately, the existing Military Specification MIL-H 8501A which is a 1961 update of a 1951 document, does not address the handling qualities requirements for terrain flying. The research effort is therefore aimed at filling the void and is being conducted jointly with the Army Aeromechanics Laboratory at Ames. The research on rotorcraft airworthiness standards with respect to flying qualities requirements was conducted to collaboration with the Federal Aviation Administration (FAA).

Chen, R. T.↗

NASA NTRS1993

A full-scale STOVL ejector experiment

The design and development of thrust augmenting short take-off and vertical landing (STOVL) ejectors has typically been an iterative process. In this investigation, static performance tests of a full-scale vertical lift ejector were performed at primary flow temperatures up to 1560 R (1100 F). Flow visualization (smoke generators, yarn tufts and paint dots) was used to assess inlet flowfield characteristics, especially around the primary nozzle and end plates. Performance calculations are presented for ambient temperatures close to 480 R (20 F) and 535 R (75 F) which simulate 'seasonal' aircraft operating conditions. Resulting thrust augmentation ratios are presented as functions of nozzle pressure ratio and temperature. Full-scale experimental tests such as this are expensive, and difficult to implement at engine exhaust temperatures. For this reason the utility of using similarity principles -- in particular, the Munk and Prim similarity principle for isentropic flow -- was explored. At different primary temperatures, exit pressure contours are compared for similarity. A nondimensional flow parameter is then shown to eliminate primary nozzle temperature dependence and verify similarity between the hot and cold flow experiments. Under the assumption that an appropriate similarity principle can be established, then properly chosen performance parameters should be similar for both hot flow and cold flow model tests.

Barankiewicz, Wendy S.↗

NASA NTRS2003

Aerospace Communications Security Technologies Demonstrated

In light of the events of September 11, 2001, NASA senior management requested an investigation of technologies and concepts to enhance aviation security. The investigation was to focus on near-term technologies that could be demonstrated within 90 days and implemented in less than 2 years. In response to this request, an internal NASA Glenn Research Center Communications, Navigation, and Surveillance Aviation Security Tiger Team was assembled. The 2-year plan developed by the team included an investigation of multiple aviation security concepts, multiple aircraft platforms, and extensively leveraged datalink communications technologies. It incorporated industry partners from NASA's Graphical Weather-in-the-Cockpit research, which is within NASA's Aviation Safety Program. Two concepts from the plan were selected for demonstration: remote "black box," and cockpit/cabin surveillance. The remote "black box" concept involves real-time downlinking of aircraft parameters for remote monitoring and archiving of aircraft data, which would assure access to the data following the loss or inaccessibility of an aircraft. The cockpit/cabin surveillance concept involves remote audio and/or visual surveillance of cockpit and cabin activity, which would allow immediate response to any security breach and would serve as a possible deterrent to such breaches. The datalink selected for the demonstrations was VDL Mode 2 (VHF digital link), the first digital datalink for air-ground communications designed for aircraft use. VDL Mode 2 is beginning to be implemented through the deployment of ground stations and aircraft avionics installations, with the goal of being operational in 2 years. The first demonstration was performed December 3, 2001, onboard the LearJet 25 at Glenn. NASA worked with Honeywell, Inc., for the broadcast VDL Mode 2 datalink capability and with actual Boeing 757 aircraft data. This demonstration used a cockpitmounted camera for video surveillance and a coupling to the intercom system for audio surveillance. Audio, video, and "black box" data were simultaneously streamed to the ground, where they were displayed to a Glenn audience of senior management and aviation security team members.

Griner, James H.↗

NASA NTRS2008

Adjustable-Viewing-Angle Endoscopic Tool for Skull Base and Brain Surgery

The term Multi-Angle and Rear Viewing Endoscopic tooL (MARVEL) denotes an auxiliary endoscope, now undergoing development, that a surgeon would use in conjunction with a conventional endoscope to obtain additional perspective. The role of the MARVEL in endoscopic brain surgery would be similar to the role of a mouth mirror in dentistry. Such a tool is potentially useful for in-situ planetary geology applications for the close-up imaging of unexposed rock surfaces in cracks or those not in the direct line of sight. A conventional endoscope provides mostly a frontal view that is, a view along its longitudinal axis and, hence, along a straight line extending from an opening through which it is inserted. The MARVEL could be inserted through the same opening as that of the conventional endoscope, but could be adjusted to provide a view from almost any desired angle. The MARVEL camera image would be displayed, on the same monitor as that of the conventional endoscopic image, as an inset within the conventional endoscopic image. For example, while viewing a tumor from the front in the conventional endoscopic image, the surgeon could simultaneously view the tumor from the side or the rear in the MARVEL image, and could thereby gain additional visual cues that would aid in precise three-dimensional positioning of surgical tools to excise the tumor. Indeed, a side or rear view through the MARVEL could be essential in a case in which the object of surgical interest was not visible from the front. The conceptual design of the MARVEL exploits the surgeon s familiarity with endoscopic surgical tools. The MARVEL would include a miniature electronic camera and miniature radio transmitter mounted on the tip of a surgical tool derived from an endo-scissor (see figure). The inclusion of the radio transmitter would eliminate the need for wires, which could interfere with manipulation of this and other surgical tools. The handgrip of the tool would be connected to a linkage similar to that of an endo-scissor, but the linkage would be configured to enable adjustment of the camera angle instead of actuation of a scissor blade. It is envisioned that thicknesses of the tool shaft and the camera would be less than 4 mm, so that the camera-tipped tool could be swiftly inserted and withdrawn through a dime-size opening. Electronic cameras having dimensions of the order of millimeters are already commercially available, but their designs are not optimized for use in endoscopic brain surgery. The variety of potential endoscopic, thoracoscopic, and laparoscopic applications can be expected to increase as further development of electronic cameras yields further miniaturization and improvements in imaging performance.

Bae, Youngsam↗

NASA NTRS2010

Risk Assessment Using the Three Dimensions of Probability (Likelihood), Severity, and Level of Control

Traditional hazard analysis techniques utilize a two-dimensional representation of the results determined by relative likelihood and severity of the residual risk. These matrices present a quick-look at the Likelihood (Y-axis) and Severity (X-axis) of the probable outcome of a hazardous event. A three-dimensional method, described herein, utilizes the traditional X and Y axes, while adding a new, third dimension, shown as the Z-axis, and referred to as the Level of Control. The elements of the Z-axis are modifications of the Hazard Elimination and Control steps (also known as the Hazard Reduction Precedence Sequence). These steps are: 1. Eliminate risk through design. 2. Substitute less risky materials for more hazardous materials. 3. Install safety devices. 4. Install caution and warning devices. 5. Develop administrative controls (to include special procedures and training.) 6. Provide protective clothing and equipment. When added to the twodimensional models, the level of control adds a visual representation of the risk associated with the hazardous condition, creating a tall-pole for the least-well-controlled failure while establishing the relative likelihood and severity of all causes and effects for an identified hazard. Computer modeling of the analytical results, using spreadsheets and threedimensional charting gives a visual confirmation of the relationship between causes and their controls

Watson, Clifford↗

NASA NTRS2016

Remote Advanced Payload Test Rig (RAPTR) Portable Payload Test System for the International Space Station

The RAPTR was developed to test ISS payloads for NASA. RAPTR is a simulation of the Command and Data Handling (C&DH) interfaces of the ISS (MIL-STD1553B, Ethernet and TAXI) and is designed for rapid testing and deployment of payload experiments to the ISS. The ISS's goal is to reduce the amount of time it takes for a payload developer to build, test and fly a payload, including payload software. The RAPTR meets this need with its user oriented, visually rich interface.

De La Cruz, Melinda↗

NASA NTRSDate not supplied

AstroAmpSeq: Microbial Bioinformatics Education with NASA GeneLab’s Amplicon Pipeline

The prevalence and importance of large sequencing datasets in microbiology has led to a movement to share microbial ecology experimental data through open-access databases. This is particularly true of experiments that are difficult to replicate, such as those conducted in the spaceflight environment and shared via NASA GeneLab. It is now possible and indeed valuable for students to access and re-analyze these shared datasets for educational and research purposes. To provide students with experience utilizing microbial bioinformatics tools, GeneLab for Colleges and Universities (GL4U) has designed AstroAmpSeq, a week-long, virtually implemented project-based learning (PBL) minicourse to instruct undergraduate students on 16S amplicon sequencing. AstroAmpSeq was created to be accessible to students without prior bioinformatics or microbial ecology experience. During the minicourse students work in teams to process, analyze, and visualize a subsample of GeneLab dataset GLDS-280 using GeneLab’s standard amplicon processing pipeline, which is based in R. Students develop a hypothesis related to the dataset then generate and analyze figures to evaluate their hypothesis. Formative assessment of student learning is determined via pre- and post-evaluations, peer feedback, and self-reflection. Project and presentation rubrics serve as a summative assessment of student learning. GL4U AstroAmpSeq not only meets American Society for Microbiology Curriculum Guidelines, but also incites student interest in research by an inquiry-based approach and can be made part of a larger semester-long curriculum. GL4U AstroAmpSeq raises awareness of space microbiology and bioinformatics as a field and career path among undergraduates. Further, by using a GeneLab dataset and nesting microbiology techniques into the real-world application of space biology, AstroAmpSeq enforces deeper and longer-lasting student learning.

microbiology↗

NASA NTRS1981

Failure analysis of a tool steel torque shaft

A low design load drive shaft used to deliver power from an experimental exhaust heat recovery system to the crankshaft of an experimental diesel truck engine failed during highway testing. An independent testing laboratory analyzed the failure by routine metallography and attributed the failure to fatigue induced by a banded microstructure. Visual examination by NASA of the failed shaft plus the knowledge of the torsional load that it carried pointed to a 100 percent ductile failure with no evidence of fatigue. Scanning electron microscopy confirmed this. Torsional test specimens were produced from pieces of the failed shaft and torsional overload testing produced identical failures to that which had occurred in the truck engine. This pointed to a failure caused by a high overload and although the microstructure was defective it was not the cause of the failure.

Reagan, J. R.↗

NASA NTRS1983

Failure analysis of a tool steel torque shaft

A low design load drive shaft used to deliver power from an experimental exhaust heat recovery system to the crankshaft of an experimental diesel truck engine failed during highway testing. An independent testing laboratory analyzed the failure by routine metallography and attributed the failure to fatigue induced by a banded microstructure. Visual examination by NASA of the failed shaft plus the knowledge of the torsional load that it carried pointed to a 100 percent ductile failure with no evidence of fatigue. Scanning electron microscopy confirmed this. Previously announced in STAR as N82-11184

Reagan, J. R.↗

NASA NTRS1987

A CAD/CAE analysis of photographic and engineering data

In the investigation of the STS 51L accident, NASA engineers were given the task of visual analysis of photographic data extracted from the tracking cameras located at the launch pad. An analysis of the rotations associated with the right Solid Rocket Booster (SRB) was also performed. The visual analysis involved pinpointing coordinates of specific areas on the photographs. The objective of the analysis on the right SRB was to duplicate the rotations provided by the SRB rate gyros and to determine the effects of the rotations on the launch configuration. To accomplish the objectives, computer aided design and engineering was employed. The solid modeler, GEOMOD, inside the Structural Dynamics Research Corp. I-DEAS package, proved invaluable. The problem areas that were encountered and the corresponding solutions that were obtained are discussed. A brief description detailing the construction of the computer generated solid model of the STS launch configuration is given. A discussion of the coordinate systems used in the analysis is provided for the purpose of positioning the model in coordinate space. The techniques and theory used in the model analysis are described.

Goza, S. Michael↗

NASA NTRS2002

System IDentification Programs for AirCraft (SIDPAC)

A collection of computer programs for aircraft system identification is described and demonstrated. The programs, collectively called System IDentification Programs for AirCraft, or SIDPAC, were developed in MATLAB as m-file functions. SIDPAC has been used successfully at NASA Langley Research Center with data from many different flight test programs and wind tunnel experiments. SIDPAC includes routines for experiment design, data conditioning, data compatibility analysis, model structure determination, equation-error and output-error parameter estimation in both the time and frequency domains, real-time and recursive parameter estimation, low order equivalent system identification, estimated parameter error calculation, linear and nonlinear simulation, plotting, and 3-D visualization. An overview of SIDPAC capabilities is provided, along with a demonstration of the use of SIDPAC with real flight test data from the NASA Glenn Twin Otter aircraft. The SIDPAC software is available without charge to U.S. citizens by request to the author, contingent on the requestor completing a NASA software usage agreement.

Morelli, Eugene A.↗

NASA NTRS2000

A natural basis for efficient brain-actuated control

The prospect of noninvasive brain-actuated control of computerized screen displays or locomotive devices is of interest to many and of crucial importance to a few 'locked-in' subjects who experience near total motor paralysis while retaining sensory and mental faculties. Currently several groups are attempting to achieve brain-actuated control of screen displays using operant conditioning of particular features of the spontaneous scalp electroencephalogram (EEG) including central mu-rhythms (9-12 Hz). A new EEG decomposition technique, independent component analysis (ICA), appears to be a foundation for new research in the design of systems for detection and operant control of endogenous EEG rhythms to achieve flexible EEG-based communication. ICA separates multichannel EEG data into spatially static and temporally independent components including separate components accounting for posterior alpha rhythms and central mu activities. We demonstrate using data from a visual selective attention task that ICA-derived mu-components can show much stronger spectral reactivity to motor events than activity measures for single scalp channels. ICA decompositions of spontaneous EEG would thus appear to form a natural basis for operant conditioning to achieve efficient and multidimensional brain-actuated control in motor-limited and locked-in subjects.

NASA Discipline Space Human Factors↗