SEARCH · Engineering Papers

Results for “Conditional diffusion models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Amorphization kinetics in strontium titanate at 16 and 300 K under argon ion irradiation

Here, the accumulation of irradiation-induced disorder in SrTiO 3 single crystals irradiated at 16 K with 200 keV Ar ions has been investigated using Rutherford backscattering spectrometry along the < 100 > channeling direction and compared with previous results obtained at 300 K under identical irradiation conditions. As expected, amorphization at 16 K occurs at a much lower fluence than at 300 K due to dynamic recovery of irradiation-induced defects at 300 K. Utilizing a comprehensive damage accumulation model for analysis of the data, irradiation at 16 K results only in the formation of point defects and amorphous pockets, while defect clusters are also formed at 300 K. High defect mobility under irradiation at 300 K tends to promote recombination and clustering of point defects. These results suggest that defect diffusion processes in SrTiO 3 are not thermally active at 16 K.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Structural and chemical disorder enhance point defect diffusion and atomic transport in Ni 3 Al-based γ' phase

The ordered L1 2 γ' Ni 3 Al intermetallic inclusions are routinely used as strengthening constituents in Ni-based superalloys and recent high-entropy alloys. As there are different metallic elements relative to the alloy matrix, the composition of γ' phase inclusions usually suffers some variations. In this work, we studied the elemental partition and its influence on atomic transport properties in a model (NiCo) 3 Al γ' phase with chemical and structural disorder. Combining the Monte Carlo and molecular static techniques, we first determined the elemental distribution in such compositionally-complexed γ' phase. The results suggest that Co tends to segregate, which profoundly influences defect energetics and diffusion properties. By modeling thermally activated diffusion by molecular dynamics, we found that chemical disorder induced by Co can enhance vacancy diffusion while significantly suppress diffusion via interstitial atom migration, as compared to the stoichiometric γ' Ni 3 Al. We further reveal that these observations are closely related to the defect energetics in these systems. Furthermore, our results explain the effects of disorder, long- and short-range orders on the diffusion properties in multicomponent intermetallic alloys, which helps to understand the stability and, thus, γ'-phase-assisted strengthening at different conditions including annealing and irradiation.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Phase field benchmark problems for nucleation

In this work, we present nucleation phase field model benchmark problems, expanding on our previous benchmark problems on diffusion, precipitation, dendritic growth, linear elasticity, fluid flow and electrochemistry. Nucleation is the process in which either a new thermodynamic phase or a new structure is created, such as solidification from the melt, or self-assembly of particulates. Based on where the nucleation occurs, it can be divided into two main categories: homogeneous nucleation and heterogeneous nucleation. In the first nucleation benchmark problem, we focus on homogeneous nucleation for both single seed under different initial conditions and multiple seeds. The second nucleation benchmark problem focuses on athermal heterogeneous nucleation and nucleation behavior near the free growth limit with different undercooling driving forces.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Experimental Characterization of Hydrogen Diffusion in Shale Rocks for Geologic Storage Applications

As global energy systems undergo a transition to cleaner alternatives, geologic hydrogen storage has emerged as a promising solution for large-scale energy storage. A critical factor in determining the feasibility of this approach is the effectiveness of caprock formations, such as shale, in preventing hydrogen migration. This study investigates the diffusion behavior of hydrogen through shale to assess its suitability as a caprock for geologic hydrogen storage. Using a novel double-seal core holder design and a through-diffusion apparatus, hydrogen diffusion was measured through shale rock from the Eagle Ford and Wolfcamp Formations under dry conditions. These measurements were complemented by microstructural and mineralogical analyses using low-pressure nitrogen adsorption and X-ray diffraction. The effective diffusion coefficient of hydrogen in these shale caprocks ranged from 2.51 × 10 –8 to 9.85 × 10 –8 m 2 /s. Notably, we observed that the diffusion behavior was more related to the pore network structure and could not be attributed to differences in the total pore volume between shale types alone. Here, to further understand the role of pore network complexity, a fractal pore model was developed to correlate tortuosity with the fractal dimension of the pore structure (a measure of pore network complexity). The proposed model closely matched tortuosity values obtained from diffusion experiments, outperforming existing theoretical tortuosity–porosity correlations. These findings provide key quantitative parameters needed to assess the feasibility of geologic hydrogen storage as well as insights that can be applied to hydrogen storage in a range of geologic formations.

08 HYDROGEN↗

DOE OSTI2020

Baroclinic Residual Circulation and Mass Transport Due to Internal Tides

Baroclinic (BC) tidal residual circulation due to internal tides is investigated around islands over a shallow ridge using a numerical ocean model. Internal tides enhance vertical mixing over shallow slopes, leading to horizontal density gradients that drive BC residual circulation along the main thermocline. For a strongly stratified summer case, the vertical diffusivity estimated by the Mellor and Yamada turbulence closure model exceeds 1 × 10 -2 m 2 s -1 , and the velocity of BC residual circulations reaches 0.2 m s -1 . The magnitude of BC residual circulation is larger than that of barotropic residual tidal circulation, implying that BC residual circulation due to internal tides plays an important role in coastal ocean circulation. Furthermore, BC residual flow accounts for an equal percentage (5%) of the total tidal kinetic energy as the barotropic residual flow under summer stratification conditions. Results from a coupled sediment resuspension and transport model show the growth of intermediate nepheloid layers formed by strong bottom shear stress and BC residual flow. The residual component contributes largely (23% of the total in summer) to the total suspended sediment flux. Seasonal variability is explored, with weaker winter stratification leading to reduced mixing, and thus weaker BC residual circulation and sediment flux. Lastly, the magnitude of the BC residual circulation is also shown to be proportional to the square of the tidal amplitude.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

The role of diffusion-driven pure climb creep on the rheology of bridgmanite under lower mantle conditions

The viscosity of Earth’s lower mantle is poorly constrained due to the lack of knowledge on some fundamental variables that affect the deformation behaviour of its main mineral phases. This study focuses on bridgmanite, the main lower mantle constituent, and assesses its rheology by developing an approach based on mineral physics. Following and revising the recent advances in this field, pure climb creep controlled by diffusion is identified as the key mechanism driving deformation in bridgmanite. The strain rates of this phase under lower mantle pressures, temperatures and stresses are thus calculated by constraining diffusion and implementing a creep theoretical model. The viscosity of MgSiO3 bridgmanite resulting from pure climb creep is consequently evaluated and compared with the viscosity profiles available from the literature. We show that the inferred variability of viscosity in these profiles can be fully accounted for with the chosen variables of our calculation, e.g., diffusion coefficients, vacancy concentrations and applied stresses. A refinement of these variables is advocated in order to further constrain viscosity and match the observables.

58 GEOSCIENCES↗

DOE OSTI2019

One-body Langevin dynamics in heavy-ion collisions at intermediate energies

We present here a new framework to treat the dissipation and fluctuation dynamics associated with nucleon-nucleon scattering in heavy-ion collisions. The two-body collision processes are effectively described in terms of the diffusion of nucleons in viscous nuclear media, governed by a set of Langevin equations in momentum space. The new framework combined with the usual mean-field dynamics can be used to simulate heavy-ion collisions at intermediate energies. As a proof of principle, we simulate Au + Au reactions and obtain results consistent with other existing codes under the same constrained conditions. Furthermore, we study the formation of fragments in Sn + Sn reactions at 50 MeV/nucleon, and results are discussed and compared to two other models commonly employed for collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2019

Governing Constraints of Chromium(VI) Formation from Chromium(III)-Bearing Minerals in Soils and Sediments

The potential for geogenic Cr(VI) contamination is vast, yet it is difficult to predict susceptible environments as groundwater Cr(VI) concentrations vary significantly, even within a given aquifer, due to physical and hydrologic heterogeneity. The physical structure of soils and sediments exerts a dominant control on Cr(VI) production by dictating the separation distance of reactive phases, the diffusion distance from Cr(VI) generation sites to advecting groundwater, and by influencing infiltration rates and porewater velocity. Here, we used a dual-pore domain model to investigate the relative control of these parameters on Cr(VI) production. The reaction distance between Cr(III)-bearing minerals and Mn oxides predominantly controls Cr(VI) export to advecting groundwater, while changes in diffusion distance between sites of Cr(VI) generation and advective flow channels generally have little impact on steady-state Cr(VI) concentrations. Changes in Cr(VI) diffusion distance can, however, increase the time required for groundwater Cr(VI) concentrations to reach a steady-state; thus, under fluctuating hydrologic and biogeochemical conditions, long diffusion distances still have the potential to suppress Cr(VI) supply to advecting water. Furthermore, we show that high porewater flow velocities effectively dilute Cr(VI) diffusing from soil/sediment aggregates, thus minimizing Cr(VI) concentrations relative to lower porewater velocities. The strong control that the physical/hydrologic parameters exert on Cr(VI) production appears to overwhelm the impact of Cr(III)-mineral solubility within soils and sediments.

Hausladen, Debra (ORCID:0000000342356294)↗

DOE OSTI2017

Cosmic Ray Acceleration by a Versatile Family of Galactic Wind Termination Shocks

There are two distinct breaks in the cosmic ray (CR) spectrum: the so-called “knee” around 3 × 10{sup 15} eV and the so-called “ankle” around 10{sup 18} eV. Diffusive shock acceleration (DSA) at supernova remnant (SNR) shock fronts is thought to accelerate galactic CRs to energies below the knee, while an extragalactic origin is presumed for CRs with energies beyond the ankle. CRs with energies between 3 × 10{sup 15} and 10{sup 18} eV, which we dub the “shin,” have an unknown origin. It has been proposed that DSA at galactic wind termination shocks, rather than at SNR shocks, may accelerate CRs to these energies. This paper uses the galactic wind model of Bustard et al. to analyze whether galactic wind termination shocks may accelerate CRs to shin energies within a reasonable acceleration time and whether such CRs can subsequently diffuse back to the Galaxy. We argue for acceleration times on the order of 100 Myr rather than a few billion years, as assumed in some previous works, and we discuss prospects for magnetic field amplification at the shock front. Ultimately, we generously assume that the magnetic field is amplified to equipartition. This formalism allows us to obtain analytic formulae, applicable to any wind model, for CR acceleration. Even with generous assumptions, we find that very high wind velocities are required to set up the necessary conditions for acceleration beyond 10{sup 17} eV. We also estimate the luminosities of CRs accelerated by outflow termination shocks, including estimates for the Milky Way wind.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1988

The budget of biologically active ultraviolet radiation in the earth-atmosphere system

This study applies the concept of a budget to describe the interaction of solar ultraviolet (UV) radiation with the earth-atmosphere system. The wavelength ranges of interest are the biologically relevant UV-B between 280 and 320 nm and the UV-A from 32000 to 400 nm. The Nimbus 7 solar backscattered ultraviolet (SBUV) instrument provides measurements of total column ozone and information concerning cloud cover which, in combination with a simple model of radiation transfer, define the fractions of incident solar irradiance absorbed in the atmosphere, reflected to space, and absorbed at the ground. Results for the month of July quantify the contribution of fractional cloud cover and cloud optical thickness to the radiation budget's three components. Scattering within a thick cloud layer makes the downward radiation field at the cloud base more isotropic than is the case for clear skies. For small solar zenith angles, typical of summer midday conditions, the effective pathlength of this diffuse irradiance through tropospheric ozone is greater than that under clear-sky conditions. The result is an enhanced absorption of UV-B radiation in the troposphere during cloud-covered conditions. Major changes in global cloud cover or cloud optical thicknesses could alter the ultraviolet radiation received by the biosphere by an amount comparable to that predicted for long-term trends in ozone.

Frederick, John E.↗

NASA NTRS1990

Influence of residual gravity on crystal growth processes

The effects of steady and time-dependent residual accelerations on representative melt and solution crystal growth systems have been investigated using numerical models. For the melt growth system, it was found that the lateral nonuniformity in crystal composition, depending on the particular operating conditions, can be very sensitive to the orientation of the steady component of the residual gravity vector down to 10 to the -6th g. Oscillatory residual accelerations (g-jitter) were found to lead to transients in the dopant distribution. For the solution growth, longtime simulations showed that at 10 to the -5th g, and the cooling rates used in Spacelab 3 experiments, diffusive transport dominates only in the beginning. Convective transport becomes increasingly significant after 3 to 5 hours, depending on the orientation of the crystal in the residual gravity field.

Rosenberger, F.↗

NASA NTRS1991

Urban light pollution - The effect of atmospheric aerosols on astronomical observations at night

The transfer of diffuse city light from a localized source through a dust-laden atmosphere with optical depth less than 0.5 has been analyzed in the source-observer plane on the basis of an approximate treatment. The effect on several types of astronomical observation at night has been studied, considering different size distributions and amounts as well as particle shapes of the aerosols. The analysis is made in terms of the signal-to-noise ratios for a given amount of aerosol. The model is applied to conditions at the Wise Astronomical Observatory in the Negev desert, and limiting backgrounds for spectroscopy, photometry, and photography of stars and extended objects have been calculated for a variety of signal-to-noise ratios. Applications to observations with different equipment at various distances from an urban area of any size are possible. Due to the use of signal-to-noise ratios, the conclusions are different for the different experimental techniques used in astronomy.

Joseph, Joachim H.↗

NASA NTRS2003

Final Summary of Research Report to the National Aeronautics and Space Administration Origins of Solar Systems Program

The chondrites are aggregates of components (e.g. chondrules, chondrule rims and matrix) that formed in the nebula but, at present, there is no consensus on how any of these components formed or whether their formation produced or post dated the chemical fractionations between the chondrites. Chondrites are, at present, the most primitive Solar System objects available for laboratory study and the conditions under which their principle components formed would provide the most direct constraints for models of nebula formation and evolution. The conditions under which chondrules formed is of particular importance because, if their relative abundance in chondrites approximates that in the nebula, they are the products of one of the most energetic and pervasive processes that operated in the early Solar System. The goal of this proposal was to combine theoretical modeling with a comprehensive study of the elemental and isotopic compositions of the major components in unequilibrated ordinary chondrites (UOCs), with the aim of determining the conditions in the nebula at the time of their formation. The isotopes of volatile and moderately volatile elements should be particularly revealing of conditions during chondrule formation, as evaporation under most conditions would lead to isotopic mass fractionation. Modeling of chondrule and matrix formation requires the development of a kinetic model of evaporation and condensation, and calibration of this model against experiments. Cosmic spherules present an opportunity to test our evaporation models under flash heating conditions that would be difficult to simulate experimentally. However, there is surprisingly little known about the isotopic compositions of silicate cosmic spherules, and a number of questions need to be addressed. Is the range of compositions they exhibit due to evaporation? If they are, are the relative volatilities consistent with the models/experiments and are the isotopic fractionations consistent with Rayleigh conditions? For instance, do the alkalis and S evaporate prior to significant melting so that conditions did not meet the Rayleigh criteria of rapid diffusion? If so, their isotopic fractionation might be considerably suppressed. Could this mechanism of K loss apply to chondrule formation? The Fe isotopic fractionation during evaporation of silicates has not been measured, so cosmic spherules might provide a clue to whether FeO diffusion is fast enough to maintain Rayleigh conditions during evaporation. And so on.

O'D. Alexander, Conel↗

NASA NTRS2004

Evaporation and Accompanying Isotopic Fractionation of Sulfur from FE-S Melt During Shock Wave Heating

Chondrules probably formed by melting and subsequent cooling of solid precursors. Evaporation during chondrule melting may have resulted in depletion of volatile elements in chondrules. It is known that kinetic evaporation, especially evaporation from a melt, often leads to enrichment of heavy isotopes in an evaporation residue. However, no evidence for a large degree of heavy-isotope enrichment has been reported in chondrules for K, Mg, Si, and Fe (as FeO). The lack of isotopic fractionation has also been found for sulfur in troilites (FeS) within Bishunpur (LL3.1) and Semarkona (LL3.0) chondrules by an ion microprobe study. The largest fractionation, found in only one grain, was 2.7 +/- 1.4 %/amu, while all other troilite grains showed isotopic fractionations of <1 %/amu. The suppressed isotopic fractionation has been interpreted as results of (i) rapid heating of precursors at temperatures below the silicate solidus and (ii) diffusion-controlled evaporation through a surrounding silicate melt at temperatures above the silicate solidus. The kinetic evaporation model suggests that a rapid heating rate of >10(exp 4)-10(exp 6) K/h for a temperature range of 1000-1300 C is required to explain observed isotopic fractionations. Such a rapid heating rate seems to be difficult to be achieved in the X-wind model, but can be achieved in shock wave heating models. In this study, we have applied the sulfur evaporation model to the shock wave heating conditions of to evaluate evaporation of sulfur and accompanying isotopic fractionation during shock wave heating at temperatures below the silicate solidus.

Tachibana, S.↗

NASA NTRS2019

Permeation Rate Equations for Hydrogen and Deuterium in a Palladium-Silver Alloy

Mass transfer of a gas through a selective, solid membrane is an effective method for separation of desired species. This selective permeability is evident in the flow of hydrogen and the isotope deuterium through palladium-silver metal alloy media. In this study, based upon Sieverts’s law and the Arrhenius diffusion equation, an empirical correlation was developed to determine the steady-state permeation rate R, dependence on media temperature T, gas supply pressure p(sub S), and gas backpressure p(sub B) on the lower pressure side. Because of an extensive range of experimental conditions and complete reporting of raw data, the research by Ackerman and Koskinas was used as a source for data allowing empirical equation fitting. Unfortunately, those authors reported best-fit equations that poorly represented their own results. To improve the modeling of the original data and demonstrate the quality of the measurements, the current study develops improved hydrogen and deuterium permeation rate equations: P = 4.22×10(exp −6) A[exp(−704/T)](sq. root p(sub S) − sq. root p(sub B))/t for hydrogen P = 2.12×10(exp −6) A[exp(−468/T )](sq. root p(sub S) − sq. root p(sub B))/t for deuterium for values of cross-sectional area A (sq.cm), medium thickness t (cm), pressure p (psia), and temperature T (Kelvin), giving a permeation rate in mole/minute. These equations model permeation rate data more closely than do several other existing literature sources.

Smith, Phillip J.↗

DOE OSTI2012

THE LOW-TEMPERATURE NUCLEAR SPIN EQUILIBRIUM OF H{sup +} {sub 3} IN COLLISIONS WITH H{sub 2}

Recent observations of H{sub 2} and H{sup +} {sub 3} in diffuse interstellar sightlines revealed a difference in the nuclear spin excitation temperatures of the two species. This discrepancy comes as a surprise, as H{sup +} {sub 3} and H{sub 2} should undergo frequent thermalizing collisions in molecular clouds. Non-thermal behavior of the fundamental H{sup +} {sub 3}/H{sub 2} collision system at low temperatures was considered as a possible cause for the observed irregular populations. Here, we present measurements of the steady-state ortho/para ratio of H{sup +} {sub 3} in collisions with H{sub 2} molecules in a temperature-variable radiofrequency ion trap between 45 and 100 K. The experimental results are close to the expected thermal outcome and they agree very well with a previous micro-canonical model. We briefly discuss the implications of the experimental results for the chemistry of the diffuse interstellar medium.

74 ATOMIC AND MOLECULAR PHYSICS↗

NASA NTRS1991

Velocity and pressure characteristics of a model SSME high pressure fuel turbopump

Under the present effort an experiment rig has been constructed, an instrumentation package developed and a series of mean and rms velocity and pressure measurements made in a turbopump which modelled the first stage of the Space Shuttle Main Engine (SSME) High Pressure Fuel Turbopump. The rig was designed so as to allow initial experiments with a single configuration consisting of a bell-mouth inlet, a flight impeller, a vaneless diffuser and a volute. Allowance was made for components such as inlet guide vanes, exit guide vanes, downstream pumps, etc. to be added in future experiments. This flexibility will provide a clear baseline set of experiments and allow evaluation in later experiments of the effect of adding specific components upon the pump performance properties. The rotational speed of the impeller was varied between 4260 and 7680 rpm which covered the range of scaled SSME rotation speeds when due allowance is made for the differing stagnation temperature, model to full scale. The results at the inlet obtained with rotational speeds of 4260, 6084 and 7680 rpm showed that the axial velocity at the bell-mouth inlet remained roughly constant at 2.2 of the bulk velocity at the exit of the turbopump near the center of the inlet, but it decreased rapidly with increasing radius at all three speeds. Reverse flow occurred at a radius greater than 0.9 R for all three speeds and the maximum negative velocity reduced from 1.3 of the bulk velocity at the exit of the turbopump at 4260 rpm to 0.35 at 7680 rpm, suggesting that operating at a speed closer to the design condition of 8700 rpm improved the inlet characteristics. The reverse flow caused positive prerotation at the impeller inlet which was negligibly small near the center but reached 0.7 of the impeller speed at the outer annulus. The results in the diffuser and the volute obtained at 7680 rpm show that the hub and shroud walls of the diffuser were characterized by regions of transient reverse flow with negative revolution-averaged velocity of 8 percent of the maximum forward revolution-averaged velocity at the center of the diffuser passage near the shroud wall.

Tse, D. G-N.↗

NASA NTRS1981

Stability of a diffuse linear pinch with axial boundaries

A formulation of the stability behavior of a finite-length pinch is presented. A general initial perturbation is expressed as a uniformly convergent sum over a complete discrete k set. A variational calculation is then performed, based on the energy principle, in which the end-boundary conditions appear as constraints. The requisite Lagrange multipliers mutually couple the elemental periodic excitations. The resulting extended form of delta-W still admits a proper second-variation treatment so that the minimization and stability considerations of Newcomb remain applicable. Comparison theorems are discussed as is the relevance of this end-effect model to the stability of solar coronal loops.

Einaudi, G.↗