Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AERODYNAMICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Aerodynamic and Acoustic Performance Testing of Metal Spacecraft Cabin Ventilation Fan

A metal spacecraft cabin ventilation fan suitable for aerodynamic and acoustic ground tests was designed and two copies of the fan assembly were fabricated. Both fans were tested for aerodynamic performance and acoustic levels in the NASA Glenn Research Center Acoustical Testing Laboratory. A new test rig for small axial flow fans was designed to accommodate the instrumentation and back-pressure adjustments. Measurements included were: static pressures for measuring performance, a 72-channel in-duct microphone array, external microphone measurements for acoustics, and inter-stage hot wire measurements of the fan wake. The present report documents the test setup. A series of follow on reports documents the results. These fan units, the data and the test facility described herein are valuable resources available for supporting NASA’s aeronautics research and space exploration missions.

Small Fan Noise↗

Icing Physics Studies Using the 3D SIDRM Test Article: Aerodynamic and Supercooled Liquid Icing Analysis

In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation capability. Experimental data is required for development of icing physics models and simulation validation. To that end, this paper presents the analysis of the supercooled liquid icing data subset from tests conducted in 2022 at the NASA Icing Research Tunnel that studied both supercooled water and ice-crystal icing. The test article that was utilized replicated 3D geometrical features of an inter-compressor duct and strut region of a turbofan engine. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with pressure taps, heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, and a scale to measure ice mass were utilized to characterize the icing behavior. The aim of these tests was to generate ice accretions on the SIDRM test article under well-characterized supercooled liquid icing and ice crystal icing conditions. This paper discusses measurements related to aerodynamic testing and supercooled liquid icing tests that were conducted. Aerodynamic measurements were analyzed and compared to computational simulations and were found to be in good agreement for the range of airspeeds (50 to 230 knots) and angles of attack (0 to 4°) tested. Various parametric sweeps were conducted during the supercooled liquid icing portion of the test entry (cloud median volumetric diameter ranged from 15 to 90 µm, total air temperature from -3 to -17 °C, angle of attack from 0 to 4°, and accretion time from 5 to 20 min). These sweeps were performed to measure that parameter’s impact on ice accretion size, location (icing extent), characteristics (such as glaze/rime ice and shedding behavior), and test article surface temperature. Analysis of the test data showed that clouds composed of larger drops, colder air temperatures, smaller angles of attack, and longer spray times were the primary parameters that resulted in accretions with greater ice mass. Test article angle of attack and cloud droplet size influenced the location of ice accretion as these two parameters directly impact collection efficiency. With respect to icing characteristics, total air temperature dictated icing type, and smaller cloud drop size along with warmer air temperatures resulted in greater amounts of ice shedding. Surface temperature increased during ice accretion from the release of latent (fusion) heat, where total air temperature and cloud drop size impacted the amount of surface temperature change. The icing measurements collected during the SIDRM tests will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assesses the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost effective way.

supercooled liquid icing↗

Icing Physics Studies Using the 3D SIDRM Test Article: Aerodynamic and Supercooled Liquid Icing Analysis

In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation capability. Experimental data is required for development of icing physics models and simulation validation. To that end, this paper discusses analyzed data from icing tests conducted with a 3D test article in 2022 at the NASA Icing Research Tunnel. The test article, whose geometry is representative of an inter-compressor duct and strut region of a turbofan engine, has been designed and constructed to study the physics of supercooled water icing and ice crystal icing. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with pressure taps, heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, and a scale to measure ice mass were utilized to characterize the icing behavior. The aim of these tests was to generate ice accretions on the SIDRM test article under well-characterized supercooled liquid icing and ice crystal icing conditions. This paper discusses measurements related to aerodynamic tests and supercooled liquid icing tests that were conducted. Aerodynamic measurements were analyzed and compared to computational simulations and were found to be in good agreement for the range of airspeeds (50 to 230 knots) and angles of attack (0 to 4°) tested. Various parametric sweeps were conducted during the supercooled liquid icing portion of the test entry (cloud median volumetric diameter ranged from 15 to 90 µm, total air temperature from -3 to -17 °C, angle of attack from 0 to 4°, and accretion time from 5 to 20 min). These sweeps were performed to measure that parameter’s impact on ice accretion size, location, characteristics (such as glaze/rime ice and shedding behavior), and test article surface temperature. Analysis of the test data showed that clouds composed of larger drops, colder air temperatures, smaller angles of attack, and longer spray times were the primary parameters that resulted in accretions with greater ice mass. Test article angle of attack and cloud droplet size influenced the location of ice accretion as these two parameters directly impact collection efficiency. With respect to icing characteristics, total air temperature dictated icing type, and smaller cloud drop size along with warmer air temperatures resulted in greater amounts of ice shedding. Surface temperature increased during ice accretion from the release of latent (fusion) heat, where total air temperature and cloud drop size impacted the amount of surface temperature change. The icing measurements collected during the SIDRM tests will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assesses the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost‑effective way.

supercooled liquid icing↗

Advancements to Wind Tunnel Testing at the Marshall Space Flight Center Aerodynamic Research Facility by the Utilization of Additively Manufactured Models

In recent years, the Aerodynamic Research Facility (ARF) at NASA’s Marshall Space Flight Center (MSFC) has heavily utilized additive manufacturing (AM) technology for the manufacturing of models for aerodynamic testing in the 14 x 14-inch Trisonic Wind Tunnel (TWT). This process change resulted in speed and cost improvements to the design and manufacture of model parts, which has provided the capability to perform parametric tests at a rapid pace with high fidelity models that are more finely detailed than previously tested. This paper outlines the model design and fabrication workflow of the ARF and the improvements made, focusing specifically on two vehicles tested. First, identical traditionally machined and AM models of a test missile configuration were tested to isolate effects of differences in manufacturing. Second, a high-fidelity model of NASA’s Space Launch System (SLS) was tested to investigate improvements in data quality possible by utilizing AM on small-scale wind tunnel tests. This paper also discusses detailed model inspections and data comparisons that were performed to prove the reliability of data across the TWT’s entire Mach range.

Ryan C Connelly↗

Aerodynamic Implications of Aerocapture Systems for Uranus Orbiters

Exploration of the Ice Giants, Uranus in particular, has been indicated as the highest priority new flagship-class mission by the 2022 Planetary Science Decadal Survey. However, due to it’s location in the solar system, extensive travel time and resources are required for a mission to reach Uranus. Aerocapture offers shorter interplanetary transit times and reduced propellant requirements for such a mission when compared to a traditional propulsive-capture orbiter. Considerations for the aerodynamics of an aerocapture system enabling flagship-class science mission to Uranus are presented. The applicability of a low lift-to-drag entry vehicle aeroshell with flight heritage to a new planet and atmosphere is evaluated. A preliminary aerodatabase is formulated from low-fidelity methods and heritage flight mission data to provide initial estimates of trajectory space to be considered for inserting a spacecraft into orbit at Uranus using aerocapture. Computational fluid dynamics calculations in the free molecular, transitional, and continuum regimes using Direct Simulation Monte Carlo and Navier-Stokes solutions are used to assess the validity of this preliminary aerodatabase. The considered entry vehicle is found to varying levels of agreement with work done by previous flight missions when evaluated for flight in Uranus’ atmosphere. Implications for the aerodynamics of this vehicle as applied in an aerocapture system in flight at Uranus as found by the current work are discussed.

Eli R. Shellabarger↗

Aerodynamic Implications of Aerocapture Systems for Uranus Orbiters

Exploration of the Ice Giants, Uranus in particular, has been indicated as the highest priority new flagship-class mission by the 2022 Planetary Science Decadal Survey. However, due to it's location in the solar system, extensive travel time and resources are required for a mission to reach Uranus. Aerocapture offers shorter interplanetary transit times and reduced propellant requirements for such a mission when compared to a traditional propulsive-capture orbiter. Considerations for the aerodynamics of an aerocapture system enabling flagship-class science mission to Uranus are presented. The applicability of a low lift-to-drag entry vehicle aeroshell with flight heritage to a new planet and atmosphere is evaluated. A preliminary aerodatabase is formulated from low-fidelity methods and heritage flight mission data to provide initial estimates of trajectory space to be considered for inserting a spacecraft into orbit at Uranus using aerocapture. Computational fluid dynamics calculations in the free molecular, transitional, and continuum regimes using Direct Simulation Monte Carlo and Navier-Stokes solutions are used to assess the validity of this preliminary aerodatabase. The considered entry vehicle is found to varying levels of agreement with work done by previous flight missions when evaluated for flight in Uranus' atmosphere. Implications for the aerodynamics of this vehicle as applied in an aerocapture system in flight at Uranus as found by the current work are discussed.

Uranus↗

Development of Aerodynamic Loads Databases for the Space Launch System Booster Separation Event

Booster separation is a mission-critical event within the orbital ascent of the Space Launch System (SLS). The complexity of the engine plume-affected, multibody, supersonic aerodynamics is compounded by the large span of the likely trajectory space. Characterization of the multiple input, multiple output system requires a combination of wind tunnel testing and computational simulation, but additional data processing is also required before the sparse, high-fidelity data can be fused into a continuous database with acceptable uncertainty quantification. This paper outlines the state of this approach as it has been applied to the most recent SLS booster separation aerodynamic loads database: that of the Artemis II launch vehicle.

Michael W Lee↗

Simulating Transonic Buffet Aerodynamics for the Boeing Transonic Truss-Braced Wing Aircraft

The flow past the Boeing Transonic Truss-Braced Wing (TTBW) aircraft is simulated with a Hybrid Reynolds-Averaged Navier Stokes Large-Eddy Simulations (HRLES) turbulence modeling approach to study transonic buffet onset and evaluate the predictive capability of the numerical approach. All simulations used structured overset curvilinear grids for the free-air configuration, with all simulations performed using the Launch, Ascent, and Vehicle Aerodynamics (LAVA) computational framework. Aerodynamic loads and surface pressure obtained from the HRLES solutions are compared to results from unsteady RANS (URANS) and experiments conducted at NASA Ames 11-by 11-Foot Transonic Wind Tunnel. Overall good agreement is obtained in the predicted loads and surface pressure. Unsteady pressure data from HRLES and URANS simulations is utilized to compute power spectral density (PSD) to predict transonic buffet onset and compared to the Kulite data obtained from the experiment. Comparisons of the PSD spectrum also show reasonable agreement with the wind tunnel data, with HRLES and URANS predicting buffet onset at a slightly earlier angle-of-attack than the experiment.

AATT↗

Development of Aerodynamic Loads Databases for the Space Launch System Booster Separation Event

Booster separation is a mission-critical event within the orbital ascent of the Space Launch System (SLS). The complexity of the engine plume-affected, multibody, supersonic aerodynamics is compounded by the large span of the likely trajectory space. Characterization of the multiple input, multiple output system requires a combination of wind tunnel testing and computational simulation, but additional data processing is also required before the sparse, high-fidelity data can be fused into a continuous database with acceptable uncertainty quantification. This paper outlines the state of this approach as it has been applied to the most recent SLS booster separation aerodynamic loads database: that of the Artemis II launch vehicle.

Michael Lee↗

Uncertainty Modeling for Mars Ascent Vehicle’s Aerodynamic Database Development

The design of the Mars Ascent Vehicle - Mars Sample Return (MAV-MSR) trajectories requires an accurate assessment of flight performance. Typically, these trajectories are developed by flight mechanics analysis to meet complex mission requirements and then flight performance assessed through Monte Carlo simulations. Consequently, it is crucial to develop an aerodynamic aerodatabase as an input model for flight mechanics analysis to provide static and dynamic force and moment coefficients under specific flight conditions. The force and moment coefficients in the MAV aerodatabase are determined using the FUN3D computational fluid dynamics solver. Firstly, an overview of the aerodatabase is presented to demonstrate its applicability to trajectory-defined simulations. This effort is followed by an initial attempt to quantify uncertainties in the force and moment coefficients necessary for updating the current aerodatabase. The uncertainty model identifies uncertainty adders and multipliers for coefficient-based forces and moments through a direct comparison between FUN3D and wind tunnel test data from NASA Marshall Space Center's 14x14 inch Trisonic Wind Tunnel. These uncertainties aim to encompass various changes in Mach number, angle of attack, and aerodynamic roll angle.

Uncertainty analysis↗

Uncertainty Quantification of Artemis I Space Launch System Integrated Aerodynamics Databases

Accurate prediction of integrated aerodynamic forces and moments is a necessary part of aerospace vehicle development. This accuracy can be quantified in the form of an uncertainty model, which makes the prediction more useful within an integrated vehicle design effort. Aerodynamic force and moment databases were constructed for the Artemis~I mission of the Space Launch System vehicle. These databases reconcile data from multiple sources to yield unified predictions of how NASA's most advanced launch vehicle interacts with Earth's atmosphere as it ascends into orbit. This paper outlines how the uncertainty quantification was performed for these databases to ensure comprehensive and tractable uncertainty source coverage.

Michael W Lee↗

Aerodynamic Design Optimization for Natural Laminar Flow Airfoils

Natural laminar flow technology is a passive laminar flow control (LFC) strategy that seeks to delay the onset of boundary-layer transition (BLT) through shape optimization to reduce the drag of the aerodynamic vehicle. Adjoint-based design optimization for LFC is proposed in an integrated multidisciplinary framework, which includes the computational fluid dynamics (CFD), geometry and grid deformation, and linear stability analysis (LSA) for transition prediction. In particular, the BLT location is predicted using the dual N-factor method that is based on a linear stability theory (LST) eigenvalue problem. The dual N-factor criterion accounts for the amplification of planar Tollmien-Schlichting (TS) and stationary crossflow (CF) boundary-layer instabilities to predict the transition location in three-dimensional boundary-layer flows. The adjoint-based shape optimization procedure is based on an iteratively coupled CFD and LSA methodology to converge the transition location and flow solutions, as well as to calculate the sensitivities of the aerodynamic metrics of interest with respect to the flow and shape design parameters. The RAE 2822 airfoil at 0 and 30 degrees yaw angles, an angle of attack of 0.72 degrees, and subsonic conditions (M∞ = 0.19, Rec = 5.6 × 106 ) are used as baseline configurations for design optimization. The angle of attack and the vertical displacement of free-form-deformation control points are used as design variables to reduce the drag coefficient while reaching a specified lift coefficient. The optimized unswept airfoil designs achieve a 30% drag reduction accompanied by a downstream shift of the transition locations over both suction and pressure sides of the airfoil. The initial design iterations for the swept case also show a favorable trend in the drag reduction with transition delay over both sides.

Transition↗

Towards Aerodynamic Shape Optimization Using an Immersed Boundary Overset Grid Method

Traditional Reynolds-averaged Navier-Stokes grid methods applied to aerodynamic shapeoptimization can struggle with the deformation of surface and volume grids at componentintersections, such as at wing-fuselage junctions. To overcome this, we propose an approachwhich utilizes curvilinear overset grids for the discretization of the domain, with the presenceof the body modeled using an immersed boundary method. This approach handles complexgeometries without the need for their explicit integration into the grid. The goal of this approachis to reduce grid generation time and allow for greater geometric freedom for component-basedaerodynamic shape optimization. Two different methods are presented: a source-term-basedand a ghost-node-based immersed boundary method. Flow analyses and adjoint solutionsobtained using the proposed methods show promising comparisons with standard body-fittedgrid methods. Preliminary aerodynamic shape optimization results obtained using one of theimmersed boundary methods are also presented.

TTT↗

Unsteady Aerodynamic Modeling of Atmospheric Entry Vehicles in Subsonic and Incompressible flow: A Frequency Response Approach

The determination of time-varying lift force and pitch moment generated by a purely pitching Earth-entry capsule is investigated. Experiments were conducted in the 12-foot Low-Speed Tunnel at NASA Langley Research Center, testing a range of oscillation frequencies at a zero-mean angle of attack with a pitching amplitude of 10 degrees. In light of these measurements, a closed-form set of analytically derived equations for lift and moment was used to develop a semi-empirical formulation, incorporating empirically determined values from the experimental runs. The equations are grounded in potential flow theory, Theodorsen's classical theory of unsteady aerodynamics, and the Joukowski theorem of conformal mapping. The unsteady aerodynamics generated by the oscillating body are then modeled by constructing frequency response functions, with quasi-steady forces and moments serving as inputs and unsteady forces and moments as outputs. The experimentally determined gain and phase variations characterize the unsteady nature of the flow and the system's response and flow time-lag to input flow parameters for a blunt-body entry vehicle. The final semi-empirical model is validated with a set of parameters beyond the initial test matrix.

Entry Systems Modeling↗

Unsteady Aerodynamic Modeling of Atmospheric Entry Vehicles in Subsonic and Incompressible Flow: A Frequency Response Approach

The determination of time-varying lift force and pitch moment generated by a purely pitching Earth-entry capsule is investigated. Experiments were conducted in the 12-foot Low-Speed Tunnel at NASA Langley Research Center, testing a range of oscillation frequencies at a zero-mean angle of attack with a pitching amplitude of 10 degrees. In light of these measurements, a closed-form set of analytically derived equations for lift and moment was used to develop a semi-empirical formulation, incorporating empirically determined values from the experimental runs. The equations are grounded in potential flow theory, Theodorsen's classical theory of unsteady aerodynamics, and the Joukowski theorem of conformal mapping. The unsteady aerodynamics generated by the oscillating body are then modeled by constructing frequency response functions, with quasi-steady forces and moments serving as inputs and unsteady forces and moments as outputs. The experimentally determined gain and phase variations characterize the unsteady nature of the flow and the system's response and flow time-lag to input flow parameters for a blunt-body entry vehicle. The final semi-empirical model is validated with a set of parameters beyond the initial test matrix.

Entry Systems Modeling↗

Computerized method and system for designing an aerodynamic focusing lens stack

A computerized method and system for designing an aerodynamic focusing lens stack, using input from a designer related to, for example, particle size range to be considered, characteristics of the gas to be flowed through the system, the upstream temperature and pressure at the top of a first focusing lens, the flow rate through the aerodynamic focusing lens stack equivalent at atmosphere pressure; and a Stokes number range. Based on the design parameters, the method and system determines the total number of focusing lenses and their respective orifice diameters required to focus the particle size range to be considered, by first calculating for the orifice diameter of the first focusing lens in the Stokes formula, and then using that value to determine, in iterative fashion, intermediate flow values which are themselves used to determine the orifice diameters of each succeeding focusing lens in the stack design, with the results being output to a designer. In addition, the Reynolds numbers associated with each focusing lens as well as exit nozzle size may also be determined to enhance the stack design.

47 OTHER INSTRUMENTATION↗

Aerodynamic seal assemblies for turbo-machinery

The present application provides an aerodynamic seal assembly for use with a turbo-machine. The aerodynamic seal assembly may include a number of springs, a shoe connected to the springs, and a secondary seal positioned about the springs and the shoe.

42 ENGINEERING↗