Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “train”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

A Preliminary Study of Solar Powered Aircraft and Associated Power Trains

The feasibility of regeneratively powered solar high altitude powered platform (HAPP) remotely piloted vehicles was assessed. Those technologies which must be pursued to make long duration solar HAPPs feasible are recommended. A methodology which involved characterization and parametric analysis of roughly two dozen variables to determine vehicles capable of fulfilling the primary mission are defined. One of these vehicles was then conceptually designed. Variations of each major design parameter were investigated along with state-of-the-art changes in power train component capabilities. The midlatitude mission studied would be attainable by a solar HAPP if fuel cell, electrolyzer and photovoltaic technologies are pursued. Vehicles will be very large and have very lightweight structures in order to attain the combinations of altitude and duration required by the primary mission.

Hall, D. W.↗
NASA NTRS1984

Space Shuttle inflatable training articles

The design, development, construction, and testing of the Long Duration Exposure Facility inflatable and the space telescope training articles are discussed. While these articles are of similar nature, materials, and construction, they vary in size and present different problems with regards to size, shape, gross/net lift, and balance.

West, M. L.↗
NASA NTRS1984

Evaluation of the HARDMAN comparability methodology for manpower, personnel and training

The methodology evaluation and recommendation are part of an effort to improve Hardware versus Manpower (HARDMAN) methodology for projecting manpower, personnel, and training (MPT) to support new acquisition. Several different validity tests are employed to evaluate the methodology. The methodology conforms fairly well with both the MPT user needs and other accepted manpower modeling techniques. Audits of three completed HARDMAN applications reveal only a small number of potential problem areas compared to the total number of issues investigated. The reliability study results conform well with the problem areas uncovered through the audits. The results of the accuracy studies suggest that the manpower life-cycle cost component is only marginally sensitive to changes in other related cost variables. Even with some minor problems, the methodology seem sound and has good near term utility to the Army. Recommendations are provided to firm up the problem areas revealed through the evaluation.

Zimmerman, W.↗
NASA NTRS1984

Summary of drive-train component technology in helicopters

A review of current helicopters was conducted to determine the technology in the drive-train systems. The design features are highlighted including reliability characteristics in transmission systems for the OH-58, UH-1, CH-47, and UH-60 helicopters. In addition, trade-offs involving cost, reliability and life are discussed.

Weden, G. J.↗
NASA NTRS1984

Payload crew training complex simulation engineer's handbook

The Simulation Engineer's Handbook is a guide for new engineers assigned to Experiment Simulation and a reference for engineers previously assigned. The experiment simulation process, development of experiment simulator requirements, development of experiment simulator hardware and software, and the verification of experiment simulators are discussed. The training required for experiment simulation is extensive and is only referenced in the handbook.

Shipman, D. L.↗
NASA NTRS1984

Captain Development Training at US Air

The flight training program practiced at US Air is reviewed. The background and development of the program are discussed. Specific program activities and curricula are considered. The issue of educating pilots to be aware of and admit significant flight stress and stress in their personal lives is addressed.

Fickes, S.↗
NASA NTRS1984

Video concepts in CRM training

Cockpit resource management (CRM) is discussed in the context of programs developed by Pennsylvania Airlines and Ransome Airlines. Video techniques in flight training are emphasized. Problems in cockpit interpersonal communication are addressed.

Yocum, M.↗
NASA NTRS1984

Communications skills for CRM training

A pilot training program in communication skills, listening, conflict solving, and task orientation, for a small but growing commuter airline is discussed. The interactions between pilots and management, and communication among crew members are examined. Methods for improvement of cockpit behavior management personnel relations are investigated.

Shearer, M.↗
NASA NTRS1984

Initiative uses of aircraft for flight training

The use of the aircraft rather than a flight simulator as a training device is investigated. Particular attention is paid to the application of LOFT concepts to the aircraft in its home environment.

Sele, M.↗
NASA NTRS1984

A system-level mathematical model for evaluation of power train performance of load-leveled electric-vehicles

The power train performance of load leveled electric vehicles can be compared with that of nonload leveled systems by use of a simple mathematical model. This method of measurement involves a number of parameters including the degree of load leveling and regeneration, the flywheel mechanical to electrical energy fraction, and efficiencies of the motor, generator, flywheel, and transmission. Basic efficiency terms are defined and representative comparisons of a variety of systems are presented. Results of the study indicate that mechanical transfer of energy into and out of the flywheel is more advantageous than electrical transfer. An optimum degree of load leveling may be achieved in terms of the driving cycle, battery characteristics, mode of mechanization, and the efficiency of the components. For state of the art mechanically coupled flyheel systems, load leveling losses can be held to a reasonable 10%; electrically coupled systems can have losses that are up to six times larger. Propulsion system efficiencies for mechanically coupled flywheel systems are predicted to be approximately the 60% achieved on conventional nonload leveled systems.

Purohit, G. P.↗
NASA NTRS1985

Otolith tilt-translation reinterpretation following prolonged weightlessness - Implications for preflight training

Observations with three astronauts yielded two major findings. First, perceived self-motion during sinusoidal roll differed immediately postflight from preflight. Between 70 and 150 min after landing, roll was perceived primarily as linear translation. Secondly, more horizontal eye movement was elicited by roll simulation immediately postflight relative to both preflight and later postflight observations. These results support an 'otolith tilt-translation reinterpretation' hypothesis, which has clear implications for understanding astronaut reports of space motion sickness during the early period of orbital flight. A proposal for 'prophylactic adaptation training' which may provide preflight adaptation to weightlessness, derives from this reearch.

Parker, D. E.↗
NASA NTRS1985

Space motion sickness preflight adaptation training Preliminary studies with prototype trainers

Based on the otolith tilt-translation reinterpretation hypothesis (Parker et al., 1985), preflight adaptation procedures and several preflight adaptation trainers (PATs) have been developed. Two PAT prototypes, the Miami University Seesaw (MUS) and the Dynamic Environmental Simulator (DES), include a physical room that is moved relative to the restrained subject. Results from the MUS and DES PAT experiments indicate that exposure to the produced sensory rearrangement can change eye movement reflexes. The changes persisted for a period longer than the training exposure period, indicating similarity with the eye-movement reflexes observed immediately postflight in weightlessness-adapted astronauts. It is concluded that the apparatus and procedures to preadapt astronauts to the sensory rearrangement of weightless space flight can be developed on the basis of the reported PATs and procedures. The third PAT prototype tested, which employs a computer-generated scene, failed to produce changes similar to those recorded in the MUS and DES experiments.

Parker, D. E.↗
NASA NTRS1986

Measurement of angular distribution of sound emission from training projectiles in subsonic flight

Training projectiles with nose ring cavities that produce intense whistles in stationary free-jet tests were shot in a relatively straight-line trajectory. A ground based microphone was used to obtain the angular distribution of sound intensity produced from the subsonically flying projectile. Data reduction required calculation of Doppler and attenuation factors which were determined based on a non-linear trajectory. Also, the directional sensitivity of the microphone was measured and used in the data reduction. Significant angular variation of sound intensity produced from the projectile was found which can be used to plot an intensity contour map on the ground. A full-scale field test confirmed the validity of the aeroacoustic concept of producing a relatively intense whistle from the projectile, and the usefulness of a real-time data acquisition system.

Cho, Y. I.↗
NASA NTRS1986

Design and dynamic simulation of a fixed pitch 56 kW wind turbine drive train with a continuously variable transmission

The dynamic analysis of a horizontal axis fixed pitch wind turbine generator (WTG) rated at 56 kW is discussed. A mechanical Continuously Variable Transmission (CVT) was incorporated in the drive train to provide variable speed operation capability. One goal of the dynamic analysis was to determine if variable speed operation, by means of a mechanical CVT, is capable of capturing the transient power in the WTG/wind environment. Another goal was to determine the extent of power regulation possible with CVT operation.

Gallo, C.↗
NASA NTRS1987

Development of a CCTV system for welder training and monitoring of Space Shuttle Main Engine welds

A Weld Operator's Remote Monitoring System (WORMS) for remote viewing of manual and automatic GTA welds has been developed for use in Space Shuttle Main Engine (SSME) manufacturing. This system utilizes fiberoptics to transmit images from a receiving lens to a small closed-circuit television (CCTV) camera. The camera converts the image to an electronic signal, which is sent to a videotape recorder (VTR) and a monitor. The overall intent of this system is to provide a clearer, more detailed view of welds than is available by direct observation. This system has six primary areas of application: (1) welder training; (2) viewing of joint penetration; (3) viewing visually inaccessible welds; (4) quality control and quality assurance; (5) remote joint tracking and adjustment of variables in machine welds; and (6) welding research and development. This paper describes WORMS and how it applies to each application listed.

Gordon, S. S.↗