SEARCH · Engineering Papers

Results for “surface characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Remote sensing x ray fluorescence spectrometry for future lunar exploration missions

Measurement of discrete line X-ray emission from space can be used to obtain both qualitative and quantitative elemental surface composition information. Remote orbital X-ray elemental analysis is the measurement of characteristic X-rays following the interaction of solar X-rays with the surface of a given solid body. Thus, X-ray emission from a surface is strongly dependent on the incident solar spectrum as well as on the chemical composition of the surface. In this paper, the relationship between the solar flux and the major lunar element fluorescence and scattered X-ray flux is characterized. A model was developed to calculate lunar surface X-ray fluorescence emission spectra under a variety of solar conditions and, in particular, conditions that might be expected for a Lunar Scout mission proposed for 1995 or 1996. This time period should be during solar minimum.

Clark, Pamela E.↗

NASA NTRS2021

Retrieving the global distribution of the threshold of wind erosion from satellite data and implementing it into the Geophysical Fluid Dynamics Laboratory land–atmosphere model (GFDL AM4.0/LM4.0)

Dust emission is initiated when surface wind velocities exceed the threshold of wind erosion. Many dust models used constant threshold values globally. Here we use satellite products to characterize the frequency of dust events and land surface properties. By matching this frequency derived from Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue aerosol products with surface winds, we are able to retrieve a climatological monthly global distribution of the wind erosion threshold (V(threshold)) over dry and sparsely vegetated surfaces. This monthly two-dimensional threshold velocity is then implemented into the Geophysical Fluid Dynamics Laboratory coupled land–atmosphere model (AM4.0/LM4.0). It is found that the climatology of dust optical depth (DOD) and total aerosol optical depth, surface PM10 dust concentrations, and the seasonal cycle of DOD are better captured over the “dust belt” (i.e., northern Africa and the Middle East) by simulations with the new wind erosion threshold than those using the default globally constant threshold. The most significant improvement is the frequency distribution of dust events, which is generally ignored in model evaluation. By using monthly rather than annual mean V(threshold), all comparisons with observations are further improved. The monthly global threshold of wind erosion can be retrieved under different spatial resolutions to match the resolution of dust models and thus can help improve the simulations of dust climatology and seasonal cycles as well as dust forecasting.

Bing Pu↗

DOE OSTI2023

Fundamental Superconductivity of Nb films for Quantum Computing Application

Niobium is a widely accepted material for quantum computing device as well as superconducting radio frequency (SRF) technology. Superconducting niobium is a marginal type II superconductor which has a very narrow gap (~20-30 mT) of the mixed state at 2K, even showing the intermediate state (IMS) at the early stage of magnetic vortex penetration. Tremendous progress has been made in understanding the impact of the Nb surface and bulk superconductivities on SRF resonator performance. However, the effect of thin superconducting Nb films for quantum computing applications requires further examination. In this study, we explore the fundamental superconducting properties of various thin Nb films and compare them with respect to the energy relaxation time, T1, measured from superconducting qubit fabricated with these films. The Nb films are fabricated both with or without a surface protective layer that prevents the formation of lossy Nb2O5. Electromagnetic properties are characterized by means of bulk magnetization, electromagnetic transport, and dynamics of surface superconductivity. In addition, analytical electron microscopy is implemented to further connect the superconducting properties to microstructure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS2010

Copoly(imide siloxane) Abhesive Materials with Varied Siloxane Oligomer Length

In this work, low surface energy copoly(imide siloxane)s were synthesized with various siloxane segment lengths. Characterization of these materials revealed that domain formation of the low surface energy component within the matrix was more prevalent for longer siloxane segments as indicated by increased opacity, decreased mechanical properties, and variation of the Tg. Incorporation of siloxanes lowered the polymer s surface energy as indicated by water contact angle values. Topographical modification of these materials by laser ablation patterning further reduced the surface energy, even generating superhydrophobic surfaces. Combined, the contact angle data and particle adhesion testing indicated that copoly(imide siloxane) materials may provide greater mitigation to particulate adhesion than polyimide materials alone. These enhanced surface properties for abhesive applications did result in a reduction of the tensile moduli of the copolymers. It is possible that lower siloxane loading levels would result in retention of the mechanical properties of the polyimide while still affording abhesive surface properties. This hypothesis is currently being investigated. Laser ablation patterning offers further reduction in particle retention as the available surface area for particle adhesion is reduced. Pattern variation and size dependencies are currently being evaluated. For the purposes of lunar dust adhesion mitigation, it is likely that this approach, termed passive due to the lack of input from an external energy source, would not be sufficient to mitigate surface contamination or clean contaminated surfaces for some lunar applications. It is feasible to combine these materials with active mitigation strategies - methods that utilize input from external energy sources - would broaden the applicability of such materials for abhesive purposes. Collaborative efforts along these lines have been initiated with researchers at NASA Kennedy Space Center where experiments are being conducted involving a series of embedded electrodes within polymeric matrices.

Wohl, Christoper J.↗

DOE OSTI2023

Fundamental Superconductivity of Nb films for Quantum Computing Application

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1997

Analysis of Texture Using the Fractal Model

Properties such as the fractal dimension (FD) can be used for feature extraction and classification of regions within an image. The FD measures the degree of roughness of a surface, so this number is used to characterize a particular region, in order to differentiate it from another. There are two basic approaches discussed in the literature to measure FD: the blanket method, and the box counting method. Both attempt to measure FD by estimating the change in surface area with respect to the change in resolution. We tested both methods but box counting resulted computationally faster and gave better results. Differential Box Counting (DBC) was used to segment a collage containing three textures. The FD is independent of directionality and brightness so five features were used derived from the original image to account for directionality and gray level biases. FD can not be measured on a point, so we use a window that slides across the image giving values of FD to the pixel on the center of the window. Windowing blurs the boundaries of adjacent classes, so an edge-preserving, feature-smoothing algorithm is used to improve classification within segments and to make the boundaries sharper. Segmentation using DBC was 90.8910 accurate.

Navas, William↗

NASA NTRS2014

Exploring the Utility of the Planned CYGNSS Mission for Investigating the Initiation and Development of the Madden-Julian Oscillation

CYGNSS is a planned constellation consisting of multiple micro-satellites that leverage the Global Positioning System (GPS) to provide rapidly updated, high resolution (approx. 15-50 km, approx. 4 h) surface wind speeds (via bi-static scatterometry) over the tropical oceans in any weather condition, including heavy rainfall. The approach of the work to be presented at this conference is to utilize a limited-domain, cloud-system resolving model (Weather Research and Forecasting or WRF) and its attendant data assimilation scheme (Three-Dimensional Variational Assimilation or 3DVAR) to investigate the utility of the CYGNSS mission for helping characterize key convectiveto- mesoscale processes - such as surface evaporation, moisture advection and convergence, and upscale development of precipitation systems - that help drive the initiation and development of the Madden-Julian Oscillation (MJO) in the equatorial Indian Ocean. The proposed work will focus on three scientific objectives. Objective 1 is to produce a high-resolution surface wind dataset resolution (approx. 0.5 h, approx. 1-4 km) for multiple MJO onsets using WRF-assimilated winds and other data from the DYNAmics of the MJO (DYNAMO) field campaign, which took place during October 2011 - March 2012. Objective 2 is to study the variability of surface winds during MJO onsets at temporal and spatial scales of finer resolution than future CYGNSS data. The goal is to understand how sub-CYGNSS-resolution processes will shape the observations made by the satellite constellation. Objective 3 is to ingest simulated CYGNSS data into the WRF model in order to perform observing system simulation experiments (OSSEs). These will be used to test and quantify the potential beneficial effects provided by CYGNSS, particularly for characterizing the physical processes driving convective organization and upscale development during the initiation and development of the MJO. The proposed research is ideal for answering important questions about the CYGNSS mission, such as the representativeness of surface wind retrievals in the context of the complex airflow processes that occur during heavy precipitation, as well as the tradeoffs in retrieval accuracy that result from finer spatial resolution of the CYGNSS winds versus increased errors/noisiness in those data. Research plans and initial progress toward these objectives will be presented.

Lang, Timothy↗

DOE OSTI2022

Controls and process planning strategies for 5-axis laser directed energy deposition of Ti-6Al-4V using an 8-axis industrial robot and rotary motion

Interest in multi-axis additive manufacturing has grown significantly in recent years due to associated benefits that range from improved quality to support for greater geometric complexity. A method of 5-axis Laser Hot-Wire Directed Energy Deposition is developed and demonstrated in this study using an 8-axis industrial robot, comprised of a 6-axis serial link robot and a 2 degree-of-freedom positioner. Coordinated 5-axis motion is used to print Ti-6Al-4V objects predominantly through build plate rotation. Methods of slicing and toolpath generation are presented, including the use of an alternating toolpath direction philosophy and the manipulation of the CAD model surface normal vectors for determining the required build plate tilt angles for maintaining consistent deposition orientations relative to gravity. Another objective of the study was to determine the limits of conventional slicing and layer height control techniques for printing geometries with significant unsupported overhangs. A comparison is made between the behavior of normal and conformal bead alignment in this regard, and the performance of the layer height controller is reported as it relates to process stability and the limits of printing overhang geometries. Unsupported overhangs were successfully printed at 35° without build plate tilt and 45° with build plate tilt. Toolpath velocity and net-shape printing performance are reported as well, with 3D scans of the printed surfaces used for net-shape characterization. In all, the printing of three geometries is presented, including the overhang geometry, a 5-axis toolpath geometry, and a large-scale, multi-bead demonstrator part, which exceeded 500 mm in height and weighed 44 kg (97 lbs).

36 MATERIALS SCIENCE↗

DOE OSTI2025

In-service corrosion and grain boundary oxidation in neutron-irradiated 316 stainless steel baffle-former bolts

Reactor core internal components such as baffle-former bolts (BFBs) are subjected to significant mechanical stress, corrosive environment, and neutron irradiation from the reactor core during the plant operation. Over the long operation period, these conditions lead to potential degradation and of the bolts. In this work, characterization was performed on the oxidized surface of stainless steel BFBs harvested from a commercial pressurized water reactor (PWR) after 40 years of operation. The analysis shows that a complex multilayered surface oxide with six identified layers formed that is different from 2-layer structure commonly observed in model experiments. The oxide varies by composition – predominantly Fe, Cr, and Ni, grain size, and phase, and has features resembling both unirradiated and radiation/ corrosion experiments likely due to the low radiation flux compared to ion-irradiation or the test reactor radiation. In addition, grain boundary oxidative attack featured a pathway for Fe and other elements to move from the metal matrix to the outermost oxide. In conclusion, the results help assess PWR lifetime extension, put into context previous experimental studies, and provide input for designing experiments combining radiation and corrosion effects.

Baffle-former bolt↗

DOE OSTI2026

Comparative Dissolution of Iron-Bearing Minerals by Catecholate and Hydroxamate Siderophores under Oxic and Anoxic Conditions

Siderophores play a crucial role in biological iron (Fe) acquisition and mobilization by promoting Fe mineral and rock weathering. While the effects of the hydroxamate siderophore desferrioxamine B (DFOB) have been extensively studied, the role of catecholates in the dissolution of Fe mineral and rock under varying redox conditions remain limited. Moreover, despite Fe being one of the most redox-active metals, the siderophore-mediated redox transformations of solid-phase Fe and their impact on mineral dissolution are not well understood. Herein, this study systematically investigated dissolution behavior of both Fe(II) and Fe(III)-bearing minerals and rocks (Fe(II)- bearing basalt and olivine, and Fe(III)- bearing nontronite and goethite), by two structurally distinct biological siderophores, catecholate protochelin and hydroxamate DFOB, under both oxic and anoxic conditions. Batch experiments quantified Fe and transition metals (Mn, Ni, Zn, Mo) released from the tested minerals in the presence of siderophores. Throughout the dissolution experiments, siderophore concentrations and Fe-siderophore complexation in solutions were measured using UV-vis spectrometry. Fe redox changes under oxic and anoxic conditions by siderophores were determined, and mineral surface alterations following siderophore treatments were characterized through scanning electron microscopy (SEM) and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). Results revealed distinct interplays of dissolution mechanisms, including ligand-exchange promoted dissolution and reductive dissolution, along with Fe(III) reduction and Fe(II) oxidation, contributing to the Fe(II)- and Fe(III)-rich mineral weathering under varying redox conditions. Under oxic conditions, both protochelin and DFOB enhanced Fe release from Fe(II)-rich basalt and olivine more effectively than from Fe(III)-rich minerals. DFOB induced greater Fe(II)-mineral dissolution than protochelin. This difference was attributed to a higher level of Fe(II) oxidation by DFOB in contrast to protochelin, as well as the protochelin oxidation with the loss of Fe binding groups (catechols). Under anoxic conditions, both siderophores significantly reduced Fe(III) in nontronite and goethite, with protochelin demonstrating substantially stronger Fe(III) reduction capacity than DFOB. However, Fe(III) reduction negatively impacted Fe release from Fe(III)-rich minerals. Instead, Fe release from Fe(II)-rich minerals was enhanced under anoxic conditions due to the absence of Fe(II) oxidation and labile Fe(II). Variations in siderophore adsorption also contributed to dissolution differences. Beyond iron, the release of transition metals from tested minerals was influenced by elemental contents, mineral compositions, and siderophore types, revealing distinct metal- and siderophore-dependent patterns. This systematic investigation highlights the roles of siderophores in Fe redox cycling and metal mobilization, enhancing our understanding of different siderophore behaviors in siderophore-mediated microbial metal acquisition within redox-dynamic environments, with implications for bioleaching industries and applications in agriculture and climate change mitigation.

Guo, Dongyi↗

DOE OSTI2022

Functional properties of Yttrium Iron Garnett thin films on graphene-coated Gd 3 Ga 5 O 12 for remote epitaxial transfer

Remote epitaxial growth via a graphene interlayer and subsequent mechanical exfoliation of a free-standing membrane is a recently developed technique used to transfer complex oxide thin films onto non-native substrates to form heterogeneously integrated structures for various device applications. One such oxide is Yttrium Iron Garnet (YIG), a material of choice for a wide range of magnetoelectric and spintronic devices owing to its strong magnetic properties and low microwave losses. YIG is predominantly grown on lattice matched Gadolinium Gallium Garnet (GGG) substrates, but by utilizing the remote epitaxy technique, high quality YIG films can be transferred from GGG onto another substrate such as piezoelectric Lithium Niobate (LN). Mechanical strain coupling between the layers and magnetostrictive nature of YIG would allow for the investigation of the interplay in YIG/LN structures leading to the design of novel frequency agile magneto-acoustic devices. In this study functional properties of a YIG film grown using PLD on graphene-coated GGG substrate were investigated and compared to traditional YIG on GGG. Both materials were characterized in terms of crystal structure, surface morphology, FMR and Gilbert damping, and Raman and XAS spectroscopy. Further, it was found that YIG on graphene-coated GGG exhibits significantly higher microwave losses than standard YIG on GGG (FMR linewidth 30.9 vs 2.1 Oe at 10 GHz, and Gilbert damping coefficient 15.4x10 -4 vs 3.4x10 -4 respectively), which was attributed to increased concentration of Fe 2+ cations in YIG/Graphene/GGG. While the damping is higher in these studied films compared to YIG grown directly on GGG, the resulting properties are still very favorable compared to many other competing materials which can be grown without the need for lattice matched substrates, such as metallic ferromagnets.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Current Status and Future Directions of All-Solid-State Batteries with Lithium Metal Anodes, Sulfide Electrolytes, and Layered Ternary Oxide Cathodes

All-solid-state batteries (ASSBs) offer great promise as a next-generation energy storage technology with higher energy density, wider operating temperature range, and improved safety for electric vehicles. ASSBs employing lithium metal anodes (Li), sulfide-based solid-state electrolytes (SSE), and Ni-rich layered transition metal oxide cathodes (LiMO 2 , M = Ni, Mn, Co, Al) are particularly promising due to its superior electrochemical performance compared to other solid-electrolyte systems. However, the battery cycle life at high cathode mass loading and high current is still limited because the failure mechanism is not fully understood. Lithium dendrite growth at the anode or inside a solid electrolyte still represents as a serious risk of cell failure. Interfacial resistance increases attributed to electrolyte decomposition and interfacial void formation at both cathode–electrolyte and anode–electrolyte interfaces lead to gradual capacity fading. In this Review, we present the fundamental challenges and recent scientific understandings of each component in ASSBs. The novel diagnostic tools for these components, especially the interfaces buried under the surface that are often hard for characterization are mainly examined. Lastly, we offer a perspective for future research directions. We hope this Review will provide a timely snapshot of state-of-the-art research progress in ASSBs to accelerate the development of ASSBs.

25 ENERGY STORAGE↗

DOE OSTI2025

Modular Assembly of FTO|Chromophore-Catalyst Hierarchical Films Based on Strong Dipole Interactions

Here, we have designed and characterized modular self-assembled hierarchical films containing a molecular catalyst tethered to an anchoring molecule by means of dipole-induced dipole interactions. In order to do so, two new Co III -based molecular catalyst candidates were designed, namely, [Co III L 1 (pyrr) 2 ]ClO 4 (Co1) and [Co III L 2 (pyrr) 2 ]ClO 4 (Co2), where L 1 and L 2 are the respective deprotonated forms of N,N′-[4,5-bis(dodecyloxy)-1,2-phenylene]dipicolinamide and N,N′-[4,5-bis(methoxyethoxy)-1,2-phenylene]dipicolinamide and were characterized by electrochemical, electronic, and film formation properties. Species Co1 and Co2 were deposited onto an anchor molecule such as octylphosphonic acid (OPA) or the chromophoric [Ru II (bpy PO3H ) 2 (bpy C7 )]Cl 2 (Ru) previously attached onto conductive fluorine-doped tin oxide (FTO). Four hierarchical films of the form substrate|anchor-catalyst were obtained, namely, FTO|OPA-Co1, FTO|OPA-Co2, FTO|Ru-Co1, and FTO|Ru-Co2, and the role of dipole-dipole interactions between anchor and catalyst modules was assessed. These newly synthesized hierarchical films were characterized by a host of surface-specific methods that include X-ray photoelectron spectroscopy, ellipsometry, X-ray fluorescence, and water contact angle, thus enabling an unprecedented level of analysis. Compared to the weak C-H van der Waals interactions exhibited by Co1, the presence of alkoxy chains in Co2 ensures stronger dipole-dipole interactions with the alkyl chain of the anchors due to O···H formation. The persistence of their redox properties, which include metal oxidation, and directionality of electron transport were probed suggesting direct relevance to catalytic processes such as water oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Three-Electrode Study of Electrochemical Ionomer Degradation Relevant to Anion-Exchange-Membrane Water Electrolyzers

Among existing water electrolysis (WE) technologies, anion-exchange-membrane water electrolyzers (AEMWEs) show promise for low-cost operation enabled by the basic solid-polymer electrolyte used to conduct hydroxide ions. The basic environment within the electrolyzer, in principle, allows the use of non-platinum-group metal catalysts and less-expensive cell components compared to acidic-membrane systems. Nevertheless, AEMWEs are still underdeveloped, and the degradation and failure modes are not well understood. To improve performance and durability, supporting electrolytes such as KOH and K 2 CO 3 are often added to the water feed. The effect of the anion interactions with the ionomer membrane (particularly other than OH – ), however, remains poorly understood. We studied three commercial anion-exchange ionomers (Aemion, Sustainion, and PiperION) during oxygen evolution (OER) at oxidizing potentials in several supporting electrolytes and characterized their chemical stability with surface-sensitive techniques. We analyzed factors including the ionomer conductivity, redox potential, and pH tolerance to determine what governs ionomer stability during OER. Specifically, we discovered that the oxidation of Aemion at the electrode surface is favored in the presence of CO 3 2– /HCO 3 – anions perhaps due to the poor conductivity of that ionomer in the carbonate/bicarbonate form. Sustainion tends to lose its charge-carrying groups as a result of electrochemical degradation favored in basic electrolytes. PiperION seems to be similarly negatively affected by a pH drop and low carbonate/bicarbonate conductivity under the applied oxidizing potential. Furthermore, the insight into the interactions of the supporting electrolyte anions with the ionomer/membrane helps shed light on some of the degradation pathways possible inside of the AEMWE and enables the informed design of materials for water electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

CMPO-Functionalized Silica Sorbents for pH-Tunable Separation and Enrichment of Rare-Earth Elements from Environmental Matrices

Rare-earth elements (REEs) are crucial in many applications, yet mutual separation is challenging due to their similar chemical behavior. Octylphenyl- N,N-diisobutyl carbamoyl methyl phosphine oxide (CMPO) is an organophosphorus ligand originally developed for extracting actinides and lanthanides from spent nuclear fuel. Here, we report a pH-tunable CMPOfunctionalized silica sorbent for selective REE separation from complex aqueous matrices. A CMPO-associated silica gel sorbent was synthesized and characterized by Brunauer−Emmett−Teller (BET) surface area, scanning electron microscopy, and X-ray photoelectron spectroscopy to confirm the surface functionalization and binding behavior. Sorbent performance was evaluated by using a synthetic 46- element solution and a real phosphate rock fertilizer leachate. Notably, REEs were successfully eluted with ultrapure water, demonstrating reversible desorption controlled by pH adjustment. Packed-bed column studies increased the REE mass fraction from 3.6% to 64% (20-fold enrichment), with up to 30-fold enrichment of neodymium. The adsorption process follows the Langmuir isotherm behavior and follows pseudo-second-order kinetics. The uptake capacity of 1 μmol of REEs per 4.2 μmol of CMPO supports the formation of a predominantly 4:1 ligand:rare earth element(III) pseudocomplex. These results demonstrate CMPO-functionalized silica as a selective, water-elutable, and low-chemical-input platform for sustainable REE recovery from environmental and industrial sources.

chelating ligands↗

DOE OSTI2025

Observation of the spiral spin liquid in a triangular-lattice material

The spiral spin liquid (SSL) is a highly degenerate state characterized by a continuous contour or surface in reciprocal space spanned by a spiral propagation vector. Although the SSL state has been predicted in a number of various theoretical models, very few materials are so far experimentally identified to host such a state. Via combined single-crystal wide-angle and small-angle neutron scattering, we report observation of the SSL in the quasi-two-dimensional delafossite-like AgCrSe 2 . We show that it is a very close realization of the ideal Heisenberg J 1 –J 2 –J 3 frustrated model on the triangular lattice. By supplementing our experimental results with microscopic spin-dynamics simulations, we demonstrate how such exotic magnetic states are driven by thermal fluctuations and exchange frustration.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Synthesis and characterization of low-nuclearity lantern-type porous coordination cages

Abstract not provided

Taggart, Garrett A.↗

DOE OSTI2022

Experimental-based mechanistic study and optimization of hydrothermal liquefaction of anaerobic digestates

Valorization of agricultural and food waste digestates is crucial for sustainable waste management to reduce environmental impacts and improve the economics of commercial farms. Hydrothermal liquefaction (HTL) of anaerobic digestates was evaluated to recover resources by converting them into carbon-dense biocrude oil and a nutrient-rich HTL aqueous phase (HTL-AP) coproduct. The effects of HTL temperature (280–360 °C), reaction time (10–50 min), feedstock pH (2.5–8.5), digestate salt content (1–5 wt%), and digestate cellulose-to-lignin ratio (0.2–1.8) on energy and nutrient recovery were systematically investigated in a set of well-designed experiments following a half-fractional central composite protocol. Response surface analysis combined with HTL product characterization and comparative literature study produced a comprehensive reaction pathway for HTL of anaerobic digestates. Moreover, this analysis revealed the importance of acidic feedstocks (pH 3.00–5.53), high reaction temperatures (337–360 °C), and reaction times <45 or 45–50 min for digestates with Cel/Lig >1 or <1, for maximizing the energy recovered in biocrude (high carbon yield and low heteroatom content) and the amounts of P, NH 3 –N, and Mg distributed in the HTL-AP. Acidic conditions catalyzed biocrude production, inhibited the Maillard reaction (lowering the nitrogen content in biocrude), and partitioned nutrients into the HTL-AP. Higher reaction temperatures coupled with longer reaction times activated hydro-denitrogenation and deoxygenation reactions to improve biocrude quality. Finally, this work provides not only validated methods to achieve targeted resource recovery for specific feedstock compositions using HTL, but also a comprehensive mechanistic understanding of the HTL of biomass waste for controlling target product characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗