Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Raman study of strained Ge{sub 1-x}Sn{sub x} alloys

The Ge-Ge longitudinal optical Raman peak has been measured in strained Ge{sub 1-x}Sn{sub x} alloy layers grown on top of relaxed In{sub y}Ga{sub 1-y}As buffer layers on GaAs substrates by molecular beam epitaxy. The experimental result shows that the peak frequency shift increases linearly from the value for bulk Ge with the Sn fraction x and the strain {epsilon}, {Delta}{omega} {omega}- {omega}{sub Ge} = ax + b{epsilon}. In these experiments alloy and strain contributions are decoupled and measured separately, and a and b are determined to be a = - 82 {+-} 4 cm{sup -1} and b = - 563 {+-} 34 cm{sup -1}, over the entire composition and strain range investigated.

36 MATERIALS SCIENCE↗

UV-Photoreflectance and Raman Characterization of Strain Relaxation in Si on Silicon-Germanium Films

Photoreflectance (PR), using a uv (374 nm) diode laser probe beam, and Raman spectroscopy, using a multi-wavelength Ar{sup +} laser coupled to a high-resolution multi-wavelength spectrometer, were used to characterize the strain relaxation of Si top layers grown on a graded and relaxed SiGe buffer stack with a final Ge concentration of 20%. The Si top layer thicknesses ranged from 1.6 to 18 nm. Considerable radial variation in the strain relaxation was seen in all sampled wafers, highlighting the need for rapid, local strain characterization. Strong correlation between shift in the Si layer dielectric response, measured by uv-PR, and the Si top layer strain, measured by Raman, is reported.

36 MATERIALS SCIENCE↗

Strain control of AlGaN/GaN high electron mobility transistor structures on silicon (111) by plasma assisted molecular beam epitaxy

This paper reports on the use of plasma assisted molecular beam epitaxy of AlGaN/GaN-based high electron mobility transistor structures grown on 4 in. Si (111) substrates. In situ measurements of wafer curvature during growth proved to be a very powerful method to analyze the buffer layer's thickness dependent strain. The Ga/N ratio at the beginning of growth of the GaN buffer layer is the critical parameter to control the compressive strain of the entire grown structure. An engineered amount of compressive strain must be designed into the structure to perfectly compensate for the tensile strain caused by differences in the thermal expansion coefficient between the epi-layer and substrate during sample cool down from growth temperatures. A maximum film thickness of 4.2 {mu}m was achieved without the formation of any cracks and a negligible bow of the wafers below 10 {mu}m. Measurement of the as-grown wafers revealed depth profiles of the charge carrier concentration comparable to values achieved on SiC substrates and mobility values of the two dimensional electron gas in the range 1230 to 1350 cm{sup 2}/Vs at a charge carrier concentration of 6.5-7 10{sup 12}/cm{sup 2}. First results on processed wafers with 2 {mu}m thick buffer layer indicate very promising results with a resistance of the buffer, measured on 200 {mu}m long contacts with 15 {mu}m pitch, in the range of R > 10{sup 9}{Omega} at 100 V and breakdown voltages up to 550 V.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scanning transmission electron microscopy strain measurement from millisecond frames of a direct electron charge coupled device

A high-speed direct electron detection system is introduced to the field of transmission electron microscopy and applied to strain measurements in semiconductor nanostructures. In particular, a focused electron probe with a diameter of 0.5 nm was scanned over a fourfold quantum layer stack with alternating compressive and tensile strain and diffracted discs have been recorded on a scintillator-free direct electron detector with a frame time of 1 ms. We show that the applied algorithms can accurately detect Bragg beam positions despite a significant point spread each 300 kV electron causes during detection on the scintillator-free camera. For millisecond exposures, we find that strain can be measured with a precision of 1.3 Multiplication-Sign 10{sup -3}, enabling, e.g., strain mapping in a 100 Multiplication-Sign 100 nm{sup 2} region with 0.5 nm resolution in 40 s.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Closely spaced SiGe barns as stressor structures for strain-enhancement in silicon

We present tensile and compressive strains realized within the same Si capping layer on an array of SiGe islands grown on pit-patterned (001) Si substrates. The strain distributions are obtained from synchrotron X-ray diffraction studies in combination with three-dimensional finite element calculations and simulations of the diffracted intensities. For barn-shaped islands grown at 720 Degree-Sign C with average Ge contents of 30%, the Si cap layer is misfit- and threading-dislocation free and exhibits compressive strains as high as 0.8% in positions between the islands and tensile strains of up to 1% on top of the islands.

36 MATERIALS SCIENCE↗

The relationship between depth-resolved composition and strain relaxation in InAlN and InGaN films grown by molecular beam epitaxy

A study of the relationship between strain and the incorporation of group III elements in ternary InGaN and InAlN grown by molecular beam epitaxy is reported. Using X-ray Photoelectron Spectroscopy compositional depth profiles with x-ray diffraction, we are able to find a clear relationship between strain and In incorporation including tensile-strained InAlN which has, to date, not been studied. The results show that fully strained films contain homogeneous indium composition while partially relaxed films have a non-homogeneous indium composition with depth. These results can be interpreted by considering the impurity formation energies of indium in host lattices.

36 MATERIALS SCIENCE↗

Tensile-strain and doping enhanced direct bandgap optical transition of n{sup +} doped Ge/GeSi quantum wells

Band structures of tensile strained and n{sup +} doped Ge/GeSi quantum wells (QWs) are calculated by multiple-band k·p method. The energy dispersion curves of the Γ and L conduction subbands are obtained. The effects of tensile strain and n{sup +} doping in Ge on direct bandgap optical gain and spontaneous radiative recombination rate spectra are investigated including the electron leakage from Γ to L conduction subbands. Our results show that the optical gain and spontaneous radiative recombination rate can be significantly increased with the tensile strain, n-type doping concentration, and injection carrier density in the Ge QW. The free carrier absorption is calculated and cannot be ignored because of the heavily doped Ge. The pure TM mode polarized net optical gain up to 1153 cm{sup −1} can be achieved for the Ge/Ge{sub 0.986}Si{sub 0.014} QW with tensile strain of 1.61% and n-type doping concentration of 30 × 10{sup 18} cm{sup −3}.

36 MATERIALS SCIENCE↗

Raman scattering studies of strain effects in (100) and (311)B GaAs{sub 1−x}Bi{sub x} epitaxial layers

We report room-temperature Raman studies of strained (100) and (311)B GaAs{sub 1−x}Bi{sub x} epitaxial layers for x ≤ 0.039. The Raman spectra exhibit a two-mode behavior, as well as disorder-activated GaAs-like phonons. The experimental results show that the GaAs-like LO(Γ) mode experiences a strong composition-dependent redshift as a result of alloying. The peak frequency decreases linearly from the value for pure GaAs (∼293 cm{sup −1}) with the alloyed Bi fraction x and the introduced in-plane lattice strain ε{sub ∥}, by Δω{sub LO}=Δω{sub alloy}−Δω{sub strain}. X-ray diffraction measurements are used to determine x and ε{sub ∥} allowing Δω{sub alloy} to be decoupled and is estimated to be −12(±4) cm{sup −1}/x for (100) GaAs{sub 1−x}Bi{sub x}. Δω{sub LO} is measured to be roughly double for samples grown on (311)B-oriented substrates to that of (100) GaAs. This large difference in redshift is accounted for by examining the Bi induced strain, effects from alloying, and defects formed during high-index (311)B crystal growth.

36 MATERIALS SCIENCE↗

Strain-induced orbital polarization and multiple phase transitions in Ba{sub 2}MnWO{sub 6} from first principles

Electronic structures of double perovskite Ba{sub 2}MnWO{sub 6} with epitaxial strain are explored by using methods based on density functional theory. An in-plane compressive strain is found not only resulting in a semiconductor-metal transition (SMT), but also altering the magnetic structures, from different kinds of antiferromagnetic to ferromagnetic orders. Orbital polarization and different orbital occupancies of Mn d{sub z{sup 2}} and d{sub x{sup 2}−y{sup 2}} states, induced by the epitaxial strain, are employed to understand the SMT. The rich magnetic phase transitions are rationalized by a magnetic stabilization mechanism. Our results show that many technological applications may be carried out in the material with the control of epitaxial strain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain analysis of compositionally tailored interfaces in InAs/GaSb superlattices

The effect of interface composition control on interfacial strain distribution in InAs/GaSb superlattices on (100)-GaSb substrates is investigated by atomic resolution scanning transmission electron microscopy. The interface composition was controlled by either depositing InSb at each interface or soaking the GaSb-on-InAs interface under Sb{sub 2} atmosphere. The strain profiles reveal a distinct difference in the extent to which the superlattice strain is balanced using the two methods. In particular, they indicate that the degree of strain balance achievable with soaking is inherently limited by the arsenic surface coverage during GaSb-on-InAs interface formation, emphasizing the influence of V/III flux ratio at this interface. The results also explain observed X-ray diffraction profiles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of lattice parameters, strain state and composition in semipolar III-nitrides using high resolution X-ray diffraction

In group-III-nitride heterostructures with semipolar or nonpolar crystal orientation, anisotropic lattice and thermal mismatch with the buffer or substrate lead to a complex distortion of the unit cells, e.g., by shearing of the lattice. This makes an accurate determination of lattice parameters, composition, and strain state under assumption of the hexagonal symmetry impossible. In this work, we present a procedure to accurately determine the lattice constants, strain state, and composition of semipolar heterostructures using high resolution X-ray diffraction. An analysis of the unit cell distortion shows that four independent lattice parameters are sufficient to describe this distortion. Assuming only small deviations from an ideal hexagonal structure, a linear expression for the interplanar distances d{sub hkl} is derived. It is used to determine the lattice parameters from high resolution X-ray diffraction 2ϑ-ω-scans of multiple on- and off-axis reflections via a weighted least-square fit. The strain and composition of ternary alloys are then evaluated by transforming the elastic parameters (using Hooke's law) from the natural crystal-fixed coordinate system to a layer-based system, given by the in-plane directions and the growth direction. We illustrate our procedure taking an example of (112{sup ¯}2) Al{sub κ}Ga{sub 1−κ}N epilayers with Al-contents over the entire composition range. We separately identify the in-plane and out-of-plane strains and discuss origins for the observed anisotropy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface strain engineering through Tb doping to study the pressure dependence of exciton-phonon coupling in ZnO nanoparticles

A compressive hydrostatic strain has been found to develop in the ZnO lattice as a result of accumulation of Tb ions on the surface of the nanoparticles for Tb mole-fraction less than 0.04. This hydrostatic strain can be controlled up to ≈14 GPa by varying the Tb mole-fraction. Here, we have utilized this novel technique of surface strain engineering through Tb doping for introducing hydrostatic compressive strain in the lattice to study the pressure dependent electronic and vibrational properties of ZnO nanoparticles. Our study reveals that when subjected to pressure, nanoparticles of ZnO behave quite differently than bulk in many aspects. Unlike bulk ZnO, which is reported to go through a wurtzite to rock-salt structural phase transition at ≈8 GPa, ZnO nanoparticles do not show such transition and remain in wurtzite phase even at 14 GPa of pressure. Furthermore, the Grüneisen parameters for the optical phonon modes are found to be order of magnitude smaller in ZnO nanoparticles as compared to bulk. Our study also suggests an increase of the dielectric constant with pressure, which is opposite to what has been reported for bulk ZnO. Interestingly, it has also been found that the exciton-phonon interaction depends strongly upon pressure in this system. The exciton-phonon coupling has been found to decrease as pressure increases. A variational technique has been adopted to theoretically calculate the exciton-LO phonon coupling coefficient in ZnO nanoparticles as a function of pressure, which shows a good agreement with the experimental results. These findings imply that surface engineering of ZnO nanoparticles with Tb could indeed be an efficient tool to enhance and control the optical performance of this material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards rapid nanoscale measurement of strain in III-nitride heterostructures

We report the structural and compositional nanoscale characterization of InAlN/GaN nanoribbon-structured high electron mobility transistors (HEMTs) through the use of geometric phase analysis (GPA) and nanobeam electron diffraction (NBED). The strain distribution in the HEMT layer is quantified and compared to the expected strain profile for the nominal structure predicted by finite element analysis (FEA). Using the experimental strain results, the actual structure is determined and used to modify the FEA model. The improved fit of the model demonstrates that GPA and NBED provide a powerful platform for routine and rapid characterization of strain in III-V semiconducting device systems leading to insights into device evolution during processing and future device optimization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Strain effect on the adsorption, diffusion, and molecular dissociation of hydrogen on Mg (0001) surface

The adsorption, diffusion, and molecular dissociation of hydrogen on the biaxially strained Mg (0001) surface have been systematically investigated by the first principle calculations based on density functional theory. When the strain changes from the compressive to tensile state, the adsorption energy of H atom linearly increases while its diffusion barrier linearly decreases oppositely. The dissociation barrier of H{sub 2} molecule linearly reduces in the tensile strain region. Through the chemical bonding analysis including the charge density difference, the projected density of states and the Mulliken population, the mechanism of the strain effect on the adsorption of H atom and the dissociation of H{sub 2} molecule has been elucidated by an s-p charge transfer model. With the reduction of the orbital overlap between the surface Mg atoms upon the lattice expansion, the charge transfers from p to s states of Mg atoms, which enhances the hybridization of H s and Mg s orbitals. Therefore, the bonding interaction of H with Mg surface is strengthened and then the atomic diffusion and molecular dissociation barriers of hydrogen decrease accordingly. Our works will be helpful to understand and to estimate the influence of the lattice deformation on the performance of Mg-containing hydrogen storage materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of an ultra-thin AlN/GaN superlattice interlayer on the strain engineering of GaN films grown on Si(110) and Si(111) substrates by plasma-assisted molecular beam epitaxy

We investigate the role of an ultra-thin AlN/GaN superlattice interlayer (SL-IL) on the strain engineering of the GaN films grown on Si(110) and Si(111) substrates by plasma-assisted molecular beam epitaxy. It is found that micro-cracks limitted only at the SL-IL position are naturally generated. These micro-cracks play an important role in relaxing the tensile strain caused by the difference of the coefficient of thermal expansion between GaN and Si and keeping the residual strain in the crack-free GaN epilayers resulted from the SL-IL during the growth. The mechanism understanding of the strain modulation by the SL-IL in the GaN epilayers grown on Si substrates makes it possible to design new heterostructures of III-nitrides for optic and electronic device applications.

36 MATERIALS SCIENCE↗

Effect of strain on thermoelectric power of suspended graphene

Thermoelectric power, S, of suspended graphene in the presence of strain is investigated. The electrons are considered to be scattered by in-plane and flexural phonons. The dominant contribution to S of non-strained and strained suspended graphene (SG) is found to be from the phonon drag component, S{sub g} for T < 90K. For T > 150 K contribution from diffusion thermopower becomes important. The effect of strain is found to be suppress S{sub d} and to alter its behavior, the effect being larger at higher temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coupling of magnetic field and lattice strain and its impact on electronic phase separation in La{sub 0.335}Pr{sub 0.335}Ca{sub 0.33}MnO{sub 3}/ferroelectric crystal heterostructures

Phase-separated La{sub 0.335}Pr{sub 0.335}Ca{sub 0.33}MnO{sub 3} films were epitaxially grown on (001)- and (111)-oriented ferroelectric single-crystal substrates. Upon poling along the [001] or [111] direction, dramatic decrease in resistance, up to 99.98%, and complete melting of the charge-ordered phase were observed, caused by poling-induced strain rather than accumulation of electrostatic charge at interface. Such poling-induced strain effects can be effectively tuned by a magnetic field and mediated by electronic phase separation. In particular, our findings show that the evolution of the strength of electronic phase separation against temperature and magnetic field can be determined by measuring the strain-tunability of resistance [(ΔR/R){sub strain}] under magnetic fields.

36 MATERIALS SCIENCE↗

Misfit strain driven cation inter-diffusion across an epitaxial multiferroic thin film interface

Cation intermixing at functional oxide interfaces remains a highly controversial area directly relevant to interface-driven nanoelectronic device properties. Here, we systematically explore the cation intermixing in epitaxial (001) oriented multiferroic bismuth ferrite (BFO) grown on a (001) lanthanum aluminate (LAO) substrate. Aberration corrected dedicated scanning transmission electron microscopy and electron energy loss spectroscopy reveal that the interface is not chemically sharp, but with an intermixing of ∼2 nm. The driving force for this process is identified as misfit-driven elastic strain. Landau-Ginzburg-Devonshire-based phenomenological theory was combined with the Sheldon and Shenoy formula in order to understand the influence of boundary conditions and depolarizing fields arising from misfit strain between the LAO substrate and BFO film. The theory predicts the presence of a strong potential gradient at the interface, which decays on moving into the bulk of the film. This potential gradient is significant enough to drive the cation migration across the interface, thereby mitigating the misfit strain. Our results offer new insights on how chemical roughening at oxide interfaces can be effective in stabilizing the structural integrity of the interface without the need for misfit dislocations. These findings offer a general formalism for understanding cation intermixing at highly strained oxide interfaces that are used in nanoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗