Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “soft”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

High-Power Femtosecond Soft X Rays from Fresh-Slice Multistage Free-Electron Lasers

In this paper, we demonstrate a novel multistage amplification scheme for self-amplified spontaneous-emission free electron lasers for the production of few femtosecond pulses with very high power in the soft x-ray regime. The scheme uses the fresh-slice technique to produce an x-ray pulse on the bunch tail, subsequently amplified in downstream undulator sections by fresh electrons. With three-stages amplification, x-ray pulses with an energy of hundreds of microjoules are produced in few femtoseconds. Finally, for single-spike spectra x-ray pulses the pulse power is increased more than an order of magnitude compared to other techniques in the same wavelength range.

43 PARTICLE ACCELERATORS↗

Supercompliant and Soft (CH_{3}NH_{3})_{3}Bi_{2}I_{9} Crystal with Ultralow Thermal Conductivity.

In this Letter, we show the phonon dispersion of (CH_{3}NH_{3})_{3}Bi_{2}I_{9} single crystals at 300 K measured by inelastic x-ray scattering. The frequencies of acoustic phonons are among the lowest of crystals. Nanoindentation measurements verified that these crystals are very compliant and considerably soft. The frequency overlap between acoustic and optical phonons results in strong acoustic-optical scattering. All these features lead to an ultralow thermal conductivity. The fundamental knowledge obtained from this study will accelerate the design of novel hybrid materials for energy applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Search for Supersymmetry with a Compressed Mass Spectrum in Events with a Soft $\tau$ Lepton, a Highly Energetic Jet, and Large Missing Transverse Momentum in Proton-Proton Collisions at $\sqrt{s}=$ TeV

The first search for supersymmetry in events with an experimental signature of one soft, hadronically decaying τ lepton, one energetic jet from initial-state radiation, and large transverse momentum imbalance is presented. These event signatures are consistent with direct or indirect production of scalar τ leptons (τ˜) in supersymmetric models that exhibit coannihilation between the τ˜ and the lightest neutralino (χ˜10), and that could generate the observed relic density of dark matter. The data correspond to an integrated luminosity of 77.2 fb-1 of proton-proton collisions at s=13 TeV collected with the CMS detector at the LHC in 2016 and 2017. The results are interpreted in a supersymmetric scenario with a small mass difference (Δm) between the chargino (χ˜1±) or next-to-lightest neutralino (χ˜20), and the χ˜10. The mass of the τ˜ is assumed to be the average of the χ˜1± and χ˜10 masses. The data are consistent with standard model background predictions. Upper limits at 95% confidence level are set on the sum of the χ˜1±, χ˜20, and τ˜ production cross sections for Δm(χ˜1±,χ˜10)=50 GeV, resulting in a lower limit of 290 GeV on the mass of the χ˜1±, which is the most stringent to date and surpasses the bounds from the LEP experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Soft Unclustered Energy Patterns in Proton-Proton Collisions at 13 TeV

The first search for soft unclustered energy patterns (SUEPs) is performed using an integrated luminosity of 138 fb −1 of proton-proton collision data at $\sqrt{𝑠}$ = 13 TeV, collected in 2016–2018 by the CMS detector at the LHC. Such SUEPs are predicted by hidden valley models with a new, confining force with a large ’t Hooft coupling. In events with boosted topologies, selected by high-threshold hadronic triggers, the multiplicity and sphericity of clustered tracks are used to reject the background from standard model quantum chromodynamics. With no observed excess of events over the standard model expectation, limits are set on the cross section for production via gluon fusion of a scalar mediator with SUEP-like decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nontrivial strength of van der Waals epitaxial interaction in soft perovskites

The van der Waals (vdW) bond is traditionally believed to be orders of magnitude lower than the typical chemical bond (i.e., ionic, metallic, or covalent), and hence the effects caused by a vdW interface are thought to be trivial. In this work, by investigating the vdW epitaxial growth of a mechanically soft perovskite on the vdW substrate, we obtained the solid proof of strong non-negligible vdW interaction. The experimental results illustrate the formation of cracks and holes for the relaxation of the vdW strain as well as a lattice-constant-dependent epitaxial angle evolution and a pronounced band-structure change. The first-principles calculations indicate that the contribution of the vdW interaction energy at the epitaxial interface reaches up to more than a quarter of the overall interaction energy far exceeding the traditionally recognized vdW bonding strength. Both the experimental and the theoretical work show that given the appropriate material system, the vdW interaction could be strong enough to significantly manipulate material properties.

36 MATERIALS SCIENCE↗

Microscopic dynamics of stress relaxation in a nanocolloidal soft glass

Here, we report x-ray photon correlation spectroscopy (XPCS) experiments with in situ rheometry performed on a soft glass composed of a concentrated suspension of charged silica nanoparticles subjected to step strains that induce yielding and flow. The XPCS measurements characterize the particle-scale and mesoscale motions within the glass that underlie the highly protracted decay of the macroscopic stress following the step strains. These dynamics are anisotropic, with slow, convective particle motion along the direction of the preceding shear that persists for surprisingly large times and that is accompanied by intermittent motion in the perpendicular (vorticity) direction. A close correspondence between the convective dynamics and stress relaxation is demonstrated by power-law scaling between the characteristic velocity of the collective particle motion and the rate of stress decay.

36 MATERIALS SCIENCE↗

Microstructural and rheological training and memory of nanocolloidal soft glasses under cyclic shear

An intrinsic feature of disordered and out-of-equilibrium materials, such as glasses, is the dependence of their properties on their history. An important example is rheological memory, in which disordered solids obtain properties based on their deformation history. Here, in this study, we employ x-ray photon correlation spectroscopy with in situ rheometry to characterize memory formation in a nanocolloidal soft glass due to cyclic shear. During a cycle, particles undergo irreversible displacements composed of a combination of shear-induced diffusion and heterogeneous, residual strain fields. At lower shear amplitudes, the displacements resemble a random walk in which the directions in each cycle are independent of those in preceding cycles, while at high amplitude, the irreversible displacements in consecutive cycles become correlated. The magnitudes of the displacements decrease with each cycle before reaching a steady state where the microstructure has been trained to achieve enhanced reversibility even at shear amplitudes well above yielding and despite the presence of thermal fluctuations. At amplitudes below and near yielding, these decreases are monotonic, while well above yielding, they are nonmonotonic, suggesting evidence of shear banding. Accompanying this microstructural training are corresponding decreases in the dissipation during each cycle and the magnitude of the residual stress toward steady-state values. Memory of the training is revealed by measurements in which the amplitude of the shear is changed after steady state is reached. The magnitude of the particle displacements, as well as the dissipation and the change in residual stress, vary nonmonotonically with the new shear amplitude, having minima near the training amplitude, thereby revealing correlated microscopic and macroscopic signatures of memory.

Chen, Yihao [Johns Hopkins Univ., Baltimore, MD (U↗

Exact results in softly broken supersymmetric chiral gauge theories with flavor

We present exact results in softly broken supersymmetric SU⁡(𝑁 𝐶 ) chiral gauge theories with charged fermions in one antisymmetric, 𝑁 𝐹 fundamental, and 𝑁 𝐶 + 𝑁 𝐹 − 4 antifundamental representations. We achieve this by considering the supersymmetric version of these theories and utilizing anomaly mediated supersymmetry breaking at a scale 𝑚 ≪ Λ to generate a vacuum. The connection to nonsupersymmetric theories is then conjectured in the limit 𝑚 → ∞. For odd 𝑁 𝐶 , we determine the massless fermions and unbroken global symmetries in the infrared. For even 𝑁 𝐶 , we find global symmetries are nonanomalous and no massless fermions. In all cases, the symmetry breaking patterns differ from what the tumbling hypothesis would suggest.

Anomalies↗

Optical design of the Short Pulse Soft X-ray Spectroscopy beamline at the Advanced Photon Source

The Short Pulse X-ray facility planned for the Advanced Photon Source (APS) upgrade will provide two sectors with photon beams having picosecond pulse duration. The Short Pulse Soft X-ray Spectroscopy (SPSXS) beamline will cover the 150–2000 eV energy range using an APS bending magnet. SPSXS is designed to take full advantage of this new timing capability in addition to providing circular polarized radiation. Since the correlation between time and electron momentum is in the vertical plane, the monochromator disperses in the horizontal plane. The beamline is designed to maximize flux and preserve the time resolution by minimizing the number of optical components. The optical design allows the pulse duration to be varied from 1.5 to 100 ps full width at half-maximum (FWHM) without affecting the energy resolution, and the resolution to be changed with minimal effect on the pulse duration. More than 10 9 photons s -1 will reach the sample with a resolving power of 2000 and a pulse duration of ~2 ps for photon energies between 150 and 1750 eV. The spot size expected at the sample position will vary with pulse duration and exit slit opening. At 900 eV and at a resolving power of 2000 the spot will be ~10 µm × 10 µm with a pulse duration of 2.3 ps FWHM.

47 OTHER INSTRUMENTATION↗

The Soft X-ray research instrument at the Linac Coherent Light Source

The Soft X-ray Research instrument provides intense ultrashort X-ray pulses in the energy range 280–2000 eV. A diverse set of experimental stations may be installed to investigate a broad range of scientific topics such as ultrafast chemistry, highly correlated materials, magnetism, surface science, and matter under extreme conditions. A brief description of the main instrument components will be given, followed by some selected scientific highlights.

43 PARTICLE ACCELERATORS↗

Combining THz laser excitation with resonant soft X-ray scattering at the Linac Coherent Light Source

This paper describes the development of new instrumentation at the Linac Coherent Light Source for conducting THz excitation experiments in an ultra high vacuum environment probed by soft X-ray diffraction. This consists of a cantilevered, fully motorized mirror system which can provide 600 kV cm⁻¹ electric field strengths across the sample and an X-ray detector that can span the full Ewald sphere with in-vacuum motion. The scientific applications motivated by this development, the details of the instrument, and spectra demonstrating the field strengths achieved using this newly developed system are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Angular dispersion enhanced prebunch for seeding ultrashort and coherent EUV and soft X-ray free-electron laser in storage rings

Prebunching is an effective technique to reduce the radiation saturation length and to improve the longitudinal coherence and output stability in storage-ring-based free-electron lasers (FELs). A novel technique is introduced which uses angular dispersion to enhance the high-harmonic bunching with very small laser-enabled energy spread. This technique can effectively reduce the radiation saturation length without significantly reducing the peak power of the FEL. Numerical simulations reveal that this technique can be used for the generation of 100 MW scale level, fully temporal coherent femtosecond extreme-ultraviolet and soft X-ray radiation pulses through a 10 m-long undulator based on a diffraction-limited storage ring.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Chemical and elemental mapping of spent nuclear fuel sections by soft X-ray spectromicroscopy

Soft X-ray spectromicroscopy at the O K -edge, U N 4,5 -edges and Ce M 4,5 -edges has been performed on focused ion beam sections of spent nuclear fuel for the first time, yielding chemical information on the sub-micrometer scale. To analyze these data, a modification to non-negative matrix factorization (NMF) was developed, in which the data are no longer required to be non-negative, but the non-negativity of the spectral components and fit coefficients is largely preserved. The modified NMF method was utilized at the O K -edge to distinguish between two components, one present in the bulk of the sample similar to UO 2 and one present at the interface of the sample which is a hyperstoichiometric UO 2+ x species. The species maps are consistent with a model of a thin layer of UO 2+ x over the entire sample, which is likely explained by oxidation after focused ion beam (FIB) sectioning. In addition to the uranium oxide bulk of the sample, Ce measurements were also performed to investigate the oxidation state of that fission product, which is the subject of considerable interest. Analysis of the Ce spectra shows that Ce is in a predominantly trivalent state, with a possible contribution from tetravalent Ce. Atom probe analysis was performed to provide confirmation of the presence and localization of Ce in the spent fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Design for a Soft Error Resilient Dynamic Task-Based Runtime, In: 2015 IEEE International Parallel and Distributed Processing Symposium

As the scale of modern computing systems grows, failures will happen more frequently. On the way to Exactable a generic, low-overhead, resilient extension becomes a desired aptitude of any programming paradigm. In this paper we explore three additions to a dynamic task-based runtime to build a generic framework providing soft error resilience to task-based programming paradigms. The first recovers the application by re-executing the minimum required sub-DAG, the second takes critical checkpoints of the data flowing between tasks to minimize the necessary re-execution, while the last one takes advantage of algorithmic properties to recover the data without re-execution. These mechanisms have been implemented in the PaRSEC task-based runtime framework. Experimental results validate our approach and quantify the overhead introduced by such mechanisms.

Computer Science↗

Droop Compensation with soft Switching for High Voltage Converter Modulator (HVCM)

High Voltage Converter Modulators (HVCM) offer significant performance advantages over conventional modulator technologies for long pulse applications. One of the key advantages of HVCM technology is the ability to compensate for capacitor bank voltage droop. Achieving droop compensation without incurring significant additional switching loss has not been possible in existing designs. This paper presents an analysis of the 'Y-point' variant of the HVCM topology using the Combined Phase and Frequency Modulation (CPFM) technique. This, combined with the addition of a 'lossless' snubber circuit, enables droop compensation while achieving soft switching over the entire pulse duration. The rise time and overshoot of the output voltage pulse is optimized using an iterative extreme seeking algorithm. The optimization reduces the rise time from 100 {micro}s to 50 {micro}s with no overshoot. This will lead to an increase in overall accelerator efficiency.

42 ENGINEERING↗

Highly Laminated Soft Magnetic Electroplated CoNiFe Thick Films

The fabrication and characterization of highly laminated (similar to 40 layers), thick (similar to 40 mu m) films of magnetically soft cobalt-nickel-iron are presented. Thick film fabrication is based on automated sequential electrodeposition of alternating CoNiFe and copper layers, followed by selective copper removal. The film, comprised tens of 1 mu m thick laminations, exhibits saturation flux density of 1.8 T and coercivity of approximately 1.3 Oe. High-frequency film characterization took place in a 36-turn test inductor, which demonstrated constant inductance of 1.6 mu H up to 10 MHz, indicating suppressed eddy-current loss. Quality factor exceeding 40 at 1 MHz, surpassing the performance of similarly fabricated Permalloy (Ni80Fe20) films.

Kim, J↗

Thin-Entrance Window Sensors for Soft X-rays at LCLS-II

Free electron lasers, such as SLAC’s LCLS-II, will provide unique scientific imaging opportunities. In order to fully utilize these facilities, we need to develop detectors with shallow entrance windows that will enable detection of soft x-rays from 250eV-1.5KeV. Here, a new microwave annealing technology provides an efficient way to achieve shallow entrance windows in fully depleted high resistivity silicon sensors.

47 OTHER INSTRUMENTATION↗

Use of Transition Models to Design High Performance TESs for the LCLS-II Soft X-Ray Spectrometer

We are designing an array of transition-edge sensor (TES) microcalorimeters for a soft X-ray spectrometer at the Linac Coherent Light Source at SLAC National Accelerator Laboratory to coincide with upgrades to the free electron laser facility. The complete spectrometer will have 1000 TES pixels with energy resolution of 0.5 eV full-width at half-maximum (FWHM) for incident energies below 1 keV while maintaining pulse decay-time constants shorter than 100 μs. In the past, TES pixels have often been designed for a particular scientific application via a combination of simple scaling relations and trial-and-error experimentation with device geometry. We have improved upon this process by using our understanding of transition physics to guide TES design. Using the two-fluid approximation of the phase-slip line model for TES resistance, we observe how the geometry and critical temperature of a TES will affect the shape of the transition. We have used these techniques to design sensors with a critical temperature of 55 mK. The best sensors achieve an energy resolution of 0.75 eV FWHM at 1.25 keV. Building upon this result, we show how the next generation of sensors can be designed to reach our goal of 0.5 eV resolution.

47 OTHER INSTRUMENTATION↗