Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “single-crystal diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Single-crystal structure study of iron chalcogenides Fe{sub 1+δ}Te{sub 1−x}S{sub x}

Single crystals of iron chalcogenides Fe{sub 1+δ}Te{sub 1−x}S{sub x} (x = 0, 0.09, and 0.1) were studied by scanning, transmission, and scanning transmission electron microscopy. In addition, a sample with x = 0 was studied by X-ray diffraction. The Te-site disorder observed in Fe{sub 1+δ} samples is, apparently, assigned to the incorporation of superstoichiometric iron Fe2 into the structure. The Fe1 atoms were found to be displaced from their ideal positions, which can only partially be attributed to electro-optical effects. The replacement of Te atoms by S in Fe{sub 1+δ}Te{sub 1−x}S{sub x} crystals gives rise to domains with ordered S atoms in some regions of the single crystal, resulting in the formation of a 2 × 1 or 2 × 2 superstructure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of large naphthalene and anthracene single-crystal sheets at the liquid–air interface

The growth of organic single crystals of naphthalene (C{sub 10}H{sub 8}) and anthracene (C{sub 14}H{sub 10}) at the liquid‒air interface from a mixture of solvents has been investigated. The growth technique used in the study makes it possible to obtain single-crystal sheets up to 10 mm in size for 24 h. The surface morphology and structure of the crystals have been analyzed by optical microscopy and X-ray diffraction. C{sub 10}H{sub 8} and C{sub 14}H{sub 10} single crystals grow coplanarly along the (001) plane. A thermodynamic model of the flat-crystal nucleus formation at the liquid‒air interface, based on the analysis of the change in the free Gibbs energy, is considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth from Solution, Structure, and Optical Properties of Single-Crystal para-Quaterphenyl Films

Samples of single-crystal para-quaterphenyl films up to 8 mm long and 50 μm thick have been obtained for the first time by the solvent‒antisolvent growth method. The films have been grown both on the liquid–air interface and in the solution bulk. The morphology, surface quality, and thickness of crystal films have been investigated by the optical, laser confocal, and atomic force microscopies. The structure of the para-quaterphenyl single crystal at room temperature has been refined by X-ray diffraction analysis. The formation and growth mechanisms of crystal films on the liquid–air interface have been discussed. The opticalabsorption and photoluminescence spectra of the solutions and crystal samples have been investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of Bicrystal Films of YBa{sub 2}Cu{sub 3}O{sub 7} High-Temperature Superconductor, with CuO Planes Tilted by up to 90°, on SrTiO{sub 3} Crystals

Bicrystal substrates, in which (100) planes in both single-crystal parts are rotated with respect to the surface by different angles around the [100] and [110] directions (parallel simultaneously to both the surface and bicrystal boundary), have been fabricated by solid-phase intergrowth on SrTiO{sub 3} crystals. Epitaxial bicrystal YBa{sub 2}Cu{sub 3}O{sub 7} films with different tilt angles of CuO planes to the surface have been grown on these bicrystals by pulsed laser deposition. The structure of these films has been investigated by X-ray diffraction. The films are shown to remain epitaxial when the film lattice is rotated from the position in which its (001) plane is oriented parallel to the surface by angles of up to 41° and 49° around the [100] and [110] axes, respectively. The possibility of growing bicrystal films of YBa{sub 2}Cu{sub 3}O{sub 7} high-temperature superconductor (HTSC), in which the CuO planes at different sides of the bicrystal boundary make different angles (up to 90°, which is the maximum possible angle from the symmetry point of view), has been demonstrated based on these data.

36 MATERIALS SCIENCE↗

Growth from Solutions, Structure, and Photoluminescence of Single-Crystal Plates of p-Terphenyl and Its Trimethylsilyl Derivative

Samples of single-crystal plates of p-terphenyl (3Р) and its derivative with terminal substituents–Si(CH{sub 3}){sub 3} (TMS-3P-TMS), up to 25–30 mm in size and 400 μm thick, have been obtained for the first time by the solvent–antisolvent growth method. The crystal structure at temperatures of 293 and 85 K is refined for 3Р and solved (for the first time) for TMS-3P-TMS using X-ray diffraction. The habit of crystals and their surface morphology are investigated by methods of optical and laser confocal microscopy. The influence of substituent terminal groups -Si(CH{sub 3}){sub 3} on the growth and structure of TMS-3P-TMS crystals is analyzed based on experimental data. The optical absorption and photoluminescence spectra of solutions and crystalline samples are investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CdTe as a passivating layer in CdTe/HgCdTe heterostructures

CdTe/Hg{sub 1-x}Cd{sub x}Te heterostructures are studied. In the structures, CdTe is used as a passivating layer deposited as a polycrystal or single crystal on a single-crystal Hg{sub 1-x}Cd{sub x}Te film. The film and a passivating layer were obtained in a single technological process of molecular beam epitaxy. The structure of passivating layers was studied by reflection high-energy electron diffraction, and the effect of the structure of the passivating layer on the properties of the active layer was studied by X-ray diffractometry. Mechanical properties of heterostructures were studied by the microhardness method. Electrical and photoelectrical parameters of the Hg{sub 1-x}Cd{sub x}Te films are reported.

36 MATERIALS SCIENCE↗

The structure and optical properties of nanocrytalline lead sulfide films

The crystal structure of lead sulfide (PbS) films produced by chemical deposition onto a glass substrate is studied by X-ray diffraction analysis. The thickness of the synthesized films is {approx}120 nm, the dimensions of the regions of coherent scattering are 70-80 nm, and the magnitude of microstrains is {approx}0.20%. It is established that the crystal structure of the synthesized PbS films and of the same films annealed at the temperature 293-423 K is cubic (space group Fm 3m) and corresponds to the D0{sub 3} type that differs from the B1 type typical of coarse-grained PbS. In the cubic structure of the PbS nanofilms, there is a latent nonstoichiometric distribution of S atoms and vacancies among octahedral sites 4(b) and tetrahedral positions 8(c). The optical transmittance of the nanocrystalline PbS films is measured in the wavelength range from 200 to 3270 nm. The most pronounced variations in the transmittance is observed in the wavelength range from 700-800 to 1600-2000 nm (corresponding to the photon energy range from {approx}1.8 to {approx}0.7 eV). It is established that the band gap E{sub g} is 0.83-0.85 eV, i.e., it is larger than the band gap of single-crystal PbS, 0.41 eV.

36 MATERIALS SCIENCE↗

Effect of silicon on relaxation of the crystal lattice in MOCVD-hydride Al{sub x}Ga{sub 1-x}As:Si/GaAs(100) heterostructures

The X-ray diffraction and infrared spectroscopy data for MOCVD-hydride Al{sub x}Ga{sub 1-x}As:Si/GaAs(100) heterostructures and homoepitaxial GaAs:Si/GaAs(100) structures doped with Si to a content of up to {approx}1 at % are reported. It is shown that, in the homoepitaxial heterostructures, the formation of alloys with Si yields a decrease in the crystal lattice parameters of the epitaxial layer and a negative lattice mismatch with the single-crystal substrate ({Delta}a < 0). At the same time, the formation of quaternary alloys in the Al{sub x}Ga{sub 1-x}As:Si/GaAs(100) heterostructures is not accompanied by any pronounced strains in the crystal lattice. By introducing Si into the epitaxial layers of these heterostructures, it is possible to attain complete matching of crystal lattice parameters of the film and substrate in the appropriately chosen technological conditions of growth of the epitaxial layers.

36 MATERIALS SCIENCE↗

Fe 3+ /Fe T ratios of amphiboles determined by high spatial resolution single-crystal synchrotron Mössbauer spectroscopy

The Fe 3+ /Fe T ratios (Fe 3+ /[Fe 2+ +Fe 3+ ]) in minerals can be used to understand their crystallization and post-crystallization conditions. However, as natural minerals are often zoned and contain inclusions, bulk techniques, e.g., wet chemistry, may not provide accurate Fe 3+ /Fe T values for a single phase of interest. We determined Fe 3+ /Fe T ratios of amphiboles in different crystallographic orientations by single-crystal synchrotron Mössbauer spectroscopy (SMS) in energy and time domain modes from four volcanic localities (Long Valley Caldera, Mount St. Helens, Lassen Volcanic Center, U.S.A., and Mt. Pinatubo, Philippines). The high spatial resolution (as low as 12 × 12 μm spot size) and standard-free nature of SMS allow the detection of intra-grain compositional heterogeneities in Fe 3+ /Fe T with relatively low uncertainties. Here, we combine SMS with major element compositions, water contents, and hydrogen isotope compositions to document the Fe 3+ /Fe T ratios as a function of mineral composition and post-crystallization dehydrogenation. Spectra were fitted with up to five distinct sites: ferrous iron on M(1), M(2), M(3), and ferric iron on M(2) and M(3), consistent with X-ray diffraction studies on single crystals of amphibole. The Fe 3+ /Fe T ratios range from 0.14 ± 0.03 (Long Valley Caldera), 0.51 to 0.63 ± 0.02 (representing intra-grain heterogeneities, Mount St. Helens) to 0.86 ± 0.03 (Lassen Volcanic Center). The latter grain experienced post-crystallization dehydrogenation, shown by its low water content (0.6 ± 0.05 wt%) and its elevated hydrogen isotope composition (δD = +25 ± 3‰ relative to SMOW). The Fe 3+ /Fe T ratios of 0.62 ± 0.01 and 0.20 ± 0.01 of two Mt. Pinatubo grains correlate with high-Al 2 O 3 cores and low-Al 2 O 3 rims and smaller phenocrysts in the sample, respectively. This study shows that SMS is capable of distinguishing two different domains with dissimilar Fe 3+ /Fe T values formed under different crystallization conditions, demonstrating that SMS in combination with major element, water, and hydrogen isotope compositions allows the interpretation of amphibole Fe 3+ /Fe T ratios in the context of crystallization and post-crystallization processes.

47 OTHER INSTRUMENTATION↗

Vertical Bridgman growth and characterization of Cd 0.95-x Mn x Zn 0.05 Te (x=0.20, 0.30) single-crystal ingots

Solid-liquid phase transitions in Cd 0.95-x Mn x Zn 0.05 Te alloys with x = 0.20 and 0.30 were investigated by differential thermal analysis (DTA). The heating/cooling rates were 5 and 10 K/min with a melt dwell time of 10, 30 and 60 minutes. Cd 0.95-x Mn x Zn 0.05 Te (x=0.20, 0.30) single-crystal ingots were grown by the vertical Bridgman method guided using the DTA results. Te inclusions (1-20 microns), typical for CdTe and Cd(Zn)Te crystals, were observed in the ingots by infrared transmission microscopy. The measured X-ray diffraction patterns showed that all compositions are found to be in a single phase. Using current-voltage (I-V) measurements, the resistivity of the samples from each ingot was estimated to be about 10 5 Ohm·cm. The optical transmission analysis demonstrated that the band-gap width of the investigated ingots increased from 1.77 to 1.88 eV with the increase of the MnTe content from 20 to 30 mol. %.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Synthesis of Lanthanide-Based Intermetallic Silicides

Lanthanide-containing materials are of interest because of their useful magnetic and electronic behavior. To study this intrinsic behavior, researchers need high-quality single crystals to avoid interference from grain boundaries or defects commonly found in polycrystalline samples. One method for growing single crystals is metal-flux synthesis, an approach that promotes crystal growth at lower reaction temperatures thus providing access to complex intermetallic phases. My project focuses on synthesizing novel lanthanide-containing intermetallic silicides related to previously reported f-element compounds with the Gd1??Fe4Si10?? structure type. I investigated reactions targeting lanthanum, praseodymium, neodymium, samarium, europium, and gadolinium-containing products, and used scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) to identify promising lanthanide-containing phases. I prepared reactions by loading lanthanide oxides, Co, Si, Al, and Ga into alumina crucibles in a 0.2:1:1:10:10 Ln2O3/Co/Si/Al/Ga mmol ratio, where Ln = La, Nd, Pr, Sm, Eu, or Gd. The reactions were sealed in quartz tubes, heated in a furnace, and centrifuged to separate crystals from excess flux. Afterwards, I mechanically isolated single crystals and prepared them for characterization. Pr-, Nd-, and Sm-containing reactions were confirmed through SEM-EDS to have formed the targeted quaternary phase. Single crystal X-ray diffraction (SC-XRD) data showed the Nd-containing crystals exhibited a hexagonal unit cell associated with the Gd1??Fe4Si10?? structure type. La- and Eu-containing reactions instead formed competing Co(Al/Ga/Si)3 phase crystals. Single-crystal XRD, powder XRD, and magnetic susceptibility and heat-capacity measurements will be collected for the remaining lanthanide-containing crystals. This data will help determine the complete crystal structure of the lanthanide analogues, their phase purity and whether they exhibit localized magnetic behavior, magnetic ordering, or other electronic signatures that can be compared with the previously reported actinide analogues. The disordered structure of this intermetallic family is associated with unusual magnetic and electronic behavior meaning lanthanide analogues may show potential as thermoelectric materials. Developing new thermoelectric candidate materials is relevant to energy efficiency and waste-heat recovery, which supports DOE’s broader goal of advancing science and technology solutions for America’s energy needs.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗

SrNi(VO 4 )(OH): The High-Temperature Hydrothermal Synthesis and Magnetic Properties of an Adelite-Descloizite-Type Structure

Single crystals of a new transition metal adelite-descloizite-type structure were synthesized using a high temperature (580 °C) high-pressure hydrothermal technique. Single crystal X-ray diffraction and energy dispersive X-ray analysis (EDX) were used to investigate the structure and elemental composition, respectively. SrNi(VO 4 )(OH) crystallizes in an acentric orthorhombic crystal system in the space group P2 1 2 1 2 1 (no. 19); Z = 4, a = 5.9952(4) Å, b = 7.5844(4) Å, c = 9.2240(5) Å. The structure is comprised of a Ni–O–V framework where Sr 2+ ions reside inside the channels. Single-crystal magnetic measurements display a significant anisotropy in both temperature- and field-dependent data. The temperature dependent magnetic measurement shows antiferromagnetic behavior at T N ~8 K. Overall, the magnetic properties indicate the presence of competing antiferromagnetic and ferromagnetic interactions of SrNi(VO 4 )(OH).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability of Y-Ba-Cu-oxide phases in salt flux

The results of an investigation into the possibility of growing YBa2Cu3O7 (or Y123) single crystals from a NaCl-KCl flux (salt flux) are presented. They are compared with results for Y123 crystals grown from a Ba-Cu-oxide flux system. The chosen salt flux composition was 1:1 (NaCl:KCl). The preparation method of the solutes is presented, with particular attention given to the compounds surrounding the Y123 phase, such as Y2BaCuO6 (Y211). Optical microscopy was introduced to study the morphology of the sample; X-ray diffraction was used for phase identification; and a chemical analysis was effected. The Y123, Y211, and BaCuO2 phases were shown to be dissociated in the NaCl-KCl flux, and could not be recrystallized. A small amount of the flux could be added to create large-grain Y123 crystals, but single-crystal growth was not possible in a top-seeded NaCl-KCl solution. This is attributed to significant differences in solubility of the crystal elements, and phase separation caused by CuO crystal formation.

Tao, Y. K.↗

Synthesis, Structure, Characterization, and Decomposition of Nickel Dithiocarbamates: Effect of Precursor Structure and Processing Conditions on Solid-State Products

Single-crystal X-ray structures of four nickel dithiocarbamate complexes, the homoleptic mixed-organic bis-dithiocarbamates Ni[S2CN(isopropyl)(benzyl)]2, Ni[S2CN(ethyl)(n-butyl)]2, and Ni[S2CN(phenyl)(benzyl)]2, as well as the heteroleptic mixed-ligand complex NiCl[P(phenyl)3][(S2CN(phenyl)(benzyl)], were determined. Synthetic, spectroscopic, structural, thermal, and sulfide materials studies are discussed in light of prior literature. The spectroscopic results are routine. A slightly distorted square-planar nickel coordination environment was observed for all four complexes. The organic residues adopt conformations to minimize steric interactions. Steric effects also may determine puckering, if any, about the nickel and nitrogen atoms, both of which are planar or nearly so. A trans-influence affects the Ni-S bond distances. Nitrogen atoms interact with the CS2 carbons with a bond order of about 1.5, and the other substituents on nitrogen display transoid conformations. There are no strong intermolecular interactions, consistent with prior observations of the volatility of nickel dithiocarbamate complexes. Thermogravimetric analysis of the homoleptic species under inert atmosphere is consistent with production of 1:1 nickel sulfide phases. Thermolysis of nickel dithiocarbamates under flowing nitrogen produced hexagonal or -NiS as the major phase; thermolysis under flowing forming gas produced millerite (-NiS) at 300 C, godlevskite (Ni9S8) at 325 and 350 C, and heazlewoodite (Ni3S2) at 400 and 450 C. Failure to exclude oxygen results in production of nickel oxide. Nickel sulfide phases produced seem to be primarily influenced by processing conditions, in agreement with prior literature. Nickel dithiocarbamate complexes demonstrate significant promise to serve as single-source precursors to nickel sulfides, a quite interesting family of materials with numerous potential applications.

microscopy↗

Instrument development continues in Oak Ridge

Peer review panels composed of 80 external scientists recently visited Oak Ridge National Laboratory (ORNL) to review almost 700 proposals for experiments on 23 instruments at the Spallation Neutron Source (SNS) and High Flux Isotope Reactor (HFIR). These were proposed for the time period from January-June 2012. About 40% of the proposals were approved for beam time and 20% were placed on an alternate list if time becomes available. The Hybrid Spectrometer HYSPEC at SNS began its commissioning in September 2011. HYSPEC is otpimized for studying low energy dynamics in single-crystal samples using a broad variety of sample environments, and is equipped with a polarization analysis capability. It is expected to be available for users on a limited basis in the second half of 2012. The detector tank of CORELLI has been installed on beamline 9 at SNS. Now that the tank is in place, banks of neutron detectors and boron carbide shielding will be installed around the interior. CORELLI is optimized to probe complex disorder in crystalline materials through diffuse scattering from single-crystal samples. It will begin commissioning in 2014. CORELLI is one of four instruments being developed under the SING II (SNS Instruments Next Generation II) project. The others are the Macromolecular Neutron Diffractometer (MANDI), the Vibrational Spectrometer (VISION, scheduled to begin commissioning in 2012), and the Time of Flight Ultra Small Angle Neutron Scattering Instrument (TOF-USANS). The single crystal neutron diffractometer IMAGINE, was deliverd to HFIR in October 2011. Preliminary testing has been carried out. IMAGINE will provide atomic resolution information on chemical, organic, metallo-organic and protein single crystals that will enable their chemical, physical and biological structure and function to be understood. This instrument will benefit scientists with interests in pharmaceuticals, minerals and other inorganic crystals, small molecules, molecular organo-metallic crystals and metal-organic frameworks (MOFs) molecular crystal structures. The quasi-Laue geometry, combined with a large solid angle detector, will enable rapid data collection from crystals with volume < 1mm{sup 1} and unit cell < 100 {angstrom}. Construction and installation of the optical system is in progress. Commissioning is expected to start in April 2012.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure, Properties, and Theoretical Electronic Structure of UCuOP and Np3S5.

The compounds UCuOP and NpCuOP have been synthesized and their crystal structures were determined from low-temperature single-crystal X-ray data. These isostructural compounds crystallize with two formula units in space group P4/nmm of the tetragonal system. Each An atom (An = U or Np) is coordinated to four O and four P atoms in a distorted square antiprism; each Cu atom is coordinated to four P atoms in a distorted tetrahedron. Magnetic susceptibility measurements on crushed single crystals indicate that UCuOP orders antiferromagnetically at 224(2) K. Neutron diffraction experiments at 100 and 228 K show the magnetic structure of UCuOP to be type AFI ( - -) where ferromagnetically aligned sheets of U atoms in the (001) plane order antiferromagnetically along [001]. The electrical conductivity of UCuOP exhibits metallic character. Its electrical resistivity measured in the ordered region with the current flowing within the tetragonal plane is governed by the scattering of the conduction electrons on antiferromagnetic spin-wave excitations. The electrical resistivity of single-crystalline NpCuOP shows semimetallic character. It is dominated by a pronounced hump at low temperatures, which likely arises owing to long-range magnetic ordering below about 90 K. Density of state analyses using the local spin-density approximation show covalent overlap between AnO and CuP layers of the structure and dominant contributions from 5f-actinide orbitals at the Fermi level. Calculations on a 2 2 2 supercell of NpCuOP show ferromagnetic ordering within the Np sheets and complex coupling between these planes. Comparisons of the physical properties of these AnCuOP compounds are made with those of the family of related tetragonal uranium phosphide compounds.

Wells, Daniel M.↗

Reciprocal space XRD mapping with varied incident angle as a probe of structure variation within surface depth

In this study, we used a differential-depth X-Ray diffraction Reciprocal Spacing Mapping (XRD RSM) technique to investigate the crystal quality of a variety of SRF-relevant Nb film and bulk materials. By choosing different X-ray probing depths, the RSM study successfully revealed evolution the of materials microstructure after different materials processes, such as energetic condensation or surface polishing. The RSM data clearly measured the materials crystal quality at different thickness. Through a novel differential-depth RSM technique, this study found: I. for a heteroepitaxy Nb film Nb(100)/MgO(100), the film thickening process, via a cathodic arc-discharge Nb ion deposition, created a near-perfect single crystal Nb on the surfaces top-layer; II. for a mechanically polished single-crystal bulk Nb material, the microstructure on the top surface layer is more disordered than that in-grain.

Yang, Qiguang↗

Synthesis and crystal structure of Ru{sup III}-supported tungstoantimonate [Sb{sub 2}W{sub 20}Ru{sup III}{sub 2}(H{sub 2}O){sub 2}(dmso){sub 6}O{sub 68}]{sup 4-}

The first Ru{sup III}-supported tungstoantimonate [Ru{sup II}(bpy){sub 3}]{sub 2}[Sb{sub 2}W{sub 20}Ru{sup III}{sub 2}(H{sub 2}O){sub 2}(dmso){sub 6}O{sub 68}].3dmso (bpy=bi-pyridine) (1a) has been successfully isolated as [Ru(bpy){sub 3}]{sup 2+} (Rubpy) salt by routine synthetic reaction in mixed solutions with dmso and water. Single-crystal X-ray analysis was carried out on 1a, which crystallizes in the triclinic system space group P-1 with a=16.804 (6), b=16.988 (6), c=17.666 (6) A, alpha=107.397 (13){sup o}, beta=106.883 (13){sup o}, gamma=103.616 (12){sup o}. V=4309 (3) A{sup 3}, Z=1 with R1=0.0773. The compound 1a reveals the following features: (1) Rubpy is firstly used as an alternative ruthenium-source for the synthesis of Ru-substituted heteropolytungstate; (2) the structure of 1a consists of four Ru{sup III}-O-S(CH{sub 3}){sub 2} and two W-O-S(CH{sub 3}){sub 2} bonds resulting in an assembly with C{sub 2} symmetry; (3) the Ru{sup III} ions are linked to two dmso groups via two Ru{sup III}-O-S(CH{sub 3}){sub 2} bonds, which represents the other dmso-coordination mode to Ru{sup III} in POM chemistry. The cyclic voltammetry studies of 1a in dmso/H{sub 2}SO{sub 4} (3/1 v/v) at pH 2.5 medium using the glassy carbon electrode as a working electrode show the respective electrochemical behaviors of the W-centers and the Ru-centers within 1a, which could be separated clearly. In addition, the compound 1a exhibits photoluminescence arising from pi*-t{sub 2g} ligand-to-metal transition of Rubpy. - Graphical abstract: The first Ru{sup III}-supported tungstoantimonate [Ru{sup II}(bpy){sub 3}]{sub 2}[Sb{sub 2}W{sub 20}Ru{sup III}{sub 2}(H{sub 2}O){sub 2}(dmso){sub 6}O{sub 68}].3dmso (bpy=bi-pyridine) (1a) has been synthesized using Ru(bpy){sub 3}Cl{sub 2} as an alternative ruthenium-source and structurally characterized.

36 MATERIALS SCIENCE↗