Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “recent availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

High Availability On-line Relational Databases for Accelerator Control and Operation

The role that relational database (RDB) technology plays in accelerator control and operation continues to grow in such areas as electronic logbooks, machine parameter definitions, and facility infrastructure management. RDBs are increasingly relied upon to provide the official 'master' copy of these data. Whereas the services provided by the RDB have traditionally not been 'mission critical', the availability of modern RDB management systems is now equivalent to that of standard computer file-systems. RDBs can be relied on to supply pseudo real-time response to operator and machine physicist requests. This paper describes recent developments in the IRMIS RDB project. Generic lattice support has been added, serving as the driver for model-based machine control. Abstract physics name service and process variable introspection has been added. Specific emphasis has been placed both on providing fast response time to accelerator operators and modeling code requests, as well as high (24/7) availability of the RDB service.

43 PARTICLE ACCELERATORS↗

Proteogenomic strategies for identification of aberrant cancer peptides using large-scale Next Generation Sequencing data

Cancer is driven by the acquisition of somatic DNA lesions. Distinguishing the early driver mutations from subsequent passenger mutations is key to molecular sub-typing of cancers, and the discovery of novel biomarkers. The availability of genomics technologies (mainly wholegenome and exome sequencing, and transcript sampling via RNA-seq, collectively referred to as NGS) have fueled recent studies on somatic mutation discovery. However, the vision is challenged by the complexity, redundancy, and errors in genomic data, and the difficulty of investigating the proteome using only genomic approaches. Recently, combination of proteomic and genomic technologies are increasingly employed. However, the complexity and redundancy of NGS data remains a challenge for proteogenomics, and various trade-offs must be made to allow for the searches to take place. This paperprovides a discussion of two such trade-offs, relating to large database search, and FDR calculations, and their implication to cancer proteogenomics. Moreover, it extends and develops the idea of a unified genomic variant database that can be searched by any mass spectrometry sample. A total of 879 BAM files downloaded from TCGA repository were used to create a 4.34 GB unified FASTA database which contained 2,787,062 novel splice junctions, 38,464 deletions, 1105 insertions, and 182,302 substitutions. Proteomic data from a single ovarian carcinoma sample (439,858 spectra) was searched against the database. By applying the most conservative FDR measure, we have identified 524 novel peptides and 65,578 known peptides at 1% FDR threshold. The novel peptides include interesting examples of doubly mutated peptides, frame-shifts, and non-sample-recruited mutations, which emphasize the strength of our approach.

59 BASIC BIOLOGICAL SCIENCES↗

Investigation of the Mechanical Properties of GdBa{sub 2}Cu{sub 3}O{sub 7−δ} Added with Nanosized Ferrites ZnFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} Using Ultrasonic Measurement

Recently, there is much interest in studying the effect of nanosized ferrites addition on high- T{sub c} superconductors. However, little information is available on the mechanical properties. We have investigated the effect of (CoFe{sub 2}O{sub 4}){sub x} and (ZnFe{sub 2}O{sub 4}){sub x} nanosized ferrites with 0.01 ≤ x ≤ 0.40 on the mechanical properties of the high- T{sub c} superconducting compound GdBa{sub 2}Cu{sub 3}O{sub 7−δ} (Gd-123) prepared by the conventional solid-state reaction technique. Elastic parameters including shear modulus (G), bulk modulus (B), and Young’s modulus (E) of all samples were inspected using ultrasonic measurements and compared with Vickers microhardness results. Furthermore, the porosity of the samples was investigated and correlated to Young’s modulus, which was corrected to zero porosity using different models. The corrected values were correlated with Vickers microhardness. Moreover, the Debye temperature (θ{sub D}) and the electron-phonon coupling factor (λ) were also determined as a function of x. We observed that the different nanoparticles addition has influenced the Gd-123 compound differently. For (ZnFe{sub 2}O{sub 4}){sub x} added samples, the mechanical properties and Debye temperature improved up to x = 0.06, then deteriorated with further addition. However, (CoFe{sub 2}O{sub 4}){sub x} addition improved the mechanical properties for all samples with x up to 0.40. We found that the proportionality constant between the corrected values of E and H{sub v} and G and H{sub v} are strongly dependent on the porosity corrections and the kind of superconducting material. This indicates that the widely used formula E = 81.96 H{sub v} may not be valid for all types of superconducting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Early season prediction of within-field crop yield variability by assimilating CubeSat data into a crop model

Accurate early season predictions of crop yield at the within-field scale can be used to address a range of crop production, management, and precision agricultural challenges. While the remote sensing of within-field insights has been a research goal for many years, it is only recently that observations with the required spatio-temporal resolutions, together with efficient assimilation methods to integrate these into modeling frameworks, have become available to advance yield prediction efforts. Here we explore a yield prediction approach that combines daily high-resolution CubeSat imagery with the APSIM crop model. The approach employs APSIM to train a linear regression that relates simulated yield to simulated leaf area index (LAI). That relationship is then used to identify the optimal regression date at which the LAI provides the best prediction of yield: in this case, approximately 14 weeks prior to harvest. Instead of applying the regression on satellite imagery that is coincident, or closest to, the regression date, our method implements a particle filter that integrates CubeSat-based LAI into APSIM to provide end-of-season high-resolution (3 m) yield maps weeks before the optimal regression date. The approach is demonstrated on a rainfed maize field located in Nebraska, USA, where suitable collections of both imagery and in-situ data were available for assessment. The procedure does not require in-field data to calibrate the regression model, with results showing that even with a single assimilation step, it is possible to provide yield estimates with good accuracy up to 21 days before the optimal regression date. Yield spatial variability was reproduced reasonably well, with a strong correlation to independently collected measurements (R 2 = 0.73 and rRMSE = 12%). When the field averaged yield was compared, our approach reduced yield prediction error from 1 Mg/ha (control case based on a calibrated APSIM model), to 0.5 Mg/ha (using satellite imagery alone), and then to 0.2 Mg/ha (results with assimilation up to three weeks prior to the optimal regression date). Such a capacity to provide spatially explicit yield predictions early in the season has considerable potential to enhance digital agricultural goals and improve end-of-season yield predictions.

54 ENVIRONMENTAL SCIENCES↗

Thermodynamic Modeling and Experimental Study of the Fe-Cr-Zr System

Wide applications of zircaloys, stainless steels and their interactions in nuclear reactors require the knowledge on phase stability and thermodynamic property of the Fe-Cr-Zr system. This knowledge is also important to develop new Zr-contained Fe-Cr ferritic steels. This work aims at developing thermodynamic models for describing phase stability and thermodynamic property of the Fe-Cr-Zr system using the Calphad approach coupled with experimental study. Thermodynamic descriptions of the Fe-Cr and Cr-Zr systems were either directly adopted or slightly modified from literature. The Fe-Zr system has been remodeled to accommodate recent ab-initio calculation of formation enthalpies of various Fe-Zr compounds. Reliable ternary experimental data and thermodynamic models were mainly available in the Zr-rich region. Therefore, selected ternary alloys located in the vicinity of the eutectic valley of (Fe,Cr,Zr) and (Fe,Cr)2Zr laves phase in the Fe-rich region have been experimentally investigated in this study. Microstructure has been examined by using scanning electron microscope, energy-dispersive Xray spectroscopy and X-ray diffraction. These experimental results, along with the literature data were then used to develop thermodynamic models for phases in the Fe-Cr-Zr system. Calculated phase equilibria and thermodynamic properties of the ternary system yield satisfactory agreements with available experimental data, which gives the confidence to use these models as building blocks for developing a Zr, Fe and Cr contained multicomponent thermodynamic database for broader applications in nuclear reactors.

Yang, Ying↗

Constraining baryon annihilation in the hadronic phase of heavy-ion collisions via event-by-event fluctuations

We point out that the variance of net-baryon distribution normalized by the Skellam distribution baseline, κ 2 [$B-\overline{B}$]/$\langle B+\overline{B} \rangle$, is sensitive to the possible modification of (anti)baryon yields due to $B\overline{B}$ annihilation in the hadronic phase. The corresponding measurements can thus place stringent limits on the magnitude of the $B\overline{B}$ annihilation and its inverse reaction. We perform Monte Carlo simulations of the hadronic phase in Pb-Pb collisions at the LHC via the recently developed subensemble sampler + UrQMD afterburner and show that the effect survives in net-proton fluctuations, which are directly accessible experimentally. The available experimental data of the ALICE Collaboration on net-proton fluctuations disfavors a notable suppression of (anti)baryon yields in $B\overline{B}$ annihilations predicted by the present version of UrQMD if only global baryon conservation is incorporated. On the other hand, the annihilations improve the data description when local baryon conservation is imposed. The two effects can be disentangled by measuring κ 2 [$B-\overline{B}$]/$\langle B+\overline{B} \rangle$, which at the LHC is notably suppressed by annihilations but virtually unaffected by baryon number conservation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Toward the Minimal Floating Operation Count Cholesky Decomposition of Electron Repulsion Integrals

As quantum chemistry calculations deal with molecular systems of increasing size, the memory requirement to store electron-repulsion integrals (ERIs) greatly outpaces the physical memory available in computing hardware. Here, the Cholesky decomposition of ERIs provides a convenient yet accurate technique to reduce the storage requirement of integrals. Recent developments of a two-step algorithm have drastically reduced the memory operation (MOP) count, leaving the floating operation (FLOP) count as the last frontier of cost reduction in the Cholesky ERI algorithm. In this report, we introduce a dynamic integral tracking, reusing, and compression/elimination protocol embedded in the two-step Cholesky ERI method. Benchmark studies suggest that this technique becomes particularly advantageous when the basis set consists of many computationally expensive high-angular-momentum basis functions. With this dynamic ERI improvement, the Cholesky ERI approach proves to be a highly efficient algorithm with minimal FLOP and MOP count.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a Thermophysical Properties Model for Flowsheet Simulation of Biomass Pyrolysis Processes

A properties model was developed for use in commercial process simulators to model pyrolysis of lignocellulosic biomass. The component list was chosen to enable process simulations based on a recently published lumped pyrolysis kinetics model. Since many of the compounds involved in pyrolysis are not found in simulator databanks, estimation based on available literature data was used to establish missing parameters. Standard solid enthalpy of formation, solid heat capacity, and solid density estimates calculated from the limited experimental data available were prepared for six biomass constituents and nine intermediate and end-products of their pyrolysis. Ideal gas enthalpy of formation and heat capacity, critical property, and vapor pressure estimates were prepared for another four pyrolysis end-products and one biomass component. The estimates were all validated against the closest available experimental data in the literature. The addition of these new components and properties allows thermodynamically rigorous simulation of lumped biomass pyrolysis reactions with accurate energy balances. Furthermore enthalpies of reaction calculated from the properties model were compared with reported reaction enthalpies for the same lumped biomass pyrolysis reactions and found to be in general agreement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of irradiation effects in precipitate hardened aluminum using nonlinear ultrasonic principles (in-situ)

Currently nuclear power plants are reaching the end of their initial design life. Yet, in order to meet the energy demands, twenty year extensions have been granted to many nuclear reactor facilities. These extensions will be ending by the year 2035, leaving a large gap in the available energy supply. In order to extend the life of these facilities it will imperative to develop techniques capable detecting damage in the aging nuclear facilities. However, the high temperature and high neutron flux environment limits the materials available for use in the nuclear reactor. Because of this limitation little NDE based inspection has been implemented in high radiation environments. Yet recent developments in the understanding of Aluminum Nitride (AlN) piezoelectric sensors high temperature and radiation dependent behavior have opened the door for in-situ experimentation. An experiment was designed to monitor the propagation of an ultrasonic wave in a precipitate hardened aluminum specimen while being subjected to radiation at the Pennsylvania State Universities Breazeale Reactor. Measurements of harmonic generation were made up to 1.85x10{sup 18} fluence with significant spectral difference between the pre-irradiated state and the post irradiated state. The connection between micro-structural material changes and harmonic measurements are addressed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Experimental analysis of a novel and low-cost pin photodiode dosimetry system for diagnostic radiology

Silicon PIN photodiode has recently found broad and exciting applications in the ionizing radiation dosimetry. In this study a compact and novel dosimetry system using a commercially available PIN photodiode (BPW34) has been experimentally tested for diagnostic radiology. The system was evaluated with clinical beams routinely used for diagnostic radiology and calibrated using a secondary reference standard. Measured dose with PIN photodiode (Air Kerma) varied from 10 to 430 μGy for tube voltages from 40 to 100 kVp and tube current from 0.4 to 40 mAs. The minimum detectable organ dose was estimated to be 10 μGy with 20% uncertainty. Results showed a linear correlation between the PIN photodiode readout and dose measured with standard dosimeters spanning doses received. The present dosimetry system having advantages of suitable sensitivity with immediate readout of dose values, low cost, and portability could be used as an alternative to passive dosimetry system such as thermoluminescent dosimeter for dose measurements in diagnostic radiology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Crystallography of Reactive Intermediates

Metal–ligand (M–L) multiply bonded complexes hold a central place in inorganic chemistry and catalysis: From fundamental and historical perspectives, these species have played a critical role in the articulation of important bonding principles (i.e. the vanadyl ion in the development of molecular orbital theory); from a practical perspective, these species are critical intermediates in a variety of chemical reactions (i.e. N 2 and O 2 reduction, H 2 O oxidation, and C–H functionalization). For many high-valent, early metal complexes, overlap of ligand-based electrons with vacant π-symmetry orbitals leads to strong M–L multiple bonds. The stability of these species enables straightforward characterization with a suite of standard spectroscopic and diffraction-based experiments. Mid- and late-transition metal complexes, with attendant higher d-electron counts, often support more reactive M–L multiply bonded fragments. The reactivity of these species simultaneously renders them attractive intermediates for catalysis but challenging synthetic targets to observe and characterize. A number of important strategies have been advanced to enable experimental characterization of mid- to late-metal–ligand multiply bonded species. Synthetic manipulation of the coordination geometry and ligand donicity, as well as introduction of sterically encumbering ligands, have each emerged as powerful methods to tame the inherent reactivity of kinetically labile M–L multiple bonds. While these efforts have resulted in families of well-characterized complexes and provided critical insights regarding structure and bonding, the synthetic derivatization required to stabilize M–L fragments of interest often obviates the substrate functionalization activity relevant to catalysis. Photochemical synthesis of reactive species provides a conceptually attractive strategy to generate reactive M–L fragments under conditions compatible with time-resolved or cryogenic steady-state characterization, and photogeneration has enabled observation of a number of reactive M–L fragments. The suite of tools available to characterize photogenerated reactive species is often more limited than typical for kinetically stabilized complexes and structural characterization is typically not possible. Recently, photocrystallographic experiments, in which reactive M–L multiply bonded intermediates are generated within single-crystal matrices, have been advanced as a strategy to interrogate the structures of reactive intermediates in C–H functionalization. Lastly, this Comment describes the historical antecedents to these experiments, highlights examples of photocrystallographic characterization of reactive intermediates, and discusses future opportunities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE LUMINOSITIES OF PROTOSTARS IN THE SPITZER c2d AND GOULD BELT LEGACY CLOUDS

Motivated by the long-standing 'luminosity problem' in low-mass star formation whereby protostars are underluminous compared to theoretical expectations, we identify 230 protostars in 18 molecular clouds observed by two Spitzer Space Telescope Legacy surveys of nearby star-forming regions. We compile complete spectral energy distributions, calculate L{sub bol} for each source, and study the protostellar luminosity distribution. This distribution extends over three orders of magnitude, from 0.01 L{sub Sun} to 69 L{sub Sun }, and has a mean and median of 4.3 L{sub Sun} and 1.3 L{sub Sun }, respectively. The distributions are very similar for Class 0 and Class I sources except for an excess of low luminosity (L{sub bol} {approx}< 0.5 L{sub Sun }) Class I sources compared to Class 0. 100 out of the 230 protostars (43%) lack any available data in the far-infrared and submillimeter (70 {mu}m <{lambda} < 850 {mu}m) and have L{sub bol} underestimated by factors of 2.5 on average, and up to factors of 8-10 in extreme cases. Correcting these underestimates for each source individually once additional data becomes available will likely increase both the mean and median of the sample by 35%-40%. We discuss and compare our results to several recent theoretical studies of protostellar luminosities and show that our new results do not invalidate the conclusions of any of these studies. As these studies demonstrate that there is more than one plausible accretion scenario that can match observations, future attention is clearly needed. The better statistics provided by our increased data set should aid such future work.

79 ASTRONOMY AND ASTROPHYSICS↗

Probing Red Blood Cell Mechanics, Rheology and Dynamics with a Two-Component Multi-scale Model

This study is partially motivated by the validation of a new two-component multi-scale cell model we developed recently that treats the lipid bilayer and the cytoskeleton as two distinct components.Here, the whole cell model is validated and compared against several available experiments that examine red blood cell (RBC) mechanics, rheology and dynamics. First, we investigated RBC deformability in a microfluidic channel with a very small cross-sectional area and quantified the mechanical properties of the RBC membrane. Second, we simulated twisting torque cytometry and compared predicted rheological properties of the RBC membrane with experimental measurements. Finally, wemodelled the tank-treading (TT) motion of a RBC in a shear flow and explored the effect of channel width variation on the TT frequency. We also investigated the effects of bilayer–cytoskeletal interactions on these experiments and our simulations clearly indicated that they play key roles in the determination of cell membrane mechanical, rheological and dynamical properties. These simulations serve as validation tests and moreover reveal the capabilities and limitations of the new whole cell model.

Li, Xuejin↗

Improving I/O Throughput with PRIMACY: Preconditioning ID-Mapper for Compressing Incompressibility

The ability to efficiently handle massive amounts of data is necessary for the continuing development towards exascale scientific data-mining applications and database systems. Unfortunately, recent years have shown a growing gap between the size and complexity of data produced from scientific applications and the limited I/O bandwidth available on modern high-performance computing systems. Utilizing data compression in order to lower the degree of I/O activity offers a promising means to addressing this problem. However, the standard compression algorithms previously explored for such use offer limited gains on both the end-to-end throughput and storage fronts. In this paper, we introduce an in-situ compression scheme aimed at improving end-to-end I/O throughput as well as reduction of dataset size. Our technique, PRIMACY (Preconditioning Id-MApper for Compressing incompressibility), acts as a preconditioner for standard compression libraries by modifying representation of original floating-point scientific data to increase byte-level repeatability, allowing standard loss less compressors to take advantage of their entropy-based byte-level encoding schemes. We additionally present a theoretical model for compression efficiency in high-performance computing environments and evaluate the efficiency of our approach via comparative analysis. Based on our evaluations on 20 real-world scientific datasets, PRIMACY achieved up to 38% and 22% improvements upon standard end-to-end write and read throughputs respectively in addition to a 25% increase in compression ratios paired with 3-to-4-fold improvement in both compression and decompression throughput over general purpose compressors.

Computer Science↗

Good Practices for High-Quality Scientific Computing

Experimental and observational sciences have developed robust practices for conducting experiments, maintaining their instruments, and record keeping for provenance. Computational science has only recently begun to confront the issue of quality of their instrument, the software, and the credibility of their scientific output. Most of the available literature in software engineering relates to enterprise software. While it can inform practices in scientific software, adjustments are usually needed. From time to time quality conscious practitioners have published collections of best practices for scientific software. Here, this article provides one more such list but with updated suggestions, motivated by the need to keep up with the rapid changes in the computing industry.

97 MATHEMATICS AND COMPUTING↗

Three Confinement Systems—Spherical Tokamak, Standard Tokamak, and Stellarator: A Comparison of Key Component Cost Elements

Since the 1950s “next-step” fusion devices and power plant studies have been developed for a number of magnetic confinement systems but an open question remains: can a magnetic fusion device be simplified to the point where it will be cost competitive and operate with high availability? Concept designs based on the ARIES advanced tokamak, spherical tokamak (ST), and the quasi-axisymmetric (QAS) stellarator option have progressed in recent years through a series of Princeton Plasma Physics Laboratory (PPPL) studies with an underlying intent to improve the engineering feasibility of each, giving special attention to concepts that simplify the device configuration and improve maintenance features. For the ST option, design details centered on a 3-m Fusion Nuclear Science Facility that evolved to incorporate vertical maintenance, high temperature superconductor magnets, a small inboard duel coolant lead lithium blanket, and a liquid metal divertor. In collaboration with the Korean fusion demonstration reactor (K-DEMO) and CFETR concept study teams the tokamak design has evolved to increase plasma component access within a vertical maintenance approach using enlarged toroidal field coils incorporating a low- and high-field Nb 3 Sn winding pack that provide a peak field of 16 T. A recent PPPL stellarator study focused on simplifying the stellarator winding topology to improve access to in-vessel components; combining coil optimization with winding surfaces that incorporated geometry constraints specified by engineering. This paper centered on a 1000-MW power plant design with a tokamak like vertical maintenance scheme that allows access to remove large internal blanket sectors. Results of three confinement studies (PPPL developed ST, K-DEMO, and QAS stellarator) will be presented to highlight concepts that simplify each device configuration and improved their maintenance features. Furthermore, scaling each option to a common 1000-MW net electric power plant mission allows comparisons to be made of key cost elements such as the size of major core components, sizing of the reactor hall, or external facilities needed to handle and store activated in-vessel components.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimization approaches to volumetric modulated arc therapy planning

Volumetric modulated arc therapy (VMAT) has found widespread clinical application in recent years. A large number of treatment planning studies have evaluated the potential for VMAT for different disease sites based on the currently available commercial implementations of VMAT planning. In contrast, literature on the underlying mathematical optimization methods used in treatment planning is scarce. VMAT planning represents a challenging large scale optimization problem. In contrast to fluence map optimization in intensity-modulated radiotherapy planning for static beams, VMAT planning represents a nonconvex optimization problem. In this paper, the authors review the state-of-the-art in VMAT planning from an algorithmic perspective. Different approaches to VMAT optimization, including arc sequencing methods, extensions of direct aperture optimization, and direct optimization of leaf trajectories are reviewed. Their advantages and limitations are outlined and recommendations for improvements are discussed.

07 ISOTOPE AND RADIATION SOURCES↗