Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “predictability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Hodographic approach to predicting inelastic strain at high temperature

An experimental study of the effect of continuous and discontinuous changes in strain rate on the relationship among strain rate, strain, and stress is described. Data from Udimet 700 in tension at 925 C were used in order to relate cyclic tensile creep to the monotonic properties of the material by means of the hodograph. The nature of modifications caused to the hodograph by discontinuous variation of the strain rate was determined from tests. Reloading at discontinuous strain rate caused reactivation of primary creep. A simple method, based on monotonic material properties, is proposed for predicting cyclic tensile creep response. Preliminary results of cyclic tests agree with predicted response.

Berkovits, A.↗
NASA NTRS1971

Radiolysis of water in sealed aluminum capsules - Its prediction and inhibition.

This report presents the results of an investigation into methods of inhibiting the radiolysis of water in sealed aluminum capsules in the Plum Brook Reactor of NASA. Experimental design techniques are employed to identify the measured effects of eight variables and their interactions which control water decomposition and the resultant pressure buildup. Multiple regression analyses are used to develop predictive models for the pressure rise observed in an inpile capsule system. Predictive equations are derived for pressure rise due to the radiolysis of water with air as a cover gas or with helium cover gas containing air as an impurity or mixtures of hydrogen, oxygen, and nitrogen as impurities. Radiation induced reaction products of nitrogen and oxygen are identified as the key to radiolysis behavior. The prevention of radiolysis depends on the exclusion of air or mixtures of nitrogen and oxygen from the system. Pure inert gases, helium, neon, and argon prove to be satisfactory radiolysis inhibitors. This is demonstrated for helium by inpile tests lasting up to 14 days (one reactor cycle) in the Plum Brook Reactor.

Sheibley, D. W.↗
NASA NTRS1972

Review of sonic-boom generation theory and prediction methods.

The prediction techniques reviedi he present paper permit the calculation of sonic booms produced by rather complex conventional supersonic aircraft designs performing level nonaccelerated flight in a quiet atmosphere. Basic concepts of supersonic flow analysis, for representation of an airplane as a linear distribution of disturbances and for determination of the resultant pressure field complete with shocks, are outlined. Numerical techniques for implementation of the theory are discussed briefly, and examples of the correlation of theory with experimental data from wind tunnel and flight tests are presented. Special attention is given to presentation of a simplified method for rapid 'first-cut' estimation of farfield bow-shock overpressure. Finally, some problems encountered in attempts at applying the prediction techniques for the nearfield at high supersonic Mach numbers are recognized, and the need for further refinement of present techniques or the development of new systems is discussed.

Carlson, H. W.↗
NASA NTRS1972

A model for predicting aortic dynamic response to -G sub z impact acceleration.

A steady state dynamic response model for the radial motion of the aorta is developed from in vivo pressure-displacement and nerve stimulation experiments on canines. The model represented by a modified Van der Pol wave motion oscillator closely predicts steady state and perturbed response results. The applicability of the steady state canine aortic model to tailward acting impact forces is studied by means of the perturbed phase plane of the oscillator. The backflow through the aortic arch resulting from a specified acceleration-time profile is computed and an analysis for predicting the forced motion aortic response is presented.

Advani, S. H.↗
NASA NTRS1972

Prediction of pressure during evacuation of multilayer insulation.

Description of an improved analytical procedure for predicting the pressure time history during evacuation of multilayer-insulation thermal-protection systems. To evaluate the performance of the proposed analysis and to demonstrate its usefulness as a design tool, a comparison is presented of the experimentally measured and predicted evacuation pressure histories for a laboratory-scale model multilayer insulation blanket.

Glassford, A. P. M.↗
NASA NTRS1972

Prediction of thermal fluxes to very blunt planetary entry vehicles by the integral method.

An integral method which has previously been applied to the hypersonic blunt body thermal problem is improved and extended to obtain downstream flux predictions and to improve stagnation predictions. To account for the effect of downstream conditions propagated upstream through the subsonic shock layer region, the normal momentum equation is solved simultaneously with the other governing conservation equations. The effects of viscosity, conduction, dissociation and ionization, nongray radiation, surface emissivity, and ablation are included. Illustrative results are presented for body models of hemispheres and a continuous curvature body which closely approximates a hemispherically blunted wide angle (60 half angle) cone. The atmospheric models are air and a 50% Co2-50% N mixture at low densities, which should be representative of the Martian or Venusian atmospheres.

Burns, R. K.↗
NASA NTRS1972

Analytic prediction of dynamic stall characteristics.

A new approach is presented for solving the problem of predicting dynamic stall characteristics. In this approach, the unsteady aerodynamic characteristics are related theoretically to static aerodynamic characteristics which are readily available for a great number of airfoil shapes. Using these static experimental data as an input, the developed analytical method predicts dynamic stall characteristics that are in good agreement with available experimental data. The analysis is also extended to include frequency and amplitude modulation effects.

Ericsson, L. E.↗
NASA NTRS1973

Nomograph for prediction of RF-breakdown voltages

Information in nomograph is derived from data obtained from RF-breakdown tests on components of uniform and nonuniform geometry. Nomograph also can be used in design work to predict breakdown margins; if operational minimum pressure is established giving minimum value on nomograph, minimum breakdown voltage consistent with allowed value can be predicted.

Hickernell, F. S.↗
NASA NTRS1972

The influence of a prediction display on the quasi-linear describing function and remnant measured with an adaptive analog-pilot in a closed loop

The effect of a prediction display on the human transfer characteristics is explained with the aid of a quasi-linear model. The prediction display causes an increase of the gain factor and the lead factor, a diminishing of the lag factor and a decrease of the remnant. Altogether, these factors yield a smaller mean square value of the control deviation and a simultaneous decrease of the mean square value of the stick signal.

Dey, D.↗
NASA NTRS1972

A prediction model for lift-fan simulator performance

The performance characteristics of a model VTOL lift-fan simulator installed in a two-dimensional wing are presented. The lift-fan simulator consisted of a 15-inch diameter fan driven by a turbine contained in the fan hub. The performance of the lift-fan simulator was measured in two ways: (1) the calculated momentum thrust of the fan and turbine (total thrust loading), and (2) the axial-force measured on a load cell force balance (axial-force loading). Tests were conducted over a wide range of crossflow velocities, corrected tip speeds, and wing angle of attack. A prediction modeling technique was developed to help in analyzing the performance characteristics of lift-fan simulators. A multiple linear regression analysis technique is presented which calculates prediction model equations for the dependent variables.

Yuska, J. A.↗
NASA NTRS1972

Applications of remote sensing to stream discharge predictions

A feasibility study has been initiated on the use of remote earth observations for augmenting stream discharge prediction for the design and/or operation of major reservoir systems, pumping systems and irrigation systems. The near-term objectives are the interpolation of sparsely instrumented precipitation surveillance networks and the direct measurement of water loss by evaporation. The first steps of the study covered a survey of existing reservoir systems, stream discharge prediction methods, gage networks and the development of a self-adaptive variation of the Kentucky Watershed model, SNOPSET, that includes snowmelt. As a result of these studies, a special three channel scanner is being built for a small aircraft, which should provide snow, temperature and water vapor maps for the spatial and temporal interpolation of stream gages.

Krause, F. R.↗
NASA NTRS1973

Life prediction of turbine components: On-going studies at the NASA Lewis Research Center

An overview is presented of the many studies at NASA-Lewis that form the turbine component life prediction program. This program has three phases: (1) development of life prediction methods for major failure modes through materials studies, (2) evaluation and improvement of these methods through a variety of burner rig studies on simulated components in research engines and advanced rigs. These three phases form a cooperative, interdisciplinary program. A bibliography of Lewis publications on fatigue, oxidation and coatings, and turbine engine alloys is included.

Spera, D. A.↗
NASA NTRS1973

Simplified procedures for correlation of experimentally measured and predicted thrust chamber performance

Thrust chamber performance is evaluated in terms of an analytical model incorporating all the loss processes that occur in a real rocket motor. The important loss processes in the real thrust chamber were identified, and a methodology and recommended procedure for predicting real thrust chamber vacuum specific impulse were developed. Simplified equations for the calculation of vacuum specific impulse are developed to relate the delivered performance (both vacuum specific impulse and characteristic velocity) to the ideal performance as degraded by the losses corresponding to a specified list of loss processes. These simplified equations enable the various performance loss components, and the corresponding efficiencies, to be quantified separately (except that interaction effects are arbitrarily assigned in the process). The loss and efficiency expressions presented can be used to evaluate experimentally measured thrust chamber performance, to direct development effort into the areas most likely to yield improvements in performance, and as a basis to predict performance of related thrust chamber configurations.

Powell, W. B.↗
NASA NTRS1973

Prediction of shuttle vehicle damping from component test results

A dissipative energy approach for predicting the damping of four-component space shuttle model by means of modal parameters obtained from tests of the individual components is presented. A relationship between modal damping energy per cycle and peak strain (or kinetic) energy is first determined empirically from test data for each component. Undamped analytical models of each component are also developed, and combined into a system model from which are obtained modal kinetic (or strain) energies for its respective modes. These data are then used with the empirical damping curves to apportion the proper amount of damping energy to each component in a combined system mode, and thereby allow a prediction of damping ratio. Some discrepancies in results are noted to occur because of incomplete modeling of connecting link mechanisms and anomalies in modal responses.

Kana, D. D.↗
NASA NTRS1972

Demonstration of the use of ADAPT to derive predictive maintenance algorithms for the KSC central heat plant

The Avco Data Analysis and Prediction Techniques (ADAPT) were employed to determine laws capable of detecting failures in a heat plant up to three days in advance of the occurrence of the failure. The projected performance of algorithms yielded a detection probability of 90% with false alarm rates of the order of 1 per year for a sample rate of 1 per day with each detection, followed by 3 hourly samplings. This performance was verified on 173 independent test cases. The program also demonstrated diagnostic algorithms and the ability to predict the time of failure to approximately plus or minus 8 hours up to three days in advance of the failure. The ADAPT programs produce simple algorithms which have a unique possibility of a relatively low cost updating procedure. The algorithms were implemented on general purpose computers at Kennedy Space Flight Center and tested against current data.

Hunter, H. E.↗
NASA NTRS1972

Analytical prediction of digital signal crosstalk of FCC

The results are presented of study effort whose aim was the development of accurate means of analyzing and predicting signal cross-talk in multi-wire digital data cables. A complete analytical model is developed n + 1 wire systems of uniform transmission lines with arbitrary linear boundary conditions. In addition, a minimum set of parameter measurements required for the application of the model are presented. Comparisons between cross-talk predicted by this model and actual measured cross-talk are shown for a six conductor ribbon cable.

Belleisle, A. P.↗