Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “power processing unit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Life-cycle analysis of fuels from post-use non-recycled plastics

Plastic-to-fuel (PTF) technology uses pyrolysis to convert plastic waste—especially non-recycled plastics (NRP)—into ultra-low sulfur diesel (ULSD) fuel. To assess the potential energy and environmental benefits associated with PTF technology, we calculated the energy, water consumption, and greenhouse gas emissions of NRP-derived ULSD and compared the results to those metrics for conventional ULSD fuel. For these analyses, we used the Greenhouse gases, Regulated Emissions and Energy use in Transportation (GREET®) model. Five companies provided pyrolysis process product yields and material and energy consumption data. Co-products of the process included char and fuel gas. Char can be landfilled, which, per the company responses, is the most common practice for this co-product, or it may be sold as an energy product. Fuel gas can be combusted to internally generate process heat and electricity. Sensitivity analyses investigated the influence of co-product handling methodology, product yield, electric grid composition, and assumed efficiency of char combustion technology on life-cycle greenhouse gas emissions. The sensitivity analysis indicates that the GHG emissions would likely be reduced up to 14% when it is compared to conventional ULSD, depending on the co-product treatment method used. NRP-derived ULSD fuel could therefore be considered at a minimum carbon neutral with the potential to offer a modest GHG reduction. Moreover, this waste-derived fuel had 58% lower water consumption and up to 96% lower fossil fuel consumption than conventional ULSD fuel in the base case. In addition to the comparison of PTF fuels with conventional transportation fuels, we also compare the results with alternative scenarios for managing NRP including power generation and landfilling in the United States.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rheology improvement for silicon nitride and resin slurries for vat photopolymerization printing and sintering

This work presents the formulation, rheological characterization, and sintering of silicon nitride (Si₃N₄) slurries for vat photopolymerization (VPP) using digital light processing (DLP). Bimodal Si₃N₄ powder was dispersed into commercial photopolymer resin using two different dispersants with opposing effects on surface charge, resulting in varied slurry stability and flow behavior. Slurries were engineered to exhibit shear-thinning behavior suitable for VPP, and their flow properties were quantified using a power-law fluid model. The formulations achieved cure depths of approximately 40 µm and enabled printing of green bodies. Post-processing included thermal debinding and liquid-phase sintering, yielding primarily β-Si₃N₄ with a minor Y-Si-Al-O-N glass phase. The sintered parts reached ~85% of theoretical density and demonstrated a flexural strength of ~330 MPa. Microstructural analysis revealed closed porosity along with some defects related to powder agglomeration and interlayer adhesion. These findings provide insights into slurry formulation strategies for additive manufacturing of high-performance non-oxide ceramics.

Aerospace engineering↗

Design of radiation resistant metallic multilayers for advanced nuclear systems

Helium implantation from transmutation reactions is a major cause of embrittlement and dimensional instability of structural components in nuclear energy systems. Development of novel materials with improved radiation resistance, which is of the utmost importance for progress in nuclear energy, requires guidelines to arrive at favorable parameters more efficiently. Here, we present a methodology that can be used for the design of radiation tolerant materials. We used synchrotron X-ray reflectivity to nondestructively study radiation effects at buried interfaces and measure swelling induced by He implantation in Cu/Nb multilayers. The results, supported by transmission electron microscopy, show a direct correlation between reduced swelling in nanoscale multilayers and increased interface area per unit volume, consistent with helium storage in Cu/Nb interfaces in forms that minimize dimensional changes. In addition, for Cu/Nb layers, a linear relationship is demonstrated between the measured depth-dependent swelling and implanted He density from simulations, making the reflectivity technique a powerful tool for heuristic material design.

36 MATERIALS SCIENCE↗

Human-Centered and Explainable Artificial Intelligence in Nuclear Operations

Nuclear power plants in the United States are critical to the nation’s energy security, accounting for 20% of all electricity produced for the power grid. As energy needs grow, 100 gigawatts of additional nuclear power will be necessary by 2050, more than double the current capacity. Realizing this target requires cutting-edge technology like artificial intelligence (AI) and machine learning (ML) that can bring about significant increases in the level of automation. Human-centered AI (HCAI) is a combination of human-centered design (human factors, human-in-the-loop, etc.) with AI/ML to help produce an efficient and reliable system with full consideration for human engagement. This paper provides a comprehensive and novel discussion of HCAI considerations in nuclear power, introducing unique applications for the existing fleet as well as new advanced reactor designs. We include real-life use cases of AI applications to work management processes at nuclear power sites and highlight lessons learned for HCAI.

Hall, Anna↗

A one-dimensional transient model of a single-stage, downward-firing entrained-flow gasifier

The integrated gasification combined cycle (IGCC) technology has emerged as an attractive alternative to conventional coal-fired power plant technology due to its higher efficiency and cleaner environmental performance especially with the option of CO{sub 2} capture and sequestration. The core unit of this technology is the gasifier whose optimal performance must be understood for efficient operation of IGCC power plants. This need has led a number of researchers to develop gasifier models of varying complexities. Whereas high-fidelity CFD models can accurately predict most key aspects of gasifier performance, they are computationally expensive and typically take hours to days to execute on high-performance computers. Therefore, faster one-dimensional (1D) partial differential equation (PDE)-based models are required for use in dynamic simulation studies, control system analysis, and training applications. A number of 1D gasifier models can be found in the literature, but most are steady-state and have limited application in the practical operation of the gasifier. As a result, 1D PDE-based dynamic models are needed to further study and predict gasifier performance under a wide variety of process conditions and disturbances. In the present study, a 1D transient model of a single-stage downward flow GE/Texaco-type gasifier has been developed. The model comprises mass, momentum and energy balances for the gas and solid phases. The model considers the initial gasification processes of water evaporation and coal devolatilization. In addition, the key heterogeneous and homogeneous chemical reactions have been modeled. The resulting time-dependent PDE model is solved using the well-known method of lines approach in Aspen Custom Modeler®, whereby the PDEs are discretized in the spatial domain and the resulting differential algebraic equations (DAEs) are then solved to obtain the transient response. The transient response of various gasifier performance parameters to certain disturbances commonly encountered in the real world operation of commercial IGCC plants will be presented. These disturbances include ramp and step changes in input variables such as coal flow rate, oxygen-to-coal ratio and water-to-coal ratio, among others. Comparison of gasifier model predictions to available dynamic data will also be discussed.

97 MATHEMATICS AND COMPUTING↗

DEVELOPMENT OF THE PRIEST RAPIDS TURBINE UPGRADE PROJECT

The Priest Rapids Dam is located on the Columbia River and is operated by Public Utility District No. 2 of Grant County, WA (GCPUD). In operation since 1959, GCPUD decided that a major upgrade was necessary. As with other hydroelectric facilities on the Columbia River, improving fish passage at Priest Rapids Dam is of great importance for salmon and steelhead populations in the Pacific Northwest. Consequently, GCPUD established the Priest Rapids Turbine Upgrade Project to extend the life of the units, increase efficiency and power production, and improve fish-passage. The Priest Rapids powerhouse is equipped with 10 vertical Kaplan turbines with runner diameters of 7.21 m operating under net heads varying from 18 m to 27 m. The scope of the project included a design competition involving three turbine manufacturers providing up to two designs for evaluation. Selection of the replacement design was determined by the lowest evaluated price based on model test results conducted at an independent laboratory (Ecole Polytechnique Federale de Lausanne in Lausanne Switzerland) and a biological performance score determined by a newly developed Biological Performance Assessment (BioPA) performed by Pacific Northwest National Laboratory in Richland, WA. In the paper, the hydraulic design challenges are reviewed, in addition to comparisons of designs evaluated during the competitive model test program and biological assessment. The paper also provides a description of the process followed by GCPUD, and how the evaluation criteria influenced the development and the finally selected solution.

CFD↗

Vehicle-Cycle Inventory for Type C School Buses & Intra-City Transit Buses

This report documents the new inventory incorporated into the Research and Development version of Greenhouse gases, Regulated Emissions, and Energy use in Technologies (R&D GREET) 2025 model for the vehicle cycle of Type C school buses and intracity transit buses. The transportation sector contributes significantly to the United States’ energy consumption and resultant emissions (EPA, 2025a). However, public transit plays an important role in mitigating these impacts because it consumes a relatively low amount of energy per passenger (Congressional Budget Office, 2022). Public transit is widely used in the United States; more than 500,000 school buses (EPA, 2025b) and ~75,000 service buses (American Public Transportation Association, 2025) operate in the nation. These are primarily internal combustion engine vehicles (ICEVs) powered by diesel. Original equipment manufacturers (OEMs) are making efforts to electrify U.S. bus fleets by using batteries as a propulsion system to replace internal combustion engines. Electrification can reduce tailpipe emissions, such as particulate matter (with a diameter ≤10 µm [PM 10 ] and with a diameter ≤2.5 µm [PM 2.5 ]) and nitrogen oxides (Jonas et al., 2025; Martinez and Samaras, 2024; EPA, 2025b; Wayne et al., 2009). Hence, any energy and emission impact analysis of public transit must consider both conventional ICEVs and upcoming electric vehicle (EV) options for the school and transit buses that dominate this landscape. To understand the detailed environmental impact profiles of ICEV and EV school and transit buses, it is necessary to conduct a thorough analysis covering both vehicle manufacturing and vehicle use stages. The current literature lacks a detailed vehicle-cycle inventory for school and transit buses, which makes this kind of comparison difficult. To overcome this gap, we developed a comprehensive vehicle-cycle model for school and transit buses in Argonne’s R&D GREET 2025 model. The model is flexible in handling user inputs for key assumptions, such as component weights and material compositions, upstream energy sources for material processing, and vehicle operating parameters, to understand their impacts on energy use and emissions for both school and transit buses. This report is organized as follows: Section 2 provides details on the modeling approach and vehicle specifications (weights and composition of different vehicle components, and vehicle operating parameters) for both school and transit buses. Section 3 provides details on vehicle assembly, disposal, and recycling (ADR) approaches for the two buses. Section 4 includes details about their incorporation into the R&D GREET model.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Generalized parton distributions and gravitational form factors at large momentum transfer

Within the soft collinear effective theory (SCET), we derive a factorization theorem which resums Sudakov logarithms (α s ln 2 ( –t)) n to all orders in the quark-in-quark generalized parton distribution (GPD) at large momentum transfer t, and perform a consistency check to one-loop. We show that the same Sudakov factor appears in the ‘Feynman’ contribution to the GPDs of the nucleon. Our result enables the resummation of all the large logarithms ln Q 2 and ln 2 t in exclusive processes with two hard scales Λ$^{2}_{QCD}$ ≪ |t| ≪ Q 2 . We also present a SCET power counting analysis of the Feynman contributions to the GPDs and show that the x-dependence of GPDs factorizes at large-t with controlled corrections. This in particular implies that any ratio of GPD moments such as the electromagnetic and gravitational form factors (GFF) is perturbatively calculable in this approximation. Furthermore, we identify a novel order α s power-law t-dependence in the GPD and the D-type GFF that will dominate over the standard order α$^{2}_{s}$ ‘leading twist’ asymptotic contribution in the phenomenologically relevant region of t.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Harnessing on-machine metrology data for prints with a surrogate model for laser powder directed energy deposition

In this study, we leverage the massive amount of multi-modal on-machine metrology data generated from Laser Powder Directed Energy Deposition (LP-DED) to construct a comprehensive surrogate model of the 3D printing process. By employing Dynamic Mode Decomposition with Control (DMDc), a data-driven technique, we capture the complex physics inherent in this extensive dataset. This physics-based surrogate model emphasizes thermodynamically significant quantities, enabling us to accurately predict key process outcomes. The model ingests 21 process parameters, including laser power, scan rate, and position, while providing outputs such as melt pool temperature, melt pool size, and other essential observables. Furthermore, it incorporates uncertainty quantification to provide bounds on these predictions, enhancing reliability and confidence in the results. We then deploy the surrogate model on a new, unseen part and monitor the printing process as validation of the method. Our experimental results demonstrate that the predictions align with actual measurements with high accuracy, confirming the effectiveness of our approach. Furthermore, this methodology not only facilitates real-time predictions but also operates at process-relevant speeds, establishing a basis for implementing feedback control in LP-DED.

Digital twins↗

Economic and environmental performance of biomass gasification for renewable natural gas production in the context of the U.S. natural gas supply

Bioenergy technologies offer potential for reducing greenhouse gas (GHG) emissions. One such promising technology is biomass gasification, which is the conversion of biomass into renewable natural gas (RNG) for use with a natural gas combined-cycle power generation system. However, the associated economic and emission effects need to be better understood to enable optimal decision-making and avoid missed opportunities for enhancing efficiency and increasing system circularity. This analysis explores opportunities to (1) decarbonize natural-gas-based systems and (2) leverage the extensive US natural gas infrastructure to mobilize biomass resources to achieve environmental and economic benefits. Here, in this analysis, the research team used a spatially explicit biomass logistics model (integrated with relevant biomass availability, technoeconomic analysis, and life cycle assessment information) to simulate economically optimal biomass allocation for RNG production and use for decarbonization in the United States. Results show that the United States has the potential to produce 9203 million GJ of RNG within the expected range of $\$$12–30/GJ. Further analyses tested the overall RNG production system's sensitivity to economic and emissions parameters of nine different processes. The sensitivity analysis results indicate that the median carbon abatement cost of RNG is most sensitive to changes in emissions associated with conversion processes and land use changes. These findings provide a deeper understanding of RNG's economic and emission potential for decision-making and guiding future research.

09 BIOMASS FUELS↗

Potential impacts of nanotechnology on energy transmission applications and needs.

The application of nanotechnologies to energy transmission has the potential to significantly impact both the deployed transmission technologies and the need for additional development. This could be a factor in assessing environmental impacts of right-of-way (ROW) development and use. For example, some nanotechnology applications may produce materials (e.g., cables) that are much stronger per unit volume than existing materials, enabling reduced footprints for construction and maintenance of electricity transmission lines. Other applications, such as more efficient lighting, lighter-weight materials for vehicle construction, and smaller batteries having greater storage capacities may reduce the need for long-distance transport of energy, and possibly reduce the need for extensive future ROW development and many attendant environmental impacts. This report introduces the field of nanotechnology, describes some of the ways in which processes and products developed with or incorporating nanomaterials differ from traditional processes and products, and identifies some examples of how nanotechnology may be used to reduce potential ROW impacts. Potential environmental, safety, and health impacts are also discussed.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Process Intensification and Scale-Up of a Continuous Enzymatic Hydrolysis and Separation Process

Combining separate unit operations into one where the best of each part can be maximized is one of the benefits of process intensification. An example is the combination of lignocellulosic biomass enzymatic hydrolysis with the downstream solid-liquid separation step to produce clarified sugars ready for fermentation or catalytic upgrading. The productivity and endpoint yield of enzymatic hydrolysis both enjoy the benefits of reduced feedback inhibition through the continuous removal of sugars by incorporating separations into the reactor. Likewise, the efficiency of recovering clarified sugars from the enzymatic hydrolysis slurry can be enhanced by operating separations equipment at steady-state conditions simultaneously with the continuously fed hydrolysis process. A key parameter that enables greater processing capacity while also raising the risks of failure is the solids loading or concentration. Higher solids loading allows for smaller reactor vessels and results in clarified sugars of higher concentration; however, required pumping power increases, reactor agitation may become ineffective, and membrane flux suffers. Feedstock material attributes influenced by upstream pretreatment must also be scrutinized more carefully: dilute-acid pretreated and deacetylated-and-disc-refined feedstocks exhibit different characteristics that affect agitation and pumping. The authors invite you to further explore the process science enabling the scale-up of this technology from conceptual work at the bench to pilot-scale industrially-relevant equipment where the challenges and solutions of integration and process optimization are expounded upon.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Gate-to-Grave Life Cycle Analysis Model of Saline Aquifer Sequestration of Carbon Dioxide [Slides]

A gate-to-grave life cycle analysis (LCA) model was created to quantify the environmental impacts of the various processes associated with saline aquifer sequestration. The following unit processes are accounted for in this analysis: site preparation, well construction, carbon dioxide sequestration operations, site monitoring, brine management, well closure, and land use. This analysis used an LCA approach for developing data and modeling saline aquifer sequestration. The energy and material flows for key processes within the gate-to-grave boundaries of the saline aquifer were calculated. These processes were then compiled in a model that scaled the flows between processes to arrive at an inventory of environmental burdens on a common basis (e.g., 1 tonne of carbon dioxide sequestered).

54 ENVIRONMENTAL SCIENCES↗

Radioisotope power source dose estimation tool (RPS-DET)

The purpose of this work is to develop a radioisotope power source dose estimation tool (RPS-DET) capable of rapidly predicting accurate neutron and gamma-ray flux/dose implications from various radioisotope power sources (RPSs). RPS-DET can use this information to calculate the flux/dose incident on or absorbed by nearby humans, materials, and electronics over a complex mission lifetime. This simulation tool uses a Matlab user interface to combine common geometry scenarios for traditional and new RPS design configurations to write a particle-transport simulation using Monte Carlo N-Particle (MCNP) 6, which provides results that are automatically post-processed for interactive analysis. The user defines the average age of the PuO2fuel, which determines the appropriate time-dependent gamma-ray and neutron spectra, along with the desired RPS and local environment for the simulation. Results for a given simulation are gamma-ray, neutron, and combined flux spectra, whole-body effective dose for humans, and absorbed dose in silicon for electronics. This work has been benchmarked against measurements of existing RPS units and has been determined to predict neutron and gamma flux, absorbed dose, and dose equivalent within 50% of simulation uncertainties.

Smith, Michael↗

Waste Coal Fines Reburn for NOx and Mercury Emission Reduction

Injection of coal-water slurries (CWS) made with both waste coal and bituminous coal was tested for enhanced reduction of NO{sub x} and Hg emissions at the AES Beaver Valley plant near Monaca, PA. Under this project, Breen Energy Solutions (BES) conducted field experiments on the these emission reduction technologies by mixing coal fines and/or pulverized coal, urea and water to form slurry, then injecting the slurry in the upper furnace region of a coal-fired boiler. The main focus of this project was use of waste coal fines as the carbon source; however, testing was also conducted using pulverized coal in conjunction with or instead of waste coal fines for conversion efficiency and economic comparisons. The host site for this research and development project was Unit No.2 at AES Beaver Valley cogeneration station. Unit No.2 is a 35 MW Babcock & Wilcox (B&W) front-wall fired boiler that burns eastern bituminous coal. It has low NO{sub x} burners, overfire air ports and a urea-based selective non-catalytic reduction (SNCR) system for NO{sub x} control. The back-end clean-up system includes a rotating mechanical ash particulate removal and electrostatic precipitator (ESP) and wet flue gas desulfurization (FGD) scrubber. Coal slurry injection was expected to help reduce NOx emissions in two ways: (1) Via fuel-lean reburning when the slurry is injected above the combustion zone. (2) Via enhanced SNCR reduction when urea is incorporated into the slurry. The mercury control process under research uses carbon/water slurry injection to produce reactive carbon in-situ in the upper furnace, promoting the oxidation of elemental mercury in flue gas from coal-fired power boilers. By controlling the water content of the slurry below the stoichiometric requirement for complete gasification, water activated carbon (WAC) can be generated in-situ in the upper furnace. As little as 1-2% coal/water slurry (heat input basis) can be injected and generate sufficient WAC for mercury capture. During July, August, and September 2007, BES designed, procured, installed, and tested the slurry injection system at Beaver Valley. Slurry production was performed by Penn State University using equipment that was moved from campus to the Beaver Valley site. Waste coal fines were procured from Headwaters Inc. and transported to the site in Super Sacks. In addition, bituminous coal was pulverized at Penn State and trucked to the site in 55-gallon drums. This system was operated for three weeks during August and September 2007. NO{sub x} emission data were obtained using the plant CEM system. Hg measurements were taken using EPA Method 30B (Sorbent Trap method) both downstream of the electrostatic precipitator and in the stack. Ohio Lumex Company was on site to provide rapid Hg analysis on the sorbent traps during the tests. Key results from these tests are: (1) Coal Fines reburn alone reduced NO{sub x} emissions by 0-10% with up to 4% heat input from the CWS. However, the NO{sub x} reduction was accompanied by higher CO emissions. The higher CO limited our ability to try higher reburn rates for further NO{sub x} reduction. (2) Coal Fines reburn with Urea (Carbon enhanced SNCR) decreased NO{sub x} emissions by an additional 30% compared to Urea injection only. (3) Coal slurry injection did not change Hg capture across the ESP at full load with an inlet temperature of 400-430 F. The Hg capture in the ESP averaged 40%, with or without slurry injection; low mercury particulate capture is normally expected across a higher temperature ESP because any oxidized mercury is thought to desorb from the particulate at ESP temperatures above 250 F. (4) Coal slurry injection with halogen salts added to the mixing tank increased the Hg capture in the ESP to 60%. This significant incremental mercury reduction is important to improved mercury capture with hot-side ESP operation and wherever hindrance from sulfur oxides limit mercury reduction, because the higher temperature is above sulfur oxide dew point interference.

01 COAL, LIGNITE, AND PEAT↗

Data and scripts associated with the manuscript "Organic Molecules are Deterministically Assembled in River Sediments"

This data package is associated with the publication "Organic Molecules are Deterministically Assembled in River Sediments" submitted to Scientific Reports (Stegen et al., 2024). The study applies community ecology methods to dissolved organic matter (DOM) chemistry from variably inundated riverbed sediments to uncover principles governing DOM composition at a reach-scale. This data package documents the workflow used to process and generate the main findings in the manuscript. The R scripts reference the raw, unprocessed Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) data from another data package, available on ESS-DIVE at https://data.ess-dive.lbl.gov/view/doi:10.15485/1834208. The scripts then process the raw FTICR-MS data and generate the findings and figures presented in the associated manuscript. In brief, this study demonstrates that DOM assemblages in variably inundated sediments are primarily governed by deterministic variable selection, including sediment moisture effecting the degree of deterministic assembly. See the manuscript for more details pertaining to interpretation and implications of the findings. This data package is associated with the GitHub repository found at https://github.com/WHONDRS-Hub/ECA_2020_Sed.This data package is comprised of 6 scripts and 7 folders. The file-level metadata file (file ending in "flmd.csv") lists all files contained in this data package and descriptions for each. The data dictionary (file ending in "dd.csv) describes all tabular data columns and their respective definitions and units. The FTICR_Processing_Scripts produce the outputs found in the "Processed_Data" folder. The remaining scripts (located in the parent directory) produce the outputs found in the following four folders: (1) "MCD_Dendrograms", "MCD_Randomizations", "MCD_bNTI_Outcomes", and "OM_Null_Modeling". The fifth script additionally takes the three comma-separated values (CSV) files found in the parent directory as input ("VGC_texture.csv", "merged_weights.csv", and "ECA2_FTICR_BetaDisp.csv"). The outputs of each of the five scripts serve as the input to the following script, with the final outputs stored in the folder "OM_Null_Modeling".

54 ENVIRONMENTAL SCIENCES↗

Beta-Delayed Neutron Emission of 𝑁=84 132Cd

Using the time-of-flight technique, we measured the beta-delayed neutron emission of 132 Cd . From our large-scale shell model (LSSM) calculation using the N3⁢LO interaction [, Phys. Rev. Lett. 131, 022501 (2023)], we suggest the decay is dominated by the transformation of a neutron in the 𝑔7/2 orbital, deep below the Fermi surface, into a proton in the 𝑔9/2 orbital. We compare the beta-decay half-lives and neutron branching ratios of nuclei with 𝑍<50 and 𝑁 ≥82 obtained with our LSSM with those of leading “global” models such as finite-range droplet model (FRDM). Our calculations match known half-lives and neutron branching ratios well and suggest that current leading models overestimate the yet-to-be-measured half-lives. Our model, backed by the 132 Cd decay data presented here, offers robust predictive power for nuclei of astrophysical interest such as 𝑟-process waiting points.

Madurga, M [Department of Physics and Astronomy, U↗

Thermocouple and RTD Drift Due to Neutron Irradiation and Temperature for Space Nuclear Applications: A Review

Temperature measurement is a key factor in the safe and reliable operation of nuclear reactors. Thermocouples and resistance temperature detectors (RTDs) are among the most common and reliable tools deployed for temperature measurement, and some are capable of operating in extreme environments such as very high temperature and neutron radiation fields anticipated in nuclear thermal propulsion (NTP) or fission surface power. These devices are known to exhibit drifting behavior in their temperature readings throughout their operational lifetimes. Here, to help select appropriate instrumentation, it is important to identify the factors that influence drift as well as typical behavior in these environments. This work is focused on identifying contributing factors in the performance of thermocouples and RTDs. An extensive literature review is included that discusses several experimental results in different environments. Although individual instrument performance may vary with construction methods, materials selection, and vendors, this review aims to assist in the selection process and identify typical expected behaviors of several devices.

Chesser, Ryan J. [Oak Ridge National Laboratory (O↗