Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “point processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

A unified treatment of the filament and flare instabilities

An integrated theory of cooling and resistive reconnection processes in flares and filaments of a sheared magnetic structure is proposed. Thermal and tearing phenomena in the structure were coupled by means of a temperature-dependent Coulomb instability, and the relevant linearized equations were solved numerically over a range of parameters. It is shown that an increase in the growth rate of instabilities in the structure was associated with a significant amount of magnetic reconnection, particularly at shorter wavelengths. Long wavelength reconnection was abetted by an increase in Coulomb resistivity due to the dominance of cooling at the X-point. Some implications of the above results for current models of solar coronal reconnection processes are discussed.

Van Hoven, G.↗
NASA NTRS1999

Microwave Induced Direct Bonding of Single Crystal Silicon Wafers

We have heated polished doped single-crystal silicon wafers in a single mode microwave cavity to temperatures where surface to surface bonding occurred. The absorption of microwaves and heating of the wafers is attributed to the inclusion of n-type or p-type impurities into these substrates. A cylindrical cavity TM (sub 010) standing wave mode was used to irradiate samples of various geometry's at positions of high magnetic field. This process was conducted in vacuum to exclude plasma effects. This initial study suggests that the inclusion of impurities in single crystal silicon significantly improved its microwave absorption (loss factor) to a point where heating silicon wafers directly can be accomplished in minimal time. Bonding of these substrates, however, occurs only at points of intimate surface to surface contact. The inclusion of a thin metallic layer on the surfaces enhances the bonding process.

Budraa, N. K.↗
NASA NTRS1999

Reconnection in Three Dimensions

Analyzing the qualitative three-dimensional magnetic structure of a plasmoid, we were led to reconsider the concept of magnetic reconnection from a general point of view. The properties of relatively simple magnetic field models provide a strong preference for one of two definitions of magnetic reconnection that exist in the literature. Any concept of magnetic reconnection defined in terms of magnetic topology seems naturally restricted to cases where the magnetic field vanishes somewhere in the nonideal (diffusion) region. The main part of this paper is concerned with magnetic reconnection in nonvanishing magnetic fields (finite-B reconnection), which has attracted less attention in the past. We show that the electric field component parallel to the magnetic field plays a crucial physical role in finite-B reconnection, and we present two theorems involving the former. The first states a necessary and sufficient condition on the parallel electric field for global reconnection to occur. Here the term "global" means the generic case where the breakdown of magnetic connection occurs for plasma elements that stay outside the nonideal region. The second theorem relates the change of magnetic helicity to the parallel electric field for cases where the electric field vanishes at large distances. That these results provide new insight into three-dimensional reconnection processes is illustrated in terms of the plasmoid configuration, which was our starting point.

Hesse, Michael↗
NASA NTRS1992

System diagnostic builder

The System Diagnostic Builder (SDB) is an automated software verification and validation tool using state-of-the-art Artificial Intelligence (AI) technologies. The SDB is used extensively by project BURKE at NASA-JSC as one component of a software re-engineering toolkit. The SDB is applicable to any government or commercial organization which performs verification and validation tasks. The SDB has an X-window interface, which allows the user to 'train' a set of rules for use in a rule-based evaluator. The interface has a window that allows the user to plot up to five data parameters (attributes) at a time. Using these plots and a mouse, the user can identify and classify a particular behavior of the subject software. Once the user has identified the general behavior patterns of the software, he can train a set of rules to represent his knowledge of that behavior. The training process builds rules and fuzzy sets to use in the evaluator. The fuzzy sets classify those data points not clearly identified as a particular classification. Once an initial set of rules is trained, each additional data set given to the SDB will be used by a machine learning mechanism to refine the rules and fuzzy sets. This is a passive process and, therefore, it does not require any additional operator time. The evaluation component of the SDB can be used to validate a single software system using some number of different data sets, such as a simulator. Moreover, it can be used to validate software systems which have been re-engineered from one language and design methodology to a totally new implementation.

Nieten, Joseph L.↗
NASA NTRS1985

Automated Extraction of Absorption Bands from Reflectance Special

A multiple high order derivative spectroscopy technique has been developed for deriving wavelength positions, half widths, and heights of absorption bands in reflectance spectra. The technique is applicable to laboratory spectra as well as medium resolution (100-200/cm) telescope or spacecraft spectra with moderate (few percent) noise. The technique permits absorption band positions to be detected with an accuracy of better than 3%, and often better than 1%. The high complexity of radiative transfer processes in diffusely reflected spectra can complicate the determination of absorption band positions. Continuum reflections, random illumination geometries within the material, phase angle effects, composite overlapping bands, and calibration uncertainties can shift apparent band positions by 20% from their actual positions or mask them beyond detection. Using multiple high order derivative analysis, effects of scattering continua, phase angle, and calibration (smooth features) are suppressed. Inflection points that characterize the positions and half widths of constituent bands are enhanced by the process and directly detected with relatively high sensitivity.

Huguenin, R. L.↗
DOE OSTI2021

Landscape-scale Characterization of Arctic Tundra Vegetation Composition, Structure, and Function with a Multi-sensor Unoccupied Aerial System: Supporting Data.

Airborne remote sensing data collected using the Brookhaven National Laboratory's (BNL) heavy-lift unoccupied aerial system (UAS) octocopter platform, the Osprey, operated by the Terrestrial Ecosystem Science and Technology (TEST) group (https://www.bnl.gov/testgroup). This package includes data from three flights flown over the NGEE-Arctic Council, Kougarok and Teller sites in July, 2018. The Osprey is a multi-sensor UAS platform that simultaneously measures very high spatial resolution optical red/green/blue (RGB) and thermal infrared (TIR) surface 'skin' temperature imagery, as well as surface reflectance at 1 nm intervals in the visible to near-infrared spectral range 350 - 1000 nm measured at regular intervals along each flight path. Derived image products include ortho-mosaiced RGB and TIR images, an RGB-based digital surface model (DSM) using the structure from motion (SfM) technique, digital terrain model (DTM), and a canopy height model (CHM). In addition, a VNIR surface reflectance file is provided for the trigger locations collected during each flight campaign. Ancillary aircraft data, flight mission parameters, and general flight conditions provided by the onboard flight and data collection computers are also included. Unprocessed and processed data products are included in this package (processing levels 0-3). Data and metadata are provided as text (*.txt, *.json, *.kml, *hdr, *.enp), tabular (*.dat, *.csv, *.waypoint, ENVI format (no extension)), point cloud (*.laz) and image (*.jpg, *.tif, *png) formats. This metadata document contains flight campaign, instrument and file metadata, along with a description of data processing levels, data products and file naming scheme.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy?s Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Signal processing in a randomly time varying system.

Stochastic operators are applied to an analysis of some deterministic systems of signal transformation. The distribution of a random process at the output of a system is given through its distribution at the input and through a stochastic Green's function. A two-point correlation function is derived to obtain a solution to differential equations which contain coefficients, boundary conditions, or right-hand terms representing random processes.

Adomian, G.↗
NASA NTRS1984

A fast Fermi process - Energetic electrons accelerated by a nearly perpendicular bow shock

A fast Fermi process which may explain how solar wind electrons are energized in the vicinity of the point of tangency of the IMF to the earth's bow shock is discussed. In the solar wind frame, the nearly perpendicular bow shock behaves as a rapidly moving magnetic mirror in such a manner that electrons with sufficiently large pitch angles can be reflected and accelerated. If the seed electrons have energies of several hundred electron volts, they can attain energies of several keV through the acceleration process.

Wu, C. S.↗
DOE OSTI2023

Thermodynamic description of molten salt systems: KCl-LiCl-NaCl and KCl-LiCl-NdCl 3

The mixture of KCl and LiCl has been used as electrolyte in the electrorefining process to recover uranium from used nuclear fuels due to the low melting point. However, lanthanides and sodium in the reactor waste continuously dissolve into it and thus alter its thermodynamic properties. To understand the thermodynamic behavior evolution of the electrolyte with the accumulation of impurities, thermodynamic modeling for KCl-LiCl-NaCl and KCl-LiCl-NdCl 3 and four constituent binary systems in the entire composition space was performed using the CALPHAD (CALculation of PHAse Diagrams) approach. The ionic liquid was described by the two-sublattice model, where neutral species were introduced to consider short-range ordering (SRO) within the melt, whereas the solid solution was modeled based on the Compound Energy Formalism. Literature data on phase equilibria and thermochemical properties were critically evaluated and used during the optimization of thermodynamic parameters for KCl-LiCl-NaCl and KCl-LiCl-NdCl 3 and their subsystems. The calculated phase diagrams and mixing enthalpies are in good agreement with the experimental data. The thermodynamic modeling for the KCl-LiCl-NdCl 3 system was carried out for the first time. To fill the gap in experimental measurement, enthalpy of mixing for the KCl-LiCl-NdCl 3 melt was estimated using the surrounded-ion model. These data then served as critical inputs for thermodynamic optimization. Furthermore, the present study can provide insights into thermodynamic property evolution of the electrolyte and solubility limit of various impurities during the electrorefining process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1989

Space-stabilized beam pointing for a bifocal satellite experiment

The pointing and tracking control concept for an experimental ground-based laser beam relay satellite is described. The satellite receives a low-power laser beam from a ground-based laser, processes it, and reflects it to an instrumented target. The primary control objective is to achieve extremely accurate and stable pointing at the target, including moving targets. This is achieved using an optical/inertial stabilization technique. The paper describes the satellite optical layout and pointing control mechanization.

Redding, David C.↗
DOE OSTI2025

Effect of sintering temperature on adhesion of spray-on piezoelectric transducers

Conventionally sol-gel spray-on transducers require a high-temperature (> 700 ◦C) sintering process; however, this process can affect the microstructure of the substrate material. For mechanical elbows and valves utilized for fluid transport in the energy sector, the components are designed to have a specific microstructure, and deviations from these specifications can create weak points in the system. For this reason it is important to investigate how the temperature of the deposition process affects the substrate. This paper investigates the effect of high-temperature and low-temperature (< 150 ◦C) processing conditions on the surface composition of the substrate. Furthermore, the resultant transducers from high- and low-temperature fabrication processes are compared to determine if a low-temperature processing method is feasible. For these studies a sol-gel spray-on process is employed to deposit piezoelectric ceramics onto a stainless-steel 316L substrate. Energy-dispersive X-ray spectroscopy is utilized to determine the composition of the substrate surface before and after transducer deposition. Results indicate that the high-temperature processing conditions may alter the surface composition of the metal due to a diffusion of the metal into the ceramic, which results in a metal surface that is bonded to the ceramic. Furthermore, it is shown that low-temperature processing of spray-on transducers is a viable method for transducer fabrication where the resultant transducers meet the industry minimum requirement of 30 dB signalto-noise ratio. In parallel simulation calculations, finite-element method (FEM) studies were performed to model the adhesive strength of the low-temperature processed transducer to the substrate surface. Comparisons between the simulations and experiments suggest that the bond strength is much greater than the commercial gel bonds and closer to hardened epoxy glue bonds. These results indicate that spray-on transducers fabricated under lowtemperature processing conditions are a viable solution for leave-in-place monitoring of structures.

M. Sinding, Kyle↗
NASA NTRS1972

The resolution of point sources of light as analyzed by quantum detection theory

The resolvability of point sources of incoherent light is analyzed by quantum detection theory in terms of two hypothesis-testing problems. In the first, the observer must decide whether there are two sources of equal radiant power at given locations, or whether there is only one source of twice the power located midway between them. In the second problem, either one, but not both, of two point sources is radiating, and the observer must decide which it is. The decisions are based on optimum processing of the electromagnetic field at the aperture of an optical instrument. In both problems the density operators of the field under the two hypotheses do not commute. The error probabilities, determined as functions of the separation of the points and the mean number of received photons, characterize the ultimate resolvability of the sources.

Helstrom, C. W.↗
NASA NTRS1973

Resolution of point sources of light as analyzed by quantum detection theory.

The resolvability of point sources of incoherent thermal light is analyzed by quantum detection theory in terms of two hypothesis-testing problems. In the first, the observer must decide whether there are two sources of equal radiant power at given locations, or whether there is only one source of twice the power located midway between them. In the second problem, either one, but not both, of two point sources is radiating, and the observer must decide which it is. The decisions are based on optimum processing of the electromagnetic field at the aperture of an optical instrument. In both problems the density operators of the field under the two hypotheses do not commute. The error probabilities, determined as functions of the separation of the points and the mean number of received photons, characterize the ultimate resolvability of the sources.

Helstrom, C. W.↗
DOE OSTI2022

Discovering hydrothermalism from Afar: In Situ methane instrumentation and change-point detection for decision-making

Seafloor hydrothermalism plays a critical role in fundamental interactions between geochemical and biological processes in the deep ocean. A significant number of hydrothermal vents are hypothesized to exist, but many of these remain undiscovered due in part to the difficulty of detecting hydrothermalism using standard sensors on rosettes towed in the water column or robotic platforms performing surveys. Here, we use in situ methane sensors to complement standard sensing technology for hydrothermalism discovery and compare sensors on a towed rosette and an autonomous underwater vehicle (AUV) during a 17 km long transect in the Northern Guaymas Basin in the Gulf of California. This transect spatially intersected with a known hydrothermally active venting site. These data show that methane signalled possible hydrothermal-activity 1.5–3 km laterally (100–150 m vertically) from a known vent. Methane as a signal for hydrothermalism performed similarly to standard turbidity sensors (plume detection 2.2–3.3 km from reference source), and more sensitively and clearly than temperature, salinity, and oxygen instruments which readily respond to physical mixing in background seawater. We additionally introduce change-point detection algorithms—streaming cross-correlation and regime identification—as a means of real-time hydrothermalism discovery and discuss related data supervision technologies that could be used in planning, executing, and monitoring explorative surveys for hydrothermalism.

58 GEOSCIENCES↗
DOE OSTI2023

Rational synthesis of high-performance Ni-rich layered oxide cathode enabled via probing solid-state lithiation evolution

Lithium (Li)-ion batteries using nickel (Ni)-rich layered oxide cathode have been pursued with interest due to high practical energy density. A fundamental understanding of the reaction pathways and structural evolution of the solid-phase synthesis of these materials is crucial for their rational design and process development for mass production. In this work, structural evolution during solid-state synthesis was traced via in situ technique, with a particular emphasis on the lithiation reaction and migration of transition metal (TM) ions. The sintering process is governed by the competitive relationship of decomposition and lithiation reactions, which can be regulated through temperature windows. Controlling the melting point of the Li sources, as well as their affinity to cathode precursors, is highly desired to maintain the layered ordering of TM ions throughout the whole synthesis process, which simplifies the manufacturing process and improves the quality of the manufactured cathode material.

25 ENERGY STORAGE↗
NASA NTRS1979

The Massively Parallel Processor and its applications

A long-term experimental development program conducted at Goddard Space Flight Center to implement an ultrahigh-speed data processing system known as the Massively Parallel Processor (MPP) is described. The MPP is a single instruction multiple data stream computer designed to perform logical, integer, and floating point arithmetic operations on variable word length data. Information is presented on system architecture, the system configuration, the array unit architecture, individual processing units, and expected operating rates for several image processing applications (including the processing of Landsat data).

Strong, J. P.↗
DOE OSTI2020

Variable-Speed Pump Efficiency Calculation For Fluid Flow Systems with and without Static Head

To accurately calculate pump energy savings gained from implementing variable frequency drive (VFD) controls, the variation of pump efficiency must be considered when operating conditions transition from the design operating point to new operating points. Many software tools require users to specify the new pump efficiency, or it is assumed to be unchanged. Unfortunately, many users have challenges of estimating the pump efficiency at new operating points. This paper presents a simplified method of estimating centrifugal pump efficiency at new operating speeds when the pump is controlled by a VFD. This methodology applies to systems with and without static head when the system curve is not affected by the change, and also systems where the change in operation changes the system curve.A hypothetical fluid flow system and centrifugal pump were used to demonstrate the calculation process for these scenarios. For this hypothetical system, the pump’s efficiency at new operating points was up to 5.4% lower than the design operating point.

42 ENGINEERING↗
NASA NTRS1992

A new programming metaphor for image processing procedures

Most image processing systems, besides an Application Program Interface (API) which lets users write their own image processing programs, also feature a higher level of programmability. Traditionally, this is a command or macro language, which can be used to build large procedures (scripts) out of simple programs or commands. This approach, a legacy of the teletypewriter has serious drawbacks. A command language is clumsy when (and if! it attempts to utilize the capabilities of a multitasking or multiprocessor environment, it is but adequate for real-time data acquisition and processing, it has a fairly steep learning curve, and the user interface is very inefficient,. especially when compared to a graphical user interface (GUI) that systems running under Xll or Windows should otherwise be able to provide. ll these difficulties stem from one basic problem: a command language is not a natural metaphor for an image processing procedure. A more natural metaphor - an image processing factory is described in detail. A factory is a set of programs (applications) that execute separate operations on images, connected by pipes that carry data (images and parameters) between them. The programs function concurrently, processing images as they arrive along pipes, and querying the user for whatever other input they need. From the user's point of view, programming (constructing) factories is a lot like playing with LEGO blocks - much more intuitive than writing scripts. Focus is on some of the difficulties of implementing factory support, most notably the design of an appropriate API. It also shows that factories retain all the functionality of a command language (including loops and conditional branches), while suffering from none of the drawbacks outlined above. Other benefits of factory programming include self-tuning factories and the process of encapsulation, which lets a factory take the shape of a standard application both from the system and the user's point of view, and thus be used as a component of other factories. A bare-bones prototype of factory programming was implemented under the PcIPS image processing system, and a complete version (on a multitasking platform) is under development.

Smirnov, O. M.↗