Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Understanding Plant Nitrogen Form Preference Responses to Elevated CO2 Earth and Spaceflight Cabin Environments.

Future long-duration missions to the International Space Station (ISS) and beyond will require a sustainable supply of food to support human crews. The spaceflight cabin environment often contains very high concentrations of CO2, and it is therefore crucial to understand plant responses to elevated CO2 (eCO2) environments. Much focus has been given to plant photosynthetic and performance parameters in response to eCO2, but studies on the effects of eCO2 on nitrogen uptake are poorly understood. Our previous work at The University of Sheffield, UK using novel stable isotope approaches has shown enhanced ammonium uptake and preference compared to nitrate at eCO2 in varieties of spring barley, hypothesised to be an indirect consequence of changes in photosynthesis and photorespiration. However, several varieties did not display altered preference under eCO2 and the universality of this response remains to be understood. In this NASA NPP project, several candidate crop species such as lettuce, radish and tomato will be screened using stable isotopes to assess whether N preference changes in favor of ammonium in response to eCO2 and whether this remains true at super-elevated CO2 (seCO2), which is often experienced on the ISS. Photosynthetic and related measurements will help to disentangle the relationship between these responses and photosynthesis. This work will enable the development of optimized nutrient regimes for candidate crops in space and in future Lunar and Martian habitats and will pave the way for selection of crop varieties adapted to an eCO2 and/or seCO2 environment. Moreover, this research will further our understanding of plant responses to the eCO2 environment brought about by climate change, allowing the development of future-proof crops that will help to maintain food security. This NPP Fellowship is funded by NASA Space Biology.

space plant biology↗
NASA NTRSDate not supplied

Satellite-assisted Evaluation of Irrigation Application Efficiency for Lettuce in the Salinas Valley

The Salinas Valley region of California’s Central Coast is a majorU.S. vegetable producer. Lettuce is a leading commodity, grown on about 100,000 acres with annual value near $1.4B (2022 Monterey County Ag Report). Vegetables crops in the area aretypically well watered and fertilized in pursuit of commercial yield and quality standards. Information on irrigation application efficiency, meanwhile, can enhance waterresource sustainability and mitigate impacts of nitrate infiltrationon groundwater quality. The Crop Consumptive Use Fraction (CCUF), previously recommended by the California Department of Water Resources, is a metric that expresses evapotranspiration (ET) of applied water relative to total applied water. More recently under Assembly Bill 1668 addressing water conservation and drought planning, the metric can be used to help quantify application efficiency to support preparation of agricultural water management plans in the state. This study will report CCUF evaluations from several commercial lettuce plantings in the Salinas Valley during the 2022 dry season (late spring-early fall). The evaluations were derived from satellite-based observations of cropET from the OpenETcloud application, and applied water monitored by in-line flowmetersand supplemented by grower reports of irrigation system runtime. The study will also compare observed (satellite-based) ET with modeled ET from the CropManage irrigationand nutrient management decision-support system operated by Cooperative Extension. Additional study in cool-season vegetables is ongoing in 2023.

Satellite-assisted↗
NASA NTRSDate not supplied

Tropospheric Ozone in the NASA GEOS Model: Effects of Satellite Data Assimilation and Improvements in Background NO x Chemistry

Tropospheric ozone is a major atmospheric oxidant, the primary source of the hydroxyl radical, and a greenhouse gas. In the troposphere, it is produced from the oxidation of carbon monoxide and volatile organic compounds in the presence of nitrogen oxides (NO x =NO+NO 2 ) or has its origins in the stratosphere. The tropospheric ozone burdens in global atmospheric chemistry models disagree by a factor of 1.5, indicating an incomplete understanding of ozone sources and sinks. Here we examine the tropospheric ozone simulation in NASA Global Modeling and Assimilation Office’s (GMAO’s) GEOS model with the GEOS-Chem chemistry mechanism (version 14.2), using observations from satellites, aircraft, ozonesondes, and surface sites. This modeling framework is used to produce GMAO’s GEOS Composition Forecasts (GEOS-CF), and it has been updated extensively with new emission inventories, improved model physics, satellite data assimilation capability, and an up-to-date chemical mechanism that includes tropospheric halogen chemistry and NOx recycling from particulate nitrate. Earlier versions of the model using GEOS-Chem version 12.0 showed an underestimate in tropospheric ozone in the northern hemisphere. We evaluate the ozone simulation in the updated model, focusing on the effects of assimilating satellite NO 2 data from the Ozone Monitoring Instrument (OMI), constraining stratospheric ozone to satellite data, and updates to the NOx chemistry. We will examine changes in the vertical profiles of tropospheric ozone over the US in support of the Tropospheric Emissions: Monitoring of Pollution (TEMPO), and discuss implications for the tropospheric ozone budget.

Viral Shah↗
NASA NTRS2024

Leveraging Scientific Community Knowledge for Air Quality Model Chemistry Parameterizations

Air pollution contributes to adverse health outcomes. Approximately 121 million people in the United States—one third of the population—live where National Ambient Air Quality Standards (NAAQS) are violated. In most cases, the criteria pollutants exceeding standards are ozone (O 3 ) and fine particles (PM 2.5 ). In addition, 188 substances known or suspected to cause cancer or other serious health effects are designated as hazardous air pollutants (HAPs). Essentially, all O 3 and significant portions of PM 2.5 and HAPs are produced in the atmosphere through chemical and physical processes. In the case of PM 2.5 , subcomponents formed primarily from precursor gases—sulfate, nitrate, ammonium, and secondary organic aerosol (SOA)—account for 60% of the U.S. county-level annual mean concentration. In addition, 47% of the cancer risk and 25% of the noncancer risk from HAPs have been attributed to atmospheric chemistry rather than direct emissions. In this article, we introduce the role of chemical mechanisms in air quality models, a new atmospheric science community effort, and needs for further mechanism development.

Havala O.T. Pye↗
NASA NTRSDate not supplied

Plasma Processing of Water and Inedible Biomass Ash Leaching

Researchers at Kennedy Space Center have developed a technology that generates plasma activated water in pH ranges that allow for the addition of nitrates and other nutrients to the water while maintaining a healthy pH for plants. A plasma torch is used to treat inedible biomass, generating ash containing nutrients useful for plant growth. The same plasma torch is also used to treat water, which results in the formation of nitric acid that lowers the pH of the water. Adding the plasma generated ash to the plasma treated water can balance the pH of the water to make it suitable for plant growth while simultaneously adding nutrients recycled from the inedible biomass to further enhance plant development. Plasma treatment of water to high and low pH extremes can also be used for sanitation purposes, causing pH shock to undesired organisms. The uniqueness of this process is the adjustability of the pH with one system. The same plasma system can be used to treat both the water and the biomass. Additionally, the technology can be used as an on-demand, point-of-use method for producing nitric acid.

Space Crop Production↗
NASA NTRSDate not supplied

Evaluation of GEOS Aerosols Using CAMP2Ex Observations

Biomass burning aerosol impacts aspects of the atmosphere and Earth system through direct and semi-direct effects, as well as influencing air quality. Despite its importance, the representation of biomass burning aerosol is not always accurate in numerical weather prediction and climate models or reanalysis products. Using observations collected as part of the Cloud, Aerosol and Monsoon Processes Philippines Experiment (CAMP2Ex) in August through October of 2019, aerosol concentration and optical properties are evaluated within the Goddard Earth Observing System (GEOS) and its underlying aerosol module, GOCART. In the operational configuration, GEOS assimilates aerosol optical depth observations at 550 nm from AERONET and MODIS to constrain aerosol fields. Particularly for biomass burning aerosol, without the assimilation of aerosol optical depth, aerosol extinction is underestimated compared to observations collected in the Philippines region during the CAMP2Ex campaign. The assimilation process adds excessive amounts of carbon to account for the underestimated extinction, resulting in positive biases in the mass of black and organic carbon, especially within the boundary layer, relative to in situ observations from the Langley Aerosol Research Group Experiment. Counteracting this, GEOS is deficient in sulfate and nitrate aerosol just above the boundary layer. Aerosol extinction within GEOS is a function of the mass of different aerosol species, the ambient relative humidity, the assumed spectral optical properties, and particle size distribution per species. The relationship between dry and ambient extinction in GEOS reveals that hygroscopic growth is too high within the model for biomass burning aerosol. An additional concern lies in the assumed particle size distribution for GEOS, which has a single mode radius that is too small for organic carbon. Variability in the observed particle size distribution for biomass burning aerosol within a single flight also illuminates the fact that a single assumed particle size distribution is not sufficient and that for a proper representation, a more advanced aerosol module within GEOS may be necessary.

Allison Collow↗
NASA NTRSDate not supplied

A Simulated High CO 2 Spaceflight Environment Increases Plant Preference for Ammonium as a Nitrogen Source.

The growth of crops to sustain astronauts will be critical to long-duration spaceflight missions. Carbon dioxide (CO 2 ) concentrations are very high in spaceflight cabin environments, often 5-10X the CO 2 concentration on Earth 1 . It is therefore crucial to understand how plants respond to elevated CO 2 (eCO 2 ). Nitrogen (N) is important for plant survival, though the effects of eCO 2 on plant uptake of different N forms remain poorly understood. Shoot nitrate assimilation may be reduced at eCO 2 due to a decrease in available reducing power through increased carbon fixation and inhibition of photorespiration 2 , suggesting that eCO 2 may increase plant ammonium preference (Figure 1). A deeper understanding of changes in plant nitrogen form preference in response to eCO 2 will inform nutrient optimization for future space crop production and wastewater processing system design requirements 3 in addition to developing future eCO 2 climate-ready crops.

nitrogen↗
NASA NTRSDate not supplied

Performance of Heterogeneous Sulfate Aerosol Formation Mechanisms Against Aircraft and Ground-Based Observations in Seoul, South Korea

Haze events are a common occurrence in East Asia, where local meteorology combines with anthropogenic emissions under certain conditions to create rapid increases in secondary aerosol. Often these events are driven by rapid production of secondary sulfate-nitrate-ammonium (SIA) aerosol. Models have typically included simple parameterizations of the production of sulfate during these events which vary widely in their magnitude. There are a range of different mechanistic descriptions of the chemical processes occurring during these events in large part due to poor constraints on aerosol pH and transition metal content, both of which are important to determining the key pathway(s) driving aerosol production. Here, we use the GEOS-Chem chemical transport model to interpret detailed ground and aircraft observations from May and June 2016 during the Korea-United States Air Quality (KORUS-AQ) field study to evaluate the mechanistic pathways governing sulfate production during a haze event. We apply our model of sulfate production mechanisms to ground-based speciated aerosol measurements in winter, summer, and fall in Seoul.

Katherine R Travis↗
DOE OSTI2020

Front End Engineering Design Report

Energy storage is becoming an increasingly important component on modern power grids to ensure sufficient balancing capability for intermittent renewable power generations is available to maintain system reliability. Although energy storage has traditionally been provided by pumped storage hydroelectric systems, it is not possible to install these at every location and they can be expensive to construct. Lithium Ion batteries are increasingly being used to carry out energy storage grid services, however these can be expensive when specified over a few hours of capacity. An alternative way to store substantial energy is to use thermal energy storage (TES). This has been deployed on concentrated solar units using molten nitrate salts as a storage media. Again, the cost of the material can be prohibitive, thus lower cost alternative materials are being actively sought, such as sand, rocks and concrete. This project investigates the potential for Concrete Thermal Energy Storage (CTES) when used to directly store thermal energy from a thermal plant source. This report represents the initial Front-End Engineering Design (FEED) deliverables that are submitted for the Hazard and Operability (HAZOP) safety review for process validation.

25 ENERGY STORAGE↗
DOE OSTI2020

CTES Pilot Plant Detailed Design Report

Energy storage is becoming an increasingly important component on modern power grids to ensure sufficient balancing capability for intermittent renewable power generations is available to maintain system reliability. Although energy storage has traditionally been provided by pumped storage hydroelectric systems, it is not possible to install these at every location and they can be expensive to construct. Lithium Ion batteries are increasingly being used to carry out energy storage grid services, however these can be expensive when specified over a few hours of capacity. An alternative way to store substantial energy is to use thermal energy storage (TES). This has been deployed on concentrated solar units using molten nitrate salts as a storage media. Again, the cost of the material can be prohibitive, thus lower cost alternative materials are being actively sought, such as sand, rocks and concrete. This project investigates the potential for Concrete Thermal Energy Storage (CTES) when used to directly store thermal energy from a thermal plant source. This report represents the Detailed Design phase deliverables comprising of the process, mechanical, electrical, piping along with control and instrumentation documents. Civil and structural deliverables are included on a preliminary basis due to outstanding site investigation activities. CTES block transportation testing results and the pilot plant testing plan is also included in this report.

25 ENERGY STORAGE↗
DOE OSTI2020

Technical Performance of Refractory Liners for Molten Chloride Salt Thermal Energy Storage Systems

A chloride-based molten-salt system that uses a ternary blend of MgCl2/KCl/NaCl is investigated to provide higher temperature thermal energy storage capability. Despite higher thermal stability, molten chlorides present several unique challenges, including the design of internal refractory-ceramic liners to prevent the corrosion and thermal stress of alloy tank shells. This work discusses issues and potential solutions related to containment of molten chloride salt, specifically the optimization of the refractory material at the molten salt interface (hot face). The down-selected hot face candidate limits permeation of salt through the material and forms a highly stable secondary surface phase in equilibrium with the molten salt. A mortar is created using the corrosion resistant hot face brick. Brick and mortar composite are subjected to mechanical stress/strain analysis, in order to calculate composite material properties and better inform thermomechanical models. The U.S. Department of Energy Generation 3 (DOE Gen3) program seeks to develop higher efficiency CSP plants that can provide cost-competitive, flexible power in the U.S. electric grid. The proposed Gen3 Liquid Pathway CSP plant closely resembles the configuration of current nitrate salt power towers with two-tank storage (Gen2). The differences between Gen2 and Gen3 include the types of compatible materials used in salt storage tank construction. Stainless steel loses strength at Gen3 temperatures, and although nickel superalloys would be capable of withstanding sustained high temperatures, these materials are prohibitively expensive at scale. Uninsulated tank shells also pose a significant risk as common steels are highly susceptible to chemical attack from molten chloride salt. To address these concerns, refractory-ceramic based containment materials are proposed to line the inside of the hot and cold storage tanks. In doing so, stainless or carbon steel shells may be used in construction depending on the level of insulation provided. The composition of the internal liner requires careful consideration to maximize the efficacy of multiple parameters including corrosion resistance, strength at operating temperature, durability, and cost. This is particularly true for the material at the interface with the salt, known as the "hot face", which is responsible for protecting the insulating layers between the tank shell and the hot face brick layer. The molten salt in this system is superheated over 300 °C above its freeze temperature. Therefore, unlike other industrial processes which use refractory-lined vessels, it is not expected that a freeze plane will develop in the hot face. Therefore, the hot face must be designed to withstand chemical corrosion and inhibit permeation of molten salt into the insulating layers. A down selection was performed to identify a hot face candidate best equipped to maintain thermal, mechanical, and chemical integrity when exposed to molten salt over extended periods of time. Long-duration chemical capability experiments were conducted with the down selected hot face refractory fully immersed in molten chloride salt for up to 3000 hours. The average salt penetration does not exceed 100 microns. When extrapolated to 20 and 30 years of continuous exposure, the expected salt penetration depth is approximately 2.0 mm and 2.9 mm, respectively. A magnesium-rich secondary phases develops at the salt/refractory interface. X-ray diffraction identifies the material as forsterite (Mg2SiO4), which is reported to form synthetically in molten chloride salt solutions. These results suggest the selected hot face will adequately inhibit salt permeation. While there is optimism that the hot face brick will inhibit salt permeation, mortar joints are typically the weakest point of a refractory brick liner. From a thermochemical perspective, differing thermal expansion coefficients may result in the mortar and brick to grow independent of each other, creating gaps through which molten salt can penetrate. To address this issue, NREL has developed an in-house mortar composed of the down selected hot face brick that has been shown to be compatible with the salt. Compressive stress/strain analyses have been performed on the brick/ mortar composites to generate stress/strain curves. Modulus of elasticity and Poisson's ratio of the composite may be calculated from the stress/strain curves, in order to provide more representative data to finite element mechanical models for accurate approximation of stress on the tank shell and the amount of thermal expansion expected within the tank liner.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2020

Electrolyte formulations for electrochemical cells containing a silicon electrode

Additives to electrolytes that enable the formation of comparatively more robust SEI films on silicon anodes. The SEI films in these embodiments are seen to be more robust in part because the batteries containing these materials have higher coulombic efficiency and longer cycle life than comparable batteries without such additives. The additives preferably contain a nitrate group.

25 ENERGY STORAGE↗
DOE OSTI2021

Modified bacterium useful for producing an organic molecule

The present invention provides for a genetically modified host cell or bacterium capable of producing an organic molecule, wherein the bacterium is capable of using hydrogen sulfide as an electron donor, carbon dioxide (CO2) as a carbon source, and/or nitrate as an electron acceptor. The present invention is useful in the wastewater treatment industry, in particular in municipal wastewater treatment plants (WWTP).

Beller, Harry R.↗
DOE OSTI2021

Methods of making porous molecular structures

Disclosed herein is a method of making a porous molecular structure from a solution comprising an insoluble metal containing material and a ligand-providing material. In some embodiments, the porous molecular structure can be a Metal-Organic Framework (MOF). Ionic metal salts are the most common type of metal source for MOF production, but dissolution of metal salts complicates solvent recycling and creates corrosion and oxidation issues through evolved nitrate and chloride anions. Elucidating information that leads toward more efficient production of these versatile nanomaterials, while extending the knowledge base of how MOFs form during reaction, is critical to advancing MOF materials into large-scale use. Disclosed herein are improved methods for controlled synthesis of porous molecular structures such as MOFs comprising a solution-based synthesis with insoluble metallic precursor.

Joshi, Jayraj Nayan↗
DOE OSTI2022

Identification of Critical Material Attributes in Lignin Streams Based on Pseudomonas putida Performance

Variability in chemical composition of corn stover feedstocks has been suggested to play a role in biocatalyst performance during the conversion of lignocellulosic biomass to value-added compounds. In previous studies, we investigated the performance of Pseudomonas putida CJ781 - an engineered bacterium that converts aromatic compounds to muconate - on various lignin streams produced from the deacetylation of corn stover, and we found significant differences on muconate production. To better understand the origin of these differences, we down selected twenty-two compounds from literature - that had previously been detected as extractives in lignin streams - and we analyzed their concentrations in 12 lignin streams generated from different feedstocks. P. putida CJ781 was then cultivated in mock lignin streams supplemented with various concentrations of these compounds. Bacterial growth was tracked in microtiter plates and the performance was measured by comparing maximum growth rates among conditions. At maximum concentrations that may be found in lignin streams, sodium was the material attribute that limited growth rate in a greater extent, with a reduction in growth rate by 8 to 37%, depending on the counter ion, with sodium nitrate being the most inhibitory, followed by sodium acetate, sodium chloride, and sodium sulfate. Ammonium acetate was also found to be inhibitory at average concentrations of ammonium in lignin streams, reducing maximum growth rate by 18%. Overall, the data from this study has allowed to down select critical material attributes in lignin streams and process parameters that significantly affect the performance of P. putida and will be used as input to predictive models that aim to reduce risks attributed to feedstock variability in lignocellulosic biorefineries.

biocatalyst↗
DOE OSTI2022

Synthesis of metal metaphosphate for catalysts for oxygen evolution reactions

A method of manufacturing an electrode by disposing a three-dimensional substrate in a metal nitrate solution, drying, and thermally phosphatizing with a phosphorus source under inert gas to form a metal based phosphate catalyst on the substrate. An electrocatalyst and electrode produced via the method are also provided.

Ren, Zhifeng↗
DOE OSTI2021

Transamericium Radiation-Induced Redox Chemistry

The actinide series boasts many unique physical and chemical features worthy of study. However, the chemical influence of their inherent radiation field is often overlooked, especially as we begin to explore the late actinides (transamericium) in more detail than ever possible before. - Absorption of ionizing radiation induces the formation of a variety of transient and steady-state radicals, ions, and molecular degradation products. Many of these radiolysis products are strongly redox active and exhibit significant reactivity with a number of actinides, e.g., neptunium and americium. Here we present results from the first-ever time-resolved picosecond pulsed electron radiolysis measurements for the reaction of the late actinides (curium and californium) with reactive transients pertinent to actinide manipulations in aqueous solution, i.e., the hydrated electron (eaq–), the hydrogen atom (H•), and hydroxyl (•OH) and nitrate (•NO3) radicals.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Modeling of Stress Distribution in Molten Salt Thermal Energy Storage Tanks for In-Service Central Receiver Power Plants

Failures in molten nitrate salts thermal energy storage tanks (TES) have been occurring in several concentrating solar power (CSP) plants around the world after a few months or years of operation. These failures are mainly related to a combination of high stress, corrosion, large deformation, and thermal cycling. Most of these failures are a consequence of the infancy of this technology; technical standards for design, fabrication, implementation, and operation of molten salt tanks operating at temperatures up to 565 degrees Celsius do not exist and most of current in-service tanks have been designed using the recommendations from the American Petroleum Institute (API) 650 and the American Society of Mechanical Engineers ASME section II standards, which are applicable for TES tanks operating at lower temperatures. We have developed a 3-dimensional model of a representative molten salt hot tank design that uses typical CSP plant operation conditions and allows determining the temperature and stress distribution in the tank. The model also considers the initial floor residual stresses and distortion after its welding fabrication. We have identified critical thermal gradients in the tank floor and shell and locations in the tank where the stresses are high and could become susceptible points for failure.

concentrating solar power↗