Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mathematical model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Analyses of characteristics of ring-shaped electrostatic meter

This article describes the characteristics of ring-shaped electrostatic pulverized fuel meters and their applications. At the University of Teesside, UK, the electrostatic technique has been used to measure pulverized fuel flow concentration, velocity, and mass flow rate under lean-phase condition. The mathematic model has been developed to express the relationship between the root-mean-square (rms) value of the meter's output voltage and solids mass flow rate. The effects of solids velocity and particle size on measurements have also been reflected in the model. Furthermore, the model presents the sensitivity variations over the cross-sectional area of meter and along the pipe axis. The article also introduces the research carried out at Southeast University in China, where the technique has been extended to measure dense-phase flow of pulverized coal, which is common in gasification and blast furnaces.

01 COAL, LIGNITE, AND PEAT↗

Amplification of azimuthal modes with odd wave numbers during dynamical bar-mode growth in rotating stars

Nonlinear growth of the bar-mode deformation is studied for a differentially rotating star with supercritical rotational energy. In particular, the growth mechanism of some azimuthal modes with odd wave numbers is examined by comparing a simplified mathematical model with a realistic simulation. Mode coupling to even modes, i.e., the bar mode and higher harmonics, significantly enhances the amplitudes of odd modes, unless they are exactly zero initially. Therefore, other modes which are not axially symmetric cannot be neglected at late times in the growth of the unstable bar mode even when starting from an almost axially symmetric state.

79 ASTRONOMY AND ASTROPHYSICS↗

Flexible solar cells based on cadmium sulfide and telluride

Output parameters and diode characteristics under illumination of flexible thin-film solar cells ITO/CdS/CdTe/Cu/Au formed on polyimide films by vacuum methods are studied. Using mathematical modeling of the effect of diode characteristics under illumination on the efficiency, the physicothechnical parameters of such structures are optimized. This made it possible to obtain laboratory samples of flexible solar cells based on cadmium sulfide and telluride with an efficiency of 11.4%. Solar modules with an efficiency of 4.5% based on the developed flexible solar cells are formed for the first time.

36 MATERIALS SCIENCE↗

Superinfection and cure of infected cells as mechanisms for hepatitis C virus adaptation and persistence

Significance Viral populations exhibit an extraordinary ability to survive abrupt changes in host environment by rapidly generating adaptive mutations. However, our understanding of how viral populations respond to selection pressure and the underlying molecular mechanisms supporting viral adaptation in vivo is limited. Here, we report a set of clinical data sampled from subjects chronically infected by hepatitis C virus (HCV). The data show rapid expansion and turnover of drug-resistant viruses following treatment with an HCV protease inhibitor. By fitting mathematical models to the data, we propose that superinfection and cure of infected cells play critical roles in facilitating the rapid expansion and turnover of viral populations. Our results highlight the importance of considering intracellular viral competition in understanding rapid viral adaptation.

59 BASIC BIOLOGICAL SCIENCES↗

Time Utility Functions for Modeling and Evaluating Resource Allocations in a Heterogeneous Computing System

This study considers a heterogeneous computing system and corresponding workload being investigated by the Extreme Scale Systems Center (ESSC) at Oak Ridge National Laboratory (ORNL). The ESSC is part of a collaborative effort between the Department of Energy (DOE) and the Department of Defense (DoD) to deliver research, tools, software, and technologies that can be integrated, deployed, and used in both DOE and DoD environments. The heterogeneous system and workload described here are representative of a prototypical computing environment being studied as part of this collaboration. Each task can exhibit a time-varying importance or utility to the overall enterprise. In this system, an arriving task has an associated priority and precedence. The priority is used to describe the importance of a task, and precedence is used to describe how soon the task must be executed. These two metrics are combined to create a utility function curve that indicates how valuable it is for the system to complete a task at any given moment. This research focuses on using time-utility functions to generate a metric that can be used to compare the performance of different resource schedulers in a heterogeneous computing system. The contributions of this paper are: (a) a mathematical model of a heterogeneous computing system where tasks arrive dynamically and need to be assigned based on their priority, precedence, utility characteristic class, and task execution type, (b) the use of priority and precedence to generate time-utility functions that describe the value a task has at any given time, (c) the derivation of a metric based on the total utility gained from completing tasks to measure the performance of the computing environment, and (d) a comparison of the performance of resource allocation heuristics in this environment.

99 GENERAL AND MISCELLANEOUS↗

Denoising solar radiation data using coiflet wavelets

Signal denoising and smoothing plays an important role in processing the given signal either from experiment or data collection through observations. Data collection usually was mixed between true data and some error or noise. This noise might be coming from the apparatus to measure or collect the data or human error in handling the data. Normally before the data is use for further processing purposes, the unwanted noise need to be filtered out. One of the efficient methods that can be used to filter the data is wavelet transform. Due to the fact that the received solar radiation data fluctuates according to time, there exist few unwanted oscillation namely noise and it must be filtered out before the data is used for developing mathematical model. In order to apply denoising using wavelet transform (WT), the thresholding values need to be calculated. In this paper the new thresholding approach is proposed. The coiflet2 wavelet with variation diminishing 4 is utilized for our purpose. From numerical results it can be seen clearly that, the new thresholding approach give better results as compare with existing approach namely global thresholding value.

14 SOLAR ENERGY↗

High order ADER schemes for a unified first order hyperbolic formulation of continuum mechanics: Viscous heat-conducting fluids and elastic solids

Highlights: • High order schemes for a unified first order hyperbolic formulation of continuum mechanics. • The mathematical model applies simultaneously to fluid mechanics and solid mechanics. • Viscous fluids are treated in the frame of hyper-elasticity as generalized visco-plastic solids. • Formal asymptotic analysis reveals the connection with the Navier–Stokes equations. • The distortion tensor A in the model appears to be well-suited for flow visualization. - Abstract: This paper is concerned with the numerical solution of the unified first order hyperbolic formulation of continuum mechanics recently proposed by Peshkov and Romenski [110], further denoted as HPR model. In that framework, the viscous stresses are computed from the so-called distortion tensor A, which is one of the primary state variables in the proposed first order system. A very important key feature of the HPR model is its ability to describe at the same time the behavior of inviscid and viscous compressible Newtonian and non-Newtonian fluids with heat conduction, as well as the behavior of elastic and visco-plastic solids. Actually, the model treats viscous and inviscid fluids as generalized visco-plastic solids. This is achieved via a stiff source term that accounts for strain relaxation in the evolution equations of A. Also heat conduction is included via a first order hyperbolic system for the thermal impulse, from which the heat flux is computed. The governing PDE system is hyperbolic and fully consistent with the first and the second principle of thermodynamics. It is also fundamentally different from first order Maxwell–Cattaneo-type relaxation models based on extended irreversible thermodynamics. The HPR model represents therefore a novel and unified description of continuum mechanics, which applies at the same time to fluid mechanics and solid mechanics. In this paper, the direct connection between the HPR model and the classical hyperbolic–parabolic Navier–Stokes–Fourier theory is established for the first time via a formal asymptotic analysis in the stiff relaxation limit. From a numerical point of view, the governing partial differential equations are very challenging, since they form a large nonlinear hyperbolic PDE system that includes stiff source terms and non-conservative products. We apply the successful family of one-step ADER–WENO finite volume (FV) and ADER discontinuous Galerkin (DG) finite element schemes to the HPR model in the stiff relaxation limit, and compare the numerical results with exact or numerical reference solutions obtained for the Euler and Navier–Stokes equations. Numerical convergence results are also provided. To show the universality of the HPR model, the paper is rounded-off with an application to wave propagation in elastic solids, for which one only needs to switch off the strain relaxation source term in the governing PDE system. We provide various examples showing that for the purpose of flow visualization, the distortion tensor A seems to be particularly useful.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Cumulative Energy Demand indicator (CED), life cycle based, for industrial waste management decision making

Highlights: • We developed a methodology useful to environmentally compare industrial waste management options. • The methodology uses a Net Energy Demand indicator which is life cycle based. • The method was simplified to be widely used, thus avoiding cost driven decisions. • This methodology is useful for governments to promote the best environmental options. • This methodology can be widely used by other countries or regions around the world. - Abstract: Life cycle thinking is a good approach to be used for environmental decision-support, although the complexity of the Life Cycle Assessment (LCA) studies sometimes prevents their wide use. The purpose of this paper is to show how LCA methodology can be simplified to be more useful for certain applications. In order to improve waste management in Catalonia (Spain), a Cumulative Energy Demand indicator (LCA-based) has been used to obtain four mathematical models to help the government in the decision of preventing or allowing a specific waste from going out of the borders. The conceptual equations and all the subsequent developments and assumptions made to obtain the simplified models are presented. One of the four models is discussed in detail, presenting the final simplified equation to be subsequently used by the government in decision making. The resulting model has been found to be scientifically robust, simple to implement and, above all, fulfilling its purpose: the limitation of waste transport out of Catalonia unless the waste recovery operations are significantly better and justify this transport.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Design and performance analysis of all-optical 1:4 and 1:8 high speed demultiplexer using InGaAsP–InP optical microring resonator in Z-domain

All-optical 1:4 and 1:8 demultiplexers are designed and demonstrated using the process of photon absorption that is induced using an external optical pumping of wavelength 532 nm in InGaAsP–InP add-drop microring resonators. The 1:4 demultiplexer is designed with two cascaded optical microring resonators (OMRRs) and 1:8 demultiplexer is designed with four OMRRs. The mathematical modeling is pursued in Z-domain. The delay has been reduced by implementing a three level parallel circuit for 1:8 demultiplexer. The nonlinearity that occurs as a resonance frequency shift in OMRR due to photon energized electron–hole pairs is used to realize the optical switching operation of OMRR. The simulation is carried using MATLAB. The circuit has less propagation delay, fast switching time and can be integrated on CMOS photonic chips.

36 MATERIALS SCIENCE↗

Performance of a double pass solar air collector

Double pass counter flow solar air collector with porous material in the second air passage is one of the important and attractive design improvement that has been proposed to improve the thermal performance. This paper presents theoretical and experimental analysis of double pass solar air collector with and without porous material. A mathematical model has been developed based on volumetric heat transfer coefficient. Effects of various parameters on the thermal performance and pressure drop characteristics have been discussed. Comparison of results reveals that the thermal efficiency of double pass solar air collector with porous absorbing material is 20-25% and 30-35% higher than that of double pass solar air collector without porous absorbing material and single pass collector respectively. (author)

14 SOLAR ENERGY↗

Change in Limiting Channel Dimensions during Pneumatic Shaping of Multilayer Structures

A mathematical model is developed for determining the inert-gas pressure within rectangular channels in multilayer structures. The model permits calculation of the pressure, stress, and damage in the shaping of materials with different properties. The influence of the relative channel height on the relative limiting rounding radius of a corner element and the membrane thickness and also on the failure time for titanium (VT6S) and aluminum (AMg6) alloys is investigated. The deformation processes are described by the energetic and kinetic theories of creep and damage for viscous flow.

42 ENGINEERING↗

Effect of pump wave reflections on the excitation of a dual-wavelength vertical-cavity surface-emitting laser

The effect of pump wave reflections on the carrier generation rate and uniformity of carrier population in quantum wells (QWs) of a dual-wavelength vertical-cavity surface-emitting laser has been numerically analyzed. The laser's active region has been described within a mathematical model allowing any number of QWs and arbitrary distribution of carrier generation rate. It is shown that the optimal arrangement of blocking layers in the active region of a dual-wavelength vertical-cavity surface-emitting laser allows one to obtain a very uniform QW population. It is established that pump wave reflections significantly affect the local carrier generation rate and, therefore, the distribution of excited carriers in the laser structure.

39↗

Influence of the Length of a Torch Tongue on Heat Flow in a Burner Device

Results of mathematical modeling of the burner torch of the furnaces of steam boilers with radiating cylindrical gas volumes are presented. As a result of modeling it is established that with a short torch tongue, the heat flows to the burner device can be significant and the service life of the burners reduced. By means of calculations it is established that with a 1.5 – 2-fold increase in the length of the torch tongue at constant power, heat flow decreases 2 – 3-fold in the burner device and the useful life of the latter increases to 10 years and more.

42 ENGINEERING↗

Control design and robustness analysis of a ball and plate system by using polynomial chaos

In this paper, we present a mathematical model of a ball and plate system, a control law and analyze its robustness properties by using the polynomial chaos method. The ball rolls without slipping. There is an auxiliary robot vision system that determines the bodies' positions and velocities, and is used for control purposes. The actuators are to orthogonal DC motors, that changes the plate's angles with the ground. The model is a extension of the ball and beam system and is highly nonlinear. The system is decoupled in two independent equations for coordinates x and y. Finally, the resulting nonlinear closed loop systems are analyzed by the polynomial chaos methodology, which considers that some system parameters are random variables, and generates statistical data that can be used in the robustness analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal Analysis of the Vulnerability of the Spacesuit Battery Design to Short-Circuit Conditions (Presentation)

NREL researchers created a mathematical model of a full 16p-5s spacesuit battery for NASA that captures electrical/thermal behavior during shorts to assess the vulnerability of the battery to pack-internal (cell-external) shorts. They found that relocating the short from battery pack-external (experimental validation) to pack-internal (modeling study) causes substantial additional heating ofcells, which can lead to cell thermal runaway. All three layers of the bank-to-bank separator must fail for the pack-internal short scenario to occur. This finding emphasizes the imperative of battery pack assembly cleanliness. The design is tolerant to pack-internal shorts when stored at 0% state of charge.

25 ENERGY STORAGE↗

Phase Portraits of Dynamical Equations of Motion of a Rigid Body in a Resistive Medium

We consider a mathematical model of the influence of a medium on a rigid body with a specific shape of its surface. In this model, we take into account the additional dependence of the moment of the interaction force on the angular velocity of the body. We present a complete system of equations of motion under the quasi-stationarity conditions. The dynamical part of equations of motion forms an independent third-order system, which contains, in its turn, an independent secondorder subsystem. We ovtain a new family of phase portraits on the phase cylinder of quasi-velocities, which differs from families obtained earlier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

OPTICAL PROPERTIES OF IRON SILICATES IN THE INFRARED TO MILLIMETER AS A FUNCTION OF WAVELENGTH AND TEMPERATURE

The Optical Properties of Astronomical Silicates with Infrared Techniques program utilizes multiple instruments to provide spectral data over a wide range of temperatures and wavelengths. Experimental methods include Vector Network Analyzer and Fourier transform spectroscopy transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5 to 300 K, across the infrared and millimeter portion of the spectrum (from 2.5 to 10,000 {mu}m or 4000 to 1 cm{sup -1}).

79 ASTRONOMY AND ASTROPHYSICS↗

The generation and accumulation of interstitial atoms and vacancies in alloys with L1{sub 2} superstructure

The dependences of the point defect concentration (interstitial atoms and vacancies) on the deformation degree were calculated for the L1{sub 2} alloys with the high and low antiphase boundaries (APB) energy in terms of the mathematical model of the work and thermal strengthening of the alloys with the L1{sub 2} structure; the concentration of the point defects generated and annihilated in the process of deformation was estimated. It was found that the main part of the point defects generating during plastic deformation annihilates, the residual density of the deformation point defects does not exceed 10{sup −5}.

36 MATERIALS SCIENCE↗