Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “laser processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Two-body dissociation of formic acid following double ionization by ultrafast laser pulses

We studied the fragmentation of planar formic acid (HCOOH) molecules following their double ionization by intense ultrashort laser pulses. Deuterium tagging (i.e., HCOOD) combined with coincidence momentum imaging measurements of all fragment ions enabled determination of the role of the hydroxyl and carboxyl hydrogen atoms in the breakup. Specifically, we observe a strong preference for the hydroxyl (OD) group to remain intact in a ${\mathrm{HCOOD}}^{2+}{\rightarrow}{\mathrm{OD}}^{+}+{\mathrm{HCO}}^{+}$ fragmentation, which is an order of magnitude more likely than ${\mathrm{OH}}^{+}+{\mathrm{DCO}}^{+}$. An even larger preference for breaking the H-C bond over the O-H bond is observed in the ${\mathrm{H}}^{+}+{\mathrm{DCO}}_{2}^{+}$ and ${\mathrm{D}}^{+}+{\mathrm{HCO}}_{2}^{+}$ deprotonation channels. Bond rearrangement, leading to ${\mathrm{H}}_{2}^{+}$ or ${\mathrm{H}}_{2}{\mathrm{O}}^{+}$ formation, exhibits no isotopic preference. The kinetic-energy-release distributions of the ${\mathrm{OH}}^{+}+{\mathrm{DCO}}^{+}$ and ${\mathrm{O}}^{+}+{\mathrm{H}}_{2}{\mathrm{CO}}^{+}$ breakup channels suggest that more than one process contributes to these final products, although further theoretical work is needed to identify the specific paths.

74 ATOMIC AND MOLECULAR PHYSICS↗

Analysis of He-N2-CO2-UF6 laser system

Direct nuclear pumping of a CO2 laser system by the U-235(n,ff)FF reaction is examined. Calculations based on a kinetic model which takes into consideration all relevant kinetic processes indicate that dissociation of CO2 prevents the efficient operation of a nuclear pumped CO2 laser system.

Hassan, H. A.↗

2D Semiconductor Nanosheets Supported on Colloidal Quantum Cubes

Two-dimensional (2D) colloidal nanocrystals bridge the physics of epitaxial quantum wells with the synthetic scalability of solution-processed nanomaterials, making them an attractive platform for future LEDs, lasers, and photodetectors. However, their strongly anisotropic 2D morphology complicates the formation of close-packed films required for electrically interfaced devices. Here, we address this limitation by introducing semiconductor quantum cubes (QCs) in which 2D CdSe nanosheets are conformally grown on six faces of CdS cubic scaffolds. This architecture preserves excitonic physics of quasi-2D nanosheets while leveraging the mechanical rigidity and self-assembly of nanocubes, enabling close-packed films with improved electronic coupling and electrical conductivity. By extending CdS/CdSe QCs into a CdS/CdSe/CdS core/shell/shell structure, we realize 2D quantum wells that exhibit unusual multiexciton behavior. In particular, CdS/CdSe/CdS QCs show repulsive exciton–exciton interactions, which decouple CdSe facets into quasi-independent emitters. This leads to the suppressed Auger recombination, long multiexciton lifetimes, and broadband optical gain. The demonstrated combination of unusual multiexciton photophysics and favorable film self-assembly characteristics in QCs presents opportunities for solution-processed optoelectronic devices.

perovskites↗

Reduced Model of Ionization Lag in Intense Laser-Produced Plasmas

A physics-based empirical formula is derived to predict the ionization lag in underdense plasmas generated by an intense laser. Time-dependent nonlocal thermodynamic equilibrium calculations demonstrate significantly delayed ionization, due to rapid changes in plasma conditions, which critically impacts plasma properties such as opacity, emissivity, and heat transport. The reduced model, based on these calculations, enables the estimation of ionization lag without requiring in-depth knowledge of nonlocal thermodynamic equilibrium modeling. Furthermore, modeling reveals that the two-step ionization process—collisional excitation followed by photoionization—plays a crucial role in this ionization delay, with collisional excitation setting the timescale for ionization. Simulations across a range of elements, from beryllium to germanium, demonstrate that ionization lag is a widespread phenomenon, underscoring the importance of incorporating such processes into ionization modeling in radiation hydrodynamic simulations for various laser-plasma experiments.

direct drive↗

Perspectives on relativistic electron–positron pair plasma experiments of astrophysical relevance using high-power lasers

The study of relativistic electron–positron pair plasmas is both of fundamental physics interest and important to understand the processes that shape the magnetic field dynamics, particle acceleration, and radiation emission in high-energy astrophysical environments. Although it is highly desirable to study relativistic pair plasmas in the laboratory, their generation and control constitutes a critical challenge. Significant experimental and theoretical progress has been made over recent years to explore the use of intense lasers to produce dense relativistic pair plasma in the laboratory and study the basic collective plasma processes associated with these systems. Important challenges remain in terms of improving the number of pairs, system size, and control over the charge neutrality required to establish laboratory platforms that can expand our understanding of relativistic pair plasma and help validate underlying models in conditions relevant to high-energy astrophysical phenomena. Furthermore, we highlight recent progress in this field, discuss the main challenges, and the exciting prospects for studying relativistic pair plasmas and astrophysics relevant instabilities in the laboratory in the near future.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Combining femtosecond laser annealing and shallow ion implantation for local color center creation in diamond

A common technique for color center creation in wideband gap semiconductors employs ion implantation and a subsequent thermal annealing. In general, this annealing process is conducted in a vacuum oven. Here, we exploit the annealing based on femtosecond laser pulses. For that purpose, we implant fluorine ions at 54 keV and chlorine ions at 74 keV in diamond and perform micrometer precise annealing using focused femtosecond laser pulses at 800 ± (30) nm with different pulse numbers and repetition rates. In this way, we were able to create shallow spots with color centers of varying brightness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation and analysis of natural rain in a wind tunnel via digital image processing techniques

It is desired to simulate natural rain in a wind tunnel in order to investigate its influence on the aerodynamic characteristics of aircraft. Rain simulation nozzles have been developed and tested at JPL. Pulsed laser sheet illumination is used to photograph the droplets in the moving airstream. Digital image processing techniques are applied to these photographs for calculation of rain statistics to evaluate the performance of the nozzles. It is found that fixed hypodermic type nozzles inject too much water to simulate natural rain conditions. A modification uses two aerodynamic spinners to flex a tube in a pseudo-random fashion to distribute the water over a larger area.

Aaron, K. M.↗

Anomalous ultrafast all-optical Hall effect in gapped graphene

We propose an ultrafast all-optical anomalous Hall effect in two-dimensional (2D) semiconductors of hexagonal symmetry such as gapped graphene (GG), transition metal dichalcogenides (TMDCs), and hexagonal boron nitride (h-BN). To induce such an effect, the material is subjected to a sequence of two strong-field single-optical-cycle pulses: A chiral pump pulse followed within a few femtoseconds by a probe pulse linearly polarized in the armchair direction of the 2D lattice. Due to the effect of topological resonance, the first (pump) pulse induces a large chirality (valley polarization) in the system, while the second pulse generates a femtosecond pulse of the anomalous Hall current. The proposed effect is fundamentally the fastest all-optical anomalous Hall effect possible in nature. It can be applied to ultrafast all-optical storage and processing of information, both classical and quantum.

36 MATERIALS SCIENCE↗

Application of Machine Learning to Monitor Metal Powder-Bed Fusion Additive Manufacturing Processes

The use of additive manufacturing (AM) is increasing for high-value, critical applications across a range of disparate industries. This article presents a discussion of high-valued engineering components predominantly used in the aerospace and medical industries. Applications involving metal AM, including methods to identify pores and voids in AM materials, are the focus. The article reviews flaw formation in laser-based powder-bed fusion, summarizes sensors used for in situ process monitoring, and outlines advances made with in situ process-monitoring data to detect AM process flaws. It reviews investigations of ML-based strategies, identifies challenges and research opportunities, and presents strategies for assessing anomaly detection performance.

Reutzel, Edward W.↗

Comparison of continuum-continuum and Coulomb-laser-coupling delays from visible to midinfrared wavelengths

We compare the various proposed formulas for CLC and CC delays using analytical and numerical methods across a range of wavelengths spanning visible to midinfrared. We show that one of the CC definitions is nearly equal to the CLC delay over a range of photoelectron energies and wavelengths. We furthermore obtain alternate expressions for the CC delays. These expressions are simpler to use and show close correspondence to the CLC delays. Based on this correspondence, we suggest a correction to the CLC delay for low-energy electrons, where the currently used approximation breaks down. Our work provides guidance for when it is valid to treat CC and CLC delays as being equivalent.

74 ATOMIC AND MOLECULAR PHYSICS↗

Exploration of the Habitability of Mars with the SAM Suite Investigation on the 2009 Mars Science Laboratory

The 2009 Mars Science Laboratory (MSL) with a substantially larger payload capability that any other Mars rover, to date, is designed to quantitatively assess a local region on Mars as a potential habitat for present or past life. Its goals are (1) to assess past or present biological potential of a target environment, (2) to characterize geology and geochemistry at the MSL landing site, and (3) to investigate planetary processes that influence habitability. The Sample Analysis at Mars (SAM) Suite, in its final stages of integration and test, enables a sensitive search for organic molecules and chemical and isotopic analysis of martian volatiles. MSL contact and remote surface and subsurface survey Instruments establish context for these measurements and facilitate sample identification and selection. The SAM instruments are a gas chromatograph (GC), a mass spectrometer (MS), and a tunable laser spectrometer (TLS). These together with supporting sample manipulation and gas processing devices are designed to analyze either the atmospheric composition or gases extracted from solid phase samples such as rocks and fines. For example, one of the core SAM experiment sequences heats a small powdered sample of a Mars rock or soil from ambient to -1300 K in a controlled manner while continuously monitoring evolved gases. This is followed by GCMS analysis of released organics. The general chemical survey is complemented by a specific search for molecular classes that may be relevant to life including atmospheric methane and its carbon isotope with the TLS and biomarkers with the GCMS.

Mahaffy, P. R.↗

Ultrasmooth Epitaxial Pt Thin Films Grown by Pulsed Laser Deposition

Platinum (Pt) thin films are useful in applications requiring high-conductivity electrodes with excellent thermal and chemical stability. Ultrasmooth and epitaxial Pt thin films with single-crystalline domains have the added benefit of providing ideal templates for the subsequent growth of heteroepitaxial structures. Here, we grow epitaxial Pt (111) electrodes (ca. 30 nm thick) on sapphire (α-Al 2 O 3 (0001)) substrates with pulsed laser deposition. This versatile technique allows control of the growth process and fabrication of films with carefully tailored parameters. X-ray scattering, atomic-force microscopy, and electron microscopy provide structural characterization of the films. Various gaseous atmospheres and temperatures were explored to achieve epitaxial growth of films with low roughness. A two-step (500 °C/300 °C) growth process was developed, yielding films with improved epitaxy without compromising roughness. The resulting films possess ultrasmooth interfaces (<3 Å) and high electrical conductivity (6.9 × 10 6 S/m). Finally, Pt films were used as current collectors and templates to grow lithium manganese oxide (LiMn 2 O 4 (111)) epitaxial thin films, a cathode material used in Li-ion batteries. In conclusion, using a solid-state ionogel electrolyte, the films were highly stable when electrochemically cycled in the 3.5-4.3 V vs Li/Li + range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of slurry targets for high repetition-rate x-ray free electron laser experiments

Combining an x-ray free electron laser with a high-power laser driver enables the study of equations-of-state, high strain-rate deformation processes, structural phase transitions, and transformation pathways as a function of pressure to hundreds of GPa along different thermodynamic compression paths. Future high repetition-rate laser operation will enable data to be accumulated at >1 Hz, which poses a number of experimental challenges, including the need to rapidly replenish the target. Here, we present a combined shock compression and an x-ray diffraction study on epoxy (50% vol.)-crystalline grains (50% vol.) slurry targets, which can be fashioned into extruded ribbons for high repetition-rate operation. For shock-loaded NaCl-slurry samples, we observe pressure, density, and temperature states within the embedded NaCl grains consistent with observations from shock-compressed single-crystal NaCl.

47 OTHER INSTRUMENTATION↗

Advanced Solar-propelled Cargo Spacecraft for Mars Missions

Three concepts for an unmanned, solar powered, cargo spacecraft for Mars support missions were investigated. These spacecraft are designed to carry a 50,000 kg payload from a low Earth orbit to a low Mars orbit. Each design uses a distinctly different propulsion system: A Solar Radiation Absorption (SRA) system, a Solar-Pumped Laser (SPL) system and a solar powered magnetoplasmadynamic (MPD) arc system. The SRA directly converts solar energy to thermal energy in the propellant through a novel process. In the SPL system, a pair of solar-pumped, multi-megawatt, CO2 lasers in sunsynchronous Earth orbit converts solar energy to laser energy. The MPD system used indium phosphide solar cells to convert sunlight to electricity, which powers the propulsion system. Various orbital transfer options are examined for these concepts. In the SRA system, the mother ship transfers the payload into a very high Earth orbit and a small auxiliary propulsion system boosts the payload into a Hohmann transfer to Mars. The SPL spacecraft and the SPL powered spacecraft return to Earth for subsequent missions. The MPD propelled spacecraft, however, remains at Mars as an orbiting space station. A patched conic approximation was used to determine a heliocentric interplanetary transfer orbit for the MPD propelled spacecraft. All three solar-powered spacecraft use an aerobrake procedure to place the payload into a low Mars parking orbit. The payload delivery times range from 160 days to 873 days (2.39 years).

Auziasdeturenne, Jacqueline↗

Theory and experiment of low transitions in CO discharge lasers

A self-consistent model which couples the kinetics of the electrons and heavy particles with the optical and fluid dynamic processes has been employed to identify the various parameters and explain the mechanism responsible for producing low-lying transitions in slow-flowing CO lasers. Both theory and experiment indicate that low-lying transitions can be achieved at low temperatures for low pressures (or low-flow rates) together with high partial pressures of He and N2. The role of N2 has been identified as an additive responsible for reducing the electron temperature to a range where the transfer of electrical power to the lower vibrational modes of CO is optimum.

Sidney, B.↗

Accuracy of the time-averaged ponderomotive approximation for laser-plasma accelerator modeling

Reliable modeling of laser-plasma accelerators, where a short and intense laser pulse propagates in an underdense plasma over long distances, is a computationally challenging task. This is due to the great disparity among the scales involved in the modeling, ranging from the micrometer scale of the laser wavelength to, for instance, the meter scale of the laser-plasma interaction length for a multi-GeV-class laser-plasma accelerator. To reduce such imbalance, the time-averaged ponderomotive approximation may be used, where the plasma particle dynamics is analytically averaged over the laser frequency, and only spatiotemporal scales associated with the laser envelope are retained in the calculations, resulting in significant computational savings. Here, we characterize the accuracy and robustness of the time-averaged ponderomotive approximation for a range of laser parameters of interest for present and future laser-plasma accelerators, and we show that the error introduced by the averaging process is small in all relevant cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dephasing of ion beams as magnetic vortex acceleration regime transitions into a bubble-like field structure

The interaction of an ultra-intense laser pulse with a near critical density target results in the formation of a plasma channel, a strong azimuthal magnetic field and moving vortices. An application of this is the generation of energetic and collimated ion beams via magnetic vortex acceleration. The optimized regime of magnetic vortex acceleration is becoming experimentally accessible with new high intensity laser beamlines coming online and advances made in near critical density target fabrication. The robustness of the acceleration mechanism with realistic experimental conditions is examined with three-dimensional simulations. Of particular interest is the acceleration performance with different laser temporal contrast conditions, in some cases leading to pre-expanded target profiles prior to the arrival of the main pulse. Preplasma effects on the structure of the accelerating fields are explored, including a detailed analysis of the ion beam properties and the efficiency of the process. Improved scaling laws for the magnetic vortex acceleration mechanism, including the laser focal spot size effects, are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Highly Emissive Semi-Ladder-Type Copolymers, Aggregation State, and Solution-Processed Organic Light-Emitting Transistor

An organic light-emitting transistor (OLET) integrates the logic function of a field-effect transistor (FET) with electroluminescence of a light-emitting diode (LED) into a single device. This has the potential to play an important role in smart displays, electrically pumped organic laser, and other flexible electronic devices. For achieving high-performance solution-processed OLET, three semiladder copolymers—TPTI-CC, TPTI-C, and TPTI-F—were developed in this study. It was found that variation in the chemical structure lead to significant differences in energy level, emission color, and intermolecular aggregation. High photoluminescence quantum yields (PLQY) was obtained in these three polymers. Solution-processed trilayered OLET devices were fabricated, which exhibited strong electroluminescence, balanced charge mobility, and external quantum efficiency (EQE) of 2.8%.

36 MATERIALS SCIENCE↗