Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “intermittency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Mathematical Modeling of Hydroxide-Exchange-Membrane Water Electrolyzer

Water electrolyzers can transform intermittent renewable energy like solar energy and wind energy into the chemical energy of hydrogen with zero greenhouse-gas emissions. The hydroxide-exchange membrane electrolyzer (HEME) combines the capability to produce pressurized hydrogen with the advantage of being able to use low or non-platinum group metal (PGM) electrocatalysts in the alkaline environment.1 Hydroxide salts, for example, KOH, are added to the HEME water feed on both anode and cathode to improve its performance. However, the specific mechanism of performance improvement still needs to be further understood. In addition, at high current densities, bubble evolution can result in mass-transport limitations, a less well studied phenomena. Mathematical modeling is ideal to explore these issues as it is cost and time efficient and can deconvolute the physics, processes, and observed phenomena and study the applied-voltage breakdown. In this work, we extend our previously developed 1D two-phase continuum model2 to study the varies processes in the HEME and provide insights on performance optimizations. First, the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) kinetics at different hydroxide concentrations have been studied by rotating disk electrodes (RDE) and implemented in the model. Then, the model is calibrated and validated against experimental HEME polarization curves for different KOH concentrations as a liquid electrolyte. The model clearly shows a performance increase with increasing KOH concentrations, which is consistent with the experimental results. The reduced ohmic resistance and increased electrochemical active surface area (ECSA) are the two main reasons for performance increase. The large amount of hydroxide in the liquid electrolyte not only helps to distribute the reactant hydroxide throughout the catalyst layer (CL), which reduces ohmic loss, but also enables reaction at the interface between the liquid electrolyte and electrocatalyst, which increases the ECSA. Applied-voltage breakdown demonstrates that the electrolyzer performance is dominated by anode kinetics and ohmic loss. A comparison with the DI water feed shows a more uniform current distribution in the anode CL when KOH is added, which indicates a higher utilization of the CL. Second, we present modeling on the effects of bubble coverage. As gas evolves, part of the ECSA is minimized due to bubble coverage. To account for this effect, an empirical relationship between the fractional bubble coverage and the current density is implemented in the model.3 The model shows this bubble coverage effect is more pronounced at large current densities with DI water feed. Acknowledgements This work was funded under the HydroGEN Consortium by the Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, of the U. S. Department of Energy under contract number DE-AC02-05CH11231. References R. Abbasi, B. P. Setzler, S. Lin, J. Wang, Y. Zhao, H. Xu, B. Pivovar, B. Tian, X. Chen, G. Wu and Y. Yan, 31, 1805876 (2019). L. N. Stanislaw, M. R. Gerhardt and A. Z. Weber, ECS Transactions, 92, 767 (2019). H. Vogt and R. J. Balzer, Electrochimica Acta, 50, 2073 (2005).

Liu, Jiangjin↗

Virtual Analysis of Gas-Diffusion-Electrode CO 2 Electrolyzers

The electrochemical reduction of CO 2 (CO2R) to value-added products is an attractive technology for tackling the rising atmospheric CO 2 levels and storing intermittent renewable energy into chemical bonds. Fundamental understanding of CO 2 R has progressed significantly in recent years and is critical in the development of CO 2 R to liquid-fuel electrolyzers, where gas-diffusion electrodes (GDEs) have been shown to be key enabling architectures. Various designs have been proposed and studied in the literature to enhance overall selectivity, rates, and maximize the conversion of CO 2 , the latter of which is only now being recognized as a critical issue. In this respect, there is a need to explore the governing phenomena inherent in these architectures to enable optimization. Mathematical modeling is ideally suited to tackle and explore these multiphysics interactions and provide virtual design analysis. In this talk, we discuss modeling methodologies and physics inherent in these devices and present our recent modeling of GDEs for CO 2 reduction. Here, we specifically examine the impacts of multiphase flow and related phenomena on overall cell performance. We then explore the performance and limitations of various cell designs guided by simulation results and examine potential methods for improving water management and tuning catalyst selectivity including the use of different anion-exchange and bipolar membranes. Finally, we discuss the disparities in local environments between aqueous and GDE devices and propose strategies to reduce the gap in knowledge between the two systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

OpenRES

The OpenRES is an open-source library of intermittent energy resources developed in the JModelica.org platform, and provides capability for performing long-term power grid dynamic simulation with renewable ancillary services (e.g., load ramp, frequency and voltage regulation).

Qin, Yining↗

Sunlamp

The purpose of this model was to facilitate the design of a control system that uses fine grained control of residential and small commercial HVAC loads to counterbalance voltage swings caused by intermittent solar power sources (e.g., rooftop panels) installed in that distribution circuit. Included is the source code and pre-compiled 64 bit dll for adding building HVAC loads to an OpenDSS distribution circuit. As written, the Makefile assumes you are using the Microsoft C++ development tools.

Nutaro, JamesJ↗

GRAF-Plan for Vietnam

Evaluates the reserve requirements for power system balancing areas based on variability and uncertainty of load as well as wind and solar generation scenarios. The tool uses minute‐by‐minute site‐specific generation and load information, as well as information from generation and load forecasting algorithms used in the balancing areas. The Balancing‐Plan Tool can be used directly by utility planners and operators to aid in the integration of intermittent renewable resources. The tool provides reserve requirements of various kinds, such as day‐ahead, load following and regulation, as well as estimates the capacity of the generation fleet to provide the require reserves.

Campbell, Allison↗

Stochastic Integration of Renewable Energy Technologies Based on Polynomial Expa

The software can be used to determine how different intermittent renewable energy technologies interact when supplying an electrical load to a building. By taking defined capacity factors for various time periods and the rated power for different technologies, the software calculates the percentage of the time the power system involving multiple technologies is in a certain state, i.e. the possible combinations and the percent of time each occurs. The user is able to determine how much power would be purchased from a utility and how much would be returned.

Walker, HowardAndrew↗

Determinants of the efficacy of HIV latency-reversing agents and implications for drug and treatment design

HIV eradication studies have focused on developing latency-reversing agents (LRAs). However, it is not understood how the rate of latent reservoir reduction is affected by different steps in the process of latency reversal. Furthermore, as current LRAs are host-directed, LRA treatment is likely to be intermittent to avoid host toxicities. Few careful studies of the serial effects of pulsatile LRA treatment have yet been done. This lack of clarity makes it difficult to evaluate the efficacy of candidate LRAs or predict long-term treatment outcomes. Here, we constructed a mathematical model that describes the dynamics of latently infected cells under LRA treatment. Model analysis showed that, in addition to increasing the immune recognition and clearance of infected cells, the duration of HIV antigen expression (i.e., the period of vulnerability) plays an important role in determining the efficacy of LRAs, especially if effective clearance is achieved. Patients may benefit from pulsatile LRA exposures compared with continuous LRA exposures if the period of vulnerability is long and the clearance rate is high, both in the presence and absence of an LRA. Overall, the model framework serves as a useful tool to evaluate the efficacy and the rational design of LRAs and combination strategies.

60 APPLIED LIFE SCIENCES↗

Decadal Variability of Asian–Australian Monsoon–ENSO–TBO Relationships

A set of dynamically coupled ocean–atmosphere mechanisms has previously been proposed for the Asia–Pacific tropics to produce a dominant biennial component of interannual variability [the tropospheric biennial oscillation (TBO)]. Namely, a strong Asian–Australian monsoon is often associated with negative SST anomalies in the equatorial eastern Pacific and a negative Indian Ocean dipole in northern fall between the strong Indian monsoon and strong Australian monsoon, and tends to be followed by a weak monsoon and positive SST anomalies in the Pacific the following year and so on. These connections are communicated through the large-scale east–west (Walker) circulation that involves the full depth of the troposphere. However, the Asia–Pacific climate system is characterized by intermittent decadal fluctuations whereby the TBO during some time periods is more pronounced than others. Observations and models are analyzed to identify processes that make the system less biennial at certain times due to one or some combination of the following: increased latitudinal extent of Pacific trade winds and wider cold tongue; warmer tropical Pacific compared to tropical Indian Ocean that weakens trade winds and reduces coupling strength; eastward shift of the Walker circulation; reduced interannual variability of Pacific and/or Indian Ocean SSTs. Decadal time-scale SST variability associated with the interdecadal Pacific oscillation (IPO) has been shown to alter the TBO over the Indo-Pacific region by contributing changes in either some or all of the four factors listed above. Analysis of a multicentury control run of the Community Climate System Model, version 4 (CCSM4), shows that this decadal modulation of interannual variability is transferred via the Walker circulation to the Asian–Australian monsoon region, thus affecting the TBO and monsoon–Pacific connections. Understanding these processes is important to be able to evaluate decadal predictions and longer-term climate change in the Asia–Pacific region.

54 ENVIRONMENTAL SCIENCES↗

Summer Aerosol and Trace Gas Observations in Houston, Texas Using an Adaptable Mobile Facility

An aerosol container featuring a shared inlet system was deployed to Houston, Texas in July 2022, enabling direct, high-time-resolution in situ measurements of aerosols and trace gases. The internal rack system and floorplan was designed for adaptable modularity to elucidate aerosol physicochemical processes at fine scales. The design allowed for the deployment of a core instrument suite and additional customized research grade instruments. A heterogeneous mixture of aerosols was observed during three regimes: (1) intermittent black carbon (BC) and diurnal variations in aerosol chemical composition, (2) observed particle growth associated with SO 2 , (3) transported supermicron dust. The high variability of observed particles and gases in high time resolution indicated a complex urban area with multiple local and regional sources and processes. Particle growth rates of 7–16 nm/hr were observed for submicron particles during periods when SO 2 was >0.5 ppbv. Two periods of multi-day long-range transport events of dust from the African Sahara were observed in the supermicron and submicron particle modes with total mass concentrations up to 30 μg m −3 . Aerosol scattering angstrom exponents and extinction coefficients (B ext ) increased with humidity as a function of particle composition. The measurements demonstrate collaborative capabilities that can be used to increase observations of aerosol processing, microphysical and optical properties, internal mixing state, and supermicron aerosol that are not parameterized or missing in global Earth energy system models.

54 ENVIRONMENTAL SCIENCES↗

Path Properties of Atmospheric Transitions: Illustration with a Low-Order Sudden Stratospheric Warming Model

Many rare weather events, including hurricanes, droughts, and floods, dramatically impact human life. To accurately forecast these events and characterize their climatology requires specialized mathematical techniques to fully leverage the limited data that are available. Here we describe transition path theory (TPT), a framework originally developed for molecular simulation, and argue that it is a useful paradigm for developing mechanistic understanding of rare climate events. TPT provides a method to calculate statistical properties of the paths into the event. As an initial demonstration of the utility of TPT, we analyze a low-order model of sudden stratospheric warming (SSW), a dramatic disturbance to the polar vortex that can induce extreme cold spells at the surface in the midlatitudes. SSW events pose a major challenge for seasonal weather prediction because of their rapid, complex onset and development. Climate models struggle to capture the long-term statistics of SSW, owing to their diversity and intermittent nature. We use a stochastically forced Holton–Mass-type model with two stable states, corresponding to radiative equilibrium and a vacillating SSW-like regime. In this stochastic bistable setting, from certain probabilistic forecasts TPT facilitates estimation of dominant transition pathways and return times of transitions. These “dynamical statistics” are obtained by solving partial differential equations in the model’s phase space. With future application to more complex models, TPT and its constituent quantities promise to improve the predictability of extreme weather events through both generation and principled evaluation of forecasts.

54 ENVIRONMENTAL SCIENCES↗

Idealized Large-Eddy Simulations of Stratocumulus Advecting over Cold Water. Part I: Boundary Layer Decoupling

Abstract We explore the decoupling physics of a stratocumulus-topped boundary layer (STBL) moving over cooler water, a situation mimicking warm-air advection (WADV). We simulate an initially well-mixed STBL over a doubly periodic domain with the sea surface temperature decreasing linearly over time using the System for Atmospheric Modeling large-eddy model. Due to the surface cooling, the STBL becomes increasingly stably stratified, manifested as a near-surface temperature inversion topped by a well-mixed cloud-containing layer. Unlike the stably stratified STBL in cold-air advection (CADV) that is characterized by cumulus coupling, the stratocumulus deck in the WADV is unambiguously decoupled from the sea surface, manifested as weakly negative buoyancy flux throughout the subcloud layer. Without the influxes of buoyancy from the surface, the convective circulation in the well-mixed cloud-containing layer is driven by cloud-top radiative cooling. In such a regime, the downdrafts propel the circulation, in contrast to that in CADV regime for which the cumulus updrafts play a more determinant role. Such a contrast in convection regime explains the difference in many aspects of the STBLs including the entrainment rate, cloud homogeneity, vertical exchanges of heat and moisture, and lifetime of the stratocumulus deck, with the last being subject to a more thorough investigation in Part II. Finally, we investigate under what conditions a secondary stratus near the surface (or fog) can form in the WADV. We found that weaker subsidence favors the formation of fog whereas a more rapid surface cooling rate does not. Significant Statement The low-lying blanketlike clouds, called stratocumulus (Sc), reflect much incoming sunlight, substantially modulating Earth’s temperature. While much is known about how the Sc evolves when it moves over warmer water, few studies examine the opposite situation of Sc moving over colder water. We used a high-resolution numerical model to simulate such a case. When moving over cold water, the Sc becomes unambiguously decoupled from the water surface, distinctive from its warm counterpart in which the Sc interacts with the water surface via intermittent cauliflower-like clouds called cumulus clouds. Such decoupling influences many aspects of the Sc–sea surface system, which combine to alter the ability of the Sc to reflect sunlight, thereby influencing the climate. This work laid the foundation for future work that quantifies the contribution of such a decoupled Sc regime to Earth’s radiative budget and climate change.

54 ENVIRONMENTAL SCIENCES↗

Synchronization of Alternative Models in a Supermodel and the Learning of Critical Behavior

“Supermodeling” climate by allowing different models to assimilate data from one another in run time has been shown to give results superior to those of any one model and superior to any weighted average of model outputs. The only free parameters, connection strengths between corresponding variables in each pair of models, are determined using some form of machine learning. It is demonstrated that supermodeling succeeds because near critical states, interscale interactions are important but unresolved processes cannot be effectively represented diagnostically in any single parameterization scheme. In two examples, a pair of toy quasigeostrophic (QG) channel models of the midlatitudes and a pair of ECHAM5 models of the tropical Pacific atmosphere with a common ocean, supermodels dynamically combine parameterization schemes so as to capture criticality, associated critical structures, and the supporting scale interactions. The QG supermodeling scheme extends a previous configuration in which two such models synchronize with intermodel connections only between medium-scale components of the flow; here the connections are trained against a third “real” model. Intermittent blocking patterns characterize the critical behavior thus obtained, even where such patterns are missing in the constituent models. In the ECHAM-based climate supermodel, the corresponding critical structure is the single ITCZ pattern, a pattern that occurs in neither of the constituent models. In conclusion, for supermodels of both types, power spectra indicate enhanced interscale interactions in frequency or energy ranges of physical interest, in agreement with observed data, and supporting a generalized form of the self-organized criticality hypothesis.

54 ENVIRONMENTAL SCIENCES↗

Laparoscopic Isolated Total Caudate Lobectomy for Hepatocellular Carcinoma Located in the Paracaval Portion of the Cirrhotic Liver

Background: Despite the widespread use of laparoscopic hepatectomies in past decades, laparoscopic isolated total caudate lobectomy for hepatocellular carcinoma (HCC) remains challenging,{sup 1,2} especially for patients with cirrhosis. Moreover, a laparoscopic isolated total caudate lobectomy for HCC originating in the paracaval portion of the caudate lobe is very rare. We herein present a video showing laparoscopic total caudate lobectomy for a cirrhotic patient with HCC located in the paracaval portion of the caudate lobe. Methods: A 58-year-old woman who suffered from hepatitis C virus-related cirrhosis was admitted to our institution. The preoperative computed tomography showed a 2.5 × 2.0 cm liver mass located in segment I that was very close to the right hepatic pedicle. Although her liver function was Child–Pugh A, the indocyanine green (ICG)-15 test was high at 10.9%. Right hepatectomy plus caudate lobectomy was not adopted because of the severe cirrhosis and the elevated ICG-15. Thus, laparoscopic isolated total caudate lobectomy was contemplated. Results: The patient was placed in the supine position. After full mobilization, the caudate lobe was exposed. The third porta of the liver was then dissected and the short hepatic veins were controlled with clips and LigaSure. The dissection was finished when the whole third porta of the liver was freed. Subsequently, the portal branches to the caudate lobe were ligated and cut. The combination between the left- and right-sided laparoscopic approaches was used to transect liver parenchyma. The superficial parenchyma was divided using an harmonic scalpel, while the deeper tissue was divided using a Cavitron ultrasonic aspirator (CUSA). The Pringle maneuver was used intermittently during the parenchymal transection as necessary. In the left-sided approach, the caudate lobe was resected along the left and middle hepatic vein toward the right side, to expose the dorsal semicircle of the right hepatic vein. In the right-sided approach, the resection started from the right border of the process portion to the root of the right hepatic vein in the cranial direction. Finally, the whole caudate lobe was resected and the three main hepatic veins were exposed on the cutting plane. The specimen was removed from suprapubic incision. The operative time was 300 min and the total Pringle time was 50 min. The postoperative course was uneventful. Conclusions: A laparoscopic isolated total caudate lobectomy for HCC located in the paracaval portion of the cirrhotic liver seems to be feasible and safe in selected patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Robotic Left Hepatectomy and Roux-en-Y Hepaticojejunostomy After Bile Duct Injury

Background: Bile duct injuries after cholecystectomy remain a major concern because their incidence has not changed through the years despite technical advances. This video presents a robotic left hepatectomy and Roux-en-Y hepaticojejunostomy as a treatment for a complex bile duct injury after laparoscopic cholecystectomy. Methods: A 52-year-old man underwent laparoscopic cholecystectomy at another institution 8 years previously, which resulted in a bile duct injury. His postoperative period was complicated by jaundice and cholangitis. He was treated with endoscopic retrograde cholangiopancreatography and multiple endoprostheses for 3 years, after which the endoprostheses were removed, and he was sent to the authors’ institution. Computed tomography showed that the left liver had signs of disturbed perfusion and dilation of the left intrahepatic bile duct. The patient was asymptomatic and refused any further attempt at surgical correction of the lesion. He was accompanied for 5 years. Magnetic resonance imaging showed progressive atrophy of the left liver. Finally, 3 months before this writing, he presented with intermittent episodes of cholangitis. A multidisciplinary team decided to perform left hepatectomy with Roux-en-Y hepatojejunostomy via a robotic approach. The left liver was atrophied, and left hepatectomy was performed. Fluorescence imaging was used to identify the right bile duct. At opening of the right bile duct, small stones were found and removed. Antecolic Roux-en-Y hepaticojejunostomy then was performed. Results: The operative time was 335 min. Recovery was uneventful, and the patient was discharged on postoperative day 4. Conclusions: Robotic repair of bile duct injuries is feasible and safe, even when liver resection is necessary. This video may help oncologic surgeons to perform this complex procedure.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Novel Noise-Aware Classical Optimizer for Variational Quantum Algorithms

A key component of variational quantum algorithms (VQAs) is the choice of classical optimizer employed to update the parameterization of an ansatz. It is well recognized that quantum algorithms will, for the foreseeable future, necessarily be run on noisy devices with limited fidelities. Thus, the evaluation of an objective function (e.g., the guiding function in the quantum approximate optimization algorithm (QAOA) or the expectation of the electronic Hamiltonian in variational quantum eigensolver (VQE)) required by a classical optimizer is subject not only to stochastic error from estimating an expected value but also to error resulting from intermittent hardware noise. Model-based derivative-free optimization methods have emerged as popular choices of a classical optimizer in the noisy VQA setting, based on empirical studies. However, these optimization methods were not explicitly designed with the consideration of noise. In this work we adapt recent developments from the “noise-aware numerical optimization” literature to these commonly used derivative-free model-based methods. We introduce the key defining characteristics of these novel noise-aware derivative-free model-based methods that separate them from standard model-based methods. In conclusion, we study an implementation of such noise-aware derivative-free model-based methods and compare its performance on demonstrative VQA simulations to classical solvers packaged in scikit-quant.

classical optimizers↗

Microanalysis of carbonate cement δ 18 O in a CO 2 -storage system seal: Insights into the diagenetic history of the Eau Claire Formation (Upper Cambrian), Illinois Basin

Oxygen isotope (δ 18 O) zonation in carbonate mineral cements is often employed as a proxy record (typically with millimeter-scale resolution) of changing temperature regimes during different stages of sediment diagenesis. Recent advances in secondary ion mass spectrometry allow for highly precise and accurate determinations of cement δ 18 O values to be made in situ on a micrometer scale, thus significantly increasing the spatial resolution available to studies of diagenesis in sandstone–shale and carbonate systems. Chemo-isotopically zoned dolomite–ankerite cements within shaly sandstone beds of the predominantly silty–shaly Eau Claire Formation (Cambrian, Illinois Basin) were investigated, revealing the following: with increasing depth of burial (from <0.5 to ~2 km [<1500 to 6500 ft]), cement δ 18 O values decrease from a high of approximately 24‰ down to approximately 14‰ (on the Vienna standard mean ocean water [VSMOW] scale, equivalent to -6.5‰ to -16.5‰ on the Vienna Peedee belemnite [VPDB] scale). The observed cross-basin trend is largely consistent with cements having formed in response to progressive sediment burial and heating. Within the context of independent burial and thermal history models for the Illinois Basin, cementation began soon after deposition and continued intermittently into the mid-Permian. Finally, however, temperatures in excess of burial model predictions are inferred at the time of latest ankerite cement precipitation, which we propose overlapped in time with conductive heating of the Eau Claire Formation (a closed system) from under- and overlying sandstone aquifers that channeled the flow of hot, Mississippi Valley–type mineralizing brines during the mid-Permian (ca. 270 Ma).

58 GEOSCIENCES↗

Modeling and validating tritium transfer in a grassland ecosystem in response to {sup 3}H releases

In this paper a radioecological model (TOCATTA) for tritium transfer in a grassland ecosystem developed on an hourly time-step basis is proposed and compared with the first data set obtained in the vicinity of the AREVA-NC reprocessing plant of La Hague (France). The TOCATTA model aims at simulating dynamics of tritium transfer in agricultural soil and plant ecosystems exposed to time-varying HTO concentrations in air water vapour and possibly in irrigation and rain water. In the present study, gaseous releases of tritium from the AREVA NC nuclear reprocessing plant in normal operation can be intense and intermittent over a period of less than 24 hours. A first comparison of the model predictions with the field data has shown that TOCATTA should be improved in terms of kinetics of tritium transfer.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Laser-induced incandescence measurements of soot in turbulent pool fires

We present what we believe to be the first application of the laser-induced incandescence (LII) technique to large-scale fire testing. The construction of an LII instrument for fire measurements is presented in detail. Soot volume fraction imaging from 2 m diameter pool fires burning blended toluene/methanol liquid fuels is demonstrated along with a detailed report of measurement uncertainty in the challenging pool fire environment. Our LII instrument relies upon remotely located laser, optical, and detection systems and the insertion of water-cooled, fiber-bundle-coupled collection optics into the fire plume. Calibration of the instrument was performed using an ethylene/air laminar diffusion flame produced by a Santoro-type burner, which allowed for the extraction of absolute soot volume fractions from the LII images. Single-laser-shot two-dimensional images of the soot layer structure are presented with very high volumetric spatial resolution of the order of 10{sup -5} cm{sup 3}. Probability density functions of the soot volume fraction fluctuations are constructed from the large LII image ensembles. The results illustrate a highly intermittent soot fluctuation field with potentially large macroscale soot structures and clipped soot probability densities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗