Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “function composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Impact of tuning CO 2 -philicity in polydimethylsiloxane-based membranes for carbon dioxide separation

Amidoxime-functionalized polydimethylsiloxane (AO-PDMSPNB) membranes with various amidoxime compositions were synthesized via ring-opening metathesis polymerization followed by post-polymerization modification. Compared to other previously reported PDMS-based membranes, the amidoxime-functionalized membranes show enhanced CO 2 permeability and CO 2 /N 2 selectivity. The overall gas separation performance (CO 2 permeability 6800 Barrer; CO 2 /N 2 selectivity 19) of the highest performing membrane exceeds the Robeson upper bound line, and the excellent permeability of the copolymer itself provides great potential for real world applications where huge volumes of gases are separated. This study details how tuning the CO 2 -philicity within rubbery polymer matrices influences gas transport properties. Key parameters for tuning gas transport properties are discussed, and the experimental results show good consistency with theoretical calculations. Finally, this study provides a roadmap to enhancing gas separation performance in rubbery polymers by tuning gas solubility selectivity.

54 ENVIRONMENTAL SCIENCES↗

Design guidance for ferrites: Insights from density functional theory on magnetic properties

A grand challenge in materials research is identifying the relationship between composition and performance. Herein, we explore this relationship for magnetic properties, specifically magnetic saturation (M s ) and magnetocrystalline anisotropy energy (K) of ferrites. Ferrites are materials derived from magnetite (chemical formula = Fe 3 O 4 ) that comprise metallic elements such as Fe, Mn, Ni, Co, Cu and Zn. Experimentally, synthesizing and characterizing ferrites is time consuming. Further, selection of compositions to achieve particular magnetic properties currently relies on intuition. To address this, in this work, density functional theory (DFT) is used to predict M s and K for 571 ferrite structures. These structures are primarily double-substituted non-stoichiometric ferrites with formulae M1 x M2 y Fe 3–x–y O 4 , where M1 and M2 can be Mn, Ni, Co, Cu and/or Zn and 0 ≤ x ≤ 1 and y = 1–x. Calculated magnetic properties for the structures in this study vary from 0.04 × 10 5 to 9.6 × 10 5 A m −1 for M s and from 0.02 × 10 5 to 14.08 × 10 5 J m −3 for K. All structures are made publicly available in a FAIR database.

36 MATERIALS SCIENCE↗

Coverage, repulsion, and reactivity of hydrogen on High-Entropy alloys

Modeling hydrogen evolution reaction (HER) activity probability on IrPdPtRhRu(1 1 1) high-entropy alloys. Determining hydrogen coverages based on ligand effects and generalized hydrogen–hydrogen repulsion. The rate of H 2 formation is highly impacted by the level of hydrogen coverage on the catalyst surface. In search of optimal catalytic properties high-entropy alloys (HEA) are promising candidates that utilize the compositional space of multiple elements. Based on simulations of HEA model (1 1 1) surfaces with a range of hydrogen coverages, distributions of binding energies are used to construct a framework that approximates the probability that adsorbed hydrogen may lead to the formation of H 2 as a function of applied potential. By optimizing the alloy compositions for the highest activity probability at given potentials the best and most efficient catalyst candidates for HER can be identified. Treating hydrogen–hydrogen repulsion effects and binding energy separately, we find that the repulsion is larger for HEAs than for pure metals. Differing isotherm slopes in the mean adsorption and desorption energies demonstrate a possible hysteresis for hydrogen adsorption on HEAs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

String in Horava-Lifshitz gravity

We generalize recent analysis of the dynamics of point particle in Horava-Lifshitz background to the case of string probe when we replace the Hamiltonian constraint of the Polyakov string with the constraint that breaks Lorentz invariance of target space-time. Then, we find corresponding Lagrangian and argue that the world sheet theory is invariant under foliation-preserving diffeomorphism. Finally, we discuss the Hamiltonian dynamics and show that this is well defined on condition that the world sheet lapse function obeys the projectability condition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Species interactions amplify functional group responses to elevated CO 2 and N enrichment in a 24‐year grassland experiment

Abstract Plant functional groups (FGs) differ in their response to global changes, although species within those groups also vary in such responses. Both species and FG responses to global change are likely influenced by species interactions such as inter‐specific competition and facilitation, which are prevalent in species mixtures but not monocultures. As most studies focus on responses of plants growing in either monocultures or mixtures, but rarely both, it remains unclear how interspecific interactions in diverse ecological communities, especially among species in different FGs, modify FG responses to global changes. To address these issues, we leveraged data from a 16‐species, 24‐year perennial grassland experiment to examine plant FG biomass responses to atmospheric CO 2 , and N inputs at different planted diversity. FGs differed in their responses to N and CO 2 treatments in monocultures. Such differences were amplified in mixtures, where N enrichment strongly increased C3 grass success at ambient CO 2 and C4 grass success at elevated CO 2 . Legumes declined with N enrichment in mixtures at both CO 2 levels and increased with elevated CO 2 in the initial years of the experiment. Our results suggest that previous studies that considered responses to global changes in monocultures may underestimate biomass changes in diverse communities where interspecific interactions can amplify responses. Such effects of interspecific interactions on responses of FGs to global change may impact community composition over time and consequently influence ecosystem functions.

Mohanbabu, Neha↗

Review of selective laser melting: Materials and applications

Selective Laser Melting (SLM) is a particular rapid prototyping, 3D printing, or Additive Manufacturing (AM) technique designed to use high power-density laser to melt and fuse metallic powders. A component is built by selectively melting and fusing powders within and between layers. The SLM technique is also commonly known as direct selective laser sintering, LaserCusing, and direct metal laser sintering, and this technique has been proven to produce near net-shape parts up to 99.9% relative density. This enables the process to build near full density functional parts and has viable economic benefits. Recent developments of fibre optics and high-power laser have also enabled SLM to process different metallic materials, such as copper, aluminium, and tungsten. Similarly, this has also opened up research opportunities in SLM of ceramic and composite materials. The review presents the SLM process and some of the common physical phenomena associated with this AM technology. It then focuses on the following areas: (a) applications of SLM materials and (b) mechanical properties of SLM parts achieved in research publications. The review is not meant to put a ceiling on the capabilities of the SLM process but to enable readers to have an overview on the material properties achieved by the SLM process so far. Trends in research of SLM are also elaborated in the last section.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Protection of the female reproductive system from natural and artificial insults

Described are methods for protecting the female reproductive system against natural and artificial insults by administering to women a composition comprising an agent that antagonizes one or more acid sphingomyelinase (ASMase) gene products. Specifically, methods disclosed herein serve to protect women's germline from damage resulting from cancer therapy regimens including chemotherapy or radiotherapy. In one aspect, the method preserves, enhances, or revives ovarian function in women, by administering to women a composition containing sphingosine-1-phosphate, or an analog thereof. Also disclosed are methods to prevent or ameliorate menopausal syndromes and to improve in vitro fertilization techniques.

Tilly, Jonathan L↗

Functional mapping reveals mechanistic clusters for OER catalysis across (Cu–Mn–Ta–Co–Sn–Fe)O x composition and pH space

Identification of stable electrocatalysts for the oxygen evolution reaction (OER) remains a primary challenge in materials for energy. The pH-dependent activity is known for very few catalysts, prompting our exploration of a broad range of catalysts using high throughput experiments and data science. This approach enables the largest screening of OER activity and operational stability to date, as illustrated through investigation of the (Cu-Mn-Ta-Co-Sn-Fe)O x composition space as 15 unique quaternary composition spaces. In total 2121 compositions are tested between pH 3 and 13, creating an extensive dataset whose interpretation requires development and application of data science to provide insights that are both beyond the standard composition-activity relationships and beyond human interpretation due to the dimensionality of the dataset. In this work, three distinct classes of OER catalysts are identified with respect to pH-dependent activity and stability. The large-scale screening reveals a new class of Co-rich OER catalysts that can be compositionally tailored to a specified pH and perform on par with state-of-the-art acid OER catalysts.

36 MATERIALS SCIENCE↗

Understanding and Strategies for Controlled Interfacial Phenomena in Lithium-Ion Batteries and Beyond

Electrolyte chemistry and properties and electrode structure and chemical properties particularly at the interfaces are crucial for the development of advanced battery components. This project focused on elucidating the roles of the electrolyte and electrode on the formation and evolution of the SEI layer and cell electrochemical performance on silicon and on Li metal anodes. For Si nano/microstructures we evaluated lithiation, volume changes, reactivity, and chemo-mechanical transformations as functions of nanoparticle size, shape, presence of coatings, electrolyte composition, electron leakage to the electrolyte, and cycling. For Li metal anodes we provided detailed analyses of the electrode and electrolyte effects on interfacial reactivity and as a function of microstructural evolution and underlying stochasticity as dendrites nucleate and grow. We thoroughly investigated and simulated how the chemistry of the various components of the electrolyte and the electrode architecture may affect the electrochemical reactions as well as cell degradation. A multiscale modeling approach was utilized, where atomistic simulations informed about the microscopic behavior of the system, and intermediate time and length scales were investigated with mesoscopic models. Results were also tested against selected experiments from our collaborators. The combined theoretical-experimental strategy saves costs by utilizing predictions from computational analyses to guide experimentation.

25 ENERGY STORAGE↗

Testing Nesting DXTRAN Spheres for Neutron Transport in Air

The deterministic transport sphere (DXTRAN sphere) is a technology that can be utilized in MCNP for improving sampling in the vicinity of a particular geometry, when the solid angle, between the source and particular geometry, is small. At a collision event, a DXTRAN particle is created and deterministically transported to the DXTRAN sphere, while the colliding particle (NONDXTRAN particle) continues transporting as if no DXTRAN event had occurred. Weight is balanced by killing the NONDXTRAN particle when traversing the DXTRAN sphere. If set up correctly, the DXTRAN particle placed on the DXTRAN sphere has a high probability of interacting with the geometry within the DXTRAN sphere. The Central Limit Theorem (CLT) states that the estimated mean approaches a normal distribution with known variance as the number of random samples grows sufficiently large. In reality the variance is seldom known and therefore must be estimated. In a Monte Carlo calculation, one must determine when the number of random samples is sufficiently large for the CLT to be satisfied. For the CLT to be satisfied, the first two moments (mean and variance) must exist. The second moment, the variance of a normal distribution is estimated. The slope test, which uses the largest 201 history scores of each tally fluctuation chart (TFC) bin fit to a Pareto function, is used to determine if the largest history scores decrease faster than 1/x{sup 3}. If the slope is less than 3, then enough histories have not yet been sampled such to meet the second moment existence requirement of the CLT. Usually, a slope of less than 3 indicates that the effects of high weight scores have not been satisfactorily sampled; such a consequence can also be manifested in examining trends in the 4. moment, the variance of the variance (VOV). For example, when examining the TFC, if the VOV is monotonically decreasing for a few sets of histories and then drastically increases for the next set of histories, chances are a rare high weight score, significantly greater than the average score, was encountered. As a result of the 1/R{sup 2} term, a point detector can achieve an extremely high weight, much greater than the average, as the distance from collision to point detector approaches zero. To remedy this difficulty, a 'radius of exclusion' is applied, where within the radius of exclusion 'the point detector estimate is assumed to be the average flux uniformly distributed'. A DXTRAN sphere can suffer from the same weight fluctuation as collisions in the vicinity of the DXTRAN sphere produce much larger weights than collisions happening far from the DXTRAN sphere. If the rare large weight put on the DXTRAN sphere then scores in a tally, there will be a significant increase in the VOV and the slope may drop below 3. To compliment that analysis, here we utilize an air composition and density that varies as a function of altitude, detailing the trials and tribulations of attempting to pass the 10 statistical checks for a variety of single and nested DXTRAN sphere approaches. The objective here is to illuminate important considerations for radiation transport problems with small solid angles in a scatter medium of few mean free paths (MFPs)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Unusual electrical conductivity driven by localized stoichiometry modification at vertical epitaxial interfaces

Precise control of lattice mismatch accommodation and interfacial cation diffusion is critical to modulate correlated functionalities in epitaxial heterostructures, particularly when the interface composition is positioned near a compositional phase transition boundary. Here we select La 1-x Sr x MnO 3 (LSMO) as a prototype phase transition oxide and establish vertical epitaxial interfaces with NiO for exploring the strong interplay between strain accommodation, stoichiometry modification, and localized electron transport across the interface. It is found that localized stoichiometry modification overcomes the dead layer problem plaguing LSMO and leads to strongly directional conductivity, as manifested by a more than three orders of magnitude difference between out-of-plane and in-plane conductivity. Comprehensive atomic scale structural characterization and transport measurements reveal that this emerging behavior is created by a compositional change produced by preferential cation diffusion that pushes the LSMO phase transition from insulating into metallic within an ultrathin interface region. This study explores the nature of unusual electrical conductivity at vertical epitaxial interfaces and highlights the beneficial role of controllable cation diffusion that enables emerging functionalities for a broad range of potential applications such as memristors, spintronic devices, and novel nanoelectronic devices using strongly correlated materials.

36 MATERIALS SCIENCE↗

Dielectric function in the NIR-VUV spectral range of (In{sub x}Ga{sub 1−x}){sub 2}O{sub 3} thin films

We determined the dielectric function of the alloy system (In{sub x}Ga{sub 1−x}){sub 2}O{sub 3} by spectroscopic ellipsometry in the wide spectral range from 0.5 eV to 8.5 eV and for In contents ranging from x = 0.02 to x = 0.61. The predicted optical transitions for binary, monoclinic β-Ga{sub 2}O{sub 3}, and cubic bcc-In{sub 2}O{sub 3} are well reflected by the change of the dielectric functions' lineshape as a function of the In content. In an intermediate composition range with phase-separated material (x ≈ 0.3…0.4), the lineshape differs considerably, which we assign to the presence of the high-pressure rhombohedral InGaO{sub 3}-II phase, which we also observe in Raman experiments in this range. By model analysis of the dielectric function, we derived spectra of the refractive index and the absorption coefficient and energy parameters of electronic band-band transitions. We discuss the sub-band gap absorption tail in relation to the influence of the In 4d orbitals on the valence bands. The data presented here provide a basis for a deeper understanding of the electronic properties of this technologically important material system and may be useful for device engineering.

36 MATERIALS SCIENCE↗

Tunable catalytic properties of bi-functional mixed oxides in ethanol conversion to high value compounds

tA highly versatile ethanol conversion process to selectively generate high value compounds is pre-sented here. By changing the reaction temperature, ethanol can be selectively converted to >C2alcohols/oxygenates or phenolic compounds over hydrotalcite derived bi-functional MgO–Al2O3cata-lyst via complex cascade mechanism. Reaction temperature plays a role in whether aldol condensationor the acetone formation is the path taken in changing the product composition. This article containsthe catalytic activity comparison between the mono-functional and physical mixture counterpart to thehydrotalcite derived mixed oxides and the detailed discussion on the reaction mechanisms.

Ramasamy, Karthikeyan K.↗

Structure and Reactivity of Binuclear Cu Active Sites in Cu-CHA Zeolites for Stoichiometric Partial Methane Oxidation to Methanol

Aluminosilicate zeolites exchanged with copper ions facilitate partial methane oxidation (PMO) to methanol in stoichiometric oxidation and reduction cycles, yet the identities of active Cu sites and details of the reaction mechanism remain debated. Here, we use the high-symmetry chabazite (CHA) zeolite framework as a model support to probe the relationship between bulk composition, Cu speciation, and response to various oxidizing and reducing treatments. Density functional theory and first-principles thermodynamics combined with statistical models reveal that Cu speciation and composition depend strongly on Al configuration and external gas conditions. Cu-CHA samples were synthesized to survey broad regions of Si/Al and Cu/Al composition space and framework Al proximity. Characterization by in situ X-ray absorption and UV–visible spectroscopy during exposure to different oxidation conditions reveal that the extent of Cu oxidation is sensitive to activation conditions and thus that both kinetic and thermodynamic factors influence Cu oxidizability in a given material. Similar characterizations during CO reduction reveal that CO titrates Cu 2+ in amounts suggesting the presence of both O- and O 2 -bridged species. In contrast, CH 4 and autoreduction (He) treatments reduce similar but smaller numbers of Cu sites than CO, implicating O 2 -bridged Cu dimers as a potential common intermediate in the former reduction pathways. Furthermore, a systematic increase in methanol yields (per Cu) in stoichiometric PMO cycles increase with the fraction of binuclear O x -bridged Cu sites suggests these species as active sites, as depicted in an updated PMO reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting the formation of fractionally doped perovskite oxides by a function-confined machine learning method

Abstract Fractionally doped perovskites oxides (FDPOs) have demonstrated ubiquitous applications such as energy conversion, storage and harvesting, catalysis, sensor, superconductor, ferroelectric, piezoelectric, magnetic, and luminescence. Hence, an accurate, cost-effective, and easy-to-use methodology to discover new compositions is much needed. Here, we developed a function-confined machine learning methodology to discover new FDPOs with high prediction accuracy from limited experimental data. By focusing on a specific application, namely solar thermochemical hydrogen production, we collected 632 training data and defined 21 desirable features. Our gradient boosting classifier model achieved a high prediction accuracy of 95.4% and a high F1 score of 0.921. Furthermore, when verified on additional 36 experimental data from existing literature, the model showed a prediction accuracy of 94.4%. With the help of this machine learning approach, we identified and synthesized 11 new FDPO compositions, 7 of which are relevant for solar thermochemical hydrogen production. We believe this confined machine learning methodology can be used to discover, from limited data, FDPOs with other specific application purposes.

08 HYDROGEN↗

Tailoring electrocatalytic activity of in situ crafted perovskite oxide nanocrystals via size and dopant control

Significance The ability to scrutinize the correlation of dimension, composition, and dopant to electrocatalytic performance renders the development of highly active electrocatalysts. This work reports a general and robust strategy for crafting uniform perovskite oxide nanoparticles (i.e., BaTiO 3 and La- and Co-doped BaTiO 3 ) with controlled sizes and dopant compositions by employing amphiphilic star-like diblock copolymers as nanoreactors. Their size- and dopant-dependent oxygen reduction reaction (ORR) performances are unveiled. Particularly, La- and Co-doped BaTiO 3 nanoparticles exhibit markedly improved ORR activities over the pristine counterparts due to reduced free energy barrier of ORR and increased conductivity as substantiated by density functional theory. The nanoreactor strategy could be conveniently extended to yield various functional nanomaterials of interest with tailored sizes and compositions for electrocatalysis.

36 MATERIALS SCIENCE↗

Decoding Zeolite Crystallization and Stage III in Nuclear Waste Glasses by Coupled Modeling and Experiments

Under specific conditions of pH and temperature, nuclear waste immobilization borosilicate glasses may exhibit a sudden acceleration in their corrosion kinetics (stage III)—a behavior that has been associated with the formation of zeolite crystals. Such accelerated dissolution may compromise the integrity of nuclear wasteforms placed in geological depositories. However, thus far, none of the available models is able to predict the thermodynamic propensity and kinetics of zeolite precipitation as a function of the solution conditions due to (i) a lack of fundamental knowledge regarding the nucleation & growth mechanisms of zeolitic phases, (ii) uncertainty regarding the compositions (types) of zeolites that may form and the rate-limiting step in their precipitation as a function of the solution conditions, and (iii) the complexities that arise due to the vast parametric space (i.e., solution chemistry, temperature, number of secondary phases, etc.) that encompass these systems under conditions of environmental exposure. To resolve these challenges, this project aimed to unambiguously identify the thermodynamic propensity for zeolite precipitation and the kinetics thereof as a function of the solution conditions (composition, pH, and temperature). To achieve this goal: 1) We identified the solution conditions and zeolite phases relevant to nuclear glass dissolution. 2) We performed a series of ab initio molecular dynamics (AIMD) simulations to compute the thermodynamic properties of a group of characteristic zeolites that features a large range of compositions, various hydration levels, a wide range of framework structures, and partial atomic site occupancies. 3) We released a first-of-a-kind self-consistent thermodynamic database that can be used to assess the kinetics and the stability fields of zeolitic phases within a Gibbs energy minimization (GEM) framework. 4) We developed a robust geochemical modeling method allowing us to predict the stability of secondary phases (including zeolites, calcium–silicate–hydrate gels, and clays) upon the dissolution of nuclear waste immobilization glasses. 5) We introduced a model that predicts the dissolution kinetics of a series of borosilicate nuclear waste immobilization glasses in terms of the topology of their atomic network. 6) We investigated the roles of the solution composition on the crystallization kinetics of phillipsite zeolites and tobermorite silicate hydrates. Via PNNL’s collaboration and engagement, this project directly supports DOE’s nuclear waste immobilization activities by offering a technical, science-based foundation that will (i) facilitate predictions of the long-term corrosion rates and extents of existing nuclear waste immobilization glasses to help ensure safe and successful vitrification operations, (ii) inform the development of advanced glass formulations with enhanced durability, and, (iii) enable cost-savings that result from making more decisive and hence less conservative predictions while offering higher levels of nuclear waste embedment in smaller, more compact glass volumes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Programmable Site‐Specific Functionalization of DNA Origami with Polynucleotide Brushes

Abstract Combining surface‐initiated, TdT (terminal deoxynucleotidyl transferase) catalyzed enzymatic polymerization (SI‐TcEP) with precisely engineered DNA origami nanostructures (DONs) presents an innovative pathway for the generation of stable, polynucleotide brush‐functionalized DNA nanostructures. We demonstrate that SI‐TcEP can site‐specifically pattern DONs with brushes containing both natural and non‐natural nucleotides. The brush functionalization can be precisely controlled in terms of the location of initiation sites on the origami core and the brush height and composition. Coarse‐grained simulations predict the conformation of the brush‐functionalized DONs that agree well with the experimentally observed morphologies. We find that polynucleotide brush‐functionalization increases the nuclease resistance of DONs significantly, and that this stability can be spatially programmed through the site‐specific growth of polynucleotide brushes. The ability to site‐specifically decorate DONs with brushes of natural and non‐natural nucleotides provides access to a large range of functionalized DON architectures that would allow for further supramolecular assembly, and for potential applications in smart nanoscale delivery systems.

Yang, Yunqi↗