Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Sources of error and methods to improve accuracy in interface state density analysis using quasi-static capacitance–voltage measurements in wide bandgap semiconductors

Characterizing interface trap states in commercial wide bandgap devices using frequency-based measurements requires unconventionally high probing frequencies to account for both fast and slow traps associated with wide bandgap materials. The C - ψs technique has been suggested as a viable quasi-static method for determining the interface trap state densities in wide bandgap systems, but the results are shown to be susceptible to errors in the analysis procedure. Here this work explores the primary sources of errors present in the C - ψs technique using an analytical model that describes the apparent response for wide bandgap MOS capacitor devices. Measurement noise is shown to greatly impact the linear fitting routine of the 1/C$^{*2}_s$ vs Ψ s plot to calibrate the additive constant in the surface potential/gate voltage relationship, and an inexact knowledge of the oxide capacitance is also shown to impede interface trap state analysis near the band edge. In addition, a slight nonlinearity that is typically present throughout the 1/C$^{*2}_s$ vs Ψ s plot hinders the accurate estimation of interface trap densities, which is demonstrated for a fabricated n-SiC MOS capacitor device. Methods are suggested to improve quasi-static analysis, including a novel method to determine an approximate integration constant without relying on a linear fitting routine.

42 ENGINEERING↗
DOE OSTI2025

Simultaneous inference of equation of state parameters and unknown data errors with uncertainty quantification via hierarchical Bayesian posterior maximization

Equations of state (EOSs) are a key component in running hydrodynamic simulations as they relate the thermodynamic states for the material. The Davis reactants EOS is commonly used for modeling high explosives (HEs), and the EOS model parameters are calibrated using material specific data. The calibrations are often performed with uncertainty quantification via Bayesian inference to account for uncertainty in the data and generate ensembles of likely parameters. However, there are relatively few HE data sets to use for calibration and many are historical and lack error information. In this work, we simultaneously calibrate the Davis reactants EOS model parameters and unknown data error terms for the high explosive PBX 9501. To quantify the uncertainty in the models and the data, we use a Bayesian framework for the calibration and compute the hierarchical Bayesian posterior distribution with both a posteriori maximization approach and Markov Chain Monte Carlo. In general, we find that, given our assumptions, the two approaches result in similar calibrated parameters, posterior covariance matrices, and insights about the parameters but that the posterior maximization requires far less computational resources.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

TYPE Ia SUPERNOVA DISTANCE MODULUS BIAS AND DISPERSION FROM K-CORRECTION ERRORS: A DIRECT MEASUREMENT USING LIGHT CURVE FITS TO OBSERVED SPECTRAL TIME SERIES

We estimate systematic errors due to K-corrections in standard photometric analyses of high-redshift Type Ia supernovae. Errors due to K-correction occur when the spectral template model underlying the light curve fitter poorly represents the actual supernova spectral energy distribution, meaning that the distance modulus cannot be recovered accurately. In order to quantify this effect, synthetic photometry is performed on artificially redshifted spectrophotometric data from 119 low-redshift supernovae from the Nearby Supernova Factory, and the resulting light curves are fit with a conventional light curve fitter. We measure the variation in the standardized magnitude that would be fit for a given supernova if located at a range of redshifts and observed with various filter sets corresponding to current and future supernova surveys. We find significant variation in the measurements of the same supernovae placed at different redshifts regardless of filters used, which causes dispersion greater than ∼0.05 mag for measurements of photometry using the Sloan-like filters and a bias that corresponds to a 0.03 shift in w when applied to an outside data set. To test the result of a shift in supernova population or environment at higher redshifts, we repeat our calculations with the addition of a reweighting of the supernovae as a function of redshift and find that this strongly affects the results and would have repercussions for cosmology. We discuss possible methods to reduce the contribution of the K-correction bias and uncertainty.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

PULSAR TIMING ERRORS FROM ASYNCHRONOUS MULTI-FREQUENCY SAMPLING OF DISPERSION MEASURE VARIATIONS

Free electrons in the interstellar medium cause frequency-dependent delays in pulse arrival times due to both scattering and dispersion. Multi-frequency measurements are used to estimate and remove dispersion delays. In this paper, we focus on the effect of any non-simultaneity of multi-frequency observations on dispersive delay estimation and removal. Interstellar density variations combined with changes in the line of sight from pulsar and observer motions cause dispersion measure (DM) variations with an approximately power-law power spectrum, augmented in some cases by linear trends. We simulate time series, estimate the magnitude and statistical properties of timing errors that result from non-simultaneous observations, and derive prescriptions for data acquisition that are needed in order to achieve a specified timing precision. For nearby, highly stable pulsars, measurements need to be simultaneous to within about one day in order for the timing error from asynchronous DM correction to be less than about 10 ns. We discuss how timing precision improves when increasing the number of dual-frequency observations used in DM estimation for a given epoch. For a Kolmogorov wavenumber spectrum, we find about a factor of two improvement in precision timing when increasing from two to three observations but diminishing returns thereafter.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

An Investigation of Coupling of the Internal Kink Mode to Error Field Correction Coils in Tokamaks

The coupling of the internal kink to an external m/=1/1 pertubation if studied for profiles that are known to result in a saturated internal kink in the limit of a cylindrical tokamak. It is found from 3D equilibrium calculations that, for A 30 circular plasmas and A=3 elliptical shapes, this coupling of the boundary perturbation to the internal kink is strong; the amplitude of the m/n=1/1 structure at q=1 is large compared to the amplitude applied at the plasma boundary. It is proposed that this excitation, which could readily be applied with error field correction coils, be explored as a mechanism for controlling sawtooth amplitudes in high performance tokamak discharges. This saturated internal kink, resulting from small field errors in proposed as an explanation for the TEXTOR measurements of q0 and the distinction between sawtooth effects on the q-profile observed in TEXTOR and DIII-D.

q0↗
DOE OSTI2019

PIV/BOS synthetic image generation in variable density environments for error analysis and experiment design

In this work, we present an image generation methodology based on ray tracing that can be used to render realistic images of Particle Image Velocimetry (PIV) and Background Oriented Schlieren (BOS) experiments in the presence of density/refractive index gradients. This methodology enables the simulation of aero-thermodynamics experiments for experiment design, error, and uncertainty analysis. Images are generated by emanating light rays from the particles or dot pattern, and propagating them through the density gradient field and the optical elements, up to the camera sensor. The rendered images are realistic, and can replicate the features of a given experimental setup, like optical aberrations and perspective effects, which can be deliberately introduced for error analysis. We demonstrate this methodology by simulating a BOS experiment with a known density field obtained from direct numerical simulations (DNS) of homogeneous buoyancy driven turbulence, and comparing the light ray displacements from ray tracing to results from BOS theory. The light ray displacements show good agreement with the reference data. This methodology provides a framework for further development of simulation tools for use in experiment design and development of image analysis tools for PIV and BOS applications. Finally, an implementation of the proposed methodology in a Python-CUDA program is made available as an open source software for researchers.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Model-based approach to investigate equipment-induced error in pressure-waveform derived hemodynamic measurements

Advanced hemodynamic monitoring systems have provided less invasive methods for estimating pressure-derived measurements such as pressure-derived cardiac output (CO) measurements. These devices apply algorithms to arterial pressure waveforms recorded via pressure recording components that transmit the pressure signal to a pressure monitor. While standards have been developed for pressure monitoring equipment, it is unclear how the equipment-induced error can affect secondary measurements from pressure waveforms. We propose an approach for modelling different components of a pressure monitoring system and use this model-based approach to investigate the effect of different pressure recording configurations on pressure-derived hemodynamic measurements. The proposed model-based approach is a three-step process. (1) Modelling the response of pressure recording components using bench tests; (2) verifying the identified models through nonparametric equivalence tests; and (3) assessing the effects of pressure recording components on pressure-derived measurements. To delineate the application of this approach, we performed a series of model-based analyses to quantify the combined effect of a wide range of tubing configurations with various damping ratios and natural frequencies and monitors with different bandwidths on pressure waveforms and CO measurements by six pulse contour algorithms. Model-based results show the error in pressure-derived CO measurements because of tubing configurations with different natural frequencies and damping ratios. Tubing configurations with low natural frequencies (<23 Hz) altered characteristics of pressure waveforms in a way that affected the CO measurement, some by as much as 20%. Our method can serve as a tool to quantify the performance of pressure recording systems with different dynamic properties. In conclusion, this approach can be applied to investigate the effects of physiologic signal recording configurations on various pressure-derived hemodynamic measurements.

42 ENGINEERING↗
DOE OSTI2025

Impact of systematic redshift errors on the cross-correlation of the Lyman-α forest with quasars at small scales using DESI Early Data

The Dark Energy Spectroscopic Instrument (DESI) will measure millions of quasar spectra by the end of its 5 year survey. Quasar redshift errors impact the shape of the Lyman-α forest correlation functions, which can affect cosmological analyses and therefore cosmological interpretations. Here, using data from the DESI Early Data Release and the first two months of the main survey, we measure the systematic redshift error from an offset in the cross-correlation of the Lyman-α forest with quasars. We find evidence for a redshift dependent bias causing redshifts to be underestimated with increasing redshift, stemming from improper modeling of the Lyman-α optical depth in the templates used for redshift estimation. New templates were derived for the DESI Year 1 quasar sample at z > 1.6 and we found the redshift dependent bias, Δr ∥ , increased from -1.94 ± 0.15 h -1 Mpc to -0.08 ± 0.04 h -1 Mpc (-205 ± 15 km s -1 to -9.0 ± 4.0 km s -1 ). These new templates will be used to provide redshifts for the DESI Year 1 quasar sample.

Lyman alpha forest↗
DOE OSTI2019

A new stabilizing regime of tearing mode entrainment in the presence of a static error field

Uncorrected static error fields in axisymmetric fusion devices are one of few remaining serious obstacles for advancing the present tokamak-based approach to practical reactors. The disruption due to magnetohydrodynamic tearing mode locking is one of them. Recently, a hypothesis has been proposed that there may exist a self-healing stabilized regime in which the static resonant error field is effectively shielded by forcing the mode slowly to rotate inductively by the applied non-axisymmetric field, that has been developed based on non-linear, resistive, reduced MHD simulation with cylindrical single helicity model. Proof-of-principle experiments in the DIII-D device showed that the magnetic mode structure on the plasma surface is qualitatively consistent with the simulation prediction. However, radial mode profiles revealed qualitatively different behavior. This finding led to a revised hypothesis that in actual non-circular toroidal devices, a tearing layer in forced rotation induces the shielding-out process at other rational surfaces when we take into account of multi-resonant Fourier components. The time evolution of the radial penetration was supportive of this hypothesis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Fast decay of classification error in variational quantum circuits

Variational quantum circuits (VQCs) have shown great potential in near-term applications. However, the discriminative power of a VQC, in connection to its circuit architecture and depth, is not understood. To unleash the genuine discriminative power of a VQC, we propose a VQC system with the optimal classical post-processing—maximum-likelihood estimation on measuring all VQC output qubits. Via extensive numerical simulations, we find that the error of VQC quantum data classification typically decays exponentially with the circuit depth, when the VQC architecture is extensive—the number of gates does not shrink with the circuit depth. This fast error suppression ends at the saturation towards the ultimate Helstrom limit of quantum state discrimination. On the other hand, non-extensive VQCs such as quantum convolutional neural networks are sub-optimal and fail to achieve the Helstrom limit, demonstrating a trade-off between ansatz complexity and classification performance in general. To achieve the best performance for a given VQC, the optimal classical post-processing is crucial even for a binary classification problem. To simplify VQCs for near-term implementations, we find that utilizing the symmetry of the input properly can improve the performance, while oversimplification can lead to degradation.

Zhang, Bingzhi↗
DOE OSTI2024

Sensitive and error-tolerant annotation of protein-coding DNA with BATH

We present BATH, a tool for highly sensitive annotation of protein-coding DNA based on direct alignment of that DNA to a database of protein sequences or profile hidden Markov models (pHMMs). BATH is built on top of the HMMER3 code base, and simplifies the annotation workflow for pHMM-based translated sequence annotation by providing a straightforward input interface and easy-to-interpret output. BATH also introduces novel frameshift-aware algorithms to detect frameshift-inducing nucleotide insertions and deletions (indels). BATH matches the accuracy of HMMER3 for annotation of sequences containing no errors, and produces superior accuracy to all tested tools for annotation of sequences containing nucleotide indels. These results suggest that BATH should be used when high annotation sensitivity is required, particularly when frameshift errors are expected to interrupt protein-coding regions, as is true with long-read sequencing data and in the context of pseudogenes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2016

MeCorS: Metagenome-enabled error correction of single cell sequencing reads

Here we present a new tool, MeCorS, to correct chimeric reads and sequencing errors in Illumina data generated from single amplified genomes (SAGs). It uses sequence information derived from accompanying metagenome sequencing to accurately correct errors in SAG reads, even from ultra-low coverage regions. In evaluations on real data, we show that MeCorS outperforms BayesHammer, the most widely used state-of-the-art approach. MeCorS performs particularly well in correcting chimeric reads, which greatly improves both accuracy and contiguity of de novo SAG assemblies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

The impact of curation errors in the PDBBind Database on machine learning predictions of protein–protein binding affinity

The PDBBind database has been widely utilized for the computational prediction of protein–protein binding affinities. While the accuracy of the PDBBind-curated equilibrium dissociation constants (K D ) has been reported for the protein–ligand subset of the PDBBind database, the curation accuracy has not been reported for the protein–protein subset. Here, we present a detailed manual analysis for the subset of PDBBind records with PubMed Central Open Access primary publications and find that ~19% of these records had K D values that were not supported by their primary publications. The impact of these putative curation errors on the machine learning-based prediction of K D from experimental protein–protein 3D structures was evaluated and correcting the curation errors improved the Pearson correlation coefficient between measured and random forest-predicted log 10 (K D ) values by ~8 percentage points. This finding underscores the importance of dataset accuracy for computational modelling and highlights the need for more stringent curation processes when extracting information from the scientific literature.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Modelling the impact of quasar redshift errors on the full-shape analysis of correlations in the Lyman-α forest.

In preparation for the first cosmological measurements from the full shape of the Lyman-α (Lyα) forest from DESI, we must carefully model all relevant systematics that might bias our analysis. It was shown in Youles et al. (2022) that random quasar redshift errors produce a smoothing effect on the mean quasar continuum in the Lyα forest region. This, in turn, gives rise to spurious features in the Lyα autocorrelation and its cross-correlation with quasars. Using synthetic data sets based on the DESI survey, we confirm that the impact on BAO measurements is small, but that a bias is introduced to parameters which depend on the full shape of our correlations. We combine a model of this contamination in the cross-correlation (Youles et al. 2022) with a new model we introduce here for the auto-correlation. These are parametrised by 3 parameters, which, when included in a joint fit to both correlation functions, successfully eliminate any impact of redshift errors on our full-shape constraints. We also present a strategy for removing this contamination from real data, by removing ∼0.3% of correlating pairs.

cosmology↗
DOE OSTI2014

The spontaneous replication error and the mismatch discrimination mechanisms of human DNA polymerase β

To provide molecular-level insights into the spontaneous replication error and the mismatch discrimination mechanisms of human DNA polymerase β (polβ), we report four crystal structures of polβ complexed with dG•dTTP and dA•dCTP mismatches in the presence of Mg 2+ or Mn 2+ . The Mg 2+ -bound ground-state structures show that the dA•dCTP-Mg 2+ complex adopts an ‘intermediate’ protein conformation while the dG•dTTP-Mg 2+ complex adopts an open protein conformation. The Mn 2+ -bound ‘pre-chemistry-state’ structures show that the dA•dCTP-Mn2+ complex is structurally very similar to the dA•dCTP-Mg 2+ complex, whereas the dG•dTTP-Mn 2+ complex undergoes a large-scale conformational change to adopt a Watson–Crick-like dG•dTTP base pair and a closed protein conformation. These structural differences, together with our molecular dynamics simulation studies, suggest that polβ increases replication fidelity via a two-stage mismatch discrimination mechanism, where one is in the ground state and the other in the closed conformation state. In the closed conformation state, polβ appears to allow only a Watson–Crick-like conformation for purine•pyrimidine base pairs, thereby discriminating the mismatched base pairs based on their ability to form the Watson–Crick-like conformation. Overall, the present studies provide new insights into the spontaneous replication error and the replication fidelity mechanisms of polβ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Error quantification and comparison of binary neutron star gravitational waveforms from numerical relativity codes

Future gravitational wave detections of merging binary neutron star systems have the possibility to tightly constrain the equation of state of dense nuclear matter. In order to extract such constraints, gravitational waveform models need to be calibrated to accurate numerical relativity simulations of the late inspiral and merger. In this work, we take an essential step toward classifying the error and potential systematics in current generation numerical relativity simulations of merging binary neutron stars. To this end, we perform a direct comparison of two codes (fil, spec), which differ in many aspects, including the numerical methods and discretizations used and equations solved. We find that despite these different approaches, the codes are—within current numerical resolution bounds—fully consistent, and broadly comparable in cost for a given accuracy level. Our results indicate that the error in the waveforms is primarily dominated by the hydrodynamic evolution, consistent with earlier findings in the literature. Finally, we also discuss current limitations and cost estimates for numerical relativity simulations to reach the accuracies required in the era of next-generation gravitational detectors.

gravitational waves↗
DOE OSTI2026

Real-time estimators for scattering observables: A full account of finite-volume errors for quantum simulation

The real-time correlators of quantum field theories can be directly probed through new approaches to simulation, such as quantum computing and tensor networks. This provides a new framework for computing scattering observables in lattice formulations of strongly interacting theories, such as lattice quantum chromodynamics. In this paper, we prove that the proposal of real-time estimators of scattering observables is universally applicable to all scattering observables of gapped quantum field theories. All finite-volume errors are exponentially suppressed, and the rate of this suppression is controlled by the regulator considered, namely, a displacement of the spectrum of the theory into the complex plane. A partial restoration of Lorentz symmetry by averaging over different boosts gives an additional suppression of finite volume errors. Our results also apply to the simulation of wave packet scattering, where a similar averaging is performed to construct the wave packets that regulate the finite volume effects. This result represents a necessary key step toward determining a broad class of scattering observables via quantum computing that are currently inaccessible via classical computing. Such observables are relevant for various applications, including hadron spectroscopy, hadron structure, and precision tests of the Standard Model. We also comment on potential applications of our results to traditional computational schemes.

Burbano, Ivan M. [University of California, Berkel↗