Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Aerial Lidar and Geomorphic Change Detection Software- Tools for Monitoring Canyon Sediments at LANL - 18668

The Los Alamos National Laboratory Environmental Remediation program has conducted extensive geomorphic surveys of sediment deposits in the canyon bottoms within and surrounding the facility. The goal of the geomorphic surveys was to provide basic information needed to characterize chemical inventories of the sediments downstream of historical release sites. Sediment units were mapped based on depositional setting and age. Representative characterization samples were collected for each unit and submitted for chemical analysis. Chemical inventories were estimated by calculating the total volume of each depositional unit and multiplying by average chemical concentration. This method of characterization provides a spatial distribution of chemical data based on fluvial processes. In general, for the canyon bottom sediments, the higher concentrations of industrial chemicals were associated with fine-grained floodplain deposits closest to the source. Since initial characterization, many of the reaches have undergone changes in response to post-wildfire floods and severe rain events. These events impacted the channel and floodplain deposits. Much of the elevated concentrations are confined to the over-bank deposits distal from the primary channel. In order to ensure that the sediment units containing elevated chemical concentrations are stable, repeat aerial light detection and ranging (LiDAR) surveys are conducted and changes are assessed using the Geomorphic Change Detection (GCD) plug-in for ArcGIS. These tools provide high confidence uncertainty estimates and extensive areal coverage. This is a valuable method for long-term monitoring of surface sediments with low-level but widespread contaminant distributions. All of the monitored canyon bottom reaches pass risk assessment and present technically infeasible sediment removal options. Following the 2014 monsoon season, aerial LiDAR data has been collected annually and the resulting digital elevation models (DEMs) processed using the GCD method. Changes are identified using GCD and are verified by field walk downs. If erosion is identified in areas which are vulnerable to mobilizing contaminated sediment, enhanced controls can be installed to stabilize banks or other areas with high erosion potential. Annual sediment monitoring samples are collected where there is evidence for flow and deposition within the past year. Since 2014, no severe floods have been catalogued using the LiDAR surveys and GCD software. The recent rainfall/runoff events have not caused major changes to the canyon bottom channels and floodplains. Geomorphic processes identified in the monitoring results include channel aggradation and incision that over the course of a monsoon season results in minor changes to the system. Other active processes contributing to observed changes are minor slides, flows, slumps, and falls of unconsolidated sediment on steep bedrock or soil surfaces. A comprehensive baseline has been established by geomorphic mapping and characterization sampling. Periodic monitoring consists of LiDAR surveys and GCD analysis which offers an effective and defensible methodology for documenting stability of surface sediments. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Roles of Organohalide-Respiring Dehalococcoidia in Carbon Cycling

The class Dehalococcoidia within the Chloroflexi phylum comprises the obligate organohalide-respiring genera Dehalococcoides, Dehalogenimonas, and “Candidatus Dehalobium.” Knowledge of the unique ecophysiology and biochemistry of Dehalococcoidia has been largely derived from studies with enrichment cultures and isolates from sites impacted with chlorinated pollutants; however, culture-independent surveys found Dehalococcoidia sequences in marine, freshwater, and terrestrial biomes considered to be pristine (i.e., not impacted with organohalogens of anthropogenic origin). The broad environmental distribution of Dehalococcoidia, as well as other organohalide-respiring bacteria, supports the concept of active halogen cycling and the natural formation of organohalogens in various ecosystems. Dechlorination reduces recalcitrance and renders organics susceptible to metabolic oxidation by diverse microbial taxa. During reductive dechlorination, hydrogenotrophic organohalide-respiring bacteria, in particular Dehalococcoidia, can consume hydrogen to low consumption threshold concentrations (<0.3 nM) and enable syntrophic oxidation processes. These functional attributes and the broad distribution imply that Dehalococcoidia play relevant roles in carbon cycling in anoxic ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗

Nanocomposite thermite powders with improved flowability prepared by mechanical milling

Nanocomposite thermite powders can be used in reactive parts and components. Manufacturing these components requires tailoring powder particle size distributions, particle shapes, and powder flowability. Specifically, an improved flowability is desired to use such powders as feedstock in additive manufacturing. Arrested reactive milling (ARM) offers a versatile and practical approach for preparing nanocomposite thermites with fully dense particles, which will retain their structures and mixedness between reactive components while being stored, handled, and processed. However, ARM products usually have broad particle size distributions, rock-like particle shapes, and poor flowability. Here in this study, ARM is modified to include a low-energy milling step to tune the shapes and flowability of the prepared powders. Experiments are performed with aluminum-rich Al·Fe 2 O 3 thermites. After the initial nanocomposite thermite is prepared in a planetary mill, it is additionally milled at a reduced rotation rate, replacing milling balls with smaller glass beads, and adding different liquid process control agents. Powders with modified particle shapes and size distributions are obtained, which have substantially improved flowability compared to the initial material. The reactivity of the initial and modified powders is evaluated using their ignition on a heated wire, by electro-static discharge, by thermal analysis (DSC) and in constant volume explosion tests. Finally, the reactivity of the modified powders is not diminished; instead, an improved reactivity is observed for selected samples.

36 MATERIALS SCIENCE↗

Management of Legacy Enriched Uranium and Transuranic Materials at ORNL

The DOE manages an inventory of materials that contains a range of long-lived radioactive isotopes that were produced from the 1960s through the 1980s. These materials were made by irradiating targets in production reactors to produce special heavy isotopes for DOE programmatic use, scientific research, and industrial and medical applications. ORNL uses these materials in DOE’s center for production, storage, and distribution of transuranium isotopes (plutonium through californium) for the heavy-element research program and has used them as feedstock in the Calutron Electromagnetic Isotope Enrichment Facility, one of only two facilities in the world with capabilities to enrich radioisotopes in multigram quantities. Both the production reactors and enrichment facilities have been shut down, and many of these unique materials will not be produced again in the foreseeable future [1, 2]. As a result, ORNL has an inventory of radioisotopes that are being held for reuse because their potential intrinsic value to DOE, but many of these materials have no currently defined use. ORNL is undertaking an initiative to more actively manage these materials by reviewing the existing inventory to determine if the contents have programmatic use. Steps are being taken to process, repackage, and stage the materials for distribution to programmatic users or for waste disposal, primarily at WIPP. This paper describes the approach that ORNL has taken to determine whether the inventory of materials should be kept or disposed and the processes that are being used to manage or disposition the materials.

Patton, Bradley↗

Management of Legacy Enriched Uranium and Transuranic Materials at ORNL - 19062

The DOE manages an inventory of materials that contains a range of long-lived radioactive isotopes that were produced from the 1960's through the 1980's. These materials were made by irradiating targets in production reactors to produce special heavy isotopes for DOE programmatic use, scientific research, and industrial and medical applications. ORNL uses these materials in DoE's center for production, storage, and distribution of transuranium isotopes (plutonium through californium) for the heavy-element research program and has used them as feedstock in the Calutron Electromagnetic Isotope Enrichment Facility, one of only two facilities in the world with capabilities to enrich radioisotopes in multigram quantities. Both the production reactors and enrichment facilities have been shut down, and many of these unique materials will not be produced again in the foreseeable future [1, 2]. As a result, ORNL has an inventory of radioisotopes that are being held for reuse because their potential intrinsic value to DOE, but many of these materials have no currently defined use. ORNL is undertaking an initiative to more actively manage these materials by reviewing the existing inventory to determine if the contents have programmatic use. Steps are being taken to process, repackage, and stage the materials for distribution to programmatic users or for waste disposal, primarily at WIPP. This paper describes the approach that ORNL has taken to determine whether the inventory of materials should be kept or disposed and the processes that are being used to manage or disposition the materials. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

THE X-RAY FLUX DISTRIBUTION OF SAGITTARIUS A* AS SEEN BY CHANDRA

We present a statistical analysis of the X-ray flux distribution of Sgr A* from the Chandra X-Ray Observatory's 3 Ms Sgr A* X-ray Visionary Project in 2012. Our analysis indicates that the observed X-ray flux distribution can be decomposed into a steady quiescent component, represented by a Poisson process with rate Q = (5.24 ± 0.08) × 10{sup –3} counts s{sup –1}, and a variable component, represented by a power law process (dN/dF∝F {sup –ξ}, ξ=1.92{sub −0.02}{sup +0.03}). This slope matches our recently reported distribution of flare luminosities. The variability may also be described by a log-normal process with a median unabsorbed 2-8 keV flux of 1.8{sub −0.6}{sup +0.8}×10{sup −14} erg s{sup –1} cm{sup –2} and a shape parameter σ = 2.4 ± 0.2, but the power law provides a superior description of the data. In this decomposition of the flux distribution, all of the intrinsic X-ray variability of Sgr A* (spanning at least three orders of magnitude in flux) can be attributed to flaring activity, likely in the inner accretion flow. We confirm that at the faint end, the variable component contributes ∼10% of the apparent quiescent flux, as previously indicated by our statistical analysis of X-ray flares in these Chandra observations. Our flux distribution provides a new and important observational constraint on theoretical models of Sgr A*, and we use simple radiation models to explore the extent to which a statistical comparison of the X-ray and infrared can provide insights into the physics of the X-ray emission mechanism.

79 ASTRONOMY AND ASTROPHYSICS↗

Metal oxide core shell nanostructures as building blocks for efficient light emission (SISGR)

The objective of this research is to synthesize core-shell nano-structured metal oxide materials and investigate their structural, electronic and optical properties to understand the microscopic pathways governing the energy conversion process, thereby controlling and improving their efficiency. Specifically, the goal is to use a single metal oxide core-shell nanostructure and a single excitation source to generate photons with long emission lifetime over the entire visible spectrum and when controlled at the right ratio, generating white light. In order to achieve this goal, we need to control the energy transfer between light emitting elements, which dictates the control of their interatomic spacing and spatial distribution. We developed an economical wet chemical process to form the nanostructured core and to control the thickness and composition of the shell layers. With the help from using DOE funded synchrotron radiation facility, we delineated the growth mechanism of the nano-structured core and the shell layers, thereby enhancing our understanding of structure-property relation in these materials. Using the upconversion luminescence and the lifetime measurements as effective feedback to materials sysnthes is and integration, we demonstrated improved luminescence lifetimes of the core-shell nano-structures and quantified the optimal core-multi-shell structure with optimum shell thickness and composition. We developed a rare-earths co-doped LaPO 4 core-multishell structure in order to produce a single white light source. It was decided that the mutli-shell method would produce the largest increase in luminescence efficiency while limiting any energy transfer that may occur between the dopant ions. All samples resulted in emission spectra within the accepted range of white light generation based on the converted CIE color coordinates. The white light obtained varied between warm and cool white depending on the layering architecture, allowing for the utilization into a wide range of applications. With DOE’s overall mandate to reduce the US’s dependence on rare-earth elements, this work demonstrated how to make every RE atom count toward white light generation by controlling their spatial distribution thereby significantly reducing the amount needed. This is one approach toward reducing the dependence on RE elements and the strategies we developed can be used in discovering RE-free systems. The project is of benefit to the general public as it improves the optical efficiency of these materials, while reducing US’s dependence on RE elements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy

In this paper, heterogeneity of the through-thickness residual strain due to the laser shock peening (LSP) in comparison with that due to the indentation was studied in Ti-6Al-4V alloy samples. The latter is almost a quasi-static process while the former features extremely high strain-rate deformation. The synchrotron based high-energy X-ray diffraction was employed to investigate the through-thickness residual strain distribution. The studied two samples after the two processing procedures share the following features: (i) the pressure affected depths are both ~2 mm and (ii) the largest magnitudes of the compressive residual strains parallel to the surface are ~4,000 με. However, the pit depth for the indentation sample is ~9 times larger than that for the LSP. The position featuring the largest magnitude of the compressive residual strain is in the sub-surface for the indentation while it is in the surface for the LSP. Results of the elastic-visco-plastic finite element simulation for the indentation indicate that the position featuring the maximum accumulative plastic shear as defined in this paper corresponds to the location with the largest magnitude of compressive residual strain. To validate this finding, full width at half maximum (FWHM) of the X-ray diffraction profile, which is proportional to the level of the plastic deformation, is also studied. Finally, it is found that positions with the largest FWHM indeed correspond to the largest magnitude of compressive residual strain for both tests.

36 MATERIALS SCIENCE↗

Investigation of sewage sludge treatment using air plasma assisted gasification

Highlights: • Thermal air plasma assisted gasification of sewage sludge is examined. •Comparison of the process performance with and without plasma reactor was evaluated. • Plasma processing reduces gas calorific value but increases the yield. • Producer gas further can be utilized for drying of sewage sludge. - Abstract: This study presents an experimental investigation of downdraft gasification process coupled with a secondary thermal plasma reactor in order to perform experimental investigations of sewage sludge gasification, and compare process parameters running the system with and without the secondary thermal plasma reactor. The experimental investigation were performed with non-pelletized mixture of dried sewage sludge and wood pellets. To estimate the process performance, the composition of the producer gas, tars, particle matter, producer gas and char yield were measured at the exit of the gasification and plasma reactor. The research revealed the distribution of selected metals and chlorine in the process products and examined a possible formation of hexachlorobenzene. It determined that the plasma assisted processing of gaseous products changes the composition of the tars and the producer gas, mostly by destruction of hydrocarbon species, such as methane, acetylene, ethane or propane. Plasma processing of the producer gas reduces their calorific value but increases the gas yield and the total produced energy amount. The presented technology demonstrated capability both for applying to reduce the accumulation of the sewage sludge and production of substitute gas for drying of sewage sludge and electrical power.

54 ENVIRONMENTAL SCIENCES↗

ELECTRON CYCLOTRON MASER EMISSIONS FROM EVOLVING FAST ELECTRON BEAMS

Fast electron beams (FEBs) are common products of solar active phenomena. Solar radio bursts are an important diagnostic tool for understanding FEBs and the solar plasma environment in which they propagate along solar magnetic fields. In particular, the evolution of the energy spectrum and velocity distribution of FEBs due to the interaction with the ambient plasma and field during propagation can significantly influence the efficiency and properties of their emissions. In this paper, we discuss the possible evolution of the energy spectrum and velocity distribution of FEBs due to energy loss processes and the pitch-angle effect caused by magnetic field inhomogeneity, and we analyze the effects of the evolution on electron-cyclotron maser (ECM) emission, which is one of the most important mechanisms for producing solar radio bursts by FEBs. Our results show that the growth rates all decrease with the energy loss factor Q , but increase with the magnetic mirror ratio σ as well as with the steepness index δ . Moreover, the evolution of FEBs can also significantly influence the fastest growing mode and the fastest growing phase angle. This leads to the change of the polarization sense of the ECM emission. In particular, our results also reveal that an FEB that undergoes different evolution processes will generate different types of ECM emission. We believe the present results to be very helpful for a more comprehensive understanding of the dynamic spectra of solar radio bursts.

79 ASTRONOMY AND ASTROPHYSICS↗

Fibre optical measuring network based on quasi-distributed amplitude sensors for detecting deformation loads

A new design of a sensitive element for a fibre optical sensor of deformation loads is proposed. A distributed fibre optical measuring network, aimed at determining both the load application point and the load mass, has been developed based on these elements. It is shown that neural network methods of data processing make it possible to combine quasi-distributed amplitude sensors of different types into a unified network. The results of the experimental study of a breadboard of a fibre optical measuring network are reported, which demonstrate successful reconstruction of the trajectory of a moving object (load) with a spatial resolution of 8 cm, as well as the load mass in the range of 1 - 10 kg with a sensitivity of 0.043 kg{sup -1}. (laser optics 2012)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SEPARATION OF THE INTERSTELLAR BOUNDARY EXPLORER RIBBON FROM GLOBALLY DISTRIBUTED ENERGETIC NEUTRAL ATOM FLUX

The Interstellar Boundary Explorer (IBEX) observes a remarkable feature, the IBEX ribbon, which has energetic neutral atom (ENA) flux over a narrow region {approx}20{sup 0} wide, a factor of 2-3 higher than the more globally distributed ENA flux. Here, we separate ENA emissions in the ribbon from the distributed flux by applying a transparency mask over the ribbon and regions of high emissions, and then solve for the distributed flux using an interpolation scheme. Our analysis shows that the energy spectrum and spatial distribution of the ribbon are distinct from the surrounding globally distributed flux. The ribbon energy spectrum shows a knee between {approx}1 and 4 keV, and the angular distribution is approximately independent of energy. In contrast, the distributed flux does not show a clear knee and more closely conforms to a power law over much of the sky. Consistent with previous analyses, the slope of the power law steepens from the nose to tail, suggesting a weaker termination shock toward the tail as compared to the nose. The knee in the energy spectrum of the ribbon suggests that its source plasma population is generated via a distinct physical process. Both the slope in the energy distribution of the distributed flux and the knee in the energy distribution of the ribbon are ordered by latitude. The heliotail may be identified in maps of globally distributed flux as a broad region of low flux centered {approx}44{sup 0}W of the interstellar downwind direction, suggesting heliotail deflection by the interstellar magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

Gas expanded polymer process to anneal nanoparticle dispersion in thin films

A spin-coating solution comprising poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) nanoparticles used to create organic photovoltaic (OPV) active layers have been shown to adopt a non-uniform concentration profile across the thin film dimension. This inhomogeneous distribution can reduce the efficiency of the device. For our new process, gas expanded polymer (GXP) annealing, is applied to P3HT/PCBM thin film blends, enabling the distribution of the PCBM nanoparticles to be manipulated by varying the GXP processing conditions. Films of 50 nm thickness (nominally) created by spin casting a blend of P3HT mixed with PCBM were annealed by oscillatory GXP and GXP at constant pressure using high pressure CO 2 . An increase in P3HT crystallinity (detected by X-ray diffraction and UV-vis spectroscopy) along with a more uniform distribution of PCBM nanoparticles in the thickness dimension, as interpreted from neutron reflectivity measurements, were observed after oscillatory GXP annealing. In addition, static water contact angles suggest that the film/air interface is enriched in PCBM relative to the as-cast film. Finally, these results demonstrate that GXP annealing, which is commercially scalable, can be successfully used to create a uniform distribution of PCBM nanoparticles across the thickness dimension in a P3HT thin film.

36 MATERIALS SCIENCE↗

Novel high power impulse magnetron sputtering enhanced by an auxiliary electrical field

The high power impulse magnetron sputtering (HIPIMS) technique is a novel highly ionized physical vapor deposition method with a high application potential. However, the electron utilization efficiency during sputtering is rather low and the metal particle ionization rate needs to be considerably improved to allow for a large-scale industrial application. Therefore, we enhanced the HIPIMS technique by simultaneously applying an electric field (EF-HIPIMS). The effect of the electric field on the discharge process was studied using a current sensor and an optical emission spectrometer. Furthermore, the spatial distribution of the electric potential and electric field during the EF-HIPIMS process was simulated using the ANSYS software. The results indicate that a higher electron utilization efficiency and a higher particle ionization rate could be achieved. The auxiliary anode obviously changed the distribution of the electric potential and the electric field in the discharge region, which increased the plasma density and enhanced the degree of ionization of the vanadium and argon gas. Vanadium films were deposited to further compare both techniques, and the morphology of the prepared films was investigated by scanning electron microscopy. The films showed a smaller crystal grain size and a denser growth structure when the electric field was applied during the discharge process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

U redox state tracked in mineralized hydrothermal carbonate with implications for U-Pb geochronology

U-Pb carbonate geochronology can directly constrain the timing and rates of important geological processes. However, the mechanisms and controls on U incorporation, distribution, and retention in carbonate minerals remain unclear, limiting geological interpretations. Here X-ray absorption spectroscopy (µXAS) and in-situ U-Pb carbonate geochronology are combined to temporally track U distribution and redox state in a porphyry-epithermal system. In this setting, multiple generations of carbonate minerals record fluid conditions and processes which control the solubility and deposition of metals, including U. This novel approach provides the first evidence of both oxidized UO 2 2+ and reduced U 4+ species in temporally distinct generations of carbonate within a single sample. Preservation of two different U oxidation states during discrete precipitation events requires U retentivity within older domains, demonstrating that the U-Pb carbonate geochronometer is robust under hydrothermal conditions. Furthermore, crystal zones with abundant fluid/vapour inclusions linked to boiling processes coincide with relatively high levels of U and favourable U/Pb. Targeting carbonate domains with these textures may therefore increase success in U-Pb geochronology. U-Pb carbonate dating combined with µXAS can track the temporal evolution of processes critical for metal deposition in long-lived and multistage hydrothermal-magmatic ore deposit settings.

58 GEOSCIENCES↗

A parallel strategy for density functional theory computations on accelerated nodes

Using the Löwdin orthonormalization of tall-skinny matrices as a proxy-app for wavefunction-based Density Functional Theory solvers, we investigate a distributed memory parallel strategy focusing on Graphics Processing Unit (GPU)-accelerated nodes as available on some of the top ranked supercomputers at the present time. Here we present numerical results in the strong limit regime, as it is particularly relevant for First-Principles Molecular Dynamics. We also examine how matrix product-based iterative solvers provide a competitive alternative to dense eigensolvers on GPUs, allowing to push the strong scaling limit of these computations to a larger number of distributed tasks. Our strategy, which relies on replicated Gram matrices and efficient collective communications using the NCCL library, leads to a time-to-solution under 0.5 s for the Löwdin orthonormalization of a tall-skinny matrix of 3000 columns on Summit at Oak Ridge Leadership Facility (OLCF). Given the similarity in computational operations between one iteration of a DFT solver and this proxy-app, this shows the possibility of solving accurately the DFT equations well under a minute for 3000 electronic wave functions, and thus perform First-Principles molecular dynamics of physical systems much larger than traditionally solved on CPU systems.

97 MATHEMATICS AND COMPUTING↗

Electron Bulk Acceleration and Thermalization at Earth’s Quasiperpendicular Bow Shock [Electron Acceleration and Thermalization at Earth's Quasi-Perpendicular Bow Shock]

Electron heating at Earth’s quasiperpendicular bow shock has been surmised to be due to the combined effects of a quasistatic electric potential and scattering through wave-particle interaction. Here we report the observation of electron distribution functions indicating a new electron heating process occurring at the leading edge of the shock front. Incident solar wind electrons are accelerated parallel to the magnetic field toward downstream, reaching an electron-ion relative drift speed exceeding the electron thermal speed. The bulk acceleration is associated with an electric field pulse embedded in a whistler-mode wave. The high electron-ion relative drift is relaxed primarily through a nonlinear current-driven instability. Here, the relaxed distributions contain a beam traveling toward the shock as a remnant of the accelerated electrons. Similar distribution functions prevail throughout the shock transition layer, suggesting that the observed acceleration and thermalization is essential to the cross-shock electron heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗