Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Coastal Ohio Wind Project

The Coastal Ohio Wind Project intends to address problems that impede deployment of wind turbines in the coastal and offshore regions of Northern Ohio. The project evaluates different wind turbine designs and the potential impact of offshore turbines on migratory and resident birds by developing multidisciplinary research, which involves wildlife biology, electrical and mechanical engineering, and geospatial science. Firstly, the project conducts cost and performance studies of two- and three-blade wind turbines using a turbine design suited for the Great Lakes. The numerical studies comprised an analysis and evaluation of the annual energy production of two- and three-blade wind turbines to determine the levelized cost of energy. This task also involved wind tunnel studies of model wind turbines to quantify the wake flow field of upwind and downwind wind turbine-tower arrangements. The experimental work included a study of a scaled model of an offshore wind turbine platform in a water tunnel. The levelized cost of energy work consisted of the development and application of a cost model to predict the cost of energy produced by a wind turbine system placed offshore. The analysis found that a floating two-blade wind turbine presents the most cost effective alternative for the Great Lakes. The load effects studies showed that the two-blade wind turbine model experiences less torque under all IEC Standard design load cases considered. Other load effects did not show this trend and depending on the design load cases, the two-bladed wind turbine showed higher or lower load effects. The experimental studies of the wake were conducted using smoke flow visualization and hot wire anemometry. Flow visualization studies showed that in the downwind turbine configuration the wake flow was insensitive to the presence of the blade and was very similar to that of the tower alone. On the other hand, in the upwind turbine configuration, increasing the rotor blade angle of attack reduced the wake size and enhanced the vortices in the flow downstream of the turbine-tower compared with the tower alone case. Mean and rms velocity distributions from hot wire anemometer data confirmed that in a downwind configuration, the wake of the tower dominates the flow, thus the flow fields of a tower alone and tower-turbine combinations are nearly the same. For the upwind configuration, the mean velocity shows a narrowing of the wake compared with the tower alone case. The downwind configuration wake persisted longer than that of an upwind configuration; however, it was not possible to quantify this difference because of the size limitation of the wind tunnel downstream of the test section. The water tunnel studies demonstrated that the scale model studies could be used to adequately produce accurate motions to model the motions of a wind turbine platform subject to large waves. It was found that the important factors that affect the platform is whether the platform is submerged or surface piercing. In the former, the loads on the platform will be relatively reduced whereas in the latter case, the structure pierces the wave free surface and gains stiffness and stability. The other important element that affects the movement of the platform is depth of the sea in which the wind turbine will be installed. Furthermore, the wildlife biology component evaluated migratory patterns by different monitoring systems consisting of marine radar, thermal IR camera and acoustic recorders. The types of radar used in the project are weather surveillance radar and marine radar. The weather surveillance radar (1988 Doppler), also known as Next Generation Radar (NEXRAD), provides a network of weather stations in the US. Data generated from this network were used to understand general migratory patterns, migratory stopover habitats, and other patterns caused by the effects of weather conditions. At a local scale our marine radar was used to complement the datasets from NEXRAD and to collect additional monitoring parameters such as passage rates, flight paths, flight directions, and flight altitudes of nocturnal migrating species. Our work focused on the design and development of custom built marine radar that used t-bar and parabolic dish antennas. The marine radar used in the project was Furuno (XANK250) which was coupled with a XIR3000B digitizing card from Russell Technologies for collection of the radar data. The radar data was processed by open source radR processing software using different computational techniques and methods. Additional data from thermal IR imaging cameras were collected to detect heat emitted from objects and provide information on movements of birds and bats, data which we used for different animal flight behavior analysis. Lastly, the data from the acoustic recorders were used to provide the number of bird calls for assessing patterns and peak passage rates during migration. The development of the geospatial database included collection of different data sources that are used to support offshore wind turbine development. Many different data sets were collected and organized using initial version of web-based repository software tools that can accommodate distribution of rectified pertinent data sets such as the lake depth, lake bottom engineering parameters, extent of ice, navigation pathways, wind speed, important bird habitats, fish efforts and other layers that are relevant for supporting robust offshore wind turbine developments. Additional geospatial products developed during the project included few different prototypes for offshore wind farm suitability which can involve different stakeholders and participants for solving complex planning problems and building consensus. Some of the prototypes include spatial decision support system (SDSS) for collaborative decision making, a web-based Participatory Geographic Information System (PGIS) framework for evaluating importance of different decision alternatives using different evaluation criteria, and an Android application for collection of field data using mobile and tablet devices . In summary, the simulations of two- and three-blade wind turbines suggested that two-bladed machines could produce comparable annual energy as the three-blade wind turbines but have a lighter tower top weight, which leads to lower cost of energy. In addition, the two-blade rotor configuration potentially costs 20% less than a three blade configuration that produces the same power at the same site. The cost model analysis predicted a potential cost savings of approximately 15% for offshore two-blade wind turbines. The foundation design for a wind turbine in Lake Erie is likely to be driven by ice loads based on the currently available ice data and ice mechanics models. Hence, for Lake Eire, the cost savings will be somewhat smaller than the other lakes in the Great Lakes. Considering the size of cranes and vessels currently available in the Great Lakes, the cost optimal wind turbine size should be 3 MW, not larger. The surveillance data from different monitoring systems suggested that bird and bat passage rates per hour were comparable during heavy migrations in both spring and fall seasons while passage rates were significantly correlated to wind directions and wind speeds. The altitude of migration was higher during heavy migrations and higher over water relative to over land. Notable portions of migration on some spring nights occurred parallel the shoreline, often moving perpendicular to southern winds. The birds approaching the Western basin have a higher propensity to cross than birds approaching the Central basin of Lake Erie and as such offshore turbine development might be a better option further east towards Cleveland than in the Western basin. The high stopover density was more strongly associated with migration volume the following night rather than the preceding night. The processed mean scalar wind speeds with temporal resolutions as fine as 10-minute intervals near turbine height showed that August is the month with the weakest winds while December is the month, which typically has the strongest winds. The ice data suggests that shallow western basin of Lake Erie has higher ice cover duration many times exceeding 90 days during some winters.

17 WIND ENERGY↗

Limitations of reanalysis data for wind power applications

Wind energy resource estimates commonly depend on simulated wind speed profiles generated by reanalysis or weather models due to the lack of long time series measurements with sufficient coverage at relevant heights (roughly 90 m above ground). However, modeled data, including reanalyses, can be noisy and display a wide range of biases and errors, variously attributed to terrain effects, poor coverage of assimilated inputs, and model resolution. Wind generation records, if available at high temporal and geographical resolution, can provide a proxy for wind measurements and allow for evaluation of reanalyses and weather model wind time series. We use a 7-year-long data set of hourly, plant-level generation records from over 100 wind plants across Texas to evaluate two commonly used reanalysis data sets (MERRA2 and ERA5). Additionally, we use 1-year of records (2019) to evaluate an operational, high-resolution regional weather modeling product (HRRR v3). We find that across the region, and across all modeling products, the modeled representation of wind generation (i.e., wind speeds at hub heights passed through a power curve) has relatively small mean errors when aggregated daily, but that accuracy and hourly correlation have a strong diurnal sensitivity. Accuracy and correlation systematically decline through the evening and markedly improve after sunrise. These diurnal patterns persist even in the highest resolution model tested (HRRR v3). We hypothesize the nighttime decline in accuracy is mostly due to poorly represented boundary layer conditions, perhaps related to model representation of stability, while other uncertainties (such as wake effects) play a secondary role.

17 WIND ENERGY↗

Leveraging generative adversarial networks to create realistic scanning transmission electron microscopy images

Abstract The rise of automation and machine learning (ML) in electron microscopy has the potential to revolutionize materials research through autonomous data collection and processing. A significant challenge lies in developing ML models that rapidly generalize to large data sets under varying experimental conditions. We address this by employing a cycle generative adversarial network (CycleGAN) with a reciprocal space discriminator, which augments simulated data with realistic spatial frequency information. This allows the CycleGAN to generate images nearly indistinguishable from real data and provide labels for ML applications. We showcase our approach by training a fully convolutional network (FCN) to identify single atom defects in a 4.5 million atom data set, collected using automated acquisition in an aberration-corrected scanning transmission electron microscope (STEM). Our method produces adaptable FCNs that can adjust to dynamically changing experimental variables with minimal intervention, marking a crucial step towards fully autonomous harnessing of microscopy big data.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A MULTI-WAVELENGTH SPECTRAL AND POLARIMETRIC STUDY OF THE JET OF 3C 264

We present a comprehensive multi-band spectral and polarimetric study of the jet of 3C 264 (NGC 3862). Included in this study are three Hubble Space Telescope (HST) optical and ultraviolet polarimetry data sets, along with new and archival Very Large Array radio imaging and polarimetry, a re-analysis of numerous HST broadband data sets from the near infrared to the far ultraviolet, and a Chandra ACIS-S observation. We investigate similarities and differences between optical and radio polarimetry, in both degree of polarization and projected magnetic field direction. We also examine the broadband spectral energy distribution of both the nucleus and jet of 3C 264, from the radio through the X-rays. From this, we place constraints on the physics of the 3C 264 system, the jet and its dynamics. We find significant curvature of the spectrum from the near-IR to ultraviolet, and synchrotron breaks steeper than 0.5, a situation also encountered in the jet of M87. This likely indicates velocity and/or magnetic field gradients and more efficient particle acceleration localized in the faster/higher magnetic field parts of the flow. The magnetic field structure of the 3C 264 jet is remarkably smooth; however, we do find complex magnetic field structure that is correlated with changes in the optical spectrum. We find that the X-ray emission is due to the synchrotron process; we model the jet spectrum and discuss mechanisms for accelerating particles to the needed energies, together with implications for the orientation of the jet under a possible spine-sheath model.

79 ASTRONOMY AND ASTROPHYSICS↗

CHANDRA OBSERVATIONS AND CLASSIFICATION OF ACTIVE GALACTIC NUCLEUS CANDIDATES CORRELATED WITH AUGER UHECRs

We report on Chandra X-ray observations of possible active galactic nuclei (AGNs) which have been correlated with ultrahigh energy cosmic rays (UHECRs) observed by the Pierre Auger Collaboration. Combining our X-ray observations with optical observations, we conclude that one-third of the 21 Veron-Cetty Veron (VCV) galaxies correlating with UHECRs in the first Auger data release are actually not AGNs. We review existing optical observations of the 20 VCV galaxies correlating with UHECRs in the second Auger data release and determine that three of them are not AGNs and two are uncertain. Overall, of the 57 published UHECRs with |b| > 10 Degree-Sign , 22 or 23 correlate with true AGNs using the Auger correlation parameters. We also measured the X-ray luminosity of ESO139-G12 to complete the determination of the bolometric luminosities of AGNs correlating with UHECRs in the first data set. Apart from two candidate sources which require further observation, we determined bolometric luminosities for the candidate galaxies of the second data set. We find that only 2 of the total of 69 published UHECRs correlate with AGNs (IC5135 and IC4329a) which are powerful enough in their steady state to accelerate protons to the observed energies of their correlated UHECRs. The GZK expectation is that {approx}45% of the sources of UHECRs above 60 EeV should be contained within the z < 0.018 volume defined by the Auger scan analysis, so an observed level of 30%-50% correlation with weak AGNs is compatible with the suggestion that AGNs experience transient high-luminosity states during which they accelerate UHECRs.

79 ASTRONOMY AND ASTROPHYSICS↗

Union through UNITY: Cosmology with 2000 SNe Using a Unified Bayesian Framework

Type Ia supernovae (SNe Ia) were instrumental in establishing the acceleration of the Universe’s expansion. By virtue of their combination of distance reach, precision, and prevalence, they continue to provide key cosmological constraints, complementing other cosmological probes. Individual SN surveys cover only over about a factor of 2 in redshift, so compilations of multiple SN data sets are strongly beneficial. We assemble an up-to-date “Union” compilation of 2087 cosmologically useful SNe Ia from 24 data sets (“Union3”). We take care to put all SNe on the same distance scale and update the light-curve fitting with SALT3 to use the full rest-frame optical. Over the next few years, the number of cosmologically useful SNe Ia will increase by more than a factor of 10, and keeping systematic uncertainties subdominant will be more challenging than ever. We discuss the importance of treating outliers, selection effects, light-curve shape/color populations/standardization relations, unexplained dispersion, and heterogeneous observations simultaneously. We present an updated Bayesian framework, called UNITY1.5 (Unified Nonlinear Inference for Type-Ia cosmologY), that incorporates significant improvements in our ability to model selection effects, standardization, and systematic uncertainties compared to earlier analyses. As an analysis byproduct, we also recover the posterior of the SN-only peculiar-velocity field, although we do not interpret it in this work. We compute updated cosmological constraints with Union3 and UNITY1.5, finding weak 1.7σ–2.6σ tension with flat cold dark matter and possible evidence for thawing dark energy (w0 > − 1, wa < 0). We release our SN distances, light-curve fits, and UNITY1.5 framework to the community.

Rubin, David↗

Deep Spatiotemporal Feature Learning with Application to Image Classification

Deep machine learning is an emerging framework for dealing with complex high-dimensionality data in a hierarchical fashion which draws some inspiration from biological sources. Despite the notable progress made in the field, there remains a need for an architecture that can represent temporal information with the same ease that spatial information is discovered. In this work, we present new results using a recently introduced deep learning architecture called Deep Spatio-Temporal Inference Network (DeSTIN). DeSTIN is a discriminative deep learning architecture that combines concepts from unsupervised learning for dynamic pattern representation together with Bayesian inference. In DeSTIN the spatiotemporal dependencies that exist within the observations are modeled inherently in an unguided manner. Each node models the inputs by means of clustering and simple dynamics modeling while it constructs a belief state over the distribution of sequences using Bayesian inference. We demonstrate that information from the different layers of this hierarchical system can be extracted and utilized for the purpose of pattern classification. Earlier simulation results indicated that the framework is highly promising, consequently in this work we expand DeSTIN to a popular problem, the MNIST data set of handwritten digits. The system as a preprocessor to a neural network achieves a recognition accuracy of 97.98% on this data set. We further show related experimental results pertaining to automatic cluster adaptation and termination.

99 GENERAL AND MISCELLANEOUS↗

Framework for Evaluating Grid Readiness for Integrating Electric Vehicles and Utility Scale Storage in India

Electric vehicles (EVs) and distributed solar are poised to grow substantially in India in the coming years following ambitious Government of India targets. The localized impact of these changes, both in terms of infrastructure investments and demand patterns, are not well understood, nor are tools for this type of analysis readily available. This paper describes the development of a framework that can analyze network readiness in terms of feeder impacts for distributed energy resources (DERs) including growing EV penetration, and the potential solutions introduced by utility-scale battery energy storage systems (BESSs). The building blocks of the feeder analysis require multiple data sets to be compiled into a usable network model. The work is driven by feeder head and distribution transformer (DT) loading data along with all the technical specifications and schematics of distribution feeders. These measured data sets are conditioned to remove any afflictions, and the cleaned load profiles are used to perform multi-year quasi-static time-series power flow analyses on detailed three-phase feeder models. EVs translated to grid-tied loads are represented with aggregated EV demand profile estimates based on possible charging scenarios in residential sector, and in workplace and/or public charging stations. Finally, BESSs are evaluated for their cost-effectiveness in the framework through an initial screening that includes the benefits of grid service applications to mitigate present and future overloading scenarios. The outcomes from this framework are expected to help utilities gauge the readiness of their distribution grid for integrating an increasing number of EVs as well as load growth during a projected multi-year time horizon, where BESSs can contribute in making the grid more reliable.

electric vehicles↗

Computing single step operators of logic programming in radial basis function neural networks

Logic programming is the process that leads from an original formulation of a computing problem to executable programs. A normal logic program consists of a finite set of clauses. A valuation I of logic programming is a mapping from ground atoms to false or true. The single step operator of any logic programming is defined as a function (T{sub p}:I→I). Logic programming is well-suited to building the artificial intelligence systems. In this study, we established a new technique to compute the single step operators of logic programming in the radial basis function neural networks. To do that, we proposed a new technique to generate the training data sets of single step operators. The training data sets are used to build the neural networks. We used the recurrent radial basis function neural networks to get to the steady state (the fixed point of the operators). To improve the performance of the neural networks, we used the particle swarm optimization algorithm to train the networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

EXPLORATIONS BEYOND THE SNOW LINE: SPITZER/IRS SPECTRA OF DEBRIS DISKS AROUND SOLAR-TYPE STARS

We have observed 152 nearby solar-type stars with the Infrared Spectrometer (IRS) on the Spitzer Space Telescope. Including stars that met our criteria but were observed in other surveys, we get an overall success rate for finding excesses in the long-wavelength IRS band (30-34 mum) of 11.8% +- 2.4%. The success rate for excesses in the short-wavelength band (8.5-12 mum) is approx1% including sources from other surveys. For stars with no excess at 8.5-12 mum, the IRS data set 3sigma limits of around 1000 times the level of zodiacal emission present in our solar system, while at 30-34 mum data set limits of around 100 times the level of our solar system. Two stars (HD 40136 and HD 10647) show weak evidence for spectral features; the excess emission in the other systems is featureless. If the emitting material consists of large (10 mum) grains as implied by the lack of spectral features, we find that these grains are typically located at or beyond the snow line, approx1-35 AU from the host stars, with an average distance of 14 +- 6 AU; however, smaller grains could be located at significantly greater distances from the host stars. These distances correspond to dust temperatures in the range approx50-450 K. Several of the disks are well modeled by a single dust temperature, possibly indicative of a ring-like structure. However, a single dust temperature does not match the data for other disks in the sample, implying a distribution of temperatures within these disks. For most stars with excesses, we detect an excess at both IRS and Multiband Imaging Photometer for Spitzer (MIPS) wavelengths. Only three stars in this sample show a MIPS 70 mum excess with no IRS excess, implying that very cold dust is rare around solar-type stars.

79 ASTRONOMY AND ASTROPHYSICS↗

MOSAiC Radar b1 Processing: Corrections, Calibrations, and Processing Report

The U.S. Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) user facility deployed many instruments on board a German ice breaker, the Research Vessel (RV) Polarstern, for one year from October 2019 to October 2020. The purpose of the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC) field campaign was to study the decline in the sea-ice pack around the North Pole, and what factors may be at play. After the campaign ended, efforts were undertaken to provide a calibrated radar data set for future studies. MOSAiC presented new challenges to this process, as existing methodologies often were not applicable for the frozen environment with little to no ground clutter, and concurrent engineering updates or calibrations could not be accomplished once the ship set off. Like the previous Cloud, Aerosol, and Complex Terrain Interactions (CACTI) and Cold-air Outbreaks in the Marine Boundary Layer Experiment (COMBLE) documentation (Hardin et al. 2020, Matthews et al. 2023), the data correction and calibration process is known in ARM as creating a “b1” datastream. This means that the radar datastreams have been well characterized to the best possible quality. This report will detail the status of the raw “a1” level data sets during the MOSAiC campaign, the corrections that were applied to create the “b1” data files, and the details of the applied methods.

54 ENVIRONMENTAL SCIENCES↗

Similarity Metric for Data Optimization and Efficient Training of Reactive Machine Learning Force Fields for Hydrocarbon Radiolysis

Radiolysis is a common approach to sterilize polymers, chemically modify them for upcycling, and accelerate their decomposition for recycling purposes. Reactive molecular dynamics (MD) simulations provide a powerful tool to generate atomic-level trajectories of the reactive processes and quantify radiolytic chemical degradation pathways. For this, machine learning (ML) surrogate models for reactive force fields with quantum mechanical accuracy are now widely used, which require ML training data sets that can provide information on atomic environments for target chemical systems. However, radiolysis chemistry can be highly complex and diverse, which poses significant challenges for generating training data to parametrize ML models. In this regard, we developed a method for optimizing the training data set using a cosine similarity metric to help guide training set selection for radiolysis of polyethylene, a model hydrocarbon polymer, as well as to enhance the transferability of our reactive ML force field (MLFF) to a variety of molecular and polymeric systems. Our approach performs atom-by-atom comparisons between local atomic environments to pinpoint important data points associated with rare and localized events, such as radiolysis damage within structures. We apply this approach to train the Chebyshev Interaction Model for Efficient Simulation (ChIMES) MLFF model, which expresses the atomic interaction potentials in terms of linear combinations of many-body Chebyshev polynomials. We first show that our method can reduce our training set size by ∼70% while improving overall accuracy compared to more standard MD model fitting approaches. We then validate our optimum model against diverse hydrocarbon simulation data, including simple alkanes and systems with unsaturated carbon bonds, over a wide range of thermodynamic conditions. Finally, we use our ChIMES model to perform MD simulations of radiolytic damage with large-scale systems that help avoid system size effects. Overall, our approach yields an MD force field that retains most of the accuracy of the underlying quantum method while yielding many orders of improvement in computational efficiency. In conclusion, our efforts will have impact on future hydrocarbon polymer radiolysis studies, where the chemical details of the polymer–radiation interactions can have a strong effect on the resulting products observed in experiments.

Hydrocarbons↗

MULTI-COLOR OPTICAL AND NEAR-INFRARED LIGHT CURVES OF 64 STRIPPED-ENVELOPE CORE-COLLAPSE SUPERNOVAE

We present a densely sampled, homogeneous set of light curves of 64 low-redshift (z ≲ 0.05) stripped-envelope supernovae (SNe of Type IIb, Ib, Ic, and Ic-BL). These data were obtained between 2001 and 2009 at the Fred L. Whipple Observatory (FLWO) on Mount Hopkins in Arizona, with the optical FLWO 1.2 m and the near-infrared (NIR) Peters Automated Infrared 1.3 m telescopes. Our data set consists of 4543 optical photometric measurements on 61 SNe, including a combination of U BV RI, U BV r{sup ′}i{sup ′}, and u{sup ′} BV r{sup ′}i{sup ′}, and 1919 JHK{sub s} NIR measurements on 25 SNe. This sample constitutes the most extensive multi-color data set of stripped-envelope SNe to date. Our photometry is based on template-subtracted images to eliminate any potential host-galaxy light contamination. This work presents these photometric data, compares them with data in the literature, and estimates basic statistical quantities: date of maximum, color, and photometric properties. We identify promising color trends that may permit the identification of stripped-envelope SN subtypes from their photometry alone. Many of these SNe were observed spectroscopically by the Harvard-Smithsonian Center for Astrophysics (CfA) SN group, and the spectra are presented in a companion paper. A thorough exploration that combines the CfA photometry and spectroscopy of stripped-envelope core-collapse SNe will be presented in a follow-up paper.

79 ASTRONOMY AND ASTROPHYSICS↗

Requirements for Cataloging Hanford Geophysical Datasets

Environmental management activities at the Hanford Site produce extensive data about site conditions, contaminants, cleanup, and more. Managing and archiving that data requires a high degree of collaboration among site contractors and a high level of awareness by project managers and staff. Part of that effort is developing a Hanford Environmental Information and Data Index (HEIDI) to organize the data and maximize its value by making it findable and available for reuse. The objective is to catalog the disparate data sets collected to address the evolving needs of planning, executing, and documenting cleanup over several decades up to the present day, including links to active data sources when available. A properly implemented data catalog makes finding environmental datasets related to an area or theme a routine, reliable process, without requiring the searcher to have special knowledge that a data set exists and where it may be stored. In this project, a working group, including the U.S. Department of Energy, the Hanford Site contractors, and Pacific Northwest National Laboratory staff, identified needs and requirements for handling complex site data. Geophysical data was chosen as a test case because it can be large and complex and often involves multiple processing steps to extract the information incorporated into deliverables. The ability to document those steps was one of the requirements identified for the catalog. In addition to developing requirements, other activities included selecting a metadata schema and initial testing with the objective of determining whether the workflow and capabilities of selected data catalog software platforms were sufficient to implement and impose the identified requirements. This initial testing involved running the default catalog instance using the software platform of interest and altering the configuration to achieve each requirement, if possible. Where configuration alone was insufficient, the possibility of modifying the software by changing the code was examined, but not implemented. A follow-on task is planned to reprogram the code as necessary to implement requirements in a prototype catalog.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Exploring Telematics Big Data for Truck Platooning Opportunities

NREL completed a temporal and geospatial analysis of telematics data to estimate the fraction of platoonable miles traveled by class 8 tractor trailers currently in operation. This paper discusses the value and limitations of very large but low time-resolution data sets, and the fuel consumption reduction opportunities from large scale adoption of platooning technology for class 8 highway vehicles in the US based on telematics data. The telematics data set consist of about 57,000 unique vehicles traveling over 210 million miles combined during a two-week period. 75% of the total fuel consumption result from vehicles operating in top gear, suggesting heavy highway utilization. The data is at a one-hour resolution, resulting in a significant fraction of data be uncategorizable, yet significant value can still be extracted from the remaining data. Multiple analysis methods to estimate platoonable miles are discussed. Results indicate that 63% of total miles driven at known hourly-average speeds happens at speeds amenable to platooning. When also considering availability of nearby partner vehicles, results indicate 55.7% of all classifiable miles driven were platoonable. Analysis also address the availability of numerous partners enabling platoons greater than 2 trucks and the percentage of trucks that would be required to be equipped with platooning equipment to realize more than 50% of the possible savings.

33 ADVANCED PROPULSION SYSTEMS↗

Python and HPC for High Energy Physics Data Analyses

High level abstractions in Python that can utilize computing hardware well seem to be an attractive option for writing data reduction and analysis tasks. In this paper, we explore the features available in Python which are useful and efficient for end user analysis in High Energy Physics (HEP). A typical vertical slice of an HEP data analysis is somewhat fragmented: the state of the reduction/analysis process must be saved at certain stages to allow for selective reprocessing of only parts of a generally time-consuming workflow. Also, algorithms tend to to be modular because of the heterogeneous nature of most detectors and the need to analyze different parts of the detector separately before combining the information. This fragmentation causes difficulties for interactive data analysis, and as data sets increase in size and complexity (O10 TiB for a “small” neutrino experiment to the O10 PiB currently held by the CMS experiment at the LHC), data analysis methods traditional to the field must evolve to make optimum use of emerging HPC technologies and platforms. Mainstream big data tools, while suggesting a direction in terms of what can be done if an entire data set can be available across a system and analysed with high-level programming abstractions, are not designed with either scientific computing generally, or modern HPC platform features in particular, such as data caching levels, in mind. Our example HPC use case is a search for a new elementary particle which might explain the phenomenon known as “Dark Matter”. Here, using data from the CMS detector, we will use HDF5 as our input data format, and MPI with Python to implement our use case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of Error-Bounded Lossy Compression for Hard-to-Compress HPC Data

Since today’s scientific applications are producing vast amounts of data, compressing them before storage/transmission is critical. Results of existing compressors show two types of HPC data sets: highly compressible and hard to compress. In this work, we carefully design and optimize the error-bounded lossy compression for hard-tocompress scientific data. We propose an optimized algorithm that can adaptively partition the HPC data into best-fit consecutive segments each having mutually close data values, such that the compression condition can be optimized. Another significant contribution is the optimization of shifting offset such that the XOR-leading-zero length between two consecutive unpredictable data points can be maximized. We finally devise an adaptive method to select the best-fit compressor at runtime for maximizing the compression factor. We evaluate our solution using 13 benchmarks based on real-world scientific problems, and we compare it with 9 other state-of-the-art compressors. Experiments show that our compressor can always guarantee the compression errors within the user-specified error bounds. Most importantly, our optimization can improve the compression factor effectively, by up to 49% for hard-tocompress data sets with similar compression/decompression time cost.

97 MATHEMATICS AND COMPUTING↗

SOLAR CYCLE 24: CURIOUS CHANGES IN THE RELATIVE NUMBERS OF SUNSPOT GROUP TYPES

Here, we analyze different sunspot group (SG) behaviors from the points of view of both the sunspot counts (SSCs) and the number of SGs, in four categories, for the time period of 1982 January-2014 May. These categories include data from simple (A and B), medium (C), large (D, E, and F), and decaying (H) SGs. We investigate temporal variations of all data sets used in this study and find the following results. (1) There is a very significant decrease in the large groups' SSCs and the number of SGs in solar cycle 24 (cycle 24) compared to cycles 21-23. (2) There is no strong variation in the decaying groups' data sets for the entire investigated time interval. (3) Medium group data show a gradual decrease for the last three cycles. (4) A significant decrease occurred in the small groups during solar cycle 23, while no strong changes show in the current cycle (cycle 24) compared to the previous ones. We confirm that the temporal behavior of all categories is quite different from cycle to cycle and it is especially flagrant in solar cycle 24. Thus, we argue that the reduced absolute number of the large SGs is largely, if not solely, responsible for the weak cycle 24. These results might be important for long-term space weather predictions to understand the rate of formation of different groups of sunspots during a solar cycle and the possible consequences for the long-term geomagnetic activity.

79 ASTRONOMY AND ASTROPHYSICS↗