Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data consistent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Propagating tides in the mesosphere

A preliminary search has begun for evidence of tides in the 1-hr average line-of-sight mesospheric velocity data from the Urbana radar in the period 1978 to 1982, inclusive. Observations are restricted to the southeasterly component of those velocities. Since observations are only available for a fraction of a day due to the absence of night-time ionization in the Urbana mesosphere, it was decided to adopt an unusual procedure in the search; namely, to perform a Fourier analysis in the vertical direction and look for rotation in phase of vectors representing spatial frequency components. Propagating tidal modes would then show as vectors with a net rotation corresponding to their downward phase velocity. Five year monthly averages of hourly mean horizontal velocities inferred from the Urbana data are given. Consistent diurnal variation is seen for a number of months. These data were analyzed for vertical spatial periods of 3, 4.5, 6, 9, 12, and 24 km. When plotted as a function of time of day, many of the phasors tended to show a net rotation. The sense of rotation of a spinning vector in the complex plane can be determined objectively by computing the signed area swept out by the vector in saving from point to point. This calculation, indicated downward motion in 8 out of 12 months for the 9-km component and in 11 out of 12 months for the 24-km component. A comparison of the magnitudes of the 6 modes showed that the primary component was the 24-km component, a result confirmed by the tidal models of Forbes.

Bowhill, S. A.↗
NASA NTRS1987

Biharmonic spline interpolation of GEOS-3 and Seasat altimeter data

An algorithm is presented for determining the minimum curvature surface passing through a set of nonuniformly spaced data points. The curve is generated as a linear combination of Green functions for the biharmonic operator at each data point, with the amplitudes of the functions adjusted so that the interpolating surfaces passes through each point. The function passing through the points can be regarded as a spline to which point forces are applied, defining the minimum curvature between the points. The technique was used to combine the along track slopes of the GEOS-3 and Seasat altimeter data into a consistent geoid height map of the Caribbean area, covering 0.5 million data points in the process. Sample images are provided and new topographic features that are revealed are discussed.

Sandwell, David T.↗
NASA NTRS1989

An overview of MAP/GLOBUS NO(x)

GLOBUS NO(x) is a combined observation of nitrogen compounds by more than 20 experiments, from satellites, remote and in situ instruments on board balloons and ground observatories, within a short time period. Held in September 1985 above Southern France, the field campaign has been a technical success. Most of the observations were achieved as anticipated. NO, NO2 and relevant species and physical parameters involved in their photochemistry, were measured between 5 and 40 km at several periods of the day. A first step of data interpretation which consists of instrumental intercomparisons, is now achieved. Several systematic biases between data of various origins which have appeared in the past, are now understood and reduced. A second step which deals with atmospheric photochemistry issues like diurnal cycles and budget, is now on its way. It will be the object of a close exchange between experimenters involved in the campaign and modelers.

Pommereau, J. P.↗
NASA NTRS1993

Operational and research aspects of a radio-controlled model flight test program

The operational and research aspects of a subscale, radio-controlled model flight test program are presented. By using low-cost free-flying models, an approach was developed for obtaining research-quality vehicle performance and aerodynamic information. The advantages and limitations learned by applying this approach to a specific flight test program are described. The research quality of the data acquired shows that model flight testing is practical for obtaining consistent repeatable flight data.

Budd, Gerald D.↗
NASA NTRS2014

Comparison of H+ and He+ Plasmapause Locations Based on Resurrected and Reevaluated OGO-5 Ion Composition Data Base

Orbiting Geophysical Observatory 5 (OGO 5) magnetospheric ion-composition data (H+, He+ and O+) from an ion spectrometer (Sharp, 1969) have been retrieved from old magnetic tapes archived at the National Space Science Data Center (NSSDC). The highly compressed binary format was converted into a user-friendly ASCII format and these data have been made available online. We have inspected reliability and consistency of this data set in state of the art current knowledge. Comparing with the climatological model IRI-2012 and the mathematical model FLIP a shift of absolute and relative ion densities with time was revealed. We have suggested a correction procedure of individual H+, He+ and O+ ion densities. Using the corrected data set, we investigated plasmapause locations based on density gradient in H+, and He+. Correlation coefficient of both locations was determined as approx. 0.886 and the typical difference (Delta)L approx. 0.1. The electron density at the He+ plasmapause location for all cases is >100/cu cm.

Plasmasphere↗
NASA NTRS2022

Microgravity Electrical Capacitance Tomography Data Set

Propellants mass gauging technologies designed to work in an accelerated environment, where the propellant remains settled at one end of the propellant tank, do not work well in a microgravity environment because the propellant is not necessarily settled. While some microgravity mass gauging technologies exist at various TRLs, most of them have major disadvantages. Improvements in microgravity propellant mass gauging will result in improvements to many areas of propellant management, which influences performance and mission assurance. Electrical Capacitance Tomography (ECT) is a sensing technology that has been used in the oil/gas industry for decades to measure multi-phase flow rate in pipes. ECT, when installed in a tank, is able to reconstruct the liquid distribution inside of the tank, which can then be integrated to obtain mass. ECT mass gauging recently achieved high accuracy in laboratory testing on the ground, and while ECT mass gauging will theoretically work during all phases of flight, it had not yet been tested in microgravity. The NASA KSC Launch Services Program, with support from the Flight Opportunities Program, successfully flew an ECT tank liquid mass gauging system experiment on a Zero-G parabolic flight aircraft. The experiment hardware was rented from a company; NASA LSP did no technology development work for this project. This STRIVES entry is for the entire raw data set, which consists of approximately 25GB of csv files of capacitance and motion data from the ground and flight tests of the experiment. The data set will be available on the NASA LSP Electronic Slosh Data Catalog (ESDC), and the public may request the data set from the authors (POC: Jed Storey, jedediah.m.nasa.gov).

mass gauging↗
NASA NTRS1977

Serial-data correlator/code translator

System, consisting of sampling flip flop, memory (either RAM or ROM), and memory buffer, correlates sampled data with predetermined acceptance code patterns, translates acceptable code patterns to nonreturn-to-zero code, and identifies data dropouts.

Morgan, L. E.↗
DOE OSTI2020

Fast Approximate Methods for Modified Gravity Cosmological Simulations

The accelerated expansion of the Universe poses a major theoretical puzzle. Although the assumption of a non-zero cosmological constant provides a minimal extension of general relativity that is consistent with observational data, many theories of modified gravity have been suggested as possible alternatives. Predictions of structure formation for these models in the fully nonlinear regime are very expensive and it is difficult, if not impossible, to explore such a huge space of models and parameters using high-resolution N-body simulations. Even in the mildly nonlinear regime, perturbative methods can become extremely complex. We explore whether simplified dynamical approximations, applicable for a certain set of cosmological probes, can be used to investigate models of modified gravity with acceptable accuracy in the latter instance. For the case of chameleon gravity, we find that these methods can indeed be used to explore the region around the baryon acoustic oscillation scale, k ~ 0:1 hMpc-1 but not much further.

cosmology↗
NASA NTRS1984

Atmospheric environment for Space Shuttle (STS-51A) launch

Selected atmospheric conditions observed near Space Shuttle STS-51A launch time on November 8, 1984, are summarized. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere measured vertical wind profiles is reported. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-51A vehicle ascent was constructed. The STS-51A ascent atmospheric data tape is constructed to provide an internally consistent data set for use in postflight performance assessments.

Johnson, D. L.↗
NASA NTRS1985

Atmospheric environment for space shuttle (STS-51C) launch

Selected atmospheric conditions observed near space shuttle STS-51C launch time on January 24, 1985, at Kennedy Space Center, Florida are summarized. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere measured vertical wind profiles are presented. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-51C vehicle ascent was constructed. The STS-51C ascent atmospheric data tape was constructed to provide an internally consistent data set for use in postflight performance assessments.

Jasper, G.↗
DOE OSTI2023

Towards a New nCTEQ global nPDF release

We discuss the foundation for a new global nCTEQ nuclear PDF analysis, combining a number of our previous analyses into one consistent framework with updates to the underlying theoretical treatment as well as the addition of new available data. In particular, the new global release will be the first nCTEQ release containing neutrino DIS scattering data in a consistent manner together with JLab high-x DIS data and new LHC p-Pb data. These additions will improve the data-driven description of nuclear PDFs in new regions, especially the strange quark and the gluon PDF at low-x.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2017

New Data-Driven Estimation of Terrestrial CO2 Fluxes in Asia Using a Standardized Database of Eddy Covariance Measurements, Remote Sensing Data, and Support Vector Regression

The lack of a standardized database of eddy covariance observations has been an obstacle for data-driven estimation of terrestrial carbon dioxide fluxes in Asia. In this study, we developed such a standardized database using 54 sites from various databases by applying consistent postprocessing for data-driven estimation of gross primary productivity (GPP) and net ecosystem carbon dioxide exchange (NEE). Data-driven estimation was conducted by using a machine learning algorithm: support vector regression (SVR), with remote sensing data for 2000 to 2015 period. Site-level evaluation of the estimated carbon dioxide fluxes shows that although performance varies in different vegetation and climate classifications, GPP and NEE at 8 days are reproduced (e.g., r (exp 2) =0.73 and 0.42 for 8 day GPP and NEE). Evaluation of spatially estimated GPP with Global Ozone Monitoring Experiment 2 sensor-based Sun-induced chlorophyll fluorescence shows that monthly GPP variations at subcontinental scale were reproduced by SVR (r (exp 2)=1.00, 0.94, 0.91, and 0.89 for Siberia, East Asia, South Asia, and Southeast Asia, respectively). Evaluation of spatially estimated NEE with net atmosphere-land carbon dioxide fluxes of Greenhouse Gases Observing Satellite (GOSAT) Level 4A product shows that monthly variations of these data were consistent in Siberia and East Asia; meanwhile, inconsistency was found in South Asia and Southeast Asia. Furthermore, differences in the land carbon dioxide fluxes from SVR-NEE and GOSAT Level 4A were partially explained by accounting for the differences in the definition of land carbon dioxide fluxes. These data-driven estimates can provide a new opportunity to assess carbon dioxide fluxes in Asia and evaluate and constrain terrestrial ecosystem models.

chlorophyll fluorescence↗
DOE OSTI2024

Modeling Plutonium Decorporation in a Female Nuclear Worker Treated with Ca-DTPA after Inhalation Intake

The present work models plutonium (Pu) biokinetics in a female former nuclear worker. Her bioassay measurements are available at the US Transuranium and Uranium Registries. The worker was internally exposed to a plutonium-americium mixture via acute inhalation at a nuclear weapons facility. She was medically treated with injections of 1 g Ca-DTPA on days 0, 5, and 14 after the intake. Between days 0 and 20, fecal and urine samples were collected and analyzed for 239 Pu and 241 Am. Subsequently, she was followed up for bioassay monitoring over 14 y, with additional post-treatment urine samples collected and analyzed for 239 Pu. The uniqueness of this dataset is due to the availability of: (1) both early and long-term bioassay data from a female with plutonium intake; (2) data on chelation therapy for a female; and (3) fecal measurement results. Chelation therapy with Ca- and/or Zn-salts of DTPA is known to aid in reducing the internal radiation dose by enhancing the excretion of plutonium and americium from the body. Such enhancement affects plutonium biokinetics in the human body, posing a challenge to the internal dose assessment. The current radiation dose assessment practice is to exclude the data affected by Ca-DTPA from the analysis. The present analysis is the first to explicitly model the chelation-affected bioassay data in a female by using a newly developed chelation model. Thus, the bioassay data collected during and after the Ca-DTPA administrations were used for biokinetic modeling and dose assessment. The Markov Chain Monte Carlo method was used to investigate model parameter uncertainty, based on the bioassay data and assumed prior probability distributions. A χ 2 /nData (number of data points) ≈ 1 was observed in this study, which indicates self-consistency of the data with the model. Results of this study show that the worker’s 239 Pu intake was 12 Bq, with a committed effective dose to the whole-body of 1.2 mSv and a committed equivalent dose to the bone surfaces, liver, and lungs of 37.8, 9.1, and 0.8 mSv, respectively. This study also discusses the worker’s dose reduction due to chelation treatment.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

Magnetic Gears for a Marine Hydrokinetic Generator Component Model

The goal of this project is to design, fabricate, and test a hermetically sealed 50 kilowatt (kW) multistage magnetically geared generator (MGG). The Component Content Model provides data submitters with an easy and consistent means of uploading data and associated meta data about a component that is currently under development. The data fields include generic information about the component, technology classifications, current costs and performance, proposed target goals, and the environment that the component is operated in. These data are important to DOE and will be used to develop data products that provide quantitative information to guide and support programmatic decisions. Data will also be used by DOE in general assessments of MHK component readiness, performance, costs, and proposed plans. The ultimate goal is to use these data to perform research and tailor programs to best benefit the industry.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Levelized Cost of Electricity (LCOE) Content Model for Design of High Deflection Foils for MHK Applications

The LCOE Content Model provides data submitters with an easy and consistent means of uploading data that can be used to calculate the levelized cost of energy for MHK devices. These data are important to DOE and will be used to develop data products that provide quantitative information to guide and support programmatic decisions. Data will also be used to evaluate MHK products and determine costs and can help data users compare the combination of capital costs and operations and maintenance over time. The ultimate goal is to use these data to perform research and tailor programs to best benefit the industry.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Optimizing Classifiers for Radionuclide Identification

Identifying threat nuclear materials is a critical for the prevention of acts of nuclear terrorism on the homeland. For this purpose, many radionuclide identification devices are deployed in the field. However, these will not necessarily be in the hands of non-experts, therefore these devices need to provide ready-made answers for the personnel in the field. This is where advanced algorithms are employed to both interpret the data and provide the identification of the nuclear material being interrogated. We took a machine learning approach to identification, by using training and validation data sets to create and optimize classifiers which determine which radionuclide is consistent with the data. The classifiers investigated were the Random Forest, Decision Tree, Support Vector Machine, and XG Boost and their performance was judged using the F1 Score for both hyperparameter tuning and comparison. In the end, we found out that the Random Forest Classifier worked the best based off the F1 Score they got which was 0.98.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Spatio-Temporal Surrogates for Interaction of a Jet with High Explosives: Part II - Clustering Extremely High-Dimensional Grid-Based Data

Building an accurate surrogate model for the spatio-temporal outputs of a computer simulation is a challenging task. A simple approach to improve the accuracy of the surrogate is to cluster the outputs based on similarity and build a separate surrogate model for each cluster. This clustering is relatively straightforward when the output at each time step is of moderate size. However, when the spatial domain is represented by a large number of grid points, numbering in the millions, the clustering of the data becomes more challenging. In this report, we consider output data from simulations of a jet interacting with high explosives. These data are available on spatial domains of different sizes, at grid points that vary in their spatial coordinates, and in a format that distributes the output across multiple files at each time step of the simulation. We first describe how we bring these data into a consistent format prior to clustering. Borrowing the idea of random projections from data mining, we reduce the dimension of our data by a factor of thousand, making it possible to use the iterative k-means method for clustering. We show how we can use the randomness of both the random projections, and the choice of initial centroids in k-means clustering, to determine the number of clusters in our data set. Our approach makes clustering of extremely high dimensional data tractable, generating meaningful cluster assignments for our problem, despite the approximation introduced in the random projections.

97 MATHEMATICS AND COMPUTING↗