Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conducting structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

High Efficiency, Inexpensive Thin Film III-V Photovoltaics using Single-Crystalline-Like, Flexible Substrates

An innovative, non-mainstream approach has been developed to fabricate inexpensive GaAs solar cells directly on epi-ready flexible metal substrates. Using templates made by ion beam assisted deposition (IBAD) and epitaxial germanium films made by Plasma Enhanced Chemical Vapor Deposition (PECVD), epitaxial GaAs films with high opto-electronic and structural quality have been grown on metal substrates using metal organic chemical vapor deposition (MOCVD). Crystallographic out-of-plane and in-plane texture spread less than 1 degree full-width-at-half-maximum (FWHM) was achieved in undoped, n-type and p-type GaAs films as well as in AlGaAs films on metal substrates. Electron mobility of >1300 cm 2 /V-s was attained in GaAs:Si n-type films. Also, hole mobility of >100 cm 2 /V-s was measured in GaAs:Zn films. Consistent doping was obtained in GaAs:Si (10 15 -10 18 cm -3 ), and GaAs:Zn films (10 17 -10 19 cm -3 ), necessary for the active device layers of a GaAs solar cell. Defect reduction techniques (thermal cycling, superlattice structures) were implemented to reduce defect density in GaAs films from 1 × 10 9 cm -2 to 9 × 10 7 cm -2 . Lifetime of 2.3 ns was obtained in AlGaAs/GaAs double-heterostructure device. Solar cells were fabricated based on designs using 1-dimensional and 2-dimensional simulations tailored to the specific properties of the GaAs films on metal substrates. All device fabrication processes (lithography, anti-reflection coating (ARC), device isolation and mesa formation and ohmic metal electrode formation) suitable for III-V solar cell fabrication on metal substrates were fully developed. A bi-layered ARC using ZnS and MgF 2 was used to minimize the reflection over wide range of spectrum. When this ARC was applied after removal of the parasitic absorption layer, the conversion efficiencies were improved up to 11.1% with V oc = ~0.621 V, J sc = ~24.5 mA/cm 2 , and FF = ~0.735. Yet another accomplishment in this project was the development of all electrically-conducting architecture for GaAs solar cells on metal substrates. Biaxial-texture was successfully achieved in all electrically-conducting buffer layer on metal substrate in structure based on IBAD TiN instead of IBAD MgO. The all electrically-conducting Ge/NiSi 2 /TiN/IBAD-TiN/Hastelloy substrate was used to fabricate back contacts for vertically conducting solar cell structures on metal substrates. A metallic resistivity as low as 4.17 μΩ•cm was obtained. A significant improvement of the texture of the Ge template was achieved using a Ag buffer layer between the TiN films. Epitaxial GaAs was successfully grown on the all-electrically-conducting buffer architecture. A Liquid Phase Epitaxy (LPE) method to drastically increase grain size of epitaxial Ge while maintaining the single-crystalline-like texture. Grain size up to 35 µm was achieved in LPE Ge grown on sputtered Ge with a grain size of ~ 1 µm on IBAD template on metal substrate. Epitaxial GaAs was grown on LPE Ge, with an out-of-plane texture of 0.34° compared to 0.98° in GaAs grown on sputter deposited Ge. A model was developed to simulate the effect of grain boundaries as a function of grain size of GaAs films on metal substrates. This model showed that even the very low angle grain boundaries (<1º misorientation) of our GaAs films led to decrease in Voc. Hydrogen plasma passivation treatment is being developed to improve open circuit voltage and the conversion efficiency of GaAs solar cells on flexible substrate.

14 SOLAR ENERGY↗

A self-forming composite electrolyte for solid-state sodium battery with ultra-long cycle life

Replacing organic liquid electrolyte with inorganic solid electrolytes (SE) can potentially address the inherent safety problems in conventional rechargeable batteries. Furthermore, all-solid-state batteries have been plagues by the relatively low ionic conductivity of solid electrolytes and large charge-transfer resistance resulted from solid-solid interfaces between electrode materials and solid electrolytes. Here we report a new design strategy for improving the ionic conductivity of solid electrolyte by self-forming a composite material. An optimized Na + ion conducting composite electrolyte derived from the NASICON structure was successfully synthesized, yielding ultra-high ionic conductivity of 3.4 mS cm –1 at 25°C and 14 ms cm –1 at 80°C.

25 ENERGY STORAGE↗

N-Doped Graphene (N-G)/MOF(ZIF-8)-Based/Derived Materials for Electrochemical Energy Applications: Synthesis, Characteristics, and Functionality

In recent years, graphene-type materials originating from metal–organic frameworks (MOFs) or integrated with MOFs have exhibited notable performances across various applications. However, a comprehensive understanding of these complex materials and their functionalities remains obscure. While some studies have reviewed graphene/MOF composites from different perspectives, due to their structural–functional intricacies, it is crucial to conduct more in-depth reviews focusing on specific sets of graphene/MOF composites designed for particular applications. In this review, we thoroughly investigate the syntheses, characteristics, and performances of N-G/MOF(ZIF-8)-based/derived materials employed in electrochemical energy conversion and storage systems. Special attention is given to realizing their fundamental functionalities. The discussions are divided into three segments based on the application of N-G/ZIF-8-based/derived materials as electrode materials for batteries, electrodes for electrochemical capacitors, and electrocatalysts. As electrodes for batteries, N-G/MOF(ZIF-8) materials can mitigate issues like an electrode volume expansion for Li-ion batteries and the ‘shuttle effect’ for Li-S batteries. As electrodes for electrochemical capacitors, these materials can considerably improve the ion transfer rate and electronic conductivity, thereby enhancing the specific capacitance while maintaining the structural stability. Also, it was observed that these materials could occasionally outperform standard platinum-based catalysts for the electrochemical oxygen reduction reaction (ORR). The reported electrochemical performances and structural parameters of these materials were carefully tabulated in uniform units and scales. Through a critical analysis of the present synthesis trends, characteristics, and functionalities of these materials, specific aspects were identified that required further exploration to fully utilize their inherent capabilities.

Electrochemistry↗

An analytical comparison of two wing structures for Mach 5 cruise airplanes

Mach 5 cruise research conducted by NASA is related to aerodynamics, propulsion, and structures. The study of structures includes the propulsion system, fuselage, and wings. Various studies have shown that the achievement of adequate range is largely dependent on a low structural mass fraction. The present investigation is concerned with a study of two wing structure configurations for Mach 5 aircraft. An uprated version (Ti-6242 replacing B-120 titanium) of the YF-12/SR-71 wing structure is considered. The B-120 titanium structure represents the current art of high speed aircraft wing structures. The YF-12 wing structure was designed about 20 years ago when the analytical methods for calculating thermal stresses were limited. The second wing structural configuration studied in the present investigation also used Ti-6242 materials but replaced the corrugated-beaded panels with diffusion bonded honeycomb-core sandwich panels, and replaced the z-stiffened shear webs with sine-wave stiffened shear webs.

Taylor, A. H.↗

Design considerations of PSR moderate focus-mission structure

A supporting space-frame has been designed for the segmented panels, secondary reflector, control system, and interface hardware of a near-term Precision Segmented Reflector (PSR) telescope. In addition to meeting areal mass density, vibration frequency, thermal expansion, positioning accuracy, and interface attachment design goals, the PSR structure must withstand Atlas launch loads. Analyses have been conducted of the optical pointing-related structural performance of the Moderate Focus Mission Structure (MFMS), with a view to both mechanical and thermal disturbance analyses; the results indicate that the dynamic responses of the MFMS optical mirrors, due to the chopping disturbance of the secondary reflector about its center-of-mass, are within maintenance sensor requirements.

Shih, Choon-Foo↗

Inhibition of Oxidation in Nuclear Graphite

Graphite is a fundamental material of high temperature gas cooled nuclear reactors, providing both structure and neutron moderation. Its high thermal conductivity, chemical inertness, thermal heat capacity, and high thermal structural stability under normal and off normal conditions contribute to the inherent safety of these reactor designs. One of the primary safety issues for a high temperature graphite reactor core is the possibility of rapid oxidation of the carbon structure during an off normal design basis event where an oxidizing atmosphere (air ingress) can be introduced to the hot core. Although the current Generation IV high temperature reactor designs attempt to mitigate any damage caused by a postualed air ingress event, the use of graphite components that inhibit oxidation is a logical step to increase the safety of these reactors. Recent experimental studies of graphite containing between 5.5 and 7 wt% boron carbide (B4C) indicate that oxidation is dramatically reduced even at prolonged exposures at temperatures up to 900°C. The proposed addition of B4C to graphite components in the nuclear core would necessarily be enriched in B-11 isotope in order to minimize B-10 neutron absorption and graphite swelling. The enriched boron can be added to the graphite during billet fabrication. Experimental oxidation rate results and potential applications for borated graphite in nuclear reactor components will be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Origins of anisotropic transport in the electrically switchable antiferromagnet Fe 1/3 NbS 2

Recent experiments on the antiferromagnetic intercalated transition metal dichalcogenide Fe 1/3 NbS 2 have demonstrated reversible resistivity switching by application of orthogonal current pulses below its magnetic ordering temperature, making Fe 1/3 NbS 2 promising for spintronics applications. Here, we perform density functional theory calculations with Hubbard U corrections of the magnetic order, electronic structure, and transport properties of crystalline Fe 1/3 NbS 2 , clarifying the origin of the different resistance states. The two experimentally proposed antiferromagnetic ground states, corresponding to in-plane stripe and zigzag ordering, are computed to be nearly degenerate. In-plane cross sections of the calculated Fermi surfaces are anisotropic for both magnetic orderings, with the degree of anisotropy sensitive to the Hubbard U value. The in-plane resistance, computed within the Kubo linear response formalism using a constant relaxation time approximation, is also anisotropic, supporting a hypothesis that the current-induced resistance changes are due to a repopulating of antiferromagnetic domains. Our calculations indicate that the transport anisotropy of Fe 1/3 NbS 2 in the zigzag phase is reduced relative to stripe, consistent with the relative magnitudes of resistivity changes in experiment. Finally, our calculations reveal the likely directionality of the current-domain response, specifically, which domains are energetically stabilized for a given current direction.

36 MATERIALS SCIENCE↗

(Mn,Co)(3)O-4 Spinel Coatings on Ferritic Stainless Steels for SOFC Interconnect Applications

(Mn,Co)3O4 spinel with a nominal composition of Mn1.5Co1.5O4 demonstrates excellent electrical conductivity, satisfactory thermal and structural stability, as well as good thermal expansion match to ferritic stainless steel interconnects. A slurry-coating technique was developed for fabricating the spinel coatings onto the steel interconnects. Thermally grown layers of Mn1.5Co1.5O4 not only significantly decreased the contact resistance between a LSF cathode and stainless steel interconnect, but also acted as a mass barrier to inhibit scale growth on the stainless steel and to prevent Cr outward migration through the coating. The level of improvement in electrical performance and oxidation resistance (i.e. the scale growth rate) was dependent on the ferritic substrate composition. For E-brite and Crofer22 APU, with a relatively high Cr concentration (27wt% and 23%, respectively) and negligible Si, the reduction of contact ASR and scale growth on the ferritic substrates was significant. In comparison, limited improvement was achieved by application of the Mn1.5Co1.5O4 spinel coating on AISI430, which contains only 17% Cr and a higher amount of residual Si.

30 DIRECT ENERGY CONVERSION↗

Modulation of the Electronic and Vibrational Landscape in Lead Organic Chalcogenides

Metal organic chalcogenides (MOCs) are an emerging class of two-dimensional (2D) materials featuring tunable band gaps and strong light-matter interactions with great potential for optical and polaritonic applications. Lead organic chalcogenides (LOCs) stand out among MOCs for sustaining long-lived coherent optical phonons despite their distorted lattices. However, the strong electron–phonon coupling also leads to rapid charge carrier self-trapping, hindering carrier transport. Herein, we demonstrate that charge carrier self-trapping is suppressed in Se- and Te-based LOCs. Specifically, the expansive Se and Te orbitals give rise to more dispersive conduction bands and reduced electron effective masses, thereby mitigating carrier self-trapping. As a result of reduced carrier self-trapping, the Se- and Te-based LOCs exhibit enhanced band-to-band photoluminescence and improved charge transport performance. Furthermore, our results provide a synthetic route to Se- and Te-based LOC single crystals and demonstrate the potential of orbital engineering to tune their electronic and phononic properties.

Chalcogenides↗

Advanced structures technology applied to a supersonic cruise arrow-wing configuration

The application of advanced technology to a promising aerodynamic configuration was explored to investigate the improved payload range characteristics over the configuration postulated during the National SST Program. The results of an analytical study performed to determine the best structural approach for design of a Mach number 2.7 arrow-wing supersonic cruise aircraft are highlighted. The data conducted under the auspices of the Structures Directorate of the National Aeronautics and Space Administration, Langley Research Center, established firm technical bases from which further trend studies were conducted to quantitatively assess the benefits and feasibility of using advanced structures technology to arrive at a viable advanced supersonic cruise aircraft.

Sakata, I. F.↗

Psilocybin: crystal structure solutions enable phase analysis of prior art and recently patented examples

Psilocybin {systematic name: 3-[2-(dimethylamino)ethyl]-1 H -indol-4-yl dihydrogen phosphate} is a zwitterionic tryptamine natural product found in numerous species of fungi known for their psychoactive properties. Following its structural elucidation and chemical synthesis in 1959, purified synthetic psilocybin has been evaluated in clinical trials and has shown promise in the treatment of various mental health disorders. In a recent process-scale crystallization investigation, three crystalline forms of psilocybin were repeatedly observed: Hydrate A, Polymorph A, and Polymorph B. The crystal structure for Hydrate A was solved previously by single-crystal X-ray diffraction. This article presents new crystal structure solutions for the two anhydrates, Polymorphs A and B, based on Rietveld refinement using laboratory and synchrotron X-ray diffraction data, and density functional theory (DFT) calculations. Utilizing the three solved structures, an investigation was conducted via Rietveld method (RM) based quantitative phase analysis (QPA) to estimate the contribution of the three different forms in powder X-ray diffraction (PXRD) patterns provided by different sources of bulk psilocybin produced between 1963 and 2021. Over the last 57 years, each of these samples quantitatively reflect one or more of the hydrate and anhydrate polymorphs. In addition to quantitatively evaluating the composition of each sample, this article evaluates correlations between the crystal forms present, corresponding process methods, sample age, and storage conditions. Furthermore, revision is recommended on characterizations in recently granted patents that include descriptions of crystalline psilocybin inappropriately reported as a single-phase `isostructural variant.' Rietveld refinement demonstrated that the claimed material was composed of approximately 81% Polymorph A and 19% Polymorph B, both of which have been identified in historical samples. In this article, we show conclusively that all published data can be explained in terms of three well-defined forms of psilocybin and that no additional forms are needed to explain the diffraction patterns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The XXL Survey I. Scientific Motivations - Xmm-Newton Observing Plan - Follow-up Observations and Simulation Programme

The quest for the cosmological parameters that describe our universe continues to motivate the scientific community to undertake very large survey initiatives across the electromagnetic spectrum. Over the past two decades, the Chandra and XMM-Newton observatories have supported numerous studies of X-ray-selected clusters of galaxies, active galactic nuclei (AGNs), and the X-ray background. The present paper is the first in a series reporting results of the XXL-XMM survey; it comes at a time when the Planck mission results are being finalized. Aims. We present the XXL Survey, the largest XMM programme totaling some 6.9 Ms to date and involving an international consortium of roughly 100 members. The XXL Survey covers two extragalactic areas of 25 deg2 each at a point-source sensitivity of approx. 5 x 10(exp 15) erg/s/sq cm in the [0.5-2] keV band (completeness limit). The surveys main goals are to provide constraints on the dark energy equation of state from the space-time-distribution of clusters of galaxies and to serve as a pathfinder for future, wide-area X-ray missions. We review science objectives, including cluster studies, AGN evolution, and large-scale structure, that are being conducted with the support of approximately 30 follow-up programs. Methods. We describe the 542 XMM observations along with the associated multi- and numerical simulation programmes. We give a detailed account of the X-ray processing steps and describe innovative tools being developed for the cosmological analysis. Results. The paper provides a thorough evaluation of the X-ray data, including quality controls, photon statistics, exposure and background maps, and sky coverage. Source catalogue construction and multi-associations are briefly described. This material will be the basis for the calculation of the cluster and AGN selection functions, critical elements of the cosmological and science analyses. Conclusions. The XXL multi- data set will have a unique lasting legacy value for cosmological and extragalactic studies and will serve asa calibration resource for future dark energy studies with clusters and other X-ray selected sources. With the present article, we release the XMM XXL photon and smoothed images along with the corresponding exposure maps.

X-rays: general – large-scale structure of Unive↗

Integrated transient thermal-structural finite element analysis

An integrated thermal-structural finite element approach for efficient coupling of transient thermal and structural analysis is presented. New integrated thermal-structural rod and one dimensional axisymmetric elements considering conduction and convection are developed and used in transient thermal-structural applications. The improved accuracy of the integrated approach is illustrated by comparisons with exact transient heat conduction-elasticity solutions and conventional finite element thermal-finite element structural analyses. Results indicate that the approach offers significant potential for further development with other elements.

Thornton, E. A.↗

Engineering Scale Simulation of Nonequilibrium Network Phases for Battery Electrolytes

According to the article, Diblock copolymers play an important role in the fabrication of battery materials and fuel cells. For these applications, one block provides mechanical stability, whereas the other is conducting. The application characteristics of the material critically depend on the morphology of the multicomponent material, and three-dimensional, percolating domains of the conducting domains are preferred. In this work, we investigate the nonequilibrium morphology of diblock copolymers after a quench from the disordered phase. After the spinodal self-assembly, we observe three-dimensionally percolating network structures for volume fractions, f ≥ 8/32, of the conducting component even if the equilibrium phases exhibit different percolation properties. We quantify the conductivity and tortuosity of these structures via a simple random-walk model and observe that the conductivity of the nonequilibrium structures is significantly smaller than that of the equilibrium phases. We also find large but finite-sized, fractal-like structures inside the morphology, which influence the transport properties. To explore the morphology on different scales and mitigate finite-size effects, we employ very large simulations with billions of particles. Our work demonstrates that for the prediction of bulk transport properties in these nonequilibrium morphologies it is necessary to study such large system sizes.

Polymer Science↗

Machine learnt bond order potential to model metal–organic (Co–C) heterostructures

A fundamental understanding of the inter-relationships between structure, morphology, atomic scale dynamics, chemistry, and physical properties of mixed metallic-covalent systems is essential to design novel functional materials for applications in flexible nano-electronics, energy storage and catalysis. To achieve such knowledge, it is imperative to develop robust and computationally efficient atomistic models that describe atomic interactions accurately within a single framework. Here, we present a unified Tersoff–Brenner type bond order potential (BOP) for a Co–C system, trained against lattice parameters, cohesive energies, equation of state, and elastic constants of different crystalline phases of cobalt as well as orthorhombic Co2C derived from density functional theory (DFT) calculations. The independent BOP parameters are determined using a combination of supervised machine learning (genetic algorithms) and local minimization via the simplex method. Our newly developed BOP accurately describes the structural, thermodynamic, mechanical, and surface properties of both the elemental components as well as the carbide phases, in excellent accordance with DFT calculations and experiments. Using our machine-learnt BOP potential, we performed large-scale molecular dynamics simulations to investigate the effect of metal/carbon concentration on the structure and mechanical properties of porous architectures obtained via self-assembly of cobalt nanoparticles and fullerene molecules. Such porous structures have implications in flexible electronics, where materials with high electrical conductivity and low elastic stiffness are desired. Using unsupervised machine learning (clustering), we identify the pore structure, pore-distribution, and metallic conduction pathways in self-assembled structures at different C/Co ratios. We find that as the C/Co ratio increases, the connectivity between the Co nanoparticles becomes limited, likely resulting in low electrical conductivity; on the other hand, such C-rich hybrid structures are highly flexible (i.e., low stiffness). The BOP model developed in this work is a valuable tool to investigate atomic scale processes, structure–property relationships, and temperature/pressure response of Co–C systems, as well as design organic–inorganic hybrid structures with a desired set of properties.

Narayanan, Badri↗