Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conditional expectations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Iodine Distribution During Evaporation of Hanford Waste Treatment Plant Direct Feed Low Activity Waste Effluent Management Facility Simulant

The Hanford Waste Treatment and Immobilization Plant (WTP) Low Activity Waste (LAW) vitrification facility will generate an aqueous condensate recycle stream from the off-gas system. The baseline plan for disposition of this stream during full WTP operations is to send it to the WTP Pretreatment Facility, where it will be blended with LAW, concentrated by evaporation, and recycled to the LAW vitrification facility. However, during the Direct Feed LAW (DFLAW) scenario, planned disposition of this stream involves concentrating the condensate in a new evaporator at the Effluent Management Facility (EMF) and returning it to the LAW melter. The LAW melter condensate stream will contain components, e.g. halides and sulfates, that are volatile at melter temperatures, have limited solubility in glass waste forms, and present a material corrosion concern. Further, some minor constituents in the melter condensate, such as volatile organic compounds and iodine, have been found to be at least partially volatile in the EMF. The condensate from the EMF will be sent to the Hanford Effluent Treatment Facility (ETF). The presence of some recalcitrant organics and iodine, as 129I, are expected to be problematic in the ETF. In order to better predict and prepare for the distribution of organics and 129I in the flowsheet, it is key to understand their chemistry and experimentally determine their behavior during evaporation. To do this, modeling and testing were performed to examine the speciation of iodine under relevant conditions, as well as determine partitioning of iodine and the organics in the EMF evaporator. This overall program examines the potential treatment and immobilization of the LAW melter condensate stream to enable alternative disposal. The objective of this task was to (1) perform modeling to determine the speciation and fate of iodine species, (2) prepare a simulant of the LAW Melter Off-gas Condensate expected during DFLAW operations, (3) spike in the key volatile organics and non-radioactive iodine, and (4) demonstrate evaporation in order to predict the final composition of the effluents from the EMF evaporator to aid in planning for their disposition. The results of the modeling of iodine speciation indicate that the iodine is expected to remain in the evaporator pot as iodide and possibly iodate ion if the pH is raised to 11.5-12, which is the planned condition for the EMF. Experimental testing confirmed that the iodide remained in the evaporator concentrate and was below detection limits in all condensate and knock-out pot samples, indicating it was not volatile. The organic nitrile compounds that were added to the simulant were absent from the evaporator feed solution, either lost through evaporation, or more likely, decomposition. The acetone and methylene chloride were below the target values in the feed and condensate samples, and were presumably lost to evaporation or decomposition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Comparative Dissolution Kinetics of Biogenic and Chemogenic Uraninite Under Oxidizing Conditions in the Presence of Carbonate

The long-term stability of biogenic uraninite with respect to oxidation is pivotal to the success of in situ bioreduction strategies for the subsurface remediation of uranium legacies. Given the structural homology between biogenic uraninite nanoparticles obtained from Shewanella oneidensis MR-1 and chemogenic UO2.00, similar surface free energy and reactivity is expected. Batch and flow-through dissolution experiments were conducted along with spectroscopic analyses to compare both materials with respect to their equilibrium solubility, dissolution mechanisms, and dissolution kinetics in water of varied oxygen and carbonate concentrations. Both uraninite materials exhibited a similar intrinsic solubility of ~10-8 M under reducing conditions. The observation of comparable dissolution rates under anoxic as well as oxidizing conditions is consistent with the structural bulk homology of biogenic and stoichiometric uraninite. Carbonate, a ubiquitous groundwater component and strong complexant of U(VI), reversibly promoted the uraninite dissolution not only under moderately oxidizing, but also under reducing conditions, where the biogenic material yielded higher dissolution rates than the chemogenic. This difference is in accordance with the higher proportion of U(V) detected on the biogenic uraninite surface by means of x-ray photoelectron spectroscopy. Reasonable sources of the intermediate U(V) are discussed. The observed increase of the dissolution rates can be explained by carbonate complexation of U(V) facilitating the detachment of U(V) from the uraninite surface. The fraction of surface U(VI) increased with increasing oxygen concentration; this result is consistent with x-ray absorption near-edge spectra showing evidence of higher-valent U in the form of UO2+x (0 < x ≤ 0.20). In equilibrium with air, combined spectroscopic results support the formation of a near-surface layer of U4O9 (UO2.25) coated by an outer layer of U(VI) corresponding to a metaschoepite-like phase. This result is in accordance with flow-through dissolution experiments indicating control of the dissolution rate of surface-oxidized uraninite by the solubility of metaschoepite under the tested conditions. Although U(V) has been observed in electrochemical studies on the dissolution of nuclear fuel, this is the first investigation that demonstrates the formation of a stable U(V) intermediate phase on the surface of submicron-sized uraninite particles suspended in aqueous solutions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Laboratory and Lysimeter Experimentation and Transport Modeling of Neptunium and Strontium in Savannah River Site Sediments

The Savannah River Site (SRS) conducts performance assessment (PA) calculations to determine the appropriate amount of low-level radiological waste that can be safely disposed on site. Parameters are included in these calculations that account for the interaction between the immobile solid phase and the mobile aqueous phase. These parameters are either the distribution coefficient (K$_{d}$ value) or the apparent solubility value (K$_{sp}$). These parameters are readily found in the literature and are used throughout the DOE complex. One shortcoming of K$_{d}$ values is that they are only applicable to a given set of solid and aqueous phase conditions. Therefore, a given radionuclide may have several K$_{d}$ values as it moves between formations and comes into contact with different solids and different aqueous phases. It is expected that the K$_{d}$ construct will be appropriate to use for a majority of the PA and for a majority of the radionuclides. However, semi-mechanistic models would be more representative in isolated cases where the chemistry is especially transitory or the radionuclide chemistry is especially complex, bringing to bear multiple species of varying sorption tendencies to the sediment. Semi-mechanistic models explicitly accommodate the dependency of K$_{d}$ values, or other sorption parameters, on contaminant concentration, competing ion concentrations, pH-dependent surface charge on the adsorbent, and solute species distribution. Incorporating semi-mechanistic concepts into geochemical models is desirable to make the models more robust and technically defensible. Furthermore, these alternative models could be used to augment or validate a K$_{d}$-based DOE Order 435.1 Performance Assessment. The objectives of this study were to: 1) develop a quantitative thermodynamically-based model for neptunium sorption to SRS sediments, and 2) determine a sorption constant from an SRS 11-year lysimeter study. The modeling studies were conducted with existing data sets. The first data set used laboratory generated Np sorption data as a function of concentration (three orders of magnitude) and as a function of pH (four orders of magnitude of proton concentration). In this modeling exercise, a very simple solution was identified by assuming that all sorption occurred only to the iron oxides in the sediment and that all the added NpO$_{4}$$^{-}$ remained in the oxidized state and was not reduced to the Np(IV) state (as occurs rapidly with Pu(V)). With rather limited input data, very good agreement between experimental and modeling results was observed. This modeling approach would be easy to add to the PA with little additional data requirements. This model would be useful in a system where pH is expected to change greatly, such as directly beneath a grout or concrete structure. The second model discussed in the report was to derive strontium K$_{d}$ values from data collected in an 11-year-old field transport study. In this controlled lysimeter study, a sensitivity analysis was conducted of hydrological and chemical processes that influence contaminant transport, including diffusion coefficients, seepage velocity, and K$_{d}$ value. The best overall K$_{d}$ derived from the model fit to the data was 32 L kg$^{-1}$, which was the same value that was previously measured in traditional laboratory batch sorption studies. This was an unexpected result given the differences in experimental conditions between the batch test and the lysimeter flow through test, in particular the differences between strontium adsorption and desorption processes occurring in the latter test and not in the former. There were some trends in the lysimeter strontium data that were not predicted by the K$_{d}$ model, which suggest that other geochemical processes are likely also controlling strontium transport. Strontium release and cation exchange are being evaluated. These results suggest that future modeling efforts (e.g., PAs) could be improved by employing a more robust semi-empirical modeling approach to transient or complex conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Advanced Ultrasupercritical (AUSC) Materials Thick-Walled Cycling Header Development for ComTest-AUSC (Final Report)

Alstom Power Inc., a wholly owned subsidiary of the General Electric Company (GE) recently completed “Advanced Ultrasupercritical (AUSC) Materials Thick-Walled Cycling Header Development for ComTest-AUSC” under Award No. DE-FE0026183 for the U.S. Department of Energy National Energy Technology Laboratory (DOE NETL). This project developed a design for testing of a high temperature nickel-based superalloy thick-walled header to simulate cycling and flexible plant operation in new and existing plants. The objective was to simulate the expected thermal stresses of a new AUSC plant or a retrofit header in an existing plant to improve flexible dynamic operation while maintaining component integrity and overall power plant reliability. The high performance superalloy materials that enable higher operating temperatures and pressures can support future transformational power technologies including new AUSC plants at 4250-5000 psi, 730°C/760°C or will serve as a replacement component in a repowered or retrofit USC coal powered cycling plant at 3600 psi, 600°C. These alloys can also enable supercritical CO2 cycles, nuclear power, solar power and more efficient natural gas combined cycle units as targeted by the U.S. DOE/NETL Cross-Cutting Research Technology Program Plan. Recently developed advanced nickel alloys such as Inconel 740H (740H) and Haynes 282 (H282) have been successfully tested on a pilot scale for fireside corrosion using steam loop tubing at AUSC temperatures of 760°C in actual operating coal fired boiler. These high strength materials have been demonstrated their adequacy for use in other high temperature boiler components such as superheater tubes. Thick-walled superheater outlet headers which operate at high temperatures and pressure under severe cycling condition are considered as one of the most critical component in the AUSC coal fired boiler. Over the design life of a plant, these headers are exposed to the most severe fatigue and creep damage accumulation and need to be properly designed for the expected cycling in an AUSC plant with flexible operation. These materials need to demonstrate adequate design life of 20 to 30 years for creep and fatigue conditions. The following tasks were performed: 1. A conceptual design was developed of a thick-walled component representative of typical headers with several tube connections and proper flow rates (~100,000 lbs/hr) suitable for Phase II test at 760°C operation. This was based on a process analysis of expected full scale new and component retrofit designs for AUSC; 2. A multi-physics flow and heat transfer computational fluid dynamics (CFD) analysis of the component for proper layout of the header configuration, number and geometry (size) of tubes required for bypass flow, flow rates through the tubing, and sectional pressure drops was performed. Steam to header metal heat transfer film coefficients in the header section and the tubes during the two stages (half load and full load) of the cycling operation were evaluated and used in the stress analysis; 3. Detailed analytical evaluation of the thick-walled pipe and tube connections for mechanical integrity under cycling conditions was performed. This included transient thermal stress analysis and fatigue usage estimation including the tube-to-pipe weld geometries and weld materials; 4. A layout and design of the thick-walled test component was developed and instrumentation required for a test was identified; 5. Continuum Damage Mechanics (CDM) creep prediction models were extended to 740H and H282 and validated with public data on 740H and H282 for use in creep analysis. In addition, detailed creep analyses were performed separately for the design life of the conceptual AUSC superheater outlet header using these General Electric (GE) creep constitutive models. GE was the prime contractor for the project, which was directed by Principal Investigator Robert Schrecengost and Lead Scientist Dr. B. Reddy Ganta. Other collaborative participants in this project included GE Global Research, GE Boiler Engineering, and a Technical Consultant from EPRI.

01 COAL, LIGNITE, AND PEAT↗

Sensitivity of cellular automata grain structure predictions for high solidification rates

Understanding as-solidified grain structure development during constrained (G 0) alloy solidification conditions is a necessary component of understanding the larger process-microstructure relationships during additive manufacturing (AM) processing. This study applies a cellular automata (CA) model, for static solidification velocities and thermal gradients on the order of those expected in AM melt pools, to investigate grain shape development across ranges of input parameters governing temperature field evolution, nucleation, and growth. Variation in nucleated grain shape from columnar to equiaxed as a function of thermal gradient and nucleation density is modeled with CA and verified against the established transition model of Hunt and Gaumann. Furthermore, while thermal conditions and nucleation density are shown to have the largest roles on microstructure development, the sensitivity of grain structure was very unevenly distributed across parameter space. In particular, it was found that microstructure is very sensitive to mean nucleation undercooling and the interfacial response function in process space regimes near grain structure transitions, but entirely controlled by a combination of thermal gradient, solidification velocity, and nucleation density away from such transitions. The understanding of grain shape sensitivity obtained through CA modeling, particularly at large thermal gradient and nucleation density, will be necessary for accurate microstructure prediction during the extreme processing conditions and large input parameter uncertainty common to AM.

36 MATERIALS SCIENCE↗

Comparative Analysis of the Near‐ and Far‐Field Optical Response of Thin Plasmonic Nanostructures

Abstract Nanostructures made of metallic materials support collective oscillations of their conduction electrons, commonly known as surface plasmons. These modes, whose characteristics are determined by the material and morphology of the nanostructure, couple strongly to light and confine it into subwavelength volumes. Of particular interest are metallic nanostructures for which the size along one dimension approaches the nanometer or even the subnanometer scale, since such morphologies can lead to stronger light–matter interactions and higher degrees of confinement than regular three‐dimensional nanostructures. Here, the plasmonic response of metallic nanodisks of varying thicknesses and aspect ratios is investigated under far‐ and near‐field excitation conditions. It is found that, for far‐field excitation, the strength of the plasmonic response of the nanodisk increases with its thickness, as expected from the increase in the number of conduction electrons in the system. However, for near‐field excitation, the plasmonic response becomes stronger as the thickness of the nanodisk is reduced. This behavior is attributed to the higher efficiency with which a near‐field source couples to the plasmons supported by thinner nanodisks. The results of this work advance the understanding of the plasmonic response of thin metallic nanostructures, thus increasing their potential for the development of novel applications.

36 MATERIALS SCIENCE↗

Experimental Investigation of Elastodynamic Nonlinear Response of Dry Intact, Fractured and Saturated Rock

Nonlinear elastodynamic response of fractured rocks carries crucial information on fracture features that can be exploited to forecast flow properties, friction constitutive behavior and poromechanical response. Well-controlled laboratory experiments are designed to measure the nonlinear elastodynamic response of Westerly granite in three states: dry intact, dry fractured and saturated fractured. We study the effect of fracturing and saturation in modifying the elastodynamic response of the rock. Each sample is tested at a normal stress level of 15 MPa. We measure the elastodynamic response of an intact L-shaped sample of Westerly Granite subjected to normal stress oscillations of prescribed amplitudes (0.2–1 MPa) and frequencies (0.1, 1, 10 Hz). Ultrasonic waves transmitted across the sample are used to monitor the evolution of wave velocity before, during and after dynamic stressing. Furthermore, the nonlinearity of the elastodynamic response is measured in terms of: (1) the offset in normalized wave velocity; (2) the amplitude of wave velocity fluctuation during the oscillations; and (3) recovery rate of the wave velocity post-oscillation. We observe that the three nonlinearity parameters show a similar trend. Irrespective of the parameter, the nonlinearity measures higher for sample in dry-intact condition than that for dry-fractured and the saturated-fractured sample exhibits smaller nonlinearity than the dry-fractured sample. As expected, the saturated sample exhibits less nonlinearity than the dry intact and fractured samples due to the presence of interstitial fluid and the resulting increased interface stiffness. Conversely, the dry intact rock shows a higher nonlinearity than the dry fractured. We use numerical simulations to show that the presence of fracture significantly alters the strain distribution across the bulk of the sample and only the contacting asperities are highly strained, thus resulting in a decrease in the measured elastodynamic nonlinearity.

58 GEOSCIENCES↗

Gaining Perspective on Unconventional Well Design Choices through Play-level Application of Machine Learning Modeling

The recent development of unconventional oil and gas (O&G) reservoirs has led to an abundant hydrocarbon supply, both domestically and globally. However, there is a continued push to develop new and innovative approaches to improve exploration and extraction efficiencies and overall well productivity moving forward. Substantial improvements in unconventional O&G development are expected through optimized well completion and stimulation strategies aimed at maximizing well productivity. Optimizing well designs will require tailoring to the distinctive geologic conditions present for any newly placed well. To better evaluate the impact of well design attributes and their associated interactions on productivity in a major unconventional play, multivariate machine learning-based models that use empirical datasets were developed. A gradient boosted regression tree (GBRT) algorithm was applied. GBRT has been narrowly investigated for O&G applications but enables straightforward parametric importance and influence evaluation, as well as assessment of parameter interaction effects. Models were trained on well design and locational parameters that serve as a proxy for variable geologic conditions to estimate two types of productivity indicator response variables strongly correlated to estimated ultimate recovery (EUR). The dataset utilized consists of over 7,000 well observations that cover the majority of the productive region of the Marcellus Shale. Model performance was evaluated and algorithm parameters tuned by analyzing the goodness-of-fit for simulated results against observed data in a cross-validation approach. Models were found capable of 73–79 percent prediction accuracy on held out testing data of gas equivalent production and can be used to inform future well design and placement decisions for increasing EUR per well and improving overall field-level recovery. Study results indicate that Marcellus well performance improves most with upscaling perforated interval lengths and water and proppant volumes per foot; but relative productivity improvements are spatially dependent across the play. Finally, optimal combinations of water and proppant on well performance were found to vary depending on well location, emphasizing the utility of data-driven models capable of broad application across a play of interest for informing tailored well design approaches prior to their field deployment.

04 OIL SHALES AND TAR SANDS↗

Morphological and Structural Changes during the Reduction and Reoxidation of CuO/CeO2 and Ce1-xCuxO2 Nanocatalysts: In Situ Studies with Environmental TEM XRD and XAS

We have studied the structural, morphological, and electronic properties of CuO/CeO{sub 2} and Ce{sub 1-x}Cu{sub x}O{sub 2} nanocatalysts during reduction/oxidation cycles using H2 and O2 as chemical probes. Time-resolved in situ characterization was performed by X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) as well as aberration-corrected environmental transmission electron microscopy (ETEM). We have found that both types of nanocatalysts reduce to a Cu/CeO{sub 2} biphase system with significant oxygen vacancies in CeO{sub 2}. Important variations are seen in the Cu particle size and metal dispersion depending on the initial state of the copper oxide-ceria systems. During subsequent in situ oxygen annealing, the Cu precipitated from the CuO/CeO{sub 2} system reoxidized to form CuO through a Cu2O intermediate phase as expected. However, the Cu precipitated from the Ce{sub 0.8}Cu{sub 0.2}O{sub 2} solid solution behaved rather differently under oxidizing conditions, and neither oxidized to form CuO nor fully returned to a bulk Ce{sub 0.8}Cu{sub 0.2}O{sub 2} phase in solid solution. We found that 50% of the Cu returned to a Ce{sub 1-x}Cu{sub x}O{sub 2} solid solution, while the remainder was observed by in situ ETEM to form an amorphous copper oxide phase with a Cu oxidation state similar to Ce{sub 1-x}Cu{sub x}O{sub 2}, but with a local bonding environment similar to CuO. The behavior of the reduced Ce{sub 0.8}Cu{sub 0.2}O{sub 2} reflects strong interactions between Cu and the ceria matrix and illustrates the advantages of working with solid solutions of mixed oxides.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Capsule performance optimization in the National Ignition Campaign

A capsule performance optimization campaign will be conducted at the National Ignition Facility [G. H. Miller et al., Nucl. Fusion 44, 228 (2004)] to substantially increase the probability of ignition by laser-driven hohlraums [J. D. Lindl et al., Phys. Plasmas 11, 339 (2004)]. The campaign will experimentally correct for residual uncertainties in the implosion and hohlraum physics used in our radiation-hydrodynamic computational models before proceeding to cryogenic-layered implosions and ignition attempts. The required tuning techniques using a variety of ignition capsule surrogates have been demonstrated at the OMEGA facility under scaled hohlraum and capsule conditions relevant to the ignition design and shown to meet the required sensitivity and accuracy. In addition, a roll-up of all expected random and systematic uncertainties in setting the key ignition laser and target parameters due to residual measurement, calibration, cross-coupling, surrogacy, and scale-up errors has been derived that meets the required budget.

36 MATERIALS SCIENCE↗

Laboratory study of low- β forces in arched, line-tied magnetic flux ropes

Here, the loss-of-equilibrium is a solar eruption mechanism whereby a sudden breakdown of the magnetohydrodynamic force balance in the Sun's corona ejects a massive burst of particles and energy into the heliosphere. Predicting a loss-of-equilibrium, which has more recently been formulated as the torus instability, relies on a detailed understanding of the various forces that hold the pre-eruption magnetic flux rope in equilibrium. Traditionally, idealized analytical force expressions are used to derive simplified eruption criteria that can be compared to solar observations and modeling. What is missing, however, is a validation that these idealized analytical force expressions can be applied to the line-tied, low-aspect-ratio conditions of the corona. In this paper, we address this shortcoming by using a laboratory experiment to study the forces that act on long-lived, arched, line-tied magnetic flux ropes. Three key force terms are evaluated over a wide range of experimental conditions: (1) the upward hoop force; (2) the downward strapping force; and (3) the downward toroidal field tension force. First, the laboratory force measurements show that, on average, the three aforementioned force terms cancel to produce a balanced line-tied equilibrium. This finding validates the laboratory force measurement techniques developed here, which were recently used to identify a dynamic toroidal field tension force that can prevent flux rope eruption. The verification of magnetic force balance also confirms the low-beta assumption that the plasma thermal pressure is negligible in these experiments. Next, the measured force terms are directly compared to corresponding analytical expressions. While the measured and analytical forces are found to be well correlated, the low-aspect-ratio, line-tied conditions in the experiment are found to both reduce the measured hoop force and increase the measured tension force with respect to analytical expectations. These two co-directed effects combine to generate laboratory flux rope equilibria at lower altitudes than are predicted analytically. Such considerations are expected to modify the loss-of-equilibrium eruption criteria for analogous flux ropes in the solar corona.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ONSET OF FAST MAGNETIC RECONNECTION IN PARTIALLY IONIZED GASES

We consider quasi-stationary two-dimensional magnetic reconnection in a partially ionized incompressible plasma. We find that when the plasma is weakly ionized and the collisions between the ions and the neutral particles are significant, the transition to fast collisionless reconnection due to the Hall effect in the generalized Ohm's law is expected to occur at much lower values of the Lundquist number, as compared to a fully ionized plasma case. We estimate that these conditions for fast reconnection are satisfied in molecular clouds and in protostellar disks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physical properties of a pilot sample of spectroscopic close pair galaxies at z ∼ 2

We use Hubble Space Telescope Wide-field Camera 3 rest-frame optical imaging to select a pilot sample of star-forming galaxies in the redshift range z = 2.00–2.65 whose multi-component morphologies are consistent with expectations for major mergers. We follow up this sample of major merger candidates with Keck/NIRSPEC long-slit spectroscopy obtained in excellent seeing conditions (FWHM ∼0.5 arcsec) to obtain Hα-based redshifts of each of the morphological components in order to distinguish spectroscopic pairs from false pairs created by projection along the line of sight. Of the six candidate pairs observed, companions (estimated mass ratios 5:1 and 7:1) are detected for two galaxies down to a 3σ limiting emission-line flux of ∼10{sup −17} erg s{sup −1} cm{sup −2}. This detection rate is consistent with a ∼50% false-pair fraction at such angular separations (1–2 arcsec) and with recent claims that the star formation rate (SFR) can differ by an order of magnitude between the components in such mergers. The two spectroscopic pairs identified have a total SFR, SFR surface densities, and stellar masses consistent on average with the overall z∼2 star-forming galaxy population.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of the neoclassical ambipolar electric field in ion-root plasmas on W7-X

The role of the radial electric field in high-performance ion-root plasmas on Wendelstein 7-X (W7-X) is examined and compared with neoclassical predictions herein. The W7-X stellarator is the world’s first large-scale optimized stellarator. One of the important targets chosen for optimization during the W7-X design process was the reduction of core neoclassical heat transport. This optimization was targeted for reactor-relevant high-density plasmas with $T_e ≈ T_i$ in which the neoclassical ambipolar radial electric field is expected to be negative throughout the plasmas core. Measurements of the core radial electric field $(E_r)$ have confirmed that ion-root conditions (negative $(E_r)$ in the plasma core) have been achieved in W7-X with high-density plasmas and central ECRH. These measured $(E_r)$ profiles agree well with the neoclassical ambipolar $(E_r)$ predicted by the code SFINCS . This good agreement provides confidence in the validity of neoclassical calculations in high-density ion-root conditions, and enables initial studies on the role of neoclassical transport in the optimized high-density regime of W7-X. Profile measurements of electron temperature $(T_e)$, ion temperature $(T_i)$ and electron density $(n_e)$ along with approximations for the average value of $Z$ eff have been used as inputs to the sfincs code to calculate the ambipolar $E_r$ profile along with neoclassical ion and electron energy flux profiles $(Q$ NCi , $Q$ NCe $)$. Finally the total experimental energy input to the plasma from ECRH heating has been compared to the neoclassical energy fluxes to provide a first estimate for the fraction of transport that can be attributed to neoclassical processes in reactorrelevant high-density ion-root conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatial distribution modelling reveals climatically suitable areas for bumblebees in undersampled parts of the Iberian Peninsula

Abstract The Iberian Peninsula supports a high diversity of bumblebees, with 38 species all of which are at or near the south‐western edge of their range. We might expect them to be threatened by climate change, but their distributions within Iberia are poorly documented. In this study, we examine the climatic conditions that explain the distribution of Iberian bumblebees. Species distribution models (SDMs) were built using a presence‐only technique (Maxent), incorporating presence data of Iberian bumblebees (initially 5795 records for 38 species) with seven climatic variables. We observed that: (i) mountain regions were highlighted as rich in species (bumblebee hot spots); (ii) rare species are climatic specialist species that mainly inhabit mountain regions; (iii) common species are more tolerant of a broader range of climates, notably of higher temperatures; (iv) some areas of Iberia are largely undersampled, including areas predicted to support high bumblebee diversity. We identify areas where targeted searches may reveal undiscovered populations of rare bumblebee species. Obtaining a good knowledge of the current distribution of species is a vital first step towards devising approaches for their conservation.

Penado, Andreia↗

Vapor-liquid-solid growth of <110> silicon nanowire arrays

The epitaxial growth of <110> silicon nanowires on (110) Si substrates by the vapor-liquid-solid growth process was investigated using SiCl 4 as the source gas. A high percentage of <110> nanowires was obtained at high temperatures and reduced SiCl 4 partial pressures. Transmission electron microscopy characterization of the <110> Si nanowires revealed symmetric V-shaped {111} facets at the tip and large {111} facets on the sidewalls of the nanowires. The symmetric {111} tip faceting was explained as arising from low catalyst supersaturation during growth which is expected to occur given the near-equilibrium nature of the SiCl 4 process. Furthermore, the predominance of {111} facets obtained under these conditions promotes the growth of <110> SiNWs.

14 SOLAR ENERGY↗

PEMFC MEA and System Design Considerations

Proton exchange membrane fuel cells (PEMFCs) are being developed and sold commercially for multiple near term markets. Ballard Power Systems is focused on the near term markets of backup power, distributed generation, materials handling, and buses. Significant advances have been made in cost and durability of fuel cell products. Improved tolerance to a wide range of system operation and environmental noises will enable increased viability across a broad range of applications. In order to apply the most effective membrane electrode assembly (MEA) design for each market, the system requirements and associated MEA failures must be well understood. The failure modes associated with the electrodes and membrane degradation are discussed with respect to associated system operation and mitigating approaches. A few key system considerations that influence MEA design include expected fuel quality, balance-of-plant materials, time under idle or open circuit operation, and start-up and shut-down conditions.

08 HYDROGEN↗